| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Deserialization of untrusted data in Microsoft Office SharePoint allows an authorized attacker to execute code over a network. |
| Improper input validation in Microsoft Exchange Server allows an unauthorized attacker to perform spoofing over a network. |
| Taiga is an open source project management platform. In versions 6.8.3 and earlier, Taiga API is vulnerable to time-based blind SQL injection allowing sensitive data disclosure via response timing. This issue is fixed in version 6.9.0. |
| An issue was discovered in Dataphone A920 v2025.07.161103. A custom packet based on public documentation can be crafted, where some fields can contain arbitrary or trivial data. Normally, such data should cause the device to reject the packet. However, due to a lack of validation, the device accepts it with no authetication and triggers the functionality instead. |
| A reflected Cross-Site Scripting (XSS) vulnerability has been identified in Clear2Pay Bank Visibility Application - Payment Execution 1.10.0.104 via the ID parameter in the URL. |
| Astro is a web framework that includes an image proxy. In versions 5.13.4 and later before 5.13.10, the image proxy domain validation can be bypassed by using backslashes in the href parameter, allowing server-side requests to arbitrary URLs. This can lead to server-side request forgery (SSRF) and potentially cross-site scripting (XSS). This vulnerability exists due to an incomplete fix for CVE-2025-58179. Fixed in 5.13.10. |
| Multiple CSRF attack vectors in JDownloads component 1.0.0-4.0.47 for Joomla were discovered. |
| Sliver is a command and control framework that uses a custom Wireguard netstack. In versions 1.5.43 and earlier, and in development version 1.6.0-dev, the netstack does not limit traffic between Wireguard clients. This allows clients to communicate with each other unrestrictedly, potentially enabling leaked or recovered keypairs to be used to attack operators or allowing port forwardings to be accessible from other implants. |
| Opencast is free and open source software for automated video capture and distribution. First noticed in Opencast 13 and 14, Opencast's Elasticsearch integration may generate syntactically invalid Elasticsearch queries in relation to previously acceptable search queries. From Opencast version 11.4 and newer, Elasticsearch queries are retried a configurable number of times in the case of error to handle temporary losses of connection to Elasticsearch. These invalid queries would fail, causing the retry mechanism to begin requerying with the same syntactically invalid query immediately, in an infinite loop. This causes a massive increase in log size which can in some cases cause a denial of service due to disk exhaustion.
Opencast 13.10 and Opencast 14.3 contain patches which address the base issue, with Opencast 16.7 containing changes which harmonize the search behaviour between the admin UI and external API. Users are strongly recommended to upgrade as soon as possible if running versions prior to 13.10 or 14.3. While the relevant endpoints require (by default) `ROLE_ADMIN` or `ROLE_API_SERIES_VIEW`, the problem queries are otherwise innocuous. This issue could be easily triggered by normal administrative work on an affected Opencast system. Those who run a version newer than 13.10 and 14.3 and see different results when searching in their admin UI vs your external API or LMS, may resolve the issue by upgrading to 16.7. No known workarounds for the vulnerability are available. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: socket: Lookup orig tuple for IPv6 SNAT
nf_sk_lookup_slow_v4 does the conntrack lookup for IPv4 packets to
restore the original 5-tuple in case of SNAT, to be able to find the
right socket (if any). Then socket_match() can correctly check whether
the socket was transparent.
However, the IPv6 counterpart (nf_sk_lookup_slow_v6) lacks this
conntrack lookup, making xt_socket fail to match on the socket when the
packet was SNATed. Add the same logic to nf_sk_lookup_slow_v6.
IPv6 SNAT is used in Kubernetes clusters for pod-to-world packets, as
pods' addresses are in the fd00::/8 ULA subnet and need to be replaced
with the node's external address. Cilium leverages Envoy to enforce L7
policies, and Envoy uses transparent sockets. Cilium inserts an iptables
prerouting rule that matches on `-m socket --transparent` and redirects
the packets to localhost, but it fails to match SNATed IPv6 packets due
to that missing conntrack lookup. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Apply the link chain quirk on NEC isoc endpoints
Two clearly different specimens of NEC uPD720200 (one with start/stop
bug, one without) were seen to cause IOMMU faults after some Missed
Service Errors. Faulting address is immediately after a transfer ring
segment and patched dynamic debug messages revealed that the MSE was
received when waiting for a TD near the end of that segment:
[ 1.041954] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ffa08fe0
[ 1.042120] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09000 flags=0x0000]
[ 1.042146] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09040 flags=0x0000]
It gets even funnier if the next page is a ring segment accessible to
the HC. Below, it reports MSE in segment at ff1e8000, plows through a
zero-filled page at ff1e9000 and starts reporting events for TRBs in
page at ff1ea000 every microframe, instead of jumping to seg ff1e6000.
[ 7.041671] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0
[ 7.041999] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0
[ 7.042011] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042028] xhci_hcd: All TDs skipped for slot 1 ep 2. Clear skip flag.
[ 7.042134] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042138] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31
[ 7.042144] xhci_hcd: Looking for event-dma 00000000ff1ea040 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.042259] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042262] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31
[ 7.042266] xhci_hcd: Looking for event-dma 00000000ff1ea050 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
At some point completion events change from Isoch Buffer Overrun to
Short Packet and the HC finally finds cycle bit mismatch in ff1ec000.
[ 7.098130] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13
[ 7.098132] xhci_hcd: Looking for event-dma 00000000ff1ecc50 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.098254] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13
[ 7.098256] xhci_hcd: Looking for event-dma 00000000ff1ecc60 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.098379] xhci_hcd: Overrun event on slot 1 ep 2
It's possible that data from the isochronous device were written to
random buffers of pending TDs on other endpoints (either IN or OUT),
other devices or even other HCs in the same IOMMU domain.
Lastly, an error from a different USB device on another HC. Was it
caused by the above? I don't know, but it may have been. The disk
was working without any other issues and generated PCIe traffic to
starve the NEC of upstream BW and trigger those MSEs. The two HCs
shared one x1 slot by means of a commercial "PCIe splitter" board.
[ 7.162604] usb 10-2: reset SuperSpeed USB device number 3 using xhci_hcd
[ 7.178990] sd 9:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=DRIVER_OK cmd_age=0s
[ 7.179001] sd 9:0:0:0: [sdb] tag#0 CDB: opcode=0x28 28 00 04 02 ae 00 00 02 00 00
[ 7.179004] I/O error, dev sdb, sector 67284480 op 0x0:(READ) flags 0x80700 phys_seg 5 prio class 0
Fortunately, it appears that this ridiculous bug is avoided by setting
the chain bit of Link TRBs on isochronous rings. Other ancient HCs are
known which also expect the bit to be set and they ignore Link TRBs if
it's not. Reportedly, 0.95 spec guaranteed that the bit is set.
The bandwidth-starved NEC HC running a 32KB/uframe UVC endpoint reports
tens of MSEs per second and runs into the bug within seconds. Chaining
Link TRBs allows the same workload to run for many minutes, many times.
No ne
---truncated--- |
| The Auto Featured Image (Auto Post Thumbnail) plugin for WordPress is vulnerable to Server-Side Request Forgery in all versions up to, and including, 4.1.7 via the upload_to_library function. This makes it possible for authenticated attackers, with Author-level access and above, to make web requests to arbitrary locations originating from the web application and can be used to query and modify information from internal services. On Cloud instances, this issue allows for metadata retrieval. |
| Use of Hard-Coded Credentials issue exists in MZK-DP300N version 1.07 and earlier, which may allow an attacker within the local network to log in to the affected device via Telnet and execute arbitrary commands. |
| IPFire versions prior to 2.29 (Core Update 198) contain a stored cross-site scripting (XSS) vulnerability that allows an authenticated attacker to inject arbitrary JavaScript code through the QUOTA_USERS parameter when creating a user quota rule. When a user adds a new user quota rule the application issues an HTTP POST request to /cgi-bin/urlfilter.cgi with the MODE parameter set to USERQUOTA and the assigned user(s) provided in the QUOTA_USERS parameter. The value of this parameter is stored and later rendered in the web interface without proper sanitation or encoding, allowing injected scripts to execute in the context of other users who view the affected quota entry. |
| A flaw was found in Keycloak. The Keycloak guides recommend to not expose /admin path to the outside in case the installation is using a proxy. The issue occurs at least via ha-proxy, as it can be tricked to using relative/non-normalized paths to access the /admin application path relative to /realms which is expected to be exposed. |
| A flaw has been found in MaxSite CMS up to 109. This issue affects some unknown processing of the file application/maxsite/admin/plugins/editor_files/save-file-ajax.php. Executing manipulation of the argument file_path/content can lead to unrestricted upload. The attack can be executed remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| IPFire versions prior to 2.29 (Core Update 198) contain a stored cross-site scripting (XSS) vulnerability that allows an authenticated attacker to inject arbitrary JavaScript code through the IGNORE_ENTRY_REMARK parameter when adding a whitelisted host. When a whitelisted host is added, an HTTP POST request is sent to the Request-URI /cgi-bin/ids.cgi and the remark for the entry is provided in the IGNORE_ENTRY_REMARK parameter. The value of this parameter is stored and later rendered in the web interface without proper sanitization or encoding, allowing injected scripts to execute in the context of other users who view the affected whitelist entry. |
| A vulnerability was detected in MaxSite CMS up to 109. This vulnerability affects unknown code of the file application/maxsite/admin/plugins/auto_post/uploads-require-maxsite.php of the component HTTP Header Handler. Performing manipulation of the argument X-Requested-FileName/X-Requested-FileUpDir results in unrestricted upload. Remote exploitation of the attack is possible. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in code-projects E-Commerce Website 1.0. Affected is an unknown function of the file /pages/product_add.php. The manipulation of the argument prod_name/prod_desc/prod_cost results in cross site scripting. It is possible to launch the attack remotely. The exploit has been made public and could be used. |
| A vulnerability has been found in code-projects E-Commerce Website 1.0. This impacts an unknown function of the file /pages/supplier_add.php. The manipulation of the argument supp_name/supp_address leads to cross site scripting. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
