| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An information disclosure vulnerability exists in multiple WSO2 products due to improper implementation of the enrich mediator. Authenticated users may be able to view unintended business data from other mediation contexts because the internal state is not properly isolated or cleared between executions.
This vulnerability does not impact user credentials or access tokens but may lead to leakage of sensitive business information handled during message flows. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: Fix out-of-bound vmalloc access in imageblit
This issue happens when a userspace program does an ioctl
FBIOPUT_VSCREENINFO passing the fb_var_screeninfo struct
containing only the fields xres, yres, and bits_per_pixel
with values.
If this struct is the same as the previous ioctl, the
vc_resize() detects it and doesn't call the resize_screen(),
leaving the fb_var_screeninfo incomplete. And this leads to
the updatescrollmode() calculates a wrong value to
fbcon_display->vrows, which makes the real_y() return a
wrong value of y, and that value, eventually, causes
the imageblit to access an out-of-bound address value.
To solve this issue I made the resize_screen() be called
even if the screen does not need any resizing, so it will
"fix and fill" the fb_var_screeninfo independently. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Fix RPC client cleaned up the freed pipefs dentries
RPC client pipefs dentries cleanup is in separated rpc_remove_pipedir()
workqueue,which takes care about pipefs superblock locking.
In some special scenarios, when kernel frees the pipefs sb of the
current client and immediately alloctes a new pipefs sb,
rpc_remove_pipedir function would misjudge the existence of pipefs
sb which is not the one it used to hold. As a result,
the rpc_remove_pipedir would clean the released freed pipefs dentries.
To fix this issue, rpc_remove_pipedir should check whether the
current pipefs sb is consistent with the original pipefs sb.
This error can be catched by KASAN:
=========================================================
[ 250.497700] BUG: KASAN: slab-use-after-free in dget_parent+0x195/0x200
[ 250.498315] Read of size 4 at addr ffff88800a2ab804 by task kworker/0:18/106503
[ 250.500549] Workqueue: events rpc_free_client_work
[ 250.501001] Call Trace:
[ 250.502880] kasan_report+0xb6/0xf0
[ 250.503209] ? dget_parent+0x195/0x200
[ 250.503561] dget_parent+0x195/0x200
[ 250.503897] ? __pfx_rpc_clntdir_depopulate+0x10/0x10
[ 250.504384] rpc_rmdir_depopulate+0x1b/0x90
[ 250.504781] rpc_remove_client_dir+0xf5/0x150
[ 250.505195] rpc_free_client_work+0xe4/0x230
[ 250.505598] process_one_work+0x8ee/0x13b0
...
[ 22.039056] Allocated by task 244:
[ 22.039390] kasan_save_stack+0x22/0x50
[ 22.039758] kasan_set_track+0x25/0x30
[ 22.040109] __kasan_slab_alloc+0x59/0x70
[ 22.040487] kmem_cache_alloc_lru+0xf0/0x240
[ 22.040889] __d_alloc+0x31/0x8e0
[ 22.041207] d_alloc+0x44/0x1f0
[ 22.041514] __rpc_lookup_create_exclusive+0x11c/0x140
[ 22.041987] rpc_mkdir_populate.constprop.0+0x5f/0x110
[ 22.042459] rpc_create_client_dir+0x34/0x150
[ 22.042874] rpc_setup_pipedir_sb+0x102/0x1c0
[ 22.043284] rpc_client_register+0x136/0x4e0
[ 22.043689] rpc_new_client+0x911/0x1020
[ 22.044057] rpc_create_xprt+0xcb/0x370
[ 22.044417] rpc_create+0x36b/0x6c0
...
[ 22.049524] Freed by task 0:
[ 22.049803] kasan_save_stack+0x22/0x50
[ 22.050165] kasan_set_track+0x25/0x30
[ 22.050520] kasan_save_free_info+0x2b/0x50
[ 22.050921] __kasan_slab_free+0x10e/0x1a0
[ 22.051306] kmem_cache_free+0xa5/0x390
[ 22.051667] rcu_core+0x62c/0x1930
[ 22.051995] __do_softirq+0x165/0x52a
[ 22.052347]
[ 22.052503] Last potentially related work creation:
[ 22.052952] kasan_save_stack+0x22/0x50
[ 22.053313] __kasan_record_aux_stack+0x8e/0xa0
[ 22.053739] __call_rcu_common.constprop.0+0x6b/0x8b0
[ 22.054209] dentry_free+0xb2/0x140
[ 22.054540] __dentry_kill+0x3be/0x540
[ 22.054900] shrink_dentry_list+0x199/0x510
[ 22.055293] shrink_dcache_parent+0x190/0x240
[ 22.055703] do_one_tree+0x11/0x40
[ 22.056028] shrink_dcache_for_umount+0x61/0x140
[ 22.056461] generic_shutdown_super+0x70/0x590
[ 22.056879] kill_anon_super+0x3a/0x60
[ 22.057234] rpc_kill_sb+0x121/0x200 |
| Missing Authorization vulnerability in printcart Printcart Web to Print Product Designer for WooCommerce allows Exploiting Incorrectly Configured Access Control Security Levels. This issue affects Printcart Web to Print Product Designer for WooCommerce: from n/a through 2.4.3. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvlan: add ipvlan_route_v6_outbound() helper
Inspired by syzbot reports using a stack of multiple ipvlan devices.
Reduce stack size needed in ipvlan_process_v6_outbound() by moving
the flowi6 struct used for the route lookup in an non inlined
helper. ipvlan_route_v6_outbound() needs 120 bytes on the stack,
immediately reclaimed.
Also make sure ipvlan_process_v4_outbound() is not inlined.
We might also have to lower MAX_NEST_DEV, because only syzbot uses
setups with more than four stacked devices.
BUG: TASK stack guard page was hit at ffffc9000e803ff8 (stack is ffffc9000e804000..ffffc9000e808000)
stack guard page: 0000 [#1] SMP KASAN
CPU: 0 PID: 13442 Comm: syz-executor.4 Not tainted 6.1.52-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023
RIP: 0010:kasan_check_range+0x4/0x2a0 mm/kasan/generic.c:188
Code: 48 01 c6 48 89 c7 e8 db 4e c1 03 31 c0 5d c3 cc 0f 0b eb 02 0f 0b b8 ea ff ff ff 5d c3 cc 00 00 cc cc 00 00 cc cc 55 48 89 e5 <41> 57 41 56 41 55 41 54 53 b0 01 48 85 f6 0f 84 a4 01 00 00 48 89
RSP: 0018:ffffc9000e804000 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817e5bf2
RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff887c6568
RBP: ffffc9000e804000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff92001d0080c
R13: dffffc0000000000 R14: ffffffff87e6b100 R15: 0000000000000000
FS: 00007fd0c55826c0(0000) GS:ffff8881f6800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffc9000e803ff8 CR3: 0000000170ef7000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<#DF>
</#DF>
<TASK>
[<ffffffff81f281d1>] __kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31
[<ffffffff817e5bf2>] instrument_atomic_read include/linux/instrumented.h:72 [inline]
[<ffffffff817e5bf2>] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
[<ffffffff817e5bf2>] cpumask_test_cpu include/linux/cpumask.h:506 [inline]
[<ffffffff817e5bf2>] cpu_online include/linux/cpumask.h:1092 [inline]
[<ffffffff817e5bf2>] trace_lock_acquire include/trace/events/lock.h:24 [inline]
[<ffffffff817e5bf2>] lock_acquire+0xe2/0x590 kernel/locking/lockdep.c:5632
[<ffffffff8563221e>] rcu_lock_acquire+0x2e/0x40 include/linux/rcupdate.h:306
[<ffffffff8561464d>] rcu_read_lock include/linux/rcupdate.h:747 [inline]
[<ffffffff8561464d>] ip6_pol_route+0x15d/0x1440 net/ipv6/route.c:2221
[<ffffffff85618120>] ip6_pol_route_output+0x50/0x80 net/ipv6/route.c:2606
[<ffffffff856f65b5>] pol_lookup_func include/net/ip6_fib.h:584 [inline]
[<ffffffff856f65b5>] fib6_rule_lookup+0x265/0x620 net/ipv6/fib6_rules.c:116
[<ffffffff85618009>] ip6_route_output_flags_noref+0x2d9/0x3a0 net/ipv6/route.c:2638
[<ffffffff8561821a>] ip6_route_output_flags+0xca/0x340 net/ipv6/route.c:2651
[<ffffffff838bd5a3>] ip6_route_output include/net/ip6_route.h:100 [inline]
[<ffffffff838bd5a3>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:473 [inline]
[<ffffffff838bd5a3>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline]
[<ffffffff838bd5a3>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
[<ffffffff838bd5a3>] ipvlan_queue_xmit+0xc33/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677
[<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229
[<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline]
[<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline]
[<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660
[<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324
[<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline]
[<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline]
[<f
---truncated--- |
| DNN (formerly DotNetNuke) is an open-source web content management platform (CMS) in the Microsoft ecosystem. Prior to version 10.1.0, arbitrary themes can be loaded through query parameters. If an installed theme had a vulnerability, even if it was not used on any page, this could be loaded on unsuspecting clients without knowledge of the site owner. This issue has been patched in version 10.1.0. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Do not try to cleanup after cxl_region_setup_targets() fails
Commit 5e42bcbc3fef ("cxl/region: decrement ->nr_targets on error in
cxl_region_attach()") tried to avoid 'eiw' initialization errors when
->nr_targets exceeded 16, by just decrementing ->nr_targets when
cxl_region_setup_targets() failed.
Commit 86987c766276 ("cxl/region: Cleanup target list on attach error")
extended that cleanup to also clear cxled->pos and p->targets[pos]. The
initialization error was incidentally fixed separately by:
Commit 8d4285425714 ("cxl/region: Fix port setup uninitialized variable
warnings") which was merged a few days after 5e42bcbc3fef.
But now the original cleanup when cxl_region_setup_targets() fails
prevents endpoint and switch decoder resources from being reused:
1) the cleanup does not set the decoder's region to NULL, which results
in future dpa_size_store() calls returning -EBUSY
2) the decoder is not properly freed, which results in future commit
errors associated with the upstream switch
Now that the initialization errors were fixed separately, the proper
cleanup for this case is to just return immediately. Then the resources
associated with this target get cleanup up as normal when the failed
region is deleted.
The ->nr_targets decrement in the error case also helped prevent
a p->targets[] array overflow, so add a new check to prevent against
that overflow.
Tested by trying to create an invalid region for a 2 switch * 2 endpoint
topology, and then following up with creating a valid region. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmalloc: combine all TLB flush operations of KASAN shadow virtual address into one operation
When compiling kernel source 'make -j $(nproc)' with the up-and-running
KASAN-enabled kernel on a 256-core machine, the following soft lockup is
shown:
watchdog: BUG: soft lockup - CPU#28 stuck for 22s! [kworker/28:1:1760]
CPU: 28 PID: 1760 Comm: kworker/28:1 Kdump: loaded Not tainted 6.10.0-rc5 #95
Workqueue: events drain_vmap_area_work
RIP: 0010:smp_call_function_many_cond+0x1d8/0xbb0
Code: 38 c8 7c 08 84 c9 0f 85 49 08 00 00 8b 45 08 a8 01 74 2e 48 89 f1 49 89 f7 48 c1 e9 03 41 83 e7 07 4c 01 e9 41 83 c7 03 f3 90 <0f> b6 01 41 38 c7 7c 08 84 c0 0f 85 d4 06 00 00 8b 45 08 a8 01 75
RSP: 0018:ffffc9000cb3fb60 EFLAGS: 00000202
RAX: 0000000000000011 RBX: ffff8883bc4469c0 RCX: ffffed10776e9949
RDX: 0000000000000002 RSI: ffff8883bb74ca48 RDI: ffffffff8434dc50
RBP: ffff8883bb74ca40 R08: ffff888103585dc0 R09: ffff8884533a1800
R10: 0000000000000004 R11: ffffffffffffffff R12: ffffed1077888d39
R13: dffffc0000000000 R14: ffffed1077888d38 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff8883bc400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005577b5c8d158 CR3: 0000000004850000 CR4: 0000000000350ef0
Call Trace:
<IRQ>
? watchdog_timer_fn+0x2cd/0x390
? __pfx_watchdog_timer_fn+0x10/0x10
? __hrtimer_run_queues+0x300/0x6d0
? sched_clock_cpu+0x69/0x4e0
? __pfx___hrtimer_run_queues+0x10/0x10
? srso_return_thunk+0x5/0x5f
? ktime_get_update_offsets_now+0x7f/0x2a0
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? hrtimer_interrupt+0x2ca/0x760
? __sysvec_apic_timer_interrupt+0x8c/0x2b0
? sysvec_apic_timer_interrupt+0x6a/0x90
</IRQ>
<TASK>
? asm_sysvec_apic_timer_interrupt+0x16/0x20
? smp_call_function_many_cond+0x1d8/0xbb0
? __pfx_do_kernel_range_flush+0x10/0x10
on_each_cpu_cond_mask+0x20/0x40
flush_tlb_kernel_range+0x19b/0x250
? srso_return_thunk+0x5/0x5f
? kasan_release_vmalloc+0xa7/0xc0
purge_vmap_node+0x357/0x820
? __pfx_purge_vmap_node+0x10/0x10
__purge_vmap_area_lazy+0x5b8/0xa10
drain_vmap_area_work+0x21/0x30
process_one_work+0x661/0x10b0
worker_thread+0x844/0x10e0
? srso_return_thunk+0x5/0x5f
? __kthread_parkme+0x82/0x140
? __pfx_worker_thread+0x10/0x10
kthread+0x2a5/0x370
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Debugging Analysis:
1. The following ftrace log shows that the lockup CPU spends too much
time iterating vmap_nodes and flushing TLB when purging vm_area
structures. (Some info is trimmed).
kworker: funcgraph_entry: | drain_vmap_area_work() {
kworker: funcgraph_entry: | mutex_lock() {
kworker: funcgraph_entry: 1.092 us | __cond_resched();
kworker: funcgraph_exit: 3.306 us | }
... ...
kworker: funcgraph_entry: | flush_tlb_kernel_range() {
... ...
kworker: funcgraph_exit: # 7533.649 us | }
... ...
kworker: funcgraph_entry: 2.344 us | mutex_unlock();
kworker: funcgraph_exit: $ 23871554 us | }
The drain_vmap_area_work() spends over 23 seconds.
There are 2805 flush_tlb_kernel_range() calls in the ftrace log.
* One is called in __purge_vmap_area_lazy().
* Others are called by purge_vmap_node->kasan_release_vmalloc.
purge_vmap_node() iteratively releases kasan vmalloc
allocations and flushes TLB for each vmap_area.
- [Rough calculation] Each flush_tlb_kernel_range() runs
about 7.5ms.
-- 2804 * 7.5ms = 21.03 seconds.
-- That's why a soft lock is triggered.
2. Extending the soft lockup time can work around the issue (For example,
# echo
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
swiotlb: fix out-of-bounds TLB allocations with CONFIG_SWIOTLB_DYNAMIC
Limit the free list length to the size of the IO TLB. Transient pool can be
smaller than IO_TLB_SEGSIZE, but the free list is initialized with the
assumption that the total number of slots is a multiple of IO_TLB_SEGSIZE.
As a result, swiotlb_area_find_slots() may allocate slots past the end of
a transient IO TLB buffer. |
| A vulnerability was found in axboe fio up to 3.41. This affects the function str_buffer_pattern_cb of the file options.c. Performing manipulation results in null pointer dereference. The attack must be initiated from a local position. The exploit has been made public and could be used. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: avoid data corruption caused by decline
We found a data corruption issue during testing of SMC-R on Redis
applications.
The benchmark has a low probability of reporting a strange error as
shown below.
"Error: Protocol error, got "\xe2" as reply type byte"
Finally, we found that the retrieved error data was as follows:
0xE2 0xD4 0xC3 0xD9 0x04 0x00 0x2C 0x20 0xA6 0x56 0x00 0x16 0x3E 0x0C
0xCB 0x04 0x02 0x01 0x00 0x00 0x20 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xE2
It is quite obvious that this is a SMC DECLINE message, which means that
the applications received SMC protocol message.
We found that this was caused by the following situations:
client server
¦ clc proposal
------------->
¦ clc accept
<-------------
¦ clc confirm
------------->
wait llc confirm
send llc confirm
¦failed llc confirm
¦ x------
(after 2s)timeout
wait llc confirm rsp
wait decline
(after 1s) timeout
(after 2s) timeout
¦ decline
-------------->
¦ decline
<--------------
As a result, a decline message was sent in the implementation, and this
message was read from TCP by the already-fallback connection.
This patch double the client timeout as 2x of the server value,
With this simple change, the Decline messages should never cross or
collide (during Confirm link timeout).
This issue requires an immediate solution, since the protocol updates
involve a more long-term solution. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: protect device queue against concurrent access
In dasd_profile_start() the amount of requests on the device queue are
counted. The access to the device queue is unprotected against
concurrent access. With a lot of parallel I/O, especially with alias
devices enabled, the device queue can change while dasd_profile_start()
is accessing the queue. In the worst case this leads to a kernel panic
due to incorrect pointer accesses.
Fix this by taking the device lock before accessing the queue and
counting the requests. Additionally the check for a valid profile data
pointer can be done earlier to avoid unnecessary locking in a hot path. |
| Exposure of Sensitive System Information to an Unauthorized Control Sphere vulnerability in Nurul Amin WP System Information allows Retrieve Embedded Sensitive Data. This issue affects WP System Information: from n/a through 1.5. |
| An authenticated stored cross-site scripting (XSS) vulnerability exists in multiple WSO2 products due to improper validation of user-supplied input during API document upload in the Publisher portal. A user with publisher privileges can upload a crafted API document containing malicious JavaScript, which is later rendered in the browser when accessed by other users.
A successful attack could result in redirection to malicious websites, unauthorized UI modifications, or exfiltration of browser-accessible data. However, session-related sensitive cookies are protected by the httpOnly flag, preventing session hijacking. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/port: Fix delete_endpoint() vs parent unregistration race
The CXL subsystem, at cxl_mem ->probe() time, establishes a lineage of
ports (struct cxl_port objects) between an endpoint and the root of a
CXL topology. Each port including the endpoint port is attached to the
cxl_port driver.
Given that setup, it follows that when either any port in that lineage
goes through a cxl_port ->remove() event, or the memdev goes through a
cxl_mem ->remove() event. The hierarchy below the removed port, or the
entire hierarchy if the memdev is removed needs to come down.
The delete_endpoint() callback is careful to check whether it is being
called to tear down the hierarchy, or if it is only being called to
teardown the memdev because an ancestor port is going through
->remove().
That care needs to take the device_lock() of the endpoint's parent.
Which requires 2 bugs to be fixed:
1/ A reference on the parent is needed to prevent use-after-free
scenarios like this signature:
BUG: spinlock bad magic on CPU#0, kworker/u56:0/11
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc38 05/24/2023
Workqueue: cxl_port detach_memdev [cxl_core]
RIP: 0010:spin_bug+0x65/0xa0
Call Trace:
do_raw_spin_lock+0x69/0xa0
__mutex_lock+0x695/0xb80
delete_endpoint+0xad/0x150 [cxl_core]
devres_release_all+0xb8/0x110
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1d2/0x210
detach_memdev+0x15/0x20 [cxl_core]
process_one_work+0x1e3/0x4c0
worker_thread+0x1dd/0x3d0
2/ In the case of RCH topologies, the parent device that needs to be
locked is not always @port->dev as returned by cxl_mem_find_port(), use
endpoint->dev.parent instead. |
| A vulnerability was determined in axboe fio up to 3.41. This impacts the function __parse_jobs_ini of the file init.c. Executing manipulation can lead to use after free. The attack needs to be launched locally. The exploit has been publicly disclosed and may be utilized. |
| A vulnerability was identified in Campcodes Online Beauty Parlor Management System 1.0. Affected is an unknown function of the file /admin/view-appointment.php. The manipulation of the argument viewid leads to sql injection. The attack can be initiated remotely. The exploit is publicly available and might be used. |
| In the Linux kernel, the following vulnerability has been resolved:
media: gspca: cpia1: shift-out-of-bounds in set_flicker
Syzkaller reported the following issue:
UBSAN: shift-out-of-bounds in drivers/media/usb/gspca/cpia1.c:1031:27
shift exponent 245 is too large for 32-bit type 'int'
When the value of the variable "sd->params.exposure.gain" exceeds the
number of bits in an integer, a shift-out-of-bounds error is reported. It
is triggered because the variable "currentexp" cannot be left-shifted by
more than the number of bits in an integer. In order to avoid invalid
range during left-shift, the conditional expression is added. |
| A security flaw has been discovered in Campcodes Online Beauty Parlor Management System 1.0. Affected by this vulnerability is an unknown functionality of the file /admin/sales-reports-detail.php. The manipulation of the argument fromdate/todate results in sql injection. The attack can be launched remotely. The exploit has been released to the public and may be exploited. |
| A weakness has been identified in PHPJabbers Restaurant Menu Maker up to 1.1. Affected by this issue is some unknown functionality of the file /preview.php. This manipulation of the argument theme causes cross site scripting. The attack may be initiated remotely. The exploit has been made available to the public and could be exploited. |
