| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The error page mechanism of the Java Servlet Specification requires that, when an error occurs and an error page is configured for the error that occurred, the original request and response are forwarded to the error page. This means that the request is presented to the error page with the original HTTP method. If the error page is a static file, expected behaviour is to serve content of the file as if processing a GET request, regardless of the actual HTTP method. The Default Servlet in Apache Tomcat 9.0.0.M1 to 9.0.0.M20, 8.5.0 to 8.5.14, 8.0.0.RC1 to 8.0.43 and 7.0.0 to 7.0.77 did not do this. Depending on the original request this could lead to unexpected and undesirable results for static error pages including, if the DefaultServlet is configured to permit writes, the replacement or removal of the custom error page. Notes for other user provided error pages: (1) Unless explicitly coded otherwise, JSPs ignore the HTTP method. JSPs used as error pages must must ensure that they handle any error dispatch as a GET request, regardless of the actual method. (2) By default, the response generated by a Servlet does depend on the HTTP method. Custom Servlets used as error pages must ensure that they handle any error dispatch as a GET request, regardless of the actual method. |
| The setGlobalContext method in org/apache/naming/factory/ResourceLinkFactory.java in Apache Tomcat 7.x before 7.0.68, 8.x before 8.0.31, and 9.x before 9.0.0.M3 does not consider whether ResourceLinkFactory.setGlobalContext callers are authorized, which allows remote authenticated users to bypass intended SecurityManager restrictions and read or write to arbitrary application data, or cause a denial of service (application disruption), via a web application that sets a crafted global context. |
| The session-persistence implementation in Apache Tomcat 6.x before 6.0.45, 7.x before 7.0.68, 8.x before 8.0.31, and 9.x before 9.0.0.M2 mishandles session attributes, which allows remote authenticated users to bypass intended SecurityManager restrictions and execute arbitrary code in a privileged context via a web application that places a crafted object in a session. |
| Incorrect Privilege Assignment vulnerability in WP ManageNinja LLC Fluent CRM fluent-crm allows Privilege Escalation.This issue affects Fluent CRM: from n/a through 3.2.5. |
| The WholesaleX – B2B & Wholesale Plugin for WooCommerce with Wholesale Prices plugin for WordPress is vulnerable to Limited Privilege Escalation in all versions up to, and including, 3.0.8 via the 'process_registration' due to missing validation on the 'wholesalex_registration_role' parameter. This makes it possible for unauthenticated attackers to register as any existing WholesaleX role. The vulnerability was partially patched in version 2.3.8. |
| Incorrect Privilege Assignment vulnerability in Shabti Kaplan Frontend Admin by DynamiApps acf-frontend-form-element allows Privilege Escalation.This issue affects Frontend Admin by DynamiApps: from n/a through 3.29.13. |
| Rapyd Admin from 9.0.0 before 9.20.0 contains an improper privilege management vulnerability in the UsersEdit Livewire component that allows users with the edit users permission to assign themselves the admin role. Attackers holding roles such as the shipped operator role can submit the admin role ID for their own account, lifting tenant scoping, bypassing per-record authorization, and enabling impersonation. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to 41.10.6, 42.9.2, 43.4.1, and 44.0.0-beta.5, windows opened from a sandboxed top-level document did not inherit that document's active HTML sandbox restrictions. Untrusted content in a sandboxed top-level document that was permitted to open popups could therefore create a window with the Electron application's full origin instead of the restricted origin intended by the sandbox. Applications that deny such popups with setWindowOpenHandler are not affected. This issue is fixed in versions 41.10.6, 42.9.2, 43.4.1, and 44.0.0-beta.5. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to 41.10.6, 42.9.2, 43.4.1, and 44.0.0-beta.5, an Electron <webview> guest could enable nodeIntegrationInWorker for its Web Workers even when the unsandboxed embedder had Node.js integration disabled, allowing untrusted guest content to create a Node-enabled worker with more privilege than the embedder granted. Applications that do not enable the <webview> tag or that keep the embedder sandboxed are not affected. This issue is fixed in versions 41.10.6, 42.9.2, 43.4.1, and 44.0.0-beta.5. |
| The User Rights Access Manager WordPress plugin through 1.1.3 does not restrict access to one of its AJAX account-registration handlers and assigns newly registered accounts a role that was created as a copy of the administrator role, allowing unauthenticated attackers to register an administrator-equivalent account and take over the site. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix maximum allowed access checks
The DACL permission check looks for an ACE matching the current user and
falls back to the Everyone ACE. It does not consider an Authenticated
Users ACE, even though an authenticated session is a member of that
well-known group.
As a result, opening a file whose access is granted through S-1-5-11 can
incorrectly fail with STATUS_ACCESS_DENIED. Treat an Authenticated Users
ACE as a fallback entry alongside Everyone.
The maximal access calculation also combines access masks from every ACE,
regardless of whether its SID applies to the current user. This can grant
rights belonging to an unrelated principal. Process only ACEs applying to
the user, Everyone, or Authenticated Users, and accumulate allowed and
denied masks in ACL order. Preserve explicitly requested access bits so
they are validated against the resulting maximal mask.
When ACCESS_SYSTEM_SECURITY is denied, report STATUS_PRIVILEGE_NOT_HELD
instead of the generic STATUS_ACCESS_DENIED. Access to the system ACL
requires a security privilege that ksmbd does not grant.
For regular files, include FILE_EXECUTE in maximal access when the client
requested GENERIC_EXECUTE and the DACL grants the complete file-read set.
Keep a direct FILE_EXECUTE request subject to the explicit DACL bit. This
matches the POSIX file ACL mapping without broadening specific execute
requests.
Do not replace rights from an applicable NT ACE with a POSIX ACL entry.
The POSIX ACL is only a fallback when no user, Everyone, or Authenticated
Users ACE applies; otherwise it can incorrectly broaden the stored DACL.
This fixes smb2.maximum_allowed.maximum_allowed. |
| The Bit integrations – Form Integration, Webhook, Spreadsheets, CRM, LMS & Email Automation plugin for WordPress is vulnerable to Privilege Escalation via Log Re-execution in all versions up to, and including, 2.10.6 The vulnerability exists because `IntegrationHandler::executeWithCapture()` stores raw, attacker-controlled field values — including `user_pass` and `user_email` — verbatim into `wp_btcbi_log.field_data` on anonymous front-end requests with no capability check, and `LogHandler::reexecute()` feeds that stored payload back through `Flow::execute()` inside the replaying administrator's session without validating the identity that originally produced the data, causing `RegistrationController::updateUser()` to resolve the target user ID to the administrator and write the attacker-supplied password via `wp_update_user()`. This makes it possible for unauthenticated attackers to overwrite the administrator's password and fully take over the administrator account. Exploitation requires that an administrator has configured a flow mapping a user-supplied form field to the `user_pass` parameter of the WP User Registration "Update User" action, and that the administrator subsequently clicks "Re-execute" on the failure log row produced by the anonymous submission from the plugin's log screen. |
| A flaw was found in FreeIPA. When a trust relationship is configured between FreeIPA and Active Directory, Active Directory users can bypass authentication for FreeIPA services, including the portal, SMB server, and LDAP directory. This is possible by impersonating a client name in the Ticket Granting Service (TGS) due to FreeIPA services not verifying Privilege Attribute Certificate (PAC) certificates. This vulnerability could allow an authenticated Active Directory user to escalate their privileges within the FreeIPA domain. |
| Grav grav-plugin-api before 1.0.36 contains a privilege escalation vulnerability that allows delegated user managers to obtain super-admin access by storing positive scalar admin or api parent grants. Attackers with api.users.write can edit account access maps or invitations so the inheriting permission resolver satisfies requireSuper checks, accessing super-only API endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options
This patch restricts setting Loose Source and Record Route (LSRR)
and Strict Source and Record Route (SSRR) IP options to users
with CAP_NET_RAW capability.
This prevents unprivileged applications from forcing packets to route
through attacker-controlled nodes to leak TCP ISN and possibly other
protocol information.
While LSRR and SSRR are commonly filtered in many network environments,
they may still be supported and forwarded along some network paths.
RFC 7126 (Recommendations on Filtering of IPv4 Packets Containing
IPv4 Options) recommend to drop these options in 4.3 and 4.4. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: restrict SO_ATTACH_FILTER to priv users
This patch restricts the use of SO_ATTACH_FILTER (cBPF) on TCP sockets
to users with CAP_NET_ADMIN capability.
This blocks potential side-channel attack where an unprivileged application
attaches a filter to leak TCP sequence/acknowledgment numbers. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: reject fuse_notify() pagecache ops on directories
The operations FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE allow the
FUSE daemon to actively write/read pagecache contents.
For directories with FOPEN_CACHE_DIR, the pagecache is used as
kernel-internal cache storage, and userspace is not supposed to have
direct access to this cache - in particular, fuse_parse_cache() will hit
WARN_ON() if the cache contains bogus data.
Reject FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE on anything other than
regular files with -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
ptrace: slightly saner 'get_dumpable()' logic
The 'dumpability' of a task is fundamentally about the memory image of
the task - the concept comes from whether it can core dump or not - and
makes no sense when you don't have an associated mm.
And almost all users do in fact use it only for the case where the task
has a mm pointer.
But we have one odd special case: ptrace_may_access() uses 'dumpable' to
check various other things entirely independently of the MM (typically
explicitly using flags like PTRACE_MODE_READ_FSCREDS). Including for
threads that no longer have a VM (and maybe never did, like most kernel
threads).
It's not what this flag was designed for, but it is what it is.
The ptrace code does check that the uid/gid matches, so you do have to
be uid-0 to see kernel thread details, but this means that the
traditional "drop capabilities" model doesn't make any difference for
this all.
Make it all make a *bit* more sense by saying that if you don't have a
MM pointer, we'll use a cached "last dumpability" flag if the thread
ever had a MM (it will be zero for kernel threads since it is never
set), and require a proper CAP_SYS_PTRACE capability to override. |
| IBM i 7.3, 7.4, 7.5, and 7.6 could allow a local attacker to modify the BOOTP table due to improper authorization. |
| systemd before 247 does not adequately block local privilege escalation for some Sudo configurations, e.g., plausible sudoers files in which the "systemctl status" command may be executed. Specifically, systemd does not set LESSSECURE to 1, and thus other programs may be launched from the less program. This presents a substantial security risk when running systemctl from Sudo, because less executes as root when the terminal size is too small to show the complete systemctl output. |
