Total
5495 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-50027 | 1 Linux | 1 Linux Kernel | 2024-11-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thermal: core: Free tzp copy along with the thermal zone The object pointed to by tz->tzp may still be accessed after being freed in thermal_zone_device_unregister(), so move the freeing of it to the point after the removal completion has been completed at which it cannot be accessed any more. | ||||
| CVE-2024-49982 | 1 Linux | 1 Linux Kernel | 2024-11-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: aoe: fix the potential use-after-free problem in more places For fixing CVE-2023-6270, f98364e92662 ("aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts") makes tx() calling dev_put() instead of doing in aoecmd_cfg_pkts(). It avoids that the tx() runs into use-after-free. Then Nicolai Stange found more places in aoe have potential use-after-free problem with tx(). e.g. revalidate(), aoecmd_ata_rw(), resend(), probe() and aoecmd_cfg_rsp(). Those functions also use aoenet_xmit() to push packet to tx queue. So they should also use dev_hold() to increase the refcnt of skb->dev. On the other hand, moving dev_put() to tx() causes that the refcnt of skb->dev be reduced to a negative value, because corresponding dev_hold() are not called in revalidate(), aoecmd_ata_rw(), resend(), probe(), and aoecmd_cfg_rsp(). This patch fixed this issue. | ||||
| CVE-2024-49981 | 1 Linux | 1 Linux Kernel | 2024-11-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: media: venus: fix use after free bug in venus_remove due to race condition in venus_probe, core->work is bound with venus_sys_error_handler, which is used to handle error. The code use core->sys_err_done to make sync work. The core->work is started in venus_event_notify. If we call venus_remove, there might be an unfished work. The possible sequence is as follows: CPU0 CPU1 |venus_sys_error_handler venus_remove | hfi_destroy | venus_hfi_destroy | kfree(hdev); | |hfi_reinit |venus_hfi_queues_reinit |//use hdev Fix it by canceling the work in venus_remove. | ||||
| CVE-2024-49966 | 1 Linux | 1 Linux Kernel | 2024-11-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: cancel dqi_sync_work before freeing oinfo ocfs2_global_read_info() will initialize and schedule dqi_sync_work at the end, if error occurs after successfully reading global quota, it will trigger the following warning with CONFIG_DEBUG_OBJECTS_* enabled: ODEBUG: free active (active state 0) object: 00000000d8b0ce28 object type: timer_list hint: qsync_work_fn+0x0/0x16c This reports that there is an active delayed work when freeing oinfo in error handling, so cancel dqi_sync_work first. BTW, return status instead of -1 when .read_file_info fails. | ||||
| CVE-2024-49924 | 1 Linux | 1 Linux Kernel | 2024-11-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: pxafb: Fix possible use after free in pxafb_task() In the pxafb_probe function, it calls the pxafb_init_fbinfo function, after which &fbi->task is associated with pxafb_task. Moreover, within this pxafb_init_fbinfo function, the pxafb_blank function within the &pxafb_ops struct is capable of scheduling work. If we remove the module which will call pxafb_remove to make cleanup, it will call unregister_framebuffer function which can call do_unregister_framebuffer to free fbi->fb through put_fb_info(fb_info), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | pxafb_task pxafb_remove | unregister_framebuffer(info) | do_unregister_framebuffer(fb_info) | put_fb_info(fb_info) | // free fbi->fb | set_ctrlr_state(fbi, state) | __pxafb_lcd_power(fbi, 0) | fbi->lcd_power(on, &fbi->fb.var) | //use fbi->fb Fix it by ensuring that the work is canceled before proceeding with the cleanup in pxafb_remove. Note that only root user can remove the driver at runtime. | ||||
| CVE-2024-49903 | 1 Linux | 1 Linux Kernel | 2024-11-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: jfs: Fix uaf in dbFreeBits [syzbot reported] ================================================================== BUG: KASAN: slab-use-after-free in __mutex_lock_common kernel/locking/mutex.c:587 [inline] BUG: KASAN: slab-use-after-free in __mutex_lock+0xfe/0xd70 kernel/locking/mutex.c:752 Read of size 8 at addr ffff8880229254b0 by task syz-executor357/5216 CPU: 0 UID: 0 PID: 5216 Comm: syz-executor357 Not tainted 6.11.0-rc3-syzkaller-00156-gd7a5aa4b3c00 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 __mutex_lock_common kernel/locking/mutex.c:587 [inline] __mutex_lock+0xfe/0xd70 kernel/locking/mutex.c:752 dbFreeBits+0x7ea/0xd90 fs/jfs/jfs_dmap.c:2390 dbFreeDmap fs/jfs/jfs_dmap.c:2089 [inline] dbFree+0x35b/0x680 fs/jfs/jfs_dmap.c:409 dbDiscardAG+0x8a9/0xa20 fs/jfs/jfs_dmap.c:1650 jfs_ioc_trim+0x433/0x670 fs/jfs/jfs_discard.c:100 jfs_ioctl+0x2d0/0x3e0 fs/jfs/ioctl.c:131 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 Freed by task 5218: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object+0xe0/0x150 mm/kasan/common.c:240 __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2252 [inline] slab_free mm/slub.c:4473 [inline] kfree+0x149/0x360 mm/slub.c:4594 dbUnmount+0x11d/0x190 fs/jfs/jfs_dmap.c:278 jfs_mount_rw+0x4ac/0x6a0 fs/jfs/jfs_mount.c:247 jfs_remount+0x3d1/0x6b0 fs/jfs/super.c:454 reconfigure_super+0x445/0x880 fs/super.c:1083 vfs_cmd_reconfigure fs/fsopen.c:263 [inline] vfs_fsconfig_locked fs/fsopen.c:292 [inline] __do_sys_fsconfig fs/fsopen.c:473 [inline] __se_sys_fsconfig+0xb6e/0xf80 fs/fsopen.c:345 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [Analysis] There are two paths (dbUnmount and jfs_ioc_trim) that generate race condition when accessing bmap, which leads to the occurrence of uaf. Use the lock s_umount to synchronize them, in order to avoid uaf caused by race condition. | ||||
| CVE-2024-49884 | 1 Linux | 1 Linux Kernel | 2024-11-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix slab-use-after-free in ext4_split_extent_at() We hit the following use-after-free: ================================================================== BUG: KASAN: slab-use-after-free in ext4_split_extent_at+0xba8/0xcc0 Read of size 2 at addr ffff88810548ed08 by task kworker/u20:0/40 CPU: 0 PID: 40 Comm: kworker/u20:0 Not tainted 6.9.0-dirty #724 Call Trace: <TASK> kasan_report+0x93/0xc0 ext4_split_extent_at+0xba8/0xcc0 ext4_split_extent.isra.0+0x18f/0x500 ext4_split_convert_extents+0x275/0x750 ext4_ext_handle_unwritten_extents+0x73e/0x1580 ext4_ext_map_blocks+0xe20/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] Allocated by task 40: __kmalloc_noprof+0x1ac/0x480 ext4_find_extent+0xf3b/0x1e70 ext4_ext_map_blocks+0x188/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] Freed by task 40: kfree+0xf1/0x2b0 ext4_find_extent+0xa71/0x1e70 ext4_ext_insert_extent+0xa22/0x3260 ext4_split_extent_at+0x3ef/0xcc0 ext4_split_extent.isra.0+0x18f/0x500 ext4_split_convert_extents+0x275/0x750 ext4_ext_handle_unwritten_extents+0x73e/0x1580 ext4_ext_map_blocks+0xe20/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] ================================================================== The flow of issue triggering is as follows: ext4_split_extent_at path = *ppath ext4_ext_insert_extent(ppath) ext4_ext_create_new_leaf(ppath) ext4_find_extent(orig_path) path = *orig_path read_extent_tree_block // return -ENOMEM or -EIO ext4_free_ext_path(path) kfree(path) *orig_path = NULL a. If err is -ENOMEM: ext4_ext_dirty(path + path->p_depth) // path use-after-free !!! b. If err is -EIO and we have EXT_DEBUG defined: ext4_ext_show_leaf(path) eh = path[depth].p_hdr // path also use-after-free !!! So when trying to zeroout or fix the extent length, call ext4_find_extent() to update the path. In addition we use *ppath directly as an ext4_ext_show_leaf() input to avoid possible use-after-free when EXT_DEBUG is defined, and to avoid unnecessary path updates. | ||||
| CVE-2024-49883 | 1 Linux | 1 Linux Kernel | 2024-11-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: aovid use-after-free in ext4_ext_insert_extent() As Ojaswin mentioned in Link, in ext4_ext_insert_extent(), if the path is reallocated in ext4_ext_create_new_leaf(), we'll use the stale path and cause UAF. Below is a sample trace with dummy values: ext4_ext_insert_extent path = *ppath = 2000 ext4_ext_create_new_leaf(ppath) ext4_find_extent(ppath) path = *ppath = 2000 if (depth > path[0].p_maxdepth) kfree(path = 2000); *ppath = path = NULL; path = kcalloc() = 3000 *ppath = 3000; return path; /* here path is still 2000, UAF! */ eh = path[depth].p_hdr ================================================================== BUG: KASAN: slab-use-after-free in ext4_ext_insert_extent+0x26d4/0x3330 Read of size 8 at addr ffff8881027bf7d0 by task kworker/u36:1/179 CPU: 3 UID: 0 PID: 179 Comm: kworker/u6:1 Not tainted 6.11.0-rc2-dirty #866 Call Trace: <TASK> ext4_ext_insert_extent+0x26d4/0x3330 ext4_ext_map_blocks+0xe22/0x2d40 ext4_map_blocks+0x71e/0x1700 ext4_do_writepages+0x1290/0x2800 [...] Allocated by task 179: ext4_find_extent+0x81c/0x1f70 ext4_ext_map_blocks+0x146/0x2d40 ext4_map_blocks+0x71e/0x1700 ext4_do_writepages+0x1290/0x2800 ext4_writepages+0x26d/0x4e0 do_writepages+0x175/0x700 [...] Freed by task 179: kfree+0xcb/0x240 ext4_find_extent+0x7c0/0x1f70 ext4_ext_insert_extent+0xa26/0x3330 ext4_ext_map_blocks+0xe22/0x2d40 ext4_map_blocks+0x71e/0x1700 ext4_do_writepages+0x1290/0x2800 ext4_writepages+0x26d/0x4e0 do_writepages+0x175/0x700 [...] ================================================================== So use *ppath to update the path to avoid the above problem. | ||||
| CVE-2024-49867 | 1 Linux | 1 Linux Kernel | 2024-11-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: wait for fixup workers before stopping cleaner kthread during umount During unmount, at close_ctree(), we have the following steps in this order: 1) Park the cleaner kthread - this doesn't destroy the kthread, it basically halts its execution (wake ups against it work but do nothing); 2) We stop the cleaner kthread - this results in freeing the respective struct task_struct; 3) We call btrfs_stop_all_workers() which waits for any jobs running in all the work queues and then free the work queues. Syzbot reported a case where a fixup worker resulted in a crash when doing a delayed iput on its inode while attempting to wake up the cleaner at btrfs_add_delayed_iput(), because the task_struct of the cleaner kthread was already freed. This can happen during unmount because we don't wait for any fixup workers still running before we call kthread_stop() against the cleaner kthread, which stops and free all its resources. Fix this by waiting for any fixup workers at close_ctree() before we call kthread_stop() against the cleaner and run pending delayed iputs. The stack traces reported by syzbot were the following: BUG: KASAN: slab-use-after-free in __lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065 Read of size 8 at addr ffff8880272a8a18 by task kworker/u8:3/52 CPU: 1 UID: 0 PID: 52 Comm: kworker/u8:3 Not tainted 6.12.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: btrfs-fixup btrfs_work_helper Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 __lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162 class_raw_spinlock_irqsave_constructor include/linux/spinlock.h:551 [inline] try_to_wake_up+0xb0/0x1480 kernel/sched/core.c:4154 btrfs_writepage_fixup_worker+0xc16/0xdf0 fs/btrfs/inode.c:2842 btrfs_work_helper+0x390/0xc50 fs/btrfs/async-thread.c:314 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 2: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:319 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:345 kasan_slab_alloc include/linux/kasan.h:247 [inline] slab_post_alloc_hook mm/slub.c:4086 [inline] slab_alloc_node mm/slub.c:4135 [inline] kmem_cache_alloc_node_noprof+0x16b/0x320 mm/slub.c:4187 alloc_task_struct_node kernel/fork.c:180 [inline] dup_task_struct+0x57/0x8c0 kernel/fork.c:1107 copy_process+0x5d1/0x3d50 kernel/fork.c:2206 kernel_clone+0x223/0x880 kernel/fork.c:2787 kernel_thread+0x1bc/0x240 kernel/fork.c:2849 create_kthread kernel/kthread.c:412 [inline] kthreadd+0x60d/0x810 kernel/kthread.c:765 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Freed by task 61: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:230 [inline] slab_free_h ---truncated--- | ||||
| CVE-2024-47747 | 1 Linux | 1 Linux Kernel | 2024-11-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: seeq: Fix use after free vulnerability in ether3 Driver Due to Race Condition In the ether3_probe function, a timer is initialized with a callback function ether3_ledoff, bound to &prev(dev)->timer. Once the timer is started, there is a risk of a race condition if the module or device is removed, triggering the ether3_remove function to perform cleanup. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | ether3_ledoff ether3_remove | free_netdev(dev); | put_devic | kfree(dev); | | ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2); | // use dev Fix it by ensuring that the timer is canceled before proceeding with the cleanup in ether3_remove. | ||||
| CVE-2024-47706 | 1 Linux | 1 Linux Kernel | 2024-11-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block, bfq: fix possible UAF for bfqq->bic with merge chain 1) initial state, three tasks: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | Λ | Λ | Λ | | | | | | V | V | V | bfqq1 bfqq2 bfqq3 process ref: 1 1 1 2) bfqq1 merged to bfqq2: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | | | Λ \--------------\| | | V V | bfqq1--------->bfqq2 bfqq3 process ref: 0 2 1 3) bfqq2 merged to bfqq3: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) here -> Λ | | \--------------\ \-------------\| V V bfqq1--------->bfqq2---------->bfqq3 process ref: 0 1 3 In this case, IO from Process 1 will get bfqq2 from BIC1 first, and then get bfqq3 through merge chain, and finially handle IO by bfqq3. Howerver, current code will think bfqq2 is owned by BIC1, like initial state, and set bfqq2->bic to BIC1. bfq_insert_request -> by Process 1 bfqq = bfq_init_rq(rq) bfqq = bfq_get_bfqq_handle_split bfqq = bic_to_bfqq -> get bfqq2 from BIC1 bfqq->ref++ rq->elv.priv[0] = bic rq->elv.priv[1] = bfqq if (bfqq_process_refs(bfqq) == 1) bfqq->bic = bic -> record BIC1 to bfqq2 __bfq_insert_request new_bfqq = bfq_setup_cooperator -> get bfqq3 from bfqq2->new_bfqq bfqq_request_freed(bfqq) new_bfqq->ref++ rq->elv.priv[1] = new_bfqq -> handle IO by bfqq3 Fix the problem by checking bfqq is from merge chain fist. And this might fix a following problem reported by our syzkaller(unreproducible): ================================================================== BUG: KASAN: slab-use-after-free in bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] BUG: KASAN: slab-use-after-free in bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] BUG: KASAN: slab-use-after-free in bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 Write of size 1 at addr ffff888123839eb8 by task kworker/0:1H/18595 CPU: 0 PID: 18595 Comm: kworker/0:1H Tainted: G L 6.6.0-07439-gba2303cacfda #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: kblockd blk_mq_requeue_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0x10d/0x610 mm/kasan/report.c:475 kasan_report+0x8e/0xc0 mm/kasan/report.c:588 bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 bfq_get_bfqq_handle_split+0x169/0x5d0 block/bfq-iosched.c:6757 bfq_init_rq block/bfq-iosched.c:6876 [inline] bfq_insert_request block/bfq-iosched.c:6254 [inline] bfq_insert_requests+0x1112/0x5cf0 block/bfq-iosched.c:6304 blk_mq_insert_request+0x290/0x8d0 block/blk-mq.c:2593 blk_mq_requeue_work+0x6bc/0xa70 block/blk-mq.c:1502 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 </TASK> Allocated by task 20776: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x87/0x90 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3458 [inline] kmem_cache_alloc_node+0x1a4/0x6f0 mm/slub.c:3503 ioc_create_icq block/blk-ioc.c:370 [inline] ---truncated--- | ||||
| CVE-2024-47701 | 1 Linux | 1 Linux Kernel | 2024-11-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid OOB when system.data xattr changes underneath the filesystem When looking up for an entry in an inlined directory, if e_value_offs is changed underneath the filesystem by some change in the block device, it will lead to an out-of-bounds access that KASAN detects as an UAF. EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: none. loop0: detected capacity change from 2048 to 2047 ================================================================== BUG: KASAN: use-after-free in ext4_search_dir+0xf2/0x1c0 fs/ext4/namei.c:1500 Read of size 1 at addr ffff88803e91130f by task syz-executor269/5103 CPU: 0 UID: 0 PID: 5103 Comm: syz-executor269 Not tainted 6.11.0-rc4-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 ext4_search_dir+0xf2/0x1c0 fs/ext4/namei.c:1500 ext4_find_inline_entry+0x4be/0x5e0 fs/ext4/inline.c:1697 __ext4_find_entry+0x2b4/0x1b30 fs/ext4/namei.c:1573 ext4_lookup_entry fs/ext4/namei.c:1727 [inline] ext4_lookup+0x15f/0x750 fs/ext4/namei.c:1795 lookup_one_qstr_excl+0x11f/0x260 fs/namei.c:1633 filename_create+0x297/0x540 fs/namei.c:3980 do_symlinkat+0xf9/0x3a0 fs/namei.c:4587 __do_sys_symlinkat fs/namei.c:4610 [inline] __se_sys_symlinkat fs/namei.c:4607 [inline] __x64_sys_symlinkat+0x95/0xb0 fs/namei.c:4607 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f3e73ced469 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 21 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff4d40c258 EFLAGS: 00000246 ORIG_RAX: 000000000000010a RAX: ffffffffffffffda RBX: 0032656c69662f2e RCX: 00007f3e73ced469 RDX: 0000000020000200 RSI: 00000000ffffff9c RDI: 00000000200001c0 RBP: 0000000000000000 R08: 00007fff4d40c290 R09: 00007fff4d40c290 R10: 0023706f6f6c2f76 R11: 0000000000000246 R12: 00007fff4d40c27c R13: 0000000000000003 R14: 431bde82d7b634db R15: 00007fff4d40c2b0 </TASK> Calling ext4_xattr_ibody_find right after reading the inode with ext4_get_inode_loc will lead to a check of the validity of the xattrs, avoiding this problem. | ||||
| CVE-2024-47696 | 1 Linux | 1 Linux Kernel | 2024-11-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/iwcm: Fix WARNING:at_kernel/workqueue.c:#check_flush_dependency In the commit aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to destroying CM IDs"), the function flush_workqueue is invoked to flush the work queue iwcm_wq. But at that time, the work queue iwcm_wq was created via the function alloc_ordered_workqueue without the flag WQ_MEM_RECLAIM. Because the current process is trying to flush the whole iwcm_wq, if iwcm_wq doesn't have the flag WQ_MEM_RECLAIM, verify that the current process is not reclaiming memory or running on a workqueue which doesn't have the flag WQ_MEM_RECLAIM as that can break forward-progress guarantee leading to a deadlock. The call trace is as below: [ 125.350876][ T1430] Call Trace: [ 125.356281][ T1430] <TASK> [ 125.361285][ T1430] ? __warn (kernel/panic.c:693) [ 125.367640][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9)) [ 125.375689][ T1430] ? report_bug (lib/bug.c:180 lib/bug.c:219) [ 125.382505][ T1430] ? handle_bug (arch/x86/kernel/traps.c:239) [ 125.388987][ T1430] ? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1)) [ 125.395831][ T1430] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621) [ 125.403125][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9)) [ 125.410984][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9)) [ 125.418764][ T1430] __flush_workqueue (kernel/workqueue.c:3970) [ 125.426021][ T1430] ? __pfx___might_resched (kernel/sched/core.c:10151) [ 125.433431][ T1430] ? destroy_cm_id (drivers/infiniband/core/iwcm.c:375) iw_cm [ 125.441209][ T1430] ? __pfx___flush_workqueue (kernel/workqueue.c:3910) [ 125.473900][ T1430] ? _raw_spin_lock_irqsave (arch/x86/include/asm/atomic.h:107 include/linux/atomic/atomic-arch-fallback.h:2170 include/linux/atomic/atomic-instrumented.h:1302 include/asm-generic/qspinlock.h:111 include/linux/spinlock.h:187 include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162) [ 125.473909][ T1430] ? __pfx__raw_spin_lock_irqsave (kernel/locking/spinlock.c:161) [ 125.482537][ T1430] _destroy_id (drivers/infiniband/core/cma.c:2044) rdma_cm [ 125.495072][ T1430] nvme_rdma_free_queue (drivers/nvme/host/rdma.c:656 drivers/nvme/host/rdma.c:650) nvme_rdma [ 125.505827][ T1430] nvme_rdma_reset_ctrl_work (drivers/nvme/host/rdma.c:2180) nvme_rdma [ 125.505831][ T1430] process_one_work (kernel/workqueue.c:3231) [ 125.515122][ T1430] worker_thread (kernel/workqueue.c:3306 kernel/workqueue.c:3393) [ 125.515127][ T1430] ? __pfx_worker_thread (kernel/workqueue.c:3339) [ 125.531837][ T1430] kthread (kernel/kthread.c:389) [ 125.539864][ T1430] ? __pfx_kthread (kernel/kthread.c:342) [ 125.550628][ T1430] ret_from_fork (arch/x86/kernel/process.c:147) [ 125.558840][ T1430] ? __pfx_kthread (kernel/kthread.c:342) [ 125.558844][ T1430] ret_from_fork_asm (arch/x86/entry/entry_64.S:257) [ 125.566487][ T1430] </TASK> [ 125.566488][ T1430] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2024-46849 | 1 Linux | 1 Linux Kernel | 2024-11-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: meson: axg-card: fix 'use-after-free' Buffer 'card->dai_link' is reallocated in 'meson_card_reallocate_links()', so move 'pad' pointer initialization after this function when memory is already reallocated. Kasan bug report: ================================================================== BUG: KASAN: slab-use-after-free in axg_card_add_link+0x76c/0x9bc Read of size 8 at addr ffff000000e8b260 by task modprobe/356 CPU: 0 PID: 356 Comm: modprobe Tainted: G O 6.9.12-sdkernel #1 Call trace: dump_backtrace+0x94/0xec show_stack+0x18/0x24 dump_stack_lvl+0x78/0x90 print_report+0xfc/0x5c0 kasan_report+0xb8/0xfc __asan_load8+0x9c/0xb8 axg_card_add_link+0x76c/0x9bc [snd_soc_meson_axg_sound_card] meson_card_probe+0x344/0x3b8 [snd_soc_meson_card_utils] platform_probe+0x8c/0xf4 really_probe+0x110/0x39c __driver_probe_device+0xb8/0x18c driver_probe_device+0x108/0x1d8 __driver_attach+0xd0/0x25c bus_for_each_dev+0xe0/0x154 driver_attach+0x34/0x44 bus_add_driver+0x134/0x294 driver_register+0xa8/0x1e8 __platform_driver_register+0x44/0x54 axg_card_pdrv_init+0x20/0x1000 [snd_soc_meson_axg_sound_card] do_one_initcall+0xdc/0x25c do_init_module+0x10c/0x334 load_module+0x24c4/0x26cc init_module_from_file+0xd4/0x128 __arm64_sys_finit_module+0x1f4/0x41c invoke_syscall+0x60/0x188 el0_svc_common.constprop.0+0x78/0x13c do_el0_svc+0x30/0x40 el0_svc+0x38/0x78 el0t_64_sync_handler+0x100/0x12c el0t_64_sync+0x190/0x194 | ||||
| CVE-2023-52913 | 1 Linux | 1 Linux Kernel | 2024-11-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix potential context UAFs gem_context_register() makes the context visible to userspace, and which point a separate thread can trigger the I915_GEM_CONTEXT_DESTROY ioctl. So we need to ensure that nothing uses the ctx ptr after this. And we need to ensure that adding the ctx to the xarray is the *last* thing that gem_context_register() does with the ctx pointer. [tursulin: Stable and fixes tags add/tidy.] (cherry picked from commit bed4b455cf5374e68879be56971c1da563bcd90c) | ||||
| CVE-2023-52530 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2024-11-08 | 5.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix potential key use-after-free When ieee80211_key_link() is called by ieee80211_gtk_rekey_add() but returns 0 due to KRACK protection (identical key reinstall), ieee80211_gtk_rekey_add() will still return a pointer into the key, in a potential use-after-free. This normally doesn't happen since it's only called by iwlwifi in case of WoWLAN rekey offload which has its own KRACK protection, but still better to fix, do that by returning an error code and converting that to success on the cfg80211 boundary only, leaving the error for bad callers of ieee80211_gtk_rekey_add(). | ||||
| CVE-2024-21860 | 1 Openatom | 1 Openharmony | 2024-11-08 | 8.2 High |
| in OpenHarmony v4.0.0 and prior versions allow an adjacent attacker arbitrary code execution in any apps through use after free. | ||||
| CVE-2024-33033 | 1 Qualcomm | 56 Fastconnect 6900, Fastconnect 6900 Firmware, Fastconnect 7800 and 53 more | 2024-11-08 | 6.7 Medium |
| Memory corruption while processing IOCTL calls to unmap the buffers. | ||||
| CVE-2024-33029 | 1 Qualcomm | 6 Qca6584au, Qca6584au Firmware, Qca6698aq and 3 more | 2024-11-08 | 6.7 Medium |
| Memory corruption while handling the PDR in driver for getting the remote heap maps. | ||||
| CVE-2024-50130 | 1 Linux | 1 Linux Kernel | 2024-11-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: bpf: must hold reference on net namespace BUG: KASAN: slab-use-after-free in __nf_unregister_net_hook+0x640/0x6b0 Read of size 8 at addr ffff8880106fe400 by task repro/72= bpf_nf_link_release+0xda/0x1e0 bpf_link_free+0x139/0x2d0 bpf_link_release+0x68/0x80 __fput+0x414/0xb60 Eric says: It seems that bpf was able to defer the __nf_unregister_net_hook() after exit()/close() time. Perhaps a netns reference is missing, because the netns has been dismantled/freed already. bpf_nf_link_attach() does : link->net = net; But I do not see a reference being taken on net. Add such a reference and release it after hook unreg. Note that I was unable to get syzbot reproducer to work, so I do not know if this resolves this splat. | ||||