| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The ai_cmd utility executes with full root permissions. It pipes socket inputs directly to popen(), paving the way for unauthenticated users to execute arbitrary root commands. |
| Authentication bypass by capture-replay vulnerability exists in Machine automation controller NX7 series all models V1.28 and earlier, Machine automation controller NX1 series all models V1.48 and earlier, and Machine automation controller NJ series all models V 1.48 and earlier, which may allow an adjacent attacker who can analyze the communication between the controller and the specific software used by OMRON internally to cause a denial-of-service (DoS) condition or execute a malicious program. |
| A race condition in the shared Extreme Platform
ONE IAM Gateway API-key authentication path could, under specific
high-concurrency traffic conditions, intermittently allow requests
authenticated with an Extreme Platform ONE /IAM-issued API key to receive
response data for another tenant. The issue was observed through ExtremeCloud
IQ/XIQ API endpoints and validated against both XIQ/XAPI and Extreme Platform ONE
/Common Services API paths. XIQ-native tokens and standard OAuth/Bearer JWT
authentication were not affected. |
| Microsoft UFO open-source framework for intelligent automation across devices and platforms. In 3.0.1-4-ge2626659, Microsoft UFO creates one shared UFOWebSocketHandler instance and reuses it for multiple authenticated WebSocket connections. The handler stores per-connection protocol objects in mutable instance fields. Each new WebSocket connection overwrites those fields. Later, message handlers send responses through the shared fields instead of through protocol objects bound to the originating connection. As a result, the most recently connected authenticated client can receive protocol responses that belong to another authenticated client. |
| Algernon is a small self-contained pure-Go web server. Prior to 1.17.7, when Algernon is invoked with a single file path instead of a directory, singleFileMode is set to true and debugMode is forcibly enabled. debugMode activates the PrettyError renderer, which on any Lua or template error response dumps the absolute path of the file that errored, complete byte contents of that file, and exception or parser error text. This response is served with HTTP 200 OK to whoever sent the request that triggered the error. Any client able to reach the server and able to provoke a runtime error in the served script obtains the full server-side source of that script and of any sibling Lua data file consulted during the request. This vulnerability is fixed in 1.17.7. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix krb5 mount with username option
Customer reported that some of their krb5 mounts were failing against
a single server as the client was trying to mount the shares with
wrong credentials. It turned out the client was reusing SMB session
from first mount to try mounting the other shares, even though a
different username= option had been specified to the other mounts.
By using username mount option along with sec=krb5 to search for
principals from keytab is supported by cifs.upcall(8) since
cifs-utils-4.8. So fix this by matching username mount option in
match_session() even with Kerberos.
For example, the second mount below should fail with -ENOKEY as there
is no 'foobar' principal in keytab (/etc/krb5.keytab). The client
ends up reusing SMB session from first mount to perform the second
one, which is wrong.
```
$ ktutil
ktutil: add_entry -password -p testuser -k 1 -e aes256-cts
Password for testuser@ZELDA.TEST:
ktutil: write_kt /etc/krb5.keytab
ktutil: quit
$ klist -ke
Keytab name: FILE:/etc/krb5.keytab
KVNO Principal
---- ----------------------------------------------------------------
1 testuser@ZELDA.TEST (aes256-cts-hmac-sha1-96)
$ mount.cifs //w22-root2/scratch /mnt/1 -o sec=krb5,username=testuser
$ mount.cifs //w22-root2/scratch /mnt/2 -o sec=krb5,username=foobar
$ mount -t cifs | grep -Po 'username=\K\w+'
testuser
testuser
``` |
| Excessive caching of authentication context in Neo4j Enterprise edition versions prior to 2026.01.4 leads to authenticated users inheriting the context of the first user who authenticated after restart. The issue is limited to certain non-default configurations of SSO (UserInfo endpoint).
We recommend upgrading to versions 2026.01.4 (or 5.26.22) where the issue is fixed. |
| A missing break statement in DSI OpenSession processing in Netatalk 1.5.0 through 4.4.2 causes a DSIOPT_ATTNQUANT switch case to fall through into DSIOPT_SERVQUANT, resulting in unintended session option handling that may allow a remote attacker to cause a minor service disruption via crafted DSI session options. |
| Active debug code exists in the ARN resolver of amazon-mq rabbitmq-aws before version 0.2.1. A debug ARN scheme (arn:aws-debug:file) accepted by the PUT /api/aws/arn/validate validation endpoint might allow remote authenticated users to perform arbitrary file reads on any file accessible to the RabbitMQ process.
To remediate this issue, customers should upgrade to version 0.2.1 of rabbitmq-aws. If RabbitMQ is configured to use TLS for connections, we also recommend rotating any associated private certificate keys. |
| Exposure of Data Element to Wrong Session vulnerability in Mia Technology Inc. MİA-MED allows Read Sensitive Strings Within an Executable.
This issue affects MİA-MED: before 1.0.7. |
| Software which sets SO_REUSEPORT_LB on a socket and then connects it to a host will not directly observe any problems. However, due to its membership in a load-balancing group, that socket will receive packets originating from any host. This breaks the contract of the connect(2) and implied connect via sendto(2), and may leave the application vulnerable to spoofing attacks.
The kernel failed to check the connection state of sockets when adding them to load-balancing groups. Furthermore, when looking up the destination socket for an incoming packet, the kernel will match a socket belonging to a load-balancing group even if it is connected, in violation of the contract that connected sockets are only supposed to receive packets originating from the connected host. |
| Development and test API endpoints are present that mirror production functionality. |
| OpenProject is an open-source, web-based project management software. Users of OpenProject versions prior to 16.6.5 and 17.0.1 have the ability to view and end their active sessions via Account Settings → Sessions. When deleting a session, it was not properly checked if the session belongs to the user. As the ID that is used to identify these session objects use incremental integers, users could iterate requests using `DELETE /my/sessions/:id` and thus unauthenticate other users. Users did not have access to any sensitive information (like browser identifier, IP addresses, etc) of other users that are stored in the session. The problem was patched in OpenProject versions 16.6.5 and 17.0.1. No known workarounds are available as this does not require any permissions or other that can temporarily be disabled. |
| Whisper Money is a personal finance application. Versions prior to 0.1.5 have an insecure direct object reference vulnerability. A user can update/create account balances in other users' bank accounts. Version 0.1.5 fixes the issue. |
| Lettermint Node.js SDK is the official Node.js SDK for Lettermint. In versions 1.5.0 and below, email properties (such as to, subject, html, text, and attachments) are not reset between sends when a single client instance is reused across multiple .send() calls. This can cause properties from a previous send to leak into a subsequent one, potentially delivering content or recipient addresses to unintended parties. Applications sending emails to different recipients in sequence — such as transactional flows like password resets or notifications — are affected. This issue has been fixed in version 1.5.1. |
| Unfurl through 2025.08 contains an improper input validation vulnerability in config parsing that enables Flask debug mode by default. The debug configuration value is read as a string and passed directly to app.run(), causing any non-empty string to evaluate truthy, allowing attackers to access the Werkzeug debugger and disclose sensitive information or achieve remote code execution. |
| Froxlor is open source server administration software. Prior to 2.3.4, a typo in Froxlor's input validation code (== instead of =) completely disables email format checking for all settings fields declared as email type. This allows an authenticated admin to store arbitrary strings in the panel.adminmail setting. This value is later concatenated into a shell command executed as root by a cron job, where the pipe character | is explicitly whitelisted. The result is full root-level Remote Code Execution. This vulnerability is fixed in 2.3.4. |
| The Sprig Plugin for Craft CMS is a reactive Twig component framework for Craft CMS. Starting in version 2.0.0 and prior to versions 2.15.2 and 3.15.2, admin users, and users with explicit permission to access the Sprig Playground, could potentially expose the security key, credentials, and other sensitive configuration data, in addition to running the `hashData()` signing function. This issue was mitigated in versions 3.15.2 and 2.15.2 by disabling access to the Sprig Playground entirely when `devMode` is disabled, by default. It is possible to override this behavior using a new `enablePlaygroundWhenDevModeDisabled` that defaults to `false`. |
| A vulnerability in Cisco RCM for Cisco StarOS Software could allow an unauthenticated, remote attacker to perform remote code execution on the application with root-level privileges in the context of the configured container.
This vulnerability exists because the debug mode is incorrectly enabled for specific services. An attacker could exploit this vulnerability by connecting to the device and navigating to the service with debug mode enabled. A successful exploit could allow the attacker to execute arbitrary commands as the root user.
The attacker would need to perform detailed reconnaissance to allow for unauthenticated access. The vulnerability can also be exploited by an authenticated attacker.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| Spotipy is a Python library for the Spotify Web API. As of commit 4f5759dbfb4506c7b6280572a4db1aabc1ac778d, using `pull_request_target` on `.github/workflows/integration_tests.yml` followed by the checking out the head.sha of a forked PR can be exploited by attackers, since untrusted code can be executed having full access to secrets (from the base repo). By exploiting the vulnerability is possible to exfiltrate `GITHUB_TOKEN` and secrets `SPOTIPY_CLIENT_ID`, `SPOTIPY_CLIENT_SECRET`. In particular `GITHUB_TOKEN` which can be used to completely overtake the repo since the token has content write privileges. The `pull_request_target` in GitHub Actions is a major security concern—especially in public repositories—because it executes untrusted code from a PR, but with the context of the base repository, including access to its secrets. Commit 9dfb7177b8d7bb98a5a6014f8e6436812a47576f reverted the change that caused the issue. |
