| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix drm_edid leak in amdgpu_dm
[WHAT]
When a sink is connected, aconnector->drm_edid was overwritten without
freeing the previous allocation, causing a memory leak on resume.
[HOW]
Free the previous drm_edid before updating it.
(cherry picked from commit 52024a94e7111366141cfc5d888b2ef011f879e5) |
| A flaw was found in Keycloak. An authenticated user with the view-users role could exploit a vulnerability in the UserResource component. By accessing a specific administrative endpoint, this user could improperly retrieve user attributes that were configured to be hidden. This unauthorized information disclosure could expose sensitive user data. |
| An issue was discovered in Vanetza V2X v26.02 allowing remote unauthorized attackers to cause a denial of service. The vulnerability exists in the GeoNetworking packet processing pipeline where OpenSSL exceptions from ECC point validation (invalid compressed point, point not on curve) are not properly caught by the Router::indicate() call chain. The openssl_wrapper.cpp check() function (line 19) throws openssl::Exception when OpenSSL operations fail. The parser's catch block in parse_secured() should catch these, but the exception escapes through subsequent processing stages (indicate_common, indicate_extended). This causes std::terminate, crashing the V2X receiver. |
| Memory safety bugs present in Thunderbird ESR 140.10.0 and Thunderbird 150.0.0. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 150.0.1, Firefox ESR 140.10.1, Firefox ESR 115.35.1, Thunderbird 150.0.1, and Thunderbird 140.10.1. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: tcm_loop: Drain commands in target_reset handler
tcm_loop_target_reset() violates the SCSI EH contract: it returns SUCCESS
without draining any in-flight commands. The SCSI EH documentation
(scsi_eh.rst) requires that when a reset handler returns SUCCESS the driver
has made lower layers "forget about timed out scmds" and is ready for new
commands. Every other SCSI LLD (virtio_scsi, mpt3sas, ipr, scsi_debug,
mpi3mr) enforces this by draining or completing outstanding commands before
returning SUCCESS.
Because tcm_loop_target_reset() doesn't drain, the SCSI EH reuses in-flight
scsi_cmnd structures for recovery commands (e.g. TUR) while the target core
still has async completion work queued for the old se_cmd. The memset in
queuecommand zeroes se_lun and lun_ref_active, causing
transport_lun_remove_cmd() to skip its percpu_ref_put(). The leaked LUN
reference prevents transport_clear_lun_ref() from completing, hanging
configfs LUN unlink forever in D-state:
INFO: task rm:264 blocked for more than 122 seconds.
rm D 0 264 258 0x00004000
Call Trace:
__schedule+0x3d0/0x8e0
schedule+0x36/0xf0
transport_clear_lun_ref+0x78/0x90 [target_core_mod]
core_tpg_remove_lun+0x28/0xb0 [target_core_mod]
target_fabric_port_unlink+0x50/0x60 [target_core_mod]
configfs_unlink+0x156/0x1f0 [configfs]
vfs_unlink+0x109/0x290
do_unlinkat+0x1d5/0x2d0
Fix this by making tcm_loop_target_reset() actually drain commands:
1. Issue TMR_LUN_RESET via tcm_loop_issue_tmr() to drain all commands that
the target core knows about (those not yet CMD_T_COMPLETE).
2. Use blk_mq_tagset_busy_iter() to iterate all started requests and
flush_work() on each se_cmd — this drains any deferred completion work
for commands that already had CMD_T_COMPLETE set before the TMR (which
the TMR skips via __target_check_io_state()). This is the same pattern
used by mpi3mr, scsi_debug, and libsas to drain outstanding commands
during reset. |
| In the Linux kernel, the following vulnerability has been resolved:
writeback: don't block sync for filesystems with no data integrity guarantees
Add a SB_I_NO_DATA_INTEGRITY superblock flag for filesystems that cannot
guarantee data persistence on sync (eg fuse). For superblocks with this
flag set, sync kicks off writeback of dirty inodes but does not wait
for the flusher threads to complete the writeback.
This replaces the per-inode AS_NO_DATA_INTEGRITY mapping flag added in
commit f9a49aa302a0 ("fs/writeback: skip AS_NO_DATA_INTEGRITY mappings
in wait_sb_inodes()"). The flag belongs at the superblock level because
data integrity is a filesystem-wide property, not a per-inode one.
Having this flag at the superblock level also allows us to skip having
to iterate every dirty inode in wait_sb_inodes() only to skip each inode
individually.
Prior to this commit, mappings with no data integrity guarantees skipped
waiting on writeback completion but still waited on the flusher threads
to finish initiating the writeback. Waiting on the flusher threads is
unnecessary. This commit kicks off writeback but does not wait on the
flusher threads. This change properly addresses a recent report [1] for
a suspend-to-RAM hang seen on fuse-overlayfs that was caused by waiting
on the flusher threads to finish:
Workqueue: pm_fs_sync pm_fs_sync_work_fn
Call Trace:
<TASK>
__schedule+0x457/0x1720
schedule+0x27/0xd0
wb_wait_for_completion+0x97/0xe0
sync_inodes_sb+0xf8/0x2e0
__iterate_supers+0xdc/0x160
ksys_sync+0x43/0xb0
pm_fs_sync_work_fn+0x17/0xa0
process_one_work+0x193/0x350
worker_thread+0x1a1/0x310
kthread+0xfc/0x240
ret_from_fork+0x243/0x280
ret_from_fork_asm+0x1a/0x30
</TASK>
On fuse this is problematic because there are paths that may cause the
flusher thread to block (eg if systemd freezes the user session cgroups
first, which freezes the fuse daemon, before invoking the kernel
suspend. The kernel suspend triggers ->write_node() which on fuse issues
a synchronous setattr request, which cannot be processed since the
daemon is frozen. Or if the daemon is buggy and cannot properly complete
writeback, initiating writeback on a dirty folio already under writeback
leads to writeback_get_folio() -> folio_prepare_writeback() ->
unconditional wait on writeback to finish, which will cause a hang).
This commit restores fuse to its prior behavior before tmp folios were
removed, where sync was essentially a no-op.
[1] https://lore.kernel.org/linux-fsdevel/CAJnrk1a-asuvfrbKXbEwwDSctvemF+6zfhdnuzO65Pt8HsFSRw@mail.gmail.com/T/#m632c4648e9cafc4239299887109ebd880ac6c5c1 |
| In the Linux kernel, the following vulnerability has been resolved:
atm: lec: fix use-after-free in sock_def_readable()
A race condition exists between lec_atm_close() setting priv->lecd
to NULL and concurrent access to priv->lecd in send_to_lecd(),
lec_handle_bridge(), and lec_atm_send(). When the socket is freed
via RCU while another thread is still using it, a use-after-free
occurs in sock_def_readable() when accessing the socket's wait queue.
The root cause is that lec_atm_close() clears priv->lecd without
any synchronization, while callers dereference priv->lecd without
any protection against concurrent teardown.
Fix this by converting priv->lecd to an RCU-protected pointer:
- Mark priv->lecd as __rcu in lec.h
- Use rcu_assign_pointer() in lec_atm_close() and lecd_attach()
for safe pointer assignment
- Use rcu_access_pointer() for NULL checks that do not dereference
the pointer in lec_start_xmit(), lec_push(), send_to_lecd() and
lecd_attach()
- Use rcu_read_lock/rcu_dereference/rcu_read_unlock in send_to_lecd(),
lec_handle_bridge() and lec_atm_send() to safely access lecd
- Use rcu_assign_pointer() followed by synchronize_rcu() in
lec_atm_close() to ensure all readers have completed before
proceeding. This is safe since lec_atm_close() is called from
vcc_release() which holds lock_sock(), a sleeping lock.
- Remove the manual sk_receive_queue drain from lec_atm_close()
since vcc_destroy_socket() already drains it after lec_atm_close()
returns.
v2: Switch from spinlock + sock_hold/put approach to RCU to properly
fix the race. The v1 spinlock approach had two issues pointed out
by Eric Dumazet:
1. priv->lecd was still accessed directly after releasing the
lock instead of using a local copy.
2. The spinlock did not prevent packets being queued after
lec_atm_close() drains sk_receive_queue since timer and
workqueue paths bypass netif_stop_queue().
Note: Syzbot patch testing was attempted but the test VM terminated
unexpectedly with "Connection to localhost closed by remote host",
likely due to a QEMU AHCI emulation issue unrelated to this fix.
Compile testing with "make W=1 net/atm/lec.o" passes cleanly. |
| Cross-site Scripting (XSS) allows an attacker to submit specially crafted data to the application which is returned unaltered in the resulting web page. |
| Giflib contains a double-free vulnerability that is the result of a shallow copy in GifMakeSavedImage and incorrect error handling. The conditions needed to trigger this vulnerability are difficult but may be possible. |
| Little CMS (lcms2) through 2.18 has an integer overflow in CubeSize in cmslut.c because the overflow check is performed after the multiplication. |
| A vulnerability in the web-based management interface of Cisco IoT Field Network Director could allow an authenticated, remote attacker with low privileges to retrieve files that they do not have permission to access.
This vulnerability is due to insufficient file access checks. An attacker could exploit this vulnerability by submitting crafted input in the web-based management interface. A successful exploit could allow the attacker to read files that they are not authorized to access. |
| A vulnerability in the web-based management interface of Cisco IoT Field Network Director could allow an authenticated, remote attacker with low privileges to access files and execute commands on a remote router.
This vulnerability is due to insufficient input validation of user-supplied data. An attacker could exploit this vulnerability by submitting crafted input in the web-based management interface. A successful exploit could allow the attacker to create, read, or delete files and execute limited commands in user EXEC mode on a remote router. |
| A vulnerability in the web-based management interface of Cisco IoT Field Network Director could allow an authenticated, remote attacker with low privileges to cause a DoS condition on a remotely managed router.
This vulnerability is due to improper error handling. An attacker could exploit this vulnerability by submitting crafted input to the web-based management interface. A successful exploit could allow the attacker to request unauthorized files from a remote router, causing the router to reload and resulting in a DoS condition. |
| A vulnerability in the web UI of Cisco Unity Connection Web Inbox could allow an unauthenticated, remote attacker to conduct SSRF attacks through an affected device.
This vulnerability is due to improper input validation for specific HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to send arbitrary network requests that are sourced from the affected device. |
| A vulnerability in the web-based management interface of Cisco Unity Connection could allow an authenticated, remote attacker to execute arbitrary code on an affected device.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted API request. A successful exploit could allow the attacker to execute arbitrary code as root, possibly resulting in the complete compromise of a targeted device. To exploit this vulnerability, the attacker must have valid user credentials on the affected device. |
| Versions of the package spin.js before 3.0.0 are vulnerable to Cross-site Scripting (XSS) via the spin() function that allows a creation of more than 1 alert for each 'target' element. An attacker would need to set an arbitrary key-value pair on Object.prototype through a crafted URL achieving a prototype pollution first, before being able to execute arbitrary JavaScript in the context of the user's browser. |
| A Cross-Site Scripting (XSS) vulnerability was found in PHPGurukal Hospital Management System v4.0 in the /hospital/hms/edit-profile.php page. This flaw allows an authenticated attacker (patient) to inject a malicious script payload into the User Name parameter, which is stored in the application and later rendered in the doctor s interface. |
| Authorization Bypass Through User-Controlled Key vulnerability in YITH YITH WooCommerce Wishlist allows Exploiting Incorrectly Configured Access Control Security Levels.
This issue affects YITH WooCommerce Wishlist: from n/a through 4.12.0. |
| Missing Authorization vulnerability in Magepeople inc. Bus Ticket Booking with Seat Reservation allows Exploiting Incorrectly Configured Access Control Security Levels.
This issue affects Bus Ticket Booking with Seat Reservation: from n/a before 5.6.8. |
| Dagster is an orchestration platform for the development, production, and observation of data assets. Prior to Dagster Core version 1.13.1 and prior to Dagster libraries version 0.29.1, the DuckDB, Snowflake, BigQuery, and DeltaLake I/O managers constructed SQL WHERE clauses by interpolating dynamic partition key values into queries without escaping. A user with the Add Dynamic Partitions permission could create a partition key that injects arbitrary SQL, which would execute against the target database backend under the I/O manager's credentials. Only deployments that use dynamic partitions are affected. Pipelines using static or time-window partitions are not impacted. This issue has been patched in Dagster Core version 1.13.1 and Dagster libraries version 0.29.1. |
