Search vulnerabilities

Results 425,898

CVE-2026-47684

Sync-in Server: SSRF protection bypass via IPv4-mapped IPv6 addresses in regExpPrivateIP

Sync-in Server is a secure, open-source platform for file storage, sharing, collaboration, and syncing. Prior to version 2.3.0, the private IP blocklist regex used in the URL download feature does not match IPv4-mapped IPv6 addresses (e.g. ::ffff:127.0.0.1), allowing SSRF protection to be bypassed on dual-stack systems. Version 2.3.0 fixes the issue.

CVSS 3.1 · 7.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-46034

vfio/cdx: Fix NULL pointer dereference in interrupt trigger path

In the Linux kernel, the following vulnerability has been resolved: vfio/cdx: Fix NULL pointer dereference in interrupt trigger path Add validation to ensure MSI is configured before accessing cdx_irqs array in vfio_cdx_set_msi_trigger(). Without this check, userspace can trigger a NULL pointer dereference by calling VFIO_DEVICE_SET_IRQS with VFIO_IRQ_SET_DATA_BOOL or VFIO_IRQ_SET_DATA_NONE flags before ever setting up interrupts via VFIO_IRQ_SET_DATA_EVENTFD. The vfio_cdx_msi_enable() function allocates the cdx_irqs array and sets config_msi to 1 only when called through the EVENTFD path. The trigger loop (for DATA_BOOL/DATA_NONE) assumed this had already been done, but there was no enforcement of this call ordering. This matches the protection used in the PCI VFIO driver where vfio_pci_set_msi_trigger() checks irq_is() before the trigger loop.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-46035

mm/page_alloc: return NULL early from alloc_frozen_pages_nolock() in NMI on UP

In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: return NULL early from alloc_frozen_pages_nolock() in NMI on UP On UP kernels (!CONFIG_SMP), spin_trylock() is a no-op that unconditionally succeeds even when the lock is already held. As a result, alloc_frozen_pages_nolock() called from NMI context can re-enter rmqueue() and acquire the zone lock that the interrupted context is already holding, corrupting the freelists. With CONFIG_DEBUG_SPINLOCK on UP, the following BUG is triggered with the slub_kunit test module: BUG: spinlock trylock failure on UP on CPU#0, kunit_try_catch/243 [...] Call Trace: <NMI> dump_stack_lvl+0x3f/0x60 do_raw_spin_trylock+0x41/0x50 _raw_spin_trylock+0x24/0x50 rmqueue.isra.0+0x2a9/0xa70 get_page_from_freelist+0xeb/0x450 alloc_frozen_pages_nolock_noprof+0x111/0x1e0 allocate_slab+0x42a/0x500 ___slab_alloc+0xa7/0x4c0 kmalloc_nolock_noprof+0x164/0x310 [...] </NMI> Fix this by returning NULL early when invoked from NMI on a UP kernel.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-6517

Mattermost Desktop App fails to restrict the allow list of domains which NTLM credentials are passed

Mattermost Desktop App versions <=6.1 5.5.13.0 fail to restrict the allow list of domains to which NTLM credentials were forwarded to in the Mattermost Desktop App which allows any user on a server without the image proxy enabled to intercept other users credentials via embedding an image that routes to an external web server. Mattermost Advisory ID: MMSA-2026-00651

CVSS 3.1 · 6.3 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2025-68295

smb: client: fix memory leak in cifs_construct_tcon()

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix memory leak in cifs_construct_tcon() When having a multiuser mount with domain= specified and using cifscreds, cifs_set_cifscreds() will end up setting @ctx->domainname, so it needs to be freed before leaving cifs_construct_tcon(). This fixes the following memory leak reported by kmemleak: mount.cifs //srv/share /mnt -o domain=ZELDA,multiuser,... su - testuser cifscreds add -d ZELDA -u testuser ... ls /mnt/1 ... umount /mnt echo scan > /sys/kernel/debug/kmemleak cat /sys/kernel/debug/kmemleak unreferenced object 0xffff8881203c3f08 (size 8): comm "ls", pid 5060, jiffies 4307222943 hex dump (first 8 bytes): 5a 45 4c 44 41 00 cc cc ZELDA... backtrace (crc d109a8cf): __kmalloc_node_track_caller_noprof+0x572/0x710 kstrdup+0x3a/0x70 cifs_sb_tlink+0x1209/0x1770 [cifs] cifs_get_fattr+0xe1/0xf50 [cifs] cifs_get_inode_info+0xb5/0x240 [cifs] cifs_revalidate_dentry_attr+0x2d1/0x470 [cifs] cifs_getattr+0x28e/0x450 [cifs] vfs_getattr_nosec+0x126/0x180 vfs_statx+0xf6/0x220 do_statx+0xab/0x110 __x64_sys_statx+0xd5/0x130 do_syscall_64+0xbb/0x380 entry_SYSCALL_64_after_hwframe+0x77/0x7f

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-11317

Rockwell Automation Logix 5370 and 5570 Controllers Vulnerable To Denial of Service Via CIP

A denial of service security issue exists in the affected product. The security issue stems from a fault occurring when a crafted CIP message is sent. Devices with less memory are more likely to be affected. This can result in a major nonrecoverable fault (MNRF). A program download is required to recover.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
CVE-2025-11694

Rockwell Automation CompactLogix 5370 Controllers – Multiple Vulnerabilities

A security issue exists within 1769 CompactLogix controllers due to the missing validation of sequence numbers and source IP addresses in the CIP protocol. This allows attacker to abuse the exposed Connection ID’s visible on the web interface to perform denial-of-service attacks, resulting in a minor fault.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
CVE-2026-9307

Rockwell Automation CompactLogix 5370 Controllers – Multiple Vulnerabilities

A sensitive information disclosure security issue exists within the affected CompactLogix controllers. The controller's web server exposes CIP Connection IDs on the diagnostics webpage, which are accessible to any unauthenticated user on the network. This information can be leveraged by an attacker to construct malicious packets, leading to Denial-of-Service.

CVSS 4.0 · 6.3 Medium EPSS < 1% KEV · Not listed
CVE-2024-45636

IBM Security QRadar EDR Software has a vulnerability where user credentials may be stored in plain text, potentially exposing sensitive information.

IBM Security QRadar EDR 3.12 through 3.12.24 stores user credentials in plain text which can be read by a local privileged user.

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed
Vendors
Ibm
CVE-2025-68312

usbnet: Prevents free active kevent

In the Linux kernel, the following vulnerability has been resolved: usbnet: Prevents free active kevent The root cause of this issue are: 1. When probing the usbnet device, executing usbnet_link_change(dev, 0, 0); put the kevent work in global workqueue. However, the kevent has not yet been scheduled when the usbnet device is unregistered. Therefore, executing free_netdev() results in the "free active object (kevent)" error reported here. 2. Another factor is that when calling usbnet_disconnect()->unregister_netdev(), if the usbnet device is up, ndo_stop() is executed to cancel the kevent. However, because the device is not up, ndo_stop() is not executed. The solution to this problem is to cancel the kevent before executing free_netdev().

CVSS 3.1 · 7.0 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-3341

IBM Langflow Desktop 1.0.0 - 1.9.2 DNS Rebinding Bypasses SSRF Protection Allowing Access to Internal Services

IBM Langflow Desktop 1.0.0 through 1.9.2 IBM Langflow is vulnerable to server-side request forgery (SSRF). This may allow an authenticated attacker to send unauthorized requests from the system, potentially leading to network enumeration or facilitating other attacks.

CVSS 3.1 · 5.4 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-4096

A vulnerability has been identified in IBM DevOps Plan that allows a Host Header Injection attack due to improper handling of the Host header in HTTP requests.

IBM DevOps Plan 3.0.0 through 3.0.6 is vulnerable to HTTP header injection, caused by improper validation of input by the HOST headers. This could allow an attacker to conduct various attacks against the vulnerable system, including cross-site scripting, cache poisoning or session hijacking

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2025-68229

scsi: target: tcm_loop: Fix segfault in tcm_loop_tpg_address_show()

In the Linux kernel, the following vulnerability has been resolved: scsi: target: tcm_loop: Fix segfault in tcm_loop_tpg_address_show() If the allocation of tl_hba->sh fails in tcm_loop_driver_probe() and we attempt to dereference it in tcm_loop_tpg_address_show() we will get a segfault, see below for an example. So, check tl_hba->sh before dereferencing it. Unable to allocate struct scsi_host BUG: kernel NULL pointer dereference, address: 0000000000000194 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 8356 Comm: tokio-runtime-w Not tainted 6.6.104.2-4.azl3 #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/28/2024 RIP: 0010:tcm_loop_tpg_address_show+0x2e/0x50 [tcm_loop] ... Call Trace: <TASK> configfs_read_iter+0x12d/0x1d0 [configfs] vfs_read+0x1b5/0x300 ksys_read+0x6f/0xf0 ...

CVSS 3.1 · 7.0 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-9507

Session fixation vulnerability in Enhancesoft's osTicket

A session fixation vulnerability has been identified in osTicket v1.18.2. This security flaw allows an attacker to hijack a victim’s account by keeping the initial session identifier (OSTSESSID) active after a successful login. The issue lies in the fact that the application does not invalidate the pre-authentication cookie or generate a new identifier for the authenticated context. As a result, if an attacker manages to set a known session identifier in the victim’s browser, they will be able to maintain unauthorised access to the account once the victim has authenticated.

CVSS 4.0 · 5.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-2381

WooCommerce Stripe Payment Gateway <= 10.7.0 - Missing Authorization to Unauthenticated Order Status Manipulation via 'order' Parameter

The WooCommerce Stripe Payment Gateway plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the `ajax_pay_for_order()` function in all versions up to, and including, 10.7.0 This is due to a missing order ownership or order_key verification when processing payment for an order via the `wc_stripe_pay_for_order` WC-AJAX endpoint. The function only validates a nonce (which is publicly available on any WooCommerce page where Express Checkout is enabled), but does not verify that the requesting user owns the target order and is allowed to modify it. This makes it possible for unauthenticated attackers to force any pending order into a failed status by providing a fake payment method, causing a payment exception that updates the order status to "failed" via sequential order ID enumeration.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
CVE-2026-42850

Kitty has a shell command injection

Kitty is a cross-platform GPU based terminal. In versions prior to 0.47.0, it is possible to inject commands within the subshell through kitty error. A special escape code will make kitty return an error, this error is not escaped and will be correctly echoed back to the terminal with CRLF, as such it will be run by the shell in use. To exploit this bug, the victim must use a netcat or a similar program to connect to the attacker, or else listening for someone to connect. Once this condition is set, an attacker could pwn the computer of the victim using a special kitty's escape code that will run a command in the shell in use. Version 04.7.0 fixes the issue.

CVSS 4.0 · 7.4 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-42851

@kitty-edit DCS + --color=geninclude vulnerable to Unauthenticated in-process RCE

Kitty is a cross-platform GPU based terminal. In versions prior to 0.47.0, a program able to write bytes to a kitty terminal — a remote SSH peer, a downloaded file viewed with `cat`, a log line, an email body rendered in `less`, an issue body in a TUI, etc. — can cause kitty to execute attacker-supplied Python inside the running kitty process, with the user's full privileges. There is no approval prompt, no remote-control permission requirement, no shell-integration interaction, no clipboard touch, and no editor interaction. Version 0.47.0 fixes the issue.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-5149

RTMKit <= 2.0.7 - Authenticated (Contributor+) Missing Authorization to Arbitrary Form Submission Access via 'entries_id' Parameter

The RTMKit plugin for WordPress is vulnerable to Incorrect Authorization in all versions up to, and including, 2.0.7 This is due to the get_submission_content AJAX endpoint lacking a capability check to verify that a user has permission to access the requested form submission data. This makes it possible for authenticated attackers, with Contributor-level access and above, to view arbitrary form submissions from other users by iterating the entries_id parameter.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Products
CVE-2026-54055

Kitty has an Arbitrary File Write via Symlink Race Condition in File Transmission Protocol

Kitty is a cross-platform GPU based terminal. In versions prior to 0.47.2, a local privilege escalation vulnerability exists in kitty's file transmission protocol where a child process running in the terminal can write to arbitrary files on the filesystem by exploiting a TOCTOU (Time-of-Check-Time-of-Use) race condition between symlink validation and file creation. The `os.open()` call used to create files does not use `O_NOFOLLOW`, allowing an attacker to create a symlink between the initial stat check and the actual file open, causing the write to follow the symlink to an arbitrary destination. Version 0.47.2 fixes the issue.

CVSS 3.1 · 5 Medium EPSS < 1% KEV · Not listed
Vendors
Products