| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc3-topology: Prevent double freeing of ipc_control_data via load_bytes
We have sanity checks for byte controls and if any of the fail the locally
allocated scontrol->ipc_control_data is freed up, but not set to NULL.
On a rollback path of the error the higher level code will also try to free
the scontrol->ipc_control_data which will eventually going to lead to
memory corruption as double freeing memory is not a good thing. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: n_gsm: fix deadlock and link starvation in outgoing data path
The current implementation queues up new control and user packets as needed
and processes this queue down to the ldisc in the same code path.
That means that the upper and the lower layer are hard coupled in the code.
Due to this deadlocks can happen as seen below while transmitting data,
especially during ldisc congestion. Furthermore, the data channels starve
the control channel on high transmission load on the ldisc.
Introduce an additional control channel data queue to prevent timeouts and
link hangups during ldisc congestion. This is being processed before the
user channel data queue in gsm_data_kick(), i.e. with the highest priority.
Put the queue to ldisc data path into a workqueue and trigger it whenever
new data has been put into the transmission queue. Change
gsm_dlci_data_sweep() accordingly to fill up the transmission queue until
TX_THRESH_HI. This solves the locking issue, keeps latency low and provides
good performance on high data load.
Note that now all packets from a DLCI are removed from the internal queue
if the associated DLCI was closed. This ensures that no data is sent by the
introduced write task to an already closed DLCI.
BUG: spinlock recursion on CPU#0, test_v24_loop/124
lock: serial8250_ports+0x3a8/0x7500, .magic: dead4ead, .owner: test_v24_loop/124, .owner_cpu: 0
CPU: 0 PID: 124 Comm: test_v24_loop Tainted: G O 5.18.0-rc2 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x34/0x44
do_raw_spin_lock+0x76/0xa0
_raw_spin_lock_irqsave+0x72/0x80
uart_write_room+0x3b/0xc0
gsm_data_kick+0x14b/0x240 [n_gsm]
gsmld_write_wakeup+0x35/0x70 [n_gsm]
tty_wakeup+0x53/0x60
tty_port_default_wakeup+0x1b/0x30
serial8250_tx_chars+0x12f/0x220
serial8250_handle_irq.part.0+0xfe/0x150
serial8250_default_handle_irq+0x48/0x80
serial8250_interrupt+0x56/0xa0
__handle_irq_event_percpu+0x78/0x1f0
handle_irq_event+0x34/0x70
handle_fasteoi_irq+0x90/0x1e0
__common_interrupt+0x69/0x100
common_interrupt+0x48/0xc0
asm_common_interrupt+0x1e/0x40
RIP: 0010:__do_softirq+0x83/0x34e
Code: 2a 0a ff 0f b7 ed c7 44 24 10 0a 00 00 00 48 c7 c7 51 2a 64 82 e8 2d
e2 d5 ff 65 66 c7 05 83 af 1e 7e 00 00 fb b8 ff ff ff ff <49> c7 c2 40 61
80 82 0f bc c5 41 89 c4 41 83 c4 01 0f 84 e6 00 00
RSP: 0018:ffffc90000003f98 EFLAGS: 00000286
RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff82642a51 RDI: ffffffff825bb5e7
RBP: 0000000000000200 R08: 00000008de3271a8 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000030 R14: 0000000000000000 R15: 0000000000000000
? __do_softirq+0x73/0x34e
irq_exit_rcu+0xb5/0x100
common_interrupt+0xa4/0xc0
</IRQ>
<TASK>
asm_common_interrupt+0x1e/0x40
RIP: 0010:_raw_spin_unlock_irqrestore+0x2e/0x50
Code: 00 55 48 89 fd 48 83 c7 18 53 48 89 f3 48 8b 74 24 10 e8 85 28 36 ff
48 89 ef e8 cd 58 36 ff 80 e7 02 74 01 fb bf 01 00 00 00 <e8> 3d 97 33 ff
65 8b 05 96 23 2b 7e 85 c0 74 03 5b 5d c3 0f 1f 44
RSP: 0018:ffffc9000020fd08 EFLAGS: 00000202
RAX: 0000000000000000 RBX: 0000000000000246 RCX: 0000000000000000
RDX: 0000000000000004 RSI: ffffffff8257fd74 RDI: 0000000000000001
RBP: ffff8880057de3a0 R08: 00000008de233000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000100 R14: 0000000000000202 R15: ffff8880057df0b8
? _raw_spin_unlock_irqrestore+0x23/0x50
gsmtty_write+0x65/0x80 [n_gsm]
n_tty_write+0x33f/0x530
? swake_up_all+0xe0/0xe0
file_tty_write.constprop.0+0x1b1/0x320
? n_tty_flush_buffer+0xb0/0xb0
new_sync_write+0x10c/0x190
vfs_write+0x282/0x310
ksys_write+0x68/0xe0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f3e5e35c15c
Code: 8b 7c 24 08 89 c5 e8 c5 ff ff ff 89 ef 89 44 24
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
vfio: Split migration ops from main device ops
vfio core checks whether the driver sets some migration op (e.g.
set_state/get_state) and accordingly calls its op.
However, currently mlx5 driver sets the above ops without regards to its
migration caps.
This might lead to unexpected usage/Oops if user space may call to the
above ops even if the driver doesn't support migration. As for example,
the migration state_mutex is not initialized in that case.
The cleanest way to manage that seems to split the migration ops from
the main device ops, this will let the driver setting them separately
from the main ops when it's applicable.
As part of that, validate ops construction on registration and include a
check for VFIO_MIGRATION_STOP_COPY since the uAPI claims it must be set
in migration_flags.
HISI driver was changed as well to match this scheme.
This scheme may enable down the road to come with some extra group of
ops (e.g. DMA log) that can be set without regards to the other options
based on driver caps. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/perf: Optimize clearing the pending PMI and remove WARN_ON for PMI check in power_pmu_disable
commit 2c9ac51b850d ("powerpc/perf: Fix PMU callbacks to clear
pending PMI before resetting an overflown PMC") added a new
function "pmi_irq_pending" in hw_irq.h. This function is to check
if there is a PMI marked as pending in Paca (PACA_IRQ_PMI).This is
used in power_pmu_disable in a WARN_ON. The intention here is to
provide a warning if there is PMI pending, but no counter is found
overflown.
During some of the perf runs, below warning is hit:
WARNING: CPU: 36 PID: 0 at arch/powerpc/perf/core-book3s.c:1332 power_pmu_disable+0x25c/0x2c0
Modules linked in:
-----
NIP [c000000000141c3c] power_pmu_disable+0x25c/0x2c0
LR [c000000000141c8c] power_pmu_disable+0x2ac/0x2c0
Call Trace:
[c000000baffcfb90] [c000000000141c8c] power_pmu_disable+0x2ac/0x2c0 (unreliable)
[c000000baffcfc10] [c0000000003e2f8c] perf_pmu_disable+0x4c/0x60
[c000000baffcfc30] [c0000000003e3344] group_sched_out.part.124+0x44/0x100
[c000000baffcfc80] [c0000000003e353c] __perf_event_disable+0x13c/0x240
[c000000baffcfcd0] [c0000000003dd334] event_function+0xc4/0x140
[c000000baffcfd20] [c0000000003d855c] remote_function+0x7c/0xa0
[c000000baffcfd50] [c00000000026c394] flush_smp_call_function_queue+0xd4/0x300
[c000000baffcfde0] [c000000000065b24] smp_ipi_demux_relaxed+0xa4/0x100
[c000000baffcfe20] [c0000000000cb2b0] xive_muxed_ipi_action+0x20/0x40
[c000000baffcfe40] [c000000000207c3c] __handle_irq_event_percpu+0x8c/0x250
[c000000baffcfee0] [c000000000207e2c] handle_irq_event_percpu+0x2c/0xa0
[c000000baffcff10] [c000000000210a04] handle_percpu_irq+0x84/0xc0
[c000000baffcff40] [c000000000205f14] generic_handle_irq+0x54/0x80
[c000000baffcff60] [c000000000015740] __do_irq+0x90/0x1d0
[c000000baffcff90] [c000000000016990] __do_IRQ+0xc0/0x140
[c0000009732f3940] [c000000bafceaca8] 0xc000000bafceaca8
[c0000009732f39d0] [c000000000016b78] do_IRQ+0x168/0x1c0
[c0000009732f3a00] [c0000000000090c8] hardware_interrupt_common_virt+0x218/0x220
This means that there is no PMC overflown among the active events
in the PMU, but there is a PMU pending in Paca. The function
"any_pmc_overflown" checks the PMCs on active events in
cpuhw->n_events. Code snippet:
<<>>
if (any_pmc_overflown(cpuhw))
clear_pmi_irq_pending();
else
WARN_ON(pmi_irq_pending());
<<>>
Here the PMC overflown is not from active event. Example: When we do
perf record, default cycles and instructions will be running on PMC6
and PMC5 respectively. It could happen that overflowed event is currently
not active and pending PMI is for the inactive event. Debug logs from
trace_printk:
<<>>
any_pmc_overflown: idx is 5: pmc value is 0xd9a
power_pmu_disable: PMC1: 0x0, PMC2: 0x0, PMC3: 0x0, PMC4: 0x0, PMC5: 0xd9a, PMC6: 0x80002011
<<>>
Here active PMC (from idx) is PMC5 , but overflown PMC is PMC6(0x80002011).
When we handle PMI interrupt for such cases, if the PMC overflown is
from inactive event, it will be ignored. Reference commit:
commit bc09c219b2e6 ("powerpc/perf: Fix finding overflowed PMC in interrupt")
Patch addresses two changes:
1) Fix 1 : Removal of warning ( WARN_ON(pmi_irq_pending()); )
We were printing warning if no PMC is found overflown among active PMU
events, but PMI pending in PACA. But this could happen in cases where
PMC overflown is not in active PMC. An inactive event could have caused
the overflow. Hence the warning is not needed. To know pending PMI is
from an inactive event, we need to loop through all PMC's which will
cause more SPR reads via mfspr and increase in context switch. Also in
existing function: perf_event_interrupt, already we ignore PMI's
overflown when it is from an inactive PMC.
2) Fix 2: optimization in clearing pending PMI.
Currently we check for any active PMC overflown before clearing PMI
pending in Paca. This is causing additional SP
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
rpmsg: Fix possible refcount leak in rpmsg_register_device_override()
rpmsg_register_device_override need to call put_device to free vch when
driver_set_override fails.
Fix this by adding a put_device() to the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: imx_rproc: Fix refcount leak in imx_rproc_addr_init
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not needed anymore.
This function has two paths missing of_node_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: k3-r5: Fix refcount leak in k3_r5_cluster_of_init
Every iteration of for_each_available_child_of_node() decrements
the reference count of the previous node.
When breaking early from a for_each_available_child_of_node() loop,
we need to explicitly call of_node_put() on the child node.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8173-rt5650: Fix refcount leak in mt8173_rt5650_dev_probe
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Fix refcount leak in some error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8173: Fix refcount leak in mt8173_rt5650_rt5676_dev_probe
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Fix missing of_node_put() in error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mt6797-mt6351: Fix refcount leak in mt6797_mt6351_dev_probe
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: cros_ec_codec: Fix refcount leak in cros_ec_codec_platform_probe
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: fix assertion 'jh->b_frozen_data == NULL' failure when journal aborted
Following process will fail assertion 'jh->b_frozen_data == NULL' in
jbd2_journal_dirty_metadata():
jbd2_journal_commit_transaction
unlink(dir/a)
jh->b_transaction = trans1
jh->b_jlist = BJ_Metadata
journal->j_running_transaction = NULL
trans1->t_state = T_COMMIT
unlink(dir/b)
handle->h_trans = trans2
do_get_write_access
jh->b_modified = 0
jh->b_frozen_data = frozen_buffer
jh->b_next_transaction = trans2
jbd2_journal_dirty_metadata
is_handle_aborted
is_journal_aborted // return false
--> jbd2 abort <--
while (commit_transaction->t_buffers)
if (is_journal_aborted)
jbd2_journal_refile_buffer
__jbd2_journal_refile_buffer
WRITE_ONCE(jh->b_transaction,
jh->b_next_transaction)
WRITE_ONCE(jh->b_next_transaction, NULL)
__jbd2_journal_file_buffer(jh, BJ_Reserved)
J_ASSERT_JH(jh, jh->b_frozen_data == NULL) // assertion failure !
The reproducer (See detail in [Link]) reports:
------------[ cut here ]------------
kernel BUG at fs/jbd2/transaction.c:1629!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 2 PID: 584 Comm: unlink Tainted: G W
5.19.0-rc6-00115-g4a57a8400075-dirty #697
RIP: 0010:jbd2_journal_dirty_metadata+0x3c5/0x470
RSP: 0018:ffffc90000be7ce0 EFLAGS: 00010202
Call Trace:
<TASK>
__ext4_handle_dirty_metadata+0xa0/0x290
ext4_handle_dirty_dirblock+0x10c/0x1d0
ext4_delete_entry+0x104/0x200
__ext4_unlink+0x22b/0x360
ext4_unlink+0x275/0x390
vfs_unlink+0x20b/0x4c0
do_unlinkat+0x42f/0x4c0
__x64_sys_unlink+0x37/0x50
do_syscall_64+0x35/0x80
After journal aborting, __jbd2_journal_refile_buffer() is executed with
holding @jh->b_state_lock, we can fix it by moving 'is_handle_aborted()'
into the area protected by @jh->b_state_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix error unwind in rxe_create_qp()
In the function rxe_create_qp(), rxe_qp_from_init() is called to
initialize qp, internally things like the spin locks are not setup until
rxe_qp_init_req().
If an error occures before this point then the unwind will call
rxe_cleanup() and eventually to rxe_qp_do_cleanup()/rxe_cleanup_task()
which will oops when trying to access the uninitialized spinlock.
Move the spinlock initializations earlier before any failures. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: call rcu_barrier() in ksmbd_server_exit()
racy issue is triggered the bug by racing between closing a connection
and rmmod. In ksmbd, rcu_barrier() is not called at module unload time,
so nothing prevents ksmbd from getting unloaded while it still has RCU
callbacks pending. It leads to trigger unintended execution of kernel
code locally and use to defeat protections such as Kernel Lockdown |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: fix recursived rtnl_lock() during probe()
The deadlock appears in a stack trace like:
virtnet_probe()
rtnl_lock()
virtio_config_changed_work()
netdev_notify_peers()
rtnl_lock()
It happens if the VMM sends a VIRTIO_NET_S_ANNOUNCE request while the
virtio-net driver is still probing.
The config_work in probe() will get scheduled until virtnet_open() enables
the config change notification via virtio_config_driver_enable(). |
| In the Linux kernel, the following vulnerability has been resolved:
efivarfs: Fix memory leak of efivarfs_fs_info in fs_context error paths
When processing mount options, efivarfs allocates efivarfs_fs_info (sfi)
early in fs_context initialization. However, sfi is associated with the
superblock and typically freed when the superblock is destroyed. If the
fs_context is released (final put) before fill_super is called—such as
on error paths or during reconfiguration—the sfi structure would leak,
as ownership never transfers to the superblock.
Implement the .free callback in efivarfs_context_ops to ensure any
allocated sfi is properly freed if the fs_context is torn down before
fill_super, preventing this memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: axp20x_adc: Add missing sentinel to AXP717 ADC channel maps
The AXP717 ADC channel maps is missing a sentinel entry at the end. This
causes a KASAN warning.
Add the missing sentinel entry. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/srpt: Fix a use-after-free
Change the LIO port members inside struct srpt_port from regular members
into pointers. Allocate the LIO port data structures from inside
srpt_make_tport() and free these from inside srpt_make_tport(). Keep
struct srpt_device as long as either an RDMA port or a LIO target port is
associated with it. This patch decouples the lifetime of struct srpt_port
(controlled by the RDMA core) and struct srpt_port_id (controlled by LIO).
This patch fixes the following KASAN complaint:
BUG: KASAN: use-after-free in srpt_enable_tpg+0x31/0x70 [ib_srpt]
Read of size 8 at addr ffff888141cc34b8 by task check/5093
Call Trace:
<TASK>
show_stack+0x4e/0x53
dump_stack_lvl+0x51/0x66
print_address_description.constprop.0.cold+0xea/0x41e
print_report.cold+0x90/0x205
kasan_report+0xb9/0xf0
__asan_load8+0x69/0x90
srpt_enable_tpg+0x31/0x70 [ib_srpt]
target_fabric_tpg_base_enable_store+0xe2/0x140 [target_core_mod]
configfs_write_iter+0x18b/0x210
new_sync_write+0x1f2/0x2f0
vfs_write+0x3e3/0x540
ksys_write+0xbb/0x140
__x64_sys_write+0x42/0x50
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: ti: am65-cpsw-nuss: Fix skb size by accounting for skb_shared_info
While transitioning from netdev_alloc_ip_align() to build_skb(), memory
for the "skb_shared_info" member of an "skb" was not allocated. Fix this
by allocating "PAGE_SIZE" as the skb length, accounting for the packet
length, headroom and tailroom, thereby including the required memory space
for skb_shared_info. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: fbtft: core: set smem_len before fb_deferred_io_init call
The fbtft_framebuffer_alloc() calls fb_deferred_io_init() before
initializing info->fix.smem_len. It is set to zero by the
framebuffer_alloc() function. It will trigger a WARN_ON() at the
start of fb_deferred_io_init() and the function will not do anything. |
