| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: Fix device kref underflow in dma_chan_put()
dma_chan_get() takes chan->device->ref only on the slow path:
/* no kref on fast path */
if (chan->client_count) {
__module_get(owner);
chan->client_count++;
return 0;
}
if (!try_module_get(owner))
return -ENODEV;
if (!dma_device_get(chan->device)) { // calls kref_get_unless_zero()
dma_chan_put() drops the ref unconditionally, so every fast-path
get/put pair drops one extra device reference.
The bug fires when two conditions hold together: a non-private
provider has a persistent client holding chan->client_count > 0
and another client cycles dmaengine_get()/dmaengine_put().
When the kref hits zero, the subsequent dma_find_channel() returns
NULL even though the provider module is still loaded.
Fix this by dropping device->ref only on the last put, matching the
single slow-path get. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't start a ROC while scanning
The ROC work can be pending when a scan starts (which requires
ROC list to be empty, but that's possible), and then a new ROC
can be added to the list and the work will pick it up.
Avoid starting that ROC if a scan made it between things, as
otherwise we'll hit a warning later:
WARNING: net/mac80211/offchannel.c:404 at ieee80211_start_next_roc+0x256/0x2d0
Workqueue: events_unbound cfg80211_wiphy_work
Call Trace:
__ieee80211_scan_completed+0x4fd/0xe40 net/mac80211/scan.c:537
ieee80211_scan_work+0x472/0x1ff0 net/mac80211/scan.c:1193
cfg80211_wiphy_work+0x410/0x570 net/wireless/core.c:513 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dp: skip PUSH_IDLE when the link was never enabled
msm_dp_display_atomic_enable() returns early when link training fails,
leaving ->power_on false and the main link down.
msm_dp_display_atomic_disable() nevertheless writes DP_STATE_CTRL_PUSH_IDLE
and waits for an idle-pattern completion that cannot arrive, so every failed
enable is followed by "PUSH_IDLE pattern timedout".
Every other step of the teardown is already gated on that flag:
msm_dp_display_disable(), called from .atomic_post_disable(), returns early
on !power_on. The PUSH_IDLE write is the only one that is not, so the
controller's runtime-PM reference is then dropped without the link having
been taken down.
On glymur (Snapdragon X2 Elite) the consequence is not a warning. The SoC
does not survive it: TrustZone force-stops the SOCCP and ADSP remote
processors and the machine resets silently about 50 ms later, with no oops
and no panic. On an ASUS Zenbook A16 (UX3607OA), whose eDP panel does not
currently train, this reproduces without any compositor or GPU involvement:
# eDP enable has already failed with "Failed link training (rc=-104)"
echo 1 > /sys/class/graphics/fb0/blank
[535.645455] === marker ===
[535.694833] qcom_q6v5_pas d00000.remoteproc: fatal error received: \
sys_m_smsm.c:512:TZ force stop
[535.694875] remoteproc remoteproc0: crash detected in soccp: type fatal error
[535.728857] qcom_q6v5_pas 6800000.remoteproc: fatal error received: \
sys_m_smsm.c:783:err fatal notification received from TZ
<SoC reset>
Gate the PUSH_IDLE write on ->power_on so the disable path is consistent
with the rest of the teardown. With this applied the same sequence is
harmless and the machine stays up; without it, it resets every time.
The unconditional write dates back to the original DP driver
(c943b4948b58 ("drm/msm/dp: add displayPort driver support")), but the
surrounding code has been restructured several times since, so no Fixes:
tag is offered.
Note that the eDP link-training failure that exposes this on the A16 is a
separate problem in the glymur eDP PHY and is reported separately; this
change is about not damaging the machine when training fails, for whatever
reason.
Tested on ASUS Zenbook A16 (UX3607OA), Snapdragon X2 Elite Extreme, on
linux-next next-20260803 and next-20260807. The machine has since been
running next-20260807 with this patch as its daily driver.
Patchwork: https://patchwork.freedesktop.org/patch/745167/ |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: virt_wifi: don't transfer operstate before register
virt_wifi_newlink() calls netif_stacked_transfer_operstate() before
register_netdevice(). If the lower device is dormant, that queues the
new netdev on lweventlist while it is still uninitialized. If
registration fails after that, for example because of an invalid name
such as "bad/name", free_netdev() immediately frees the object. A
later linkwatch_fire_event() then use-after-frees the list entry.
Move the transfer to after netdev_upper_dev_link(), as macvlan and
ipvlan already do. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Use managed KMS polling to fix UAF on unbind
vc4_kms_load() calls drm_kms_helper_poll_init() but the driver provides
no matching drm_kms_helper_poll_fini(). The output poll work stays
scheduled after unbind and runs on the freed drm_device:
# modprobe vc4; rmmod vc4; sleep 10
BUG: KASAN: slab-use-after-free in delayed_work_timer_fn
BUG: KASAN: slab-use-after-free in drm_client_dev_hotplug [drm]
Workqueue: events output_poll_execute [drm_kms_helper]
Allocated by task 171: __devm_drm_dev_alloc
Freed by task 262 (rmmod): drm_dev_put / component_del
Use drmm_kms_helper_poll_init() so polling is finalized with the device,
as other drivers do. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/dax: check zero or empty entry before converting xarray entry
Calling dax_to_folio() with empty entry causes kernel panic below when
booting a VM with DAX enabled storage.
This patch checks empty entry before calling dax_to_folio() on
dax_associate_entry(), dax_disassociate_entry(), and dax_busy_page().
Commit 98c183a4fccf ("fs/dax: don't disassociate zero page entries") added
guards in the associate and disassociate paths, but the guards still come
after dax_to_folio(), and dax_busy_page() still has the same problem.
[ 0.737679] EXT4-fs (pmem0p1): mounted filesystem 79676804-7c8b-491a-b2a6-9bae3c72af70 ro with ordered data mode. Quota mode: disabled.
[ 0.737891] VFS: Mounted root (ext4 filesystem) readonly on device 259:1.
[ 0.739119] devtmpfs: mounted
[ 0.739476] Freeing unused kernel memory: 1920K
[ 0.740156] Run /sbin/init as init process
[ 0.740229] with arguments:
[ 0.740286] /sbin/init
[ 0.740321] with environment:
[ 0.740369] HOME=/
[ 0.740400] TERM=linux
[ 0.743162] Unable to handle kernel paging request at virtual address fffffdffbf000008
[ 0.743285] Mem abort info:
[ 0.743316] ESR = 0x0000000096000006
[ 0.743371] EC = 0x25: DABT (current EL), IL = 32 bits
[ 0.743444] SET = 0, FnV = 0
[ 0.743489] EA = 0, S1PTW = 0
[ 0.743545] FSC = 0x06: level 2 translation fault
[ 0.743610] Data abort info:
[ 0.743656] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000
[ 0.743720] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 0.743785] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 0.743848] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000b9d17000
[ 0.743931] [fffffdffbf000008] pgd=10000000bfa3d403, p4d=10000000bfa3d403, pud=1000000040bfe403, pmd=0000000000000000
[ 0.744070] Internal error: Oops: 0000000096000006 [#1] SMP
[ 0.748888] CPU: 0 UID: 0 PID: 1 Comm: init Not tainted 6.18.4 #1 NONE
[ 0.749421] pstate: 004000c5 (nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.749969] pc : dax_disassociate_entry.constprop.0+0x20/0x50
[ 0.750444] lr : dax_insert_entry+0xcc/0x408
[ 0.750802] sp : ffff80008000b9e0
[ 0.751083] x29: ffff80008000b9e0 x28: 0000000000000000 x27: 0000000000000000
[ 0.751682] x26: 0000000001963d01 x25: ffff0000004f7d90 x24: 0000000000000000
[ 0.752264] x23: 0000000000000000 x22: ffff80008000bcc8 x21: 0000000000000011
[ 0.752836] x20: ffff80008000ba90 x19: 0000000001963d01 x18: 0000000000000000
[ 0.753407] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.753970] x14: ffffbf3154b9ae70 x13: 0000000000000000 x12: ffffbf3154b9ae70
[ 0.754548] x11: ffffffffffffffff x10: 0000000000000000 x9 : 0000000000000000
[ 0.755122] x8 : 000000000000000d x7 : 000000000000001f x6 : 0000000000000000
[ 0.755707] x5 : 0000000000000000 x4 : 0000000000000000 x3 : fffffdffc0000000
[ 0.756287] x2 : 0000000000000008 x1 : 0000000040000000 x0 : fffffdffbf000000
[ 0.756871] Call trace:
[ 0.757107] dax_disassociate_entry.constprop.0+0x20/0x50 (P)
[ 0.757592] dax_iomap_pte_fault+0x4fc/0x808
[ 0.757951] dax_iomap_fault+0x28/0x30
[ 0.758258] ext4_dax_huge_fault+0x80/0x2dc
[ 0.758594] ext4_dax_fault+0x10/0x3c
[ 0.758892] __do_fault+0x38/0x12c
[ 0.759175] __handle_mm_fault+0x530/0xcf0
[ 0.759518] handle_mm_fault+0xe4/0x230
[ 0.759833] do_page_fault+0x17c/0x4dc
[ 0.760144] do_translation_fault+0x30/0x38
[ 0.760483] do_mem_abort+0x40/0x8c
[ 0.760771] el0_ia+0x4c/0x170
[ 0.761032] el0t_64_sync_handler+0xd8/0xdc
[ 0.761371] el0t_64_sync+0x168/0x16c
[ 0.761677] Code: f9453021 f2dfbfe3 cb813080 8b001860 (f9400401)
[ 0.762168] ---[ end trace 0000000000000000 ]---
[ 0.762550] note: init[1] exited with irqs disabled
[ 0.762631] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: preserve user SID across nested backing files
SELinux saves the user file SID in a backing-file security blob so it
remains available after mmap() replaces vma->vm_file with a backing file.
For nested backing files (overlayfs over overlayfs, or FUSE passthrough
backed by overlayfs), user_file may itself be a backing file. Its
fsec->sid is the SID of the mounter that opened it, rather than the user
that opened the top-level file. mprotect() then checks fd { use } against
the mounter SID. This can incorrectly deny access without a domain
transition, or check the wrong target SID after one.
Copy the saved user SID when user_file is a backing file. Keep using the
regular file SID for the first backing layer.
With two nested overlayfs mounts and SELinux enforcing,
mprotect(PROT_READ) returns EACCES with an fd { use } denial against the
mounter SID. With this change, mprotect() succeeds.
Tested on arm64 QEMU with a small BusyBox initramfs and a purpose-built
SELinux policy. The original test was also repeated with Fedora Cloud
Base 44 userspace and gave the same result. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: recheck intermediate backing files on mprotect()
mprotect() can be used to bypass the SELinux checks that mmap() performs
against the intermediate layers of a stacked filesystem.
mmap() checks every backing layer as the request descends through the
stack. mprotect() only has the lowest backing file in vma->vm_file, so it
rechecks the top-level user and the lowest mounter, but skips the mounters
of every layer in between. With two nested overlayfs mounts and a policy
denying mounter_t -> middle_file_t:file { execute }, a direct
mmap(PROT_EXEC) is denied:
avc: denied { execute } for pid=71 comm="nested_exec"
path="/payload" dev="overlay" ino=9
scontext=user_u:base_r:mounter_t
tcontext=user_u:object_r:middle_file_t tclass=file permissive=0
while mmap(PROT_NONE) followed by mprotect(PROT_EXEC) succeeds.
Preserve each intermediate path, mounter SID and file-description SID in
the backing-file security blob, copying the saved entries when another
backing layer is opened. Allocate the array only for nested backing files,
and release it and the path references in the backing_file_free hook.
During mprotect(), recheck fd { use } and the requested inode permissions
for every saved mounter, and include the intermediate layers in the execmod
checks. Policy for nested stacking may then need to grant intermediate
mounters what a direct mmap() already requires, and execmod on intermediate
labels for binaries using text relocations.
Tested on arm64 QEMU with a small BusyBox initramfs and a purpose-built
SELinux policy, on a mainline tree containing
commit f2381b546e7e ("fs: fix user path of nested backing files").
[PM: subject tweak] |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: hsq: Fix use-after-free in retry work
mmc_hsq_pump_requests() queues retry_work when request_atomic() returns
-EBUSY; today sdhci-sprd is the only consumer that implements
request_atomic(). The work is embedded in a devm-allocated mmc_hsq, but
is never cancelled during driver removal. Work still pending at unbind
can therefore run after the devm allocation has been released and
dereference hsq->mmc and hsq->mrq.
Use devm_work_autocancel() to cancel and drain retry_work before the devm
allocation is released. By the time devres cleanup begins,
mmc_remove_host() has already stopped the host, so no new requests can
arm the work.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sdio_uart: fix xmit_fifo leak when the port table is full
sdio_uart_add_port() allocates the transmit fifo before claiming a
slot in sdio_uart_table[]. When all UART_NR slots are taken, it
returns -EBUSY with the fifo still allocated, but the probe error
path only kfree()s the port, leaking the transmit fifo.
Free the fifo in the failure path of sdio_uart_add_port() itself so
the function retains nothing on error. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: spi: reset bytes_xfered before retrying CRC failures
mmc_spi_data_do() updates data->bytes_xfered after each block has been
transferred successfully. If a later block in the same data request
fails with a CRC error, data->bytes_xfered may therefore contain the
number of bytes completed before the failing block.
mmc_spi_request() has a private recovery path for such CRC failures. It
sends STOP_TRANSMISSION, clears data->error and jumps back to
crc_recover to issue the same command and data request again. However,
it does not clear data->bytes_xfered before the retry.
If the retry succeeds, the request is completed with the bytes from the
failed attempt still included in data->bytes_xfered. For a multi-block
request this can make the completed request report more bytes than were
transferred by the successful retry, and can even exceed the request size
when most blocks completed before the CRC error.
This is most likely to be observed on MMC-over-SPI systems where long
multi-block transfers occasionally hit a data CRC error but the
mmc_spi-internal retry succeeds. The data itself is retried, but the
completion accounting is not.
Clear data->bytes_xfered together with data->error before repeating the
request so the final completion reports only the bytes transferred by the
successful attempt. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: soc_button_array - check btns_desc->package.count
Check that btns_desc->package.count is not 0 before accessing
btns_desc->package.elements[0]. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libipw: reject TKIP frames without a full MIC
libipw_michael_mic_verify() assumes that an skb contains an eight-byte
Michael MIC. A short TKIP frame makes the unsigned payload length wrap,
causing michael_mic() to read past the skb.
Check that the MIC is present before verifying it, and use the existing
MICHAEL_MIC_LEN constant for all MIC lengths in the verifier. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gud: fix out-of-bounds write in gud_plane_atomic_check()
The plane property loop uses req->properties[num_properties + i] as write
index while simultaneously incrementing `num_properties` inside the loop.
At iteration i, num_properties has also incremented by i, so the write
is done at `initial_num_properties + 2*i`, skipping every other index and
advancing by 2 per iteration.
With just 2 connector and 32 plane properties the last write happens at
index 64, one slot past the end of the 64-slot (indices 0–63)
allocation. A USB device can trigger OOB by advertising the maximum
number of properties.
Fix by dropping the redundant `+ i`; num_properties is already the correct
running index, as gud_connector_fill_properties() fills the preceding
slots. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: RCU-free the scheduler-containing ring and VM objects
Both struct msm_ringbuffer and struct msm_gem_vm embed a struct
drm_gpu_scheduler. msm_ringbuffer_destroy() and the VM free callback
msm_gem_vm_free() call drm_sched_fini() on the embedded scheduler and then
free the containing object with plain kfree().
drm_sched_fence_get_timeline_name() returns fence->sched->name, and the
scheduler fence keeps a .release callback so it is not ops-detached on
signalling. A finished fence exported to userspace (the submit out-fence, or
a VM_BIND fence, via sync_file / drm_syncobj) keeps pointing at the embedded
scheduler after the ring/VM is freed, so a later get_timeline_name() --
reachable unprivileged through SYNC_IOC_FILE_INFO -- dereferences freed slab
memory (KASAN slab-use-after-free read).
Per the dma-fence lifetime contract the exporter must keep the data backing a
signalled fence alive for an RCU grace period. Free the scheduler-containing
objects with kfree_rcu() instead of kfree().
Patchwork: https://patchwork.freedesktop.org/patch/750234/ |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix rlist race and missing initialization
TCP_Server_Info.rlist is allocated via kzalloc which zeros both ->next
and ->prev to NULL instead of pointing to itself, making list_empty()
always return false and list_add() dereference a NULL ->prev pointer.
Also, cifs_signal_cifsd_for_reconnect() can be called concurrently
from multiple cifsd threads, allowing the same server's rlist node to
be added twice into the local list, corrupting it. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-after-free of iface in cifs_try_adding_channels()
cifs_try_adding_channels() iterates ses->iface_list with
list_for_each_entry_safe_from(), which captures the next entry
(niface) under iface_lock. The loop body then drops iface_lock for
the whole duration of cifs_ses_add_channel().
A concurrent interface refresh (SMB3_request_interfaces() ->
parse_server_interfaces()) marks all ifaces inactive and removes and
frees any that are not re-advertised via list_del() + kref_put(),
where release_iface() is a bare kfree(). Since niface typically has
no channel holding a reference, the list reference is its last and it
can be freed inside the unlocked window. On continue, the iterator
advance step then dereferences niface->iface_head.next, and the loop
body reads iface->rdma_capable/is_active, both on freed memory.
Fix this by never keeping an unreferenced list pointer across the
unlocked window. Each channel attempt now re-scans the list from the
head under iface_lock, takes a kref on the selected candidate, and
passes only that referenced candidate to cifs_ses_add_channel().
weight_fulfilled still tracks selection progress, so restarting the
scan preserves the original weighted distribution and the
weight_fulfilled-before-kref_put ordering on the failure path.
Add a per-pass attempts cap so a flapping interface refresh cannot
keep the inner loop spinning within a single tries increment. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix smbd_connection leak on cifs_get_tcp_session() error
When an RDMA connection is successfully established via
smbd_get_connection() but cifs_get_tcp_session() later fails (e.g.
kthread_create() returns an error), the error path frees tcp_ses
without first destroying the smbd_connection.
Fix this by calling smbd_destroy() in the out_err cleanup path before
kfree(tcp_ses). smbd_destroy() safely handles the case where
smbd_conn is NULL, so it can be called unconditionally. |
| Uncontrolled Resource Consumption vulnerability in the Elixir standard library's Version module allows an attacker who controls a version string to cause a denial of service through CPU and memory exhaustion.
The version parser converts numeric version components (major, minor, patch and numeric pre-release/build identifiers) to integers without bounding their length. A single large all-digit component therefore forces a super-linear, non-yielding base-10 to arbitrary-precision integer conversion (String.to_integer/1, i.e. :erlang.binary_to_integer/1) that pins a BEAM scheduler, and a larger component raises an uncaught SystemLimitError that crashes the calling process. A single moderately sized string (around one megabyte) is enough; no authentication is required.
This is reachable from the public entry points Version.parse/1, Version.parse!/1, Version.match?/3, Version.compare/2, and Version.parse_requirement/1, which applications routinely call on untrusted input such as HTTP parameters, dependency-manifest fields, and package metadata.
This vulnerability is associated with program files lib/version.ex and program routines 'Elixir.Version.Parser':parse_digits/2.
This issue affects elixir: from 0.9.3 before 1.20.1. |
| A vulnerability has been found in Tenda AC5 02.03.01.111_multi. Affected by this issue is some unknown functionality of the file /goform/setWifi of the component Wifi Handler. Such manipulation of the argument wifiPwd leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. |
