| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: consume only present negotiated TTLM maps
ieee80211_tid_to_link_map_size_ok() validates negotiated TTLM elements
against the number of link-map entries indicated by link_map_presence.
ieee80211_parse_neg_ttlm() must consume the same layout.
The parser advanced its cursor for every TID, including TIDs whose
presence bit is clear and therefore have no map bytes in the element.
A sparse map can then make a later present TID read past the validated
element.
The bad bytes land in neg_ttlm->{up,down}link[tid] but are gated by
valid_links before being applied to driver state, so a peer cannot
turn the read into a policy change. Under KUnit + KASAN with an
exact-sized element allocation the OOB read is reported as a
slab-out-of-bounds; whether the same trigger fires under the
production RX path depends on surrounding allocator state.
Advance the cursor only when the current TID has a map present. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: fix double free in rvu_rep_rsrc_init()
rvu_rep_rsrc_init() allocates queue memory before calling
otx2_init_hw_resources(). When hardware resource setup fails,
otx2_init_hw_resources() already unwinds the partially initialized
SQ, CQ, and aura state before returning an error. The representor
error path then calls otx2_free_hw_resources() again and can free
the same resources a second time.
Fix this by splitting the cleanup labels so that a failure from
otx2_init_hw_resources() only releases queue memory. Keep the
otx2_free_hw_resources() call for failures that happen after
hardware resource initialization completed successfully.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc3.
Runtime validation was not performed because reproducing this path
requires OcteonTX2 representor hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: CGX: add bounds check to cgx_speed_mbps index
cgx_speed_mbps has 13 elements but RESP_LINKSTAT_SPEED can yield values
0-15. If it returns a value >= 13, this causes an out-of-bounds array
access. Add a bounds check and default to speed 0 if the index is out of
range. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Prevent shader BO mappings from becoming writable
vc4_gem_object_mmap() rejects a writable mapping of a validated shader
BO, but leaves VM_MAYWRITE set. Userspace can map the BO read-only and
then turn it writable with mprotect().
Validated shader BOs must stay read-only: the validator checks the
instructions once and the GPU trusts them afterwards. A writable
mapping lets userspace rewrite the code after validation, bypassing the
validator.
Clear VM_MAYWRITE on the read-only path so the mapping cannot be
upgraded, as i915 already does for its read-only objects. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Fix NULL dereference in ffa_partition_info_get()
ffa_partition_info_get() passes uuid_str directly to uuid_parse()
without a NULL check. When a caller passes NULL, uuid_parse() ->
__uuid_parse() -> uuid_is_valid() dereferences the pointer, causing
a kernel panic:
| Unable to handle kernel NULL pointer dereference at virtual address
| 0000000000000040
| pc : uuid_parse+0x40/0xac
| lr : ffa_partition_info_get+0x1c/0x94 [arm_ffa]
Add a NULL guard before uuid_parse() so a NULL argument returns
-ENODEV instead of crashing. Callers are expected to always supply
a valid partition UUID, so NULL is not a supported input. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't propagate EXTENT_FLAG_LOGGING to split extent maps
When btrfs_drop_extent_map_range() splits an extent map, the new split
maps inherit the original map's flags through a local 'flags' variable.
Commit f86f7a75e2fb ("btrfs: use the flags of an extent map to identify
the compression type") changed the EXTENT_FLAG_LOGGING clearing to
operate on em->flags instead of that local 'flags' copy, so a split of
an extent map that is currently being logged wrongly inherits
EXTENT_FLAG_LOGGING.
The flag is then never cleared on the split, and when it is freed while
still on the inode's modified_extents list (for example by the extent
map shrinker) it trips the WARN_ON(!list_empty(&em->list)) in
btrfs_free_extent_map() and leads to a use-after-free.
Clear EXTENT_FLAG_LOGGING from the local 'flags' copy used for the
splits and only clear EXTENT_FLAG_PINNED from em->flags, restoring the
behaviour prior to f86f7a75e2fb. |
| In the Linux kernel, the following vulnerability has been resolved:
net: txgbe: fix heap overflow when reading module EEPROM
txgbe_read_eeprom_hostif() always copies round_up(length, 4) bytes
into the caller buffer, which ethtool allocates with exactly 'length'
bytes. A non-4-aligned length therefore causes an out-of-bounds write.
Copy only the remaining bytes on the final dword instead. |
| In the Linux kernel, the following vulnerability has been resolved:
smp: Make CSD lock acquisition atomic for debug mode
Commit b0473dcd4b1d ("smp: Improve smp_call_function_single()
CSD-lock diagnostics") changed smp_call_function_single() so that,
when CSD lock debugging is enabled, async !wait calls use the
destination CPU csd_data. That improves diagnostics, but it also removes
the single-writer property that made the old csd_lock() safe: multiple
CPUs can now prepare the same destination CPU CSD concurrently.
csd_lock() currently waits for CSD_FLAG_LOCK to clear and then sets the
bit with a non-atomic read-modify-write. Two senders can both see an
unlocked CSD, set the bit, overwrite the callback fields, and enqueue
the same llist node. Re-adding a node that is already the queue head can
make node->next point to itself, leaving the target CPU stuck walking
call_single_queue. Later synchronous work, such as a TLB shootdown, can
then remain queued and trigger soft-lockup warnings or panics.
Keep the single csd_lock() implementation, but when CSD lock debugging is
enabled, acquire CSD_FLAG_LOCK with try_cmpxchg_acquire(). This makes the
destination CPU CSD a real atomic lock in the only configuration where it
can be shared by multiple remote senders, while preserving the existing
non-debug fast path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Fit paired fragment job in the correct CCCB
For geometry jobs with a paired fragment job, at the moment, the
DRM scheduler's prepare_job() callback:
- checks for internal (driver) dependencies for the geometry job;
- calls into pvr_queue_get_paired_frag_job_dep() to check for external
dependencies for the fragment job (the two jobs are submitted together
but the common scheduler code doesn't know about it, so this needs to
be done at this point in time);
- calls into the prepare_job() callback again, but for the fragment job,
to check its internal dependencies as well, passing the fragment job's
drm_sched_job and the geometry job's drm_sched_entity / pvr_queue.
The problem with the last step is that pvr_queue_prepare_job() doesn't
always take the mismatched fragment job and geometry queue into account,
in particular when checking whether there is space for the fragment
command to be submitted, so the code ends up checking for space in the
geometry (i.e. wrong) CCCB.
The rest of the nested prepare_job() callback happens to work fine at
the moment as the other internal dependencies are not relevant for a
paired fragment job.
Move the initialisation of a paired fragment job's done fence and CCCB
fence to pvr_queue_get_paired_frag_job_dep(), inferring the correct
queue from the fragment job itself.
This fixes cases where prepare_job() wrongly assumed that there was
enough space for a paired fragment job in its own CCCB, unblocking
run_job(), which then returned early without writing the full sequence
of commands to the CCCB.
The above lead to kernel warnings such as the following and potentially
job timeouts (depending on waiters on the missing commands):
[ 552.421075] WARNING: drivers/gpu/drm/imagination/pvr_cccb.c:178 at pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr], CPU#2: kworker/u16:5/63
[ 552.421230] Modules linked in:
[ 552.421592] CPU: 2 UID: 0 PID: 63 Comm: kworker/u16:5 Tainted: G W 7.0.0-rc2-gc5d053e4dccb #39 PREEMPT
[ 552.421625] Tainted: [W]=WARN
[ 552.421637] Hardware name: Texas Instruments AM625 SK (DT)
[ 552.421655] Workqueue: powervr-sched drm_sched_run_job_work [gpu_sched]
[ 552.421744] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 552.421766] pc : pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr]
[ 552.421850] lr : pvr_queue_submit_job_to_cccb+0x57c/0xa74 [powervr]
[ 552.421923] sp : ffff800084c47650
[ 552.421936] x29: ffff800084c47740 x28: 0000000000000df8 x27: ffff800088a77000
[ 552.421979] x26: 0000000000000030 x25: ffff800084c47680 x24: 0000000000001000
[ 552.422017] x23: ffff800084c47820 x22: 1ffff00010988ecc x21: 0000000000000008
[ 552.422055] x20: 0000000000000208 x19: ffff000006ad5a88 x18: 0000000000000000
[ 552.422093] x17: 0000000020020000 x16: 0000000000020000 x15: 0000000000000000
[ 552.422130] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 552.422167] x11: 000000000000f2f2 x10: 00000000f3000000 x9 : 00000000f3f3f3f3
[ 552.422204] x8 : 00000000f2f2f200 x7 : ffff700010988ecc x6 : 0000000000000008
[ 552.422241] x5 : 0000000000000000 x4 : 1ffff0001114ee00 x3 : 0000000000000000
[ 552.422278] x2 : 0000000000000007 x1 : 0000000000000fff x0 : 000000000000002f
[ 552.422316] Call trace:
[ 552.422330] pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] (P)
[ 552.422411] pvr_queue_submit_job_to_cccb+0x57c/0xa74 [powervr]
[ 552.422486] pvr_queue_run_job+0x3a4/0x990 [powervr]
[ 552.422562] drm_sched_run_job_work+0x580/0xd48 [gpu_sched]
[ 552.422623] process_one_work+0x520/0x1288
[ 552.422657] worker_thread+0x3f0/0xb3c
[ 552.422679] kthread+0x334/0x3d8
[ 552.422706] ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: use kvzalloc to allocate struct dc
struct dc has grown large over time (most of it the two inlined
dc_scratch_space copies) and now sits close to the page allocator's 4 MiB
contiguous allocation limit. Its actual size is not fixed by the source
alone, it also depends on the compiler and the .config, so it can easily
cross 4 MiB, e.g. with a newer GCC or a config change.
dc_create() allocates it with kzalloc(). Once struct dc exceeds 4 MiB the
request is rounded up to order 11 (8 MiB), which is above MAX_PAGE_ORDER,
so the page allocator warns and returns NULL. dc_create() then fails, DM
init fails and amdgpu probe aborts with -EINVAL:
WARNING: mm/page_alloc.c:5197 at __alloc_frozen_pages_noprof+0x2f9/0x380
dc_create+0x38/0x660 [amdgpu]
amdgpu_dm_init+0x2d9/0x510 [amdgpu]
dm_hw_init+0x1b/0x90 [amdgpu]
amdgpu_device_init.cold+0x150d/0x1e13 [amdgpu]
amdgpu_driver_load_kms+0x19/0x80 [amdgpu]
amdgpu_pci_probe+0x1e2/0x4c0 [amdgpu]
dc_create() then returns NULL and DM init fails, which aborts the whole
GPU init and makes amdgpu probe fail with -EINVAL ("hw_init of IP block
<dm> failed -22"), leaving the display unusable. The subsequent
amdgpu_irq_put() warnings during teardown are just fallout of unwinding
a half-initialized device.
struct dc is a software-only bookkeeping structure that is never handed
to hardware DMA and is only ever kept as an opaque pointer, so it does
not require physically contiguous memory. Allocate it with kvzalloc()
(and free it with kvfree()) so that the allocator can fall back to
vmalloc() when a contiguous allocation of that size is not available,
which also avoids the MAX_PAGE_ORDER warning entirely.
v2:
- Rebase to amd-staging-drm-next.
(cherry picked from commit 991e0516a8072f2292681c6ae98a924ab0e32575) |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix address space mismatch in kexec command line lookup
When searching the loaded segments for the "kexec" command line marker,
the kexec_load(2) path (file_mode == 0) passes the user-space segment
buffer straight to strncmp() through a bogus (char __user *) cast. This
dereferences a user pointer in kernel context, which is wrong and is
flagged by sparse:
arch/loongarch/kernel/machine_kexec.c:84:51: sparse: incorrect type in
argument 2 (different address spaces) @@ expected char const * @@ got
char [noderef] __user *
Here copy the marker-sized prefix of each segment into a small on-stack
buffer with copy_from_user() before comparing, and skip segments that
fault. The subsequent copy_from_user() that stages the full command line
into the safe area is left unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_mid: Fix NULL function pointer dereference on DNV/ICX-D/SNR platforms
Commit b1b4efea05a5 ("serial: 8250_mid: Disable DMA for selected
platforms") replaced the dnv_board setup and exit callbacks with
PTR_IF(false, ...), which evaluates to NULL. However, the three call
sites in mid8250_probe() and mid8250_remove() unconditionally
dereference these function pointers without NULL checks, causing a NULL
pointer dereference (kernel oops) on any Denverton (DNV), Ice Lake Xeon
D (ICX-D/CDF), or Snowridge (SNR) platform.
Fix this by adding the missing NULL checks before calling the setup and
exit callbacks. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: bound get_version reply decode to front len
handle_get_version_reply() uses msg->front_alloc_len as the decode
boundary for MON_GET_VERSION_REPLY. That is the size of the reused
reply buffer, not the number of bytes actually received.
A truncated reply can therefore pass ceph_decode_need() and decode the
second u64 from stale tail bytes left in the buffer by an earlier
message, causing an uninitialized memory read.
Use msg->front.iov_len as the receive-side decode boundary, matching
other libceph reply handlers and limiting decoding to the bytes that
were actually read from the wire. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: require CAP_NET_ADMIN in the device netns for changelink
A tunnel changelink() operates on at most two netns, dev_net(dev) and
the sticky underlay netns vxlan->net. They differ once the device is
created in or moved to a netns other than the one the request runs in.
The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev),
so a caller privileged there but not in vxlan->net can rewrite a vxlan
device whose underlay lives in vxlan->net.
vxlan_changelink() validates and applies the new configuration against
vxlan->net (vxlan_config_validate(vxlan->net, ...)) and can reopen the
underlay socket in that netns, so the same reasoning as the tunnel
changelink series applies here.
Gate vxlan_changelink() with rtnl_dev_link_net_capable(), at the top of
the op before any attribute is parsed, matching ipgre_changelink() and
the rest of the "require CAP_NET_ADMIN in the device netns for
changelink" series.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp_mst: Handle torn-down topology gracefully in drm_dp_mst_topology_queue_probe()
A hotplug or link-loss event can tear down the MST topology
(setting mgr->mst_state = false and mgr->mst_primary = NULL) concurrently
with a caller invoking drm_dp_mst_topology_queue_probe(). Since the check
is already performed under mgr->lock, the condition is not a programming
error but a valid race -- the topology was valid when the caller decided
to call this function, but was torn down before the lock was acquired.
Replace the drm_WARN_ON() with a graceful early return. This eliminates
spurious kernel warnings and the resulting compositor crashes observed
when connecting/disconnecting DP MST monitors, while keeping the correct
behavior of doing nothing when MST is not active. A drm_dbg_mst() trace
is added so the skipped probe remains observable under MST debug logging.
The existing WARN_ON(mgr->mst_primary) in drm_dp_mst_topology_mgr_set_mst()
already catches the case where the topology is initialized twice, so no
diagnostic coverage is lost. |
| A time-of-check to time-of-use (TOCTOU) race condition in the installation and uninstallation process of certain Zoom Clients for Windows could allow an authenticated local user to escalate privileges. |
| FreeRDP before 3.30.0 contains an out-of-bounds vulnerability in kerberos_DecryptMessage() (winpr/libwinpr/sspi/Kerberos/kerberos.c). The 16-bit EC (extra count) field of a peer-supplied GSS Wrap token (RFC 4121) is used directly in pointer arithmetic to locate the encrypted regions without being bounds-checked, while only RRC and the total buffer length are validated. A malicious peer (server or client) can supply a large EC value (up to 0xFFFF) during CredSSP/NLA authentication, moving the decrypt operation's base pointers past the end of the ~60-byte token buffer. Because the AES-CTS-HMAC enctypes decrypt in place before the HMAC integrity check, this results in an out-of-bounds read and in-place out-of-bounds write, potentially leading to information disclosure, memory corruption, or denial of service. |
| FreeRDP before 3.30.0 contains a server-side authentication bypass in the RDSTLS handshake. When a server is configured with RdstlsSecurity = TRUE, the handshake dispatches inbound PDUs based solely on the attacker-supplied wire pduType without verifying that the received PDU is the one required at the current step. Because the rdpRdstls object is calloc-zeroed, its resultCode defaults to 0 (RDSTLS_RESULT_SUCCESS). An unauthenticated remote client can send a Capabilities PDU instead of the required Authentication Request PDU; rdstls_process_capabilities() returns success without ever setting resultCode, so the server responds with an AUTHRSP carrying resultCode SUCCESS and treats the session as authenticated without evaluating any password, redirection GUID, or auto-reconnect cookie. This affects the released FreeRDP 3.x series (e.g., 3.27.1) and master HEAD; at the time of the advisory no patched version was available. |
| A vulnerability has been identified in Solid Edge SE2025 (All versions < V225.0 Update 15), Solid Edge SE2026 (All versions < V226.0 Update 7). The affected applications contains an out of bounds read vulnerability while parsing specially crafted DFT files. This could allow an attacker to execute code in the context of the current process. |
| A vulnerability has been identified in Solid Edge SE2025 (All versions < V225.0 Update 15), Solid Edge SE2026 (All versions < V226.0 Update 7). The affected applications contains an out of bounds write vulnerability while parsing specially crafted DFT files. This could allow an attacker to execute code in the context of the current process. |
