CVE-2026-97718

CSRF in Secure Access Server v14.60

CVE-2026-97718 Is a cross-site request forgery vulnerability in version 14.60 of the Secure Access server.  Because of a bypassed security control, an attacker can cause an admin to create an account under their control.

CVSS 4.0 · 9.4 Critical EPSS < 1% KEV · Not listed

Vendors

Absolute

Products

Secure Access

CVE-2026-97635

Agent Zero Web UI XSS

The Agent Zero Web UI before 1.15 does not correctly sanitize user-provided input in chat messages or file uploads. When Agent Zero reproduces content in the chat interface, any injected JavaScript is executed in the context of the victim’s authenticated Agent Zero Web UI session.

CVSS 4.0 · 8.6 High EPSS < 1% KEV · Not listed

Vendors

Agent-zero

Products

Agent-zero

CVE-2026-97367

Keycloak-services: keycloak-services: dcr azp and sid claim substitution allows account rest session takeover

A flaw was found in the Keycloak Account REST API where it incorrectly handles session identification. A malicious client owner can manipulate their own security tokens to point to a different user's active session. This allows the attacker to access and modify the victim's account information, potentially leading to a full account takeover by changing the recovery email and resetting the password.

CVSS 3.1 · 6.4 Medium EPSS < 1% KEV · Not listed

Vendors

Redhat

Products

Build Keycloak Red Hat Single Sign On

CVE-2026-96447

Keycloak-services: keycloak-services: stateless token preferred_username fallback enables identity rebinding

A flaw was found in the TokenManager component of Keycloak, an open-source identity and access management solution. The issue occurs during the validation of stateless access tokens when the original user ID no longer exists. Keycloak incorrectly falls back to using the username to identify the user without verifying if the identity matches the original token subject. This could allow an attacker with an old token to gain access to a newly created service account if it shares the same client ID as a previously deleted one.

CVSS 3.1 · 4.2 Medium EPSS < 1% KEV · Not listed

Vendors

Redhat

Products

Build Keycloak Red Hat Single Sign On

CVE-2026-92693

FastNetMon: IPv6 Fragment header dereferenced without bounds check in shared packet parser

FastNetMon is a high-performance DDoS detector and sensor. In version 1.2.9 and earlier, parse_raw_packet_to_simple_packet_full() in src/simple_packet_parser_ng.cpp dereferences ipv6_extension_header_fragment_t when IpProtocolNumberIPV6_FRAG is present without first verifying that the eight-byte Fragment header remains. A crafted sFlow v5 RAW_PACKET_HEADER record can remotely reach this shared parser with the Fragment bytes omitted, causing an unauthenticated remote out-of-bounds read. The supplied harness detects the read under AddressSanitizer, but the advisory does not establish a production process crash. No fixed release is available as of this review.

CVSS 3.1 · 8.2 High EPSS < 1% KEV · Not listed

Vendors

Pavel-odintsov

Products

Fastnetmon

CVE-2026-7003

WIT SynApps Runtime 1.4.11 Hardcoded OAuth Credentials Disclosure

WIT SynApps Runtime through 1.4.11 contains a hardcoded credentials vulnerability that allows unauthenticated attackers to recover static OAuth clientId and clientSecret values embedded in JavaScript delivered to the frontend, such as in parameters.js. Attackers can extract these exposed application credentials to reproduce the application portion of the REDY authentication flow at the /web/api/v1/auth/token endpoint, undermining confidential-client assurance for the OAuth implementation.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed

Vendors

Wit

Products

Synapps Runtime

CVE-2026-77299

Regexp2: Unbounded memory amplification via large `{m}` quantifier on a zero-width subexpression

Regexp2 is a feature-rich RegExp engine for Go. Prior to version 2.3.0, when regexp2 compiles and matches a pattern containing a large fixed-count quantifier applied to a zero-width subexpression — e.g. (?:){50000000} — the match engine executes the empty loop body m-1 times, pushing two integers onto the backtracking stack on every iteration. Because the parser accepts any repetition count up to math.MaxInt32 and the backtracking stack grows without bound, a pattern of fewer than 20 bytes matched against an empty input can force multi-gigabyte allocation and OOM-kill the process. MatchTimeout does not fully mitigate this because the memory is allocated faster than the 100 ms timeout clock can fire. This issue has been patched in version 2.3.0.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed

Vendors

Dlclark

Products

Regexp2

CVE-2026-71450

Authentication bypass via alternate path in EasyIO Neo EC and CW Edge Controller

Authentication bypass using an alternate path or channel vulnerability in Johnson Controls EasyIO Neo EC and CW Edge Controller allows Authentication Bypass. This issue affects EasyIO Neo EC and CW Edge Controller: from EC 3.3b62 through EC 3.3b63 and from CW 3.3b24 through CW 3.3b25.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed

Vendors

Johnsoncontrols

Products

Easyio Neo Ec And Cw Edge Controller

CVE-2026-62301

MyTube: Visitor Can Access Hidden Video Metadata and Content

MyTube is a self-hosted downloader and player for several video websites. Prior to version 1.10.3, backend video access does not enforce the visitor role's intended public-only restriction when `loginEnabled=true` and a visitor password is configured. The frontend filter in `VideoContext.tsx` is only client-side, `roleBasedAuthMiddleware.ts` allows all visitor GET requests, and `storageService/videos.ts` performs `getVideos()` and `getVideoById(id)` queries without checking the caller's role or `visibility`. A visitor can enumerate `/api/videos` or request `/api/videos/:id` to retrieve hidden `visibility`=0 records, exposing titles, `sourceUrl` values, `videoPath` values, subtitle paths and `thumbnailPath` values. The `serveMountVideo()` path also serves mounted video files without `visibility` checks. Leaked paths work against unauthenticated `/videos/*` and `/subtitles/*` routes, allowing media downloads without credentials. The RSS visitor feed already filters `visibility`=1 content and is not the affected query path. Default loginEnabled=false single-user deployments are unaffected by this role-boundary issue because all callers are owner-equivalent. This issue is fixed in version 1.10.3.

CVSS 4.0 · 7.1 High EPSS < 1% KEV · Not listed

Vendors

Franklioxygen

Products

Mytube

CVE-2026-62264

PDF Reader MCP: HTTP transport accepts unauthenticated requests despite a configured MCP_API_KEY

PDF Reader MCP is a Model Context Protocol server for reading PDF documents. In versions 2.2.0 and later prior to 3.0.1, when `MCP_TRANSPORT=http` enables the opt-in HTTP server, `@sylphx/pdf-reader-mcp` reads `MCP_API_KEY` and logs that `X-API-Key` authentication is enabled but never validates the `X-API-Key` header on incoming requests. The `/mcp` endpoint consequently accepts unauthenticated clients. With the default bind address of `0.0.0.0`, any client able to reach the port can invoke every PDF tool and read any PDF the server process can open on the host, despite the misleading authentication-enabled startup log. URL-based sources additionally permit limited server-side request forgery; private and loopback destinations are blocked by default unless `--allow-private-ips` is set. The default `stdio` transport is unaffected. This issue is fixed in version 3.0.1.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed

Vendors

Sylphxai

Products

Pdf-reader-mcp

CVE-2026-61848

Crass: Non-ASCII characters cause superlinear CPU consumption

Crass is a Ruby CSS parser that's fully compliant with the CSS Syntax Level 3 specification. Prior to 1.0.7, when Crass parses input containing `non-ASCII characters`, inefficiencies in tracking the positions of `multi-byte characters` result in superlinear parsing time. An attacker-controlled CSS input consisting of many `non-ASCII characters` can therefore cause excessive CPU consumption and potentially denial of service. This issue is fixed in version 1.0.7.

CVSS 4.0 · 6.3 Medium EPSS < 1% KEV · Not listed

Vendors

Rgrove

Products

Crass

CVE-2026-61694

go-xrpl: ParseMPTAmountBinary: positive MPT amount silently decoded as negative (int64 wrap)

go-xrpl is a Go implementation of the XRP Ledger protocol. In versions through the June 18, 2026 revision identified by the advisory, `ParseMPTAmountBinary` in `internal/ledger/state/ripple_state.go` converts the eight-byte MPT magnitude using `num.Int64()` without checking that it fits in 63 bits. A positive magnitude of at least 2^63 silently wraps into a negative amount without an error. `ParseEscrow` passes 33-byte `sfAmount` fields to the parser and stores `MPTRaw()` in `EscrowData.MPTAmount`, causing incorrect downstream calculations and divergence from rippled's interpretation of the same escrow entry. Independently, `readMPTAmount` in `internal/tx/ledgerfields/decode_stream.go` accepts over-limit magnitudes and surfaces large decimal strings without enforcing the maximum signed 64-bit value. The public codec in codec/binarycodec/types/amount.go already rejects these values, leaving the internal decoders inconsistent with that safe path. A source fix is available in commit 9dbd3935ed6c54f0232f2291edf9c012a0900dd5.

CVSS 3.1 · 3.7 Low EPSS < 1% KEV · Not listed

Vendors

Lejamon

Products

Go-xrpl

CVE-2026-58273

Rucio: Authorisation Bypass on REST API endpoint for signing URLs

Rucio is a scientific data management framework. From 1.16.1 until 35.9.0, 38.6.0, and 41.0.0rc1, the /credentials/signurl endpoint reads X-Rucio-Account instead of the account stored in request.environ['issuer'] by token authentication. Any authenticated low-privilege user can supply root as the header value and pass the root-only get_signed_url permission check. The server then returns a presigned read, write, or delete URL for an attacker-selected object using stored S3, GCS, or Swift credentials, and X-Rucio-VO can select another tenant in multi-VO deployments. This permits data disclosure, modification, deletion, and cross-tenant access on cloud-backed RSEs. This issue is fixed in versions 35.9.0, 38.6.0, and 41.0.0rc1.

CVSS 3.1 · 8.1 High EPSS < 1% KEV · Not listed

Vendors

Rucio

Products

Rucio

CVE-2026-35549

MariaDB Server: MariaDB Server: Denial of Service via large packet with caching_sha2_password authentication plugin

An issue was discovered in MariaDB Server before 11.4.10, 11.5.x through 11.8.x before 11.8.6, and 12.x before 12.2.2. If the caching_sha2_password authentication plugin is installed, and some user accounts are configured to use it, a large packet can crash the server because sha256_crypt_r uses alloca.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed

Vendors

Mariadb

Products

Mariadb

CVE-2026-53980

Charmbracelet Wish 2.0.5 Path Traversal via git Middleware

Charmbracelet wish before 2.0.5 contains a path traversal vulnerability in the git middleware (charm.land/wish/v2) that allows authenticated SSH users to escape the configured repository directory by supplying crafted repo paths that bypass a flawed forward-slash-count containment check in git.Middleware(). Attackers can use a single-depth path ../evil, or on Windows a payload ..\..\evil that defeats the slash-count guard entirely, to read or write arbitrary repositories outside the intended root via git-upload-pack, git-upload-archive, or git-receive-pack.

CVSS 4.0 · 8.6 High EPSS < 1% KEV · Not listed

Vendors

Charmbracelet

Products

Wish

CVE-2026-19688

Keycloak-services: keycloak-services: admin api missing audience check

A flaw was found in the Admin REST API of Keycloak, an identity and access management solution. The Admin API fails to verify the intended audience of bearer tokens during authentication. This issue allows an attacker who operates a client within a realm to capture an administrator's access token and reuse it to perform unauthorized administrative actions, potentially leading to full realm compromise.

CVSS 3.1 · 6.8 Medium EPSS < 1% KEV · Not listed

Vendors

Redhat

Products

Build Keycloak Red Hat Single Sign On

CVE-2026-19608

Keycloak-services: keycloak-services: name-only group claims let same-name groups satisfy path-specific group policies

A flaw was found in the group policy provider of Keycloak authorization services, which is used to manage fine-grained access control to resources. The issue occurs when the system evaluates group-based policies using tokens that only contain group names rather than full paths. If two groups in different parts of the organization share the same name, a user in the unauthorized group can be mistaken for a member of the authorized group. This can allow a user to gain unauthorized access to protected resources they should not be able to reach.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed

Vendors

Redhat

Products

Build Keycloak Build Of Keycloak Red Hat Single Sign On and 1 more

CVE-2026-15713

Libsoup: soupcache: libsoup: http/2 frame window exhaustion remote denial of service via memory leak

A vulnerability was found in libsoup's HTTP/2 protocol implementation. The library fails to correctly release memory context blocks under specific stream termination conditions, such as when an HTTP/2 connection encounters window exhaustion or explicit stream resets. A remote, unauthenticated attacker acting as a malicious network peer can trick the connection engine into allocating stream states that are subsequently leaked during cleanup. Over a sustained period, this flaw allows the remote attacker to consume the system's heap allocations incrementally, triggering a denial of service (DoS) through an ultimate Out-of-Memory (OOM) application crash.

CVSS 3.1 · 5.9 Medium EPSS < 1% KEV · Not listed

Vendors

Libsoup Redhat

Products

Libsoup Enterprise Linux Rhel Els

CVE-2026-123675

OpenBMB Internet of Agents Code Executor Tool code_executor.py execute_code code injection

A flaw has been found in OpenBMB Internet of Agents up to 9d78e88e47160eb42ee1ee8538c05e1c2c47877a. This affects the function execute_code of the file im_client/agents/tools/code_executor.py of the component Code Executor Tool. This manipulation of the argument filename/lang causes code injection. The attack can be initiated remotely. The exploit has been published and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed

Vendors

Openbmb

Products

Internet Of Agents

CVE-2026-123621

Usermin through 2.570 Path Traversal File Write via detachall.cgi

Usermin through 2.570 contains a path traversal vulnerability in mailbox/detachall.cgi that allows remote unauthenticated attackers to write files outside the temporary directory via unsanitized attachment filenames. Attackers can email attachments with ../ sequences in filenames, and when the recipient downloads all attachments, files like ~/.forward are overwritten, enabling command execution.

CVSS 4.0 · 8.6 High EPSS < 1% KEV · Not listed

Vendors

Webmin

Products

Usermin