| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in an access control mechanism of Cisco Cyber Vision Center Software could allow an unauthenticated, remote attacker to bypass authentication and access internal services that are running on an affected device. The vulnerability is due to insufficient enforcement of access control in the software. An attacker could exploit this vulnerability by directly accessing the internal services of an affected device. A successful exploit could allow an attacker to impact monitoring of sensors that are managed by the software. |
| The Windows Logon installer prior to 4.1.2 did not properly validate file installation paths. This allows an attacker with local user privileges to coerce the installer to write to arbitrary privileged directories. If successful, an attacker can manipulate files used by Windows Logon, cause Denial of Service (DoS) by deleting file(s), or replace system files to potentially achieve elevation of privileges. Note that this can only exploitable during new installations while the installer is running and is not exploitable once installation is finished. Versions 4.1.2 of Windows Logon addresses this issue. |
| A vulnerability in Cisco IOS XE Wireless Controller Software for Cisco Catalyst 9800 Series Routers could allow an unauthenticated, adjacent attacker to send ICMPv6 traffic prior to the client being placed into RUN state. The vulnerability is due to an incomplete access control list (ACL) being applied prior to RUN state. An attacker could exploit this vulnerability by connecting to the associated service set identifier (SSID) and sending ICMPv6 traffic. A successful exploit could allow the attacker to send ICMPv6 traffic prior to RUN state. |
| A vulnerability in the scheduled meeting template feature of Cisco Webex Meetings could allow an authenticated, remote attacker to delete a scheduled meeting template that belongs to another user in their organization. The vulnerability is due to insufficient authorization enforcement for requests to delete scheduled meeting templates. An attacker could exploit this vulnerability by sending a crafted request to the Webex Meetings interface to delete a scheduled meeting template. A successful exploit could allow the attacker to delete a scheduled meeting template that belongs to a user other than themselves. |
| A vulnerability in the scheduled meeting template feature of Cisco Webex Meetings could allow an authenticated, remote attacker to create a scheduled meeting template that would belong to another user in their organization. The vulnerability is due to insufficient authorization enforcement for the creation of scheduled meeting templates. An attacker could exploit this vulnerability by sending a crafted request to the Webex Meetings interface to create a scheduled meeting template. A successful exploit could allow the attacker to create a scheduled meeting template that would belong to a user other than themselves. |
| A vulnerability in the file system on the pluggable USB 3.0 Solid State Drive (SSD) for Cisco IOS XE Software could allow an authenticated, physical attacker to remove the USB 3.0 SSD and modify sensitive areas of the file system, including the namespace container protections. The vulnerability occurs because the USB 3.0 SSD control data is not stored on the internal boot flash. An attacker could exploit this vulnerability by removing the USB 3.0 SSD, modifying or deleting files on the USB 3.0 SSD by using another device, and then reinserting the USB 3.0 SSD on the original device. A successful exploit could allow the attacker to remove container protections and perform file actions outside the namespace of the container with root privileges. |
| A vulnerability in the Enable Secret feature of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an authenticated, local attacker to issue the enable command and get full administrative privileges. To exploit this vulnerability, the attacker would need to have valid credentials for the affected device. The vulnerability is due to a logic error in the implementation of the enable command. An attacker could exploit this vulnerability by logging in to the device and issuing the enable command. A successful exploit could allow the attacker to gain full administrative privileges without using the enable password. Note: The Enable Secret feature is disabled by default. |
| A vulnerability in the CLI of Cisco SD-WAN vManage Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated to access the CLI. A successful exploit could allow the attacker to execute commands with root privileges. |
| A vulnerability in the REST API endpoint of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker with a low-privileged account to bypass authorization on the API of an affected device. The vulnerability is due to insufficient authorization of certain API functions. An attacker could exploit this vulnerability by sending a crafted request to the API using low-privileged credentials. A successful exploit could allow the attacker to perform arbitrary actions through the REST API with administrative privileges. |
| A vulnerability in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization, enabling them to access sensitive information, modify the system configuration, or impact the availability of the affected system. The vulnerability is due to insufficient authorization checking on the affected system. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to gain privileges beyond what would normally be authorized for their configured user authorization level. The attacker may be able to access sensitive information, modify the system configuration, or impact the availability of the affected system. |
| A vulnerability in the access control list (ACL) functionality of the standby route processor management interface of Cisco IOS XR Software could allow an unauthenticated, remote attacker to reach the configured IP addresses on the standby route processor management Gigabit Ethernet Management interface. The vulnerability is due to a logic error that was introduced in the Cisco IOS XR Software, which prevents the ACL from working when applied against the standby route processor management interface. An attacker could exploit this vulnerability by attempting to access the device through the standby route processor management interface. |
| A vulnerability in Cisco Webex Meetings and Cisco Webex Meetings Server could allow an unauthenticated, remote attacker to gain unauthorized access to a vulnerable Webex site. The vulnerability is due to improper handling of authentication tokens by a vulnerable Webex site. An attacker could exploit this vulnerability by sending crafted requests to a vulnerable Cisco Webex Meetings or Cisco Webex Meetings Server site. If successful, the attacker could gain the privileges of another user within the affected Webex site. |
| A vulnerability in role-based access control of Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow a read-only authenticated, remote attacker to disable user accounts on an affected system. The vulnerability is due to incorrect allocation of the enable/disable action button under the role-based access control code on an affected system. An attacker could exploit this vulnerability by authenticating as a read-only user and then updating the roles of other users to disable them. A successful exploit could allow the attacker to disable users, including administrative users. |
| A vulnerability in session management for the web-based interface of Cisco Small Business Smart and Managed Switches could allow an unauthenticated, remote attacker to defeat authentication protections and gain unauthorized access to the management interface. The attacker could obtain the privileges of the highjacked session account, which could include administrator privileges on the device. The vulnerability is due to the use of weak entropy generation for session identifier values. An attacker could exploit this vulnerability to determine a current session identifier through brute force and reuse that session identifier to take over an ongoing session. In this way, an attacker could take actions within the management interface with privileges up to the level of the administrative user. |
| A vulnerability in the enhanced Preboot eXecution Environment (PXE) boot loader for Cisco IOS XR 64-bit Software could allow an unauthenticated, remote attacker to execute unsigned code during the PXE boot process on an affected device. The PXE boot loader is part of the BIOS and runs over the management interface of hardware platforms that are running Cisco IOS XR Software only. The vulnerability exists because internal commands that are issued when the PXE network boot process is loading a software image are not properly verified. An attacker could exploit this vulnerability by compromising the PXE boot server and replacing a valid software image with a malicious one. Alternatively, the attacker could impersonate the PXE boot server and send a PXE boot reply with a malicious file. A successful exploit could allow the attacker to execute unsigned code on the affected device. Note: To fix this vulnerability, both the Cisco IOS XR Software and the BIOS must be upgraded. The BIOS code is included in Cisco IOS XR Software but might require additional installation steps. For further information, see the Fixed Software section of this advisory. |
| A vulnerability in the API subsystem of Cisco Unified Contact Center Express (Unified CCX) could allow an authenticated, remote attacker to change the availability state of any agent. The vulnerability is due to insufficient authorization enforcement on an affected system. An attacker could exploit this vulnerability by authenticating to an affected system with valid agent credentials and performing a specific API call with crafted input. A successful exploit could allow the attacker to change the availability state of an agent, potentially causing a denial of service condition. |
| A vulnerability in the support tunnel feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to access the shell of an affected device even though expert mode is disabled. The vulnerability is due to improper configuration of the support tunnel feature. An attacker could exploit this vulnerability by enabling the support tunnel, setting a key, and deriving the tunnel password. A successful exploit could allow the attacker to run any system command with root access on an affected device. |
| A vulnerability in the web application of Cisco Smart Software Manager On-Prem (SSM On-Prem) could allow an unauthenticated, remote attacker to create arbitrary user accounts. The vulnerability is due to the lack of authorization controls in the web application. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to add user accounts to the configuration of an affected device. These accounts would not be administrator or operator accounts. |
| A vulnerability in the 802.1X feature of Cisco Catalyst 2960-L Series Switches and Cisco Catalyst CDB-8P Switches could allow an unauthenticated, adjacent attacker to forward broadcast traffic before being authenticated on the port. The vulnerability exists because broadcast traffic that is received on the 802.1X-enabled port is mishandled. An attacker could exploit this vulnerability by sending broadcast traffic on the port before being authenticated. A successful exploit could allow the attacker to send and receive broadcast traffic on the 802.1X-enabled port before authentication. |
| A vulnerability in Cisco IOS XE SD-WAN Software could allow an unauthenticated, physical attacker to bypass authentication and gain unrestricted access to the root shell of an affected device. The vulnerability exists because the affected software has insufficient authentication mechanisms for certain commands. An attacker could exploit this vulnerability by stopping the boot initialization of an affected device. A successful exploit could allow the attacker to bypass authentication and gain unrestricted access to the root shell of the affected device. |
