| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| SCRAM (Salted Challenge Response Authentication Mechanism) is part of the family of Simple Authentication and Security Layer (SASL, RFC 4422) authentication mechanisms. Prior to version 3.2, a timing attack vulnerability exists in the SCRAM Java implementation. The issue arises because Arrays.equals was used to compare secret values such as client proofs and server signatures. Since Arrays.equals performs a short-circuit comparison, the execution time varies depending on how many leading bytes match. This behavior could allow an attacker to perform a timing side-channel attack and potentially infer sensitive authentication material. All users relying on SCRAM authentication are impacted. This vulnerability has been patched in version 3.1 by replacing Arrays.equals with MessageDigest.isEqual, which ensures constant-time comparison. |
| Incorrect access control in the realtime.cgi endpoint of Deep Sea Electronics devices DSE855 v1.1.0 to v1.1.26 allows attackers to gain access to the admin panel and complete control of the device. |
| An attacker can arbitrarily craft malicious DDS Participants (or ROS 2 Nodes) with valid certificates to compromise and get full control of the attacked secure DDS databus system by exploiting vulnerable attributes in the configuration of PKCS#7 certificate’s validation. This is caused by a non-compliant implementation of permission document verification used by some DDS vendors. Specifically, an improper use of the OpenSSL PKCS7_verify function used to validate S/MIME signatures. |
| The Context Blog theme for WordPress is vulnerable to Information Exposure in all versions up to, and including, 1.2.5 via the 'context_blog_modal_popup' due to insufficient restrictions on which posts can be included. This makes it possible for unauthenticated attackers to extract data from password protected, private, or draft posts that they should not have access to. |
| An attacker can arbitrarily craft malicious DDS Participants (or ROS 2 Nodes) with valid certificates to compromise and get full control of the attacked secure DDS databus system by exploiting vulnerable attributes in the configuration of PKCS#7 certificate’s validation. This is caused by a non-compliant implementation of permission document verification used by some DDS vendors. Specifically, an improper use of the OpenSSL PKCS7_verify function used to validate S/MIME signatures. |
| The Bare Metal Operator (BMO) implements a Kubernetes API for managing bare metal hosts in Metal3. Baremetal Operator enables users to load Secret from arbitrary namespaces upon deployment of the namespace scoped Custom Resource `BMCEventSubscription`. Prior to versions 0.8.1 and 0.9.1, an adversary Kubernetes account with only namespace level roles (e.g. a tenant controlling a namespace) may create a `BMCEventSubscription` in his authorized namespace and then load Secrets from his unauthorized namespaces to his authorized namespace via the Baremetal Operator, causing Secret Leakage. The patch makes BMO refuse to read Secrets from other namespace than where the corresponding BMH resource is. The patch does not change the `BMCEventSubscription` API in BMO, but stricter validation will fail the request at admission time. It will also prevent the controller reading such Secrets, in case the BMCES CR has already been deployed. The issue exists for all versions of BMO, and is patched in BMO releases v0.9.1 and v0.8.1. Prior upgrading to patched BMO version, duplicate any existing Secret pointed to by `BMCEventSubscription`'s `httpHeadersRef` to the same namespace where the corresponding BMH exists. After upgrade, remove the old Secrets. As a workaround, the operator can configure BMO RBAC to be namespace scoped, instead of cluster scoped, to prevent BMO from accessing Secrets from other namespaces, and/or use `WATCH_NAMESPACE` configuration option to limit BMO to single namespace. |
| The gh cli is GitHub’s official command line tool. A security vulnerability has been identified in the GitHub CLI that could leak authentication tokens when cloning repositories containing `git` submodules hosted outside of GitHub.com and ghe.com. This vulnerability stems from several `gh` commands used to clone a repository with submodules from a non-GitHub host including `gh repo clone`, `gh repo fork`, and `gh pr checkout`. These GitHub CLI commands invoke git with instructions to retrieve authentication tokens using the `credential.helper` configuration variable for any host encountered. Prior to version `2.63.0`, hosts other than GitHub.com and ghe.com are treated as GitHub Enterprise Server hosts and have tokens sourced from the following environment variables before falling back to host-specific tokens stored within system-specific secured storage: 1. `GITHUB_ENTERPRISE_TOKEN`, 2. `GH_ENTERPRISE_TOKEN` and 3. `GITHUB_TOKEN` when the `CODESPACES` environment variable is set. The result being `git` sending authentication tokens when cloning submodules. In version `2.63.0`, these GitHub CLI commands will limit the hosts for which `gh` acts as a credential helper to source authentication tokens. Additionally, `GITHUB_TOKEN` will only be used for GitHub.com and ghe.com. Users are advised to upgrade. Additionally users are advised to revoke authentication tokens used with the GitHub CLI and to review their personal security log and any relevant audit logs for actions associated with their account or enterprise |
| A vulnerability classified as critical has been found in thu-pacman chitu 0.1.0. This affects the function torch.load of the file chitu/chitu/backend.py. The manipulation of the argument ckpt_path/quant_ckpt_dir leads to deserialization. An attack has to be approached locally. |
| An attacker can arbitrarily craft malicious DDS Participants (or ROS 2 Nodes) with valid certificates to compromise and get full control of the attacked secure DDS databus system by exploiting vulnerable attributes in the configuration of PKCS#7 certificate’s validation. This is caused by a non-compliant implementation of permission document verification used by some DDS vendors. Specifically, an improper use of the OpenSSL PKCS7_verify function used to validate S/MIME signatures. |
| matrix-js-sdk is the Matrix Client-Server SDK for JavaScript and TypeScript. In matrix-js-sdk versions versions 9.11.0 through 34.7.0, the method `MatrixClient.sendSharedHistoryKeys` is vulnerable to interception by malicious homeservers. The method was introduced by MSC3061) and is commonly used to share historical message keys with newly invited users, granting them access to past messages in the room. However, it unconditionally sends these "shared" keys to all of the invited user's devices, regardless of whether the user's cryptographic identity is verified or whether the user's devices are signed by that identity. This allows the attacker to potentially inject its own devices to receive sensitive historical keys without proper security checks. Note that this only affects clients running the SDK with the legacy crypto stack. Clients using the new Rust cryptography stack (i.e. those that call `MatrixClient.initRustCrypto()` instead of `MatrixClient.initCrypto()`) are unaffected by this vulnerability, because `MatrixClient.sendSharedHistoryKeys()` raises an exception in such environments. The vulnerability was fixed in matrix-js-sdk 34.8.0 by removing the vulnerable functionality. As a workaround, remove use of affected functionality from clients. |
| A security issue was discovered in ingress-nginx https://github.com/kubernetes/ingress-nginx where the `auth-url` Ingress annotation can be used to inject configuration into nginx. This can lead to arbitrary code execution in the context of the ingress-nginx controller, and disclosure of Secrets accessible to the controller. (Note that in the default installation, the controller can access all Secrets cluster-wide.) |
| ACON is a widely-used library of tools for machine learning that focuses on adaptive correlation optimization. A potential vulnerability has been identified in the input validation process, which could lead to arbitrary code execution if exploited. This issue could allow an attacker to submit malicious input data, bypassing input validation, resulting in remote code execution in certain machine learning applications using the ACON library. All users utilizing ACON’s input-handling functions are potentially at risk. Specifically, machine learning models or applications that ingest user-generated data without proper sanitization are the most vulnerable. Users running ACON on production servers are at heightened risk, as the vulnerability could be exploited remotely. As of time of publication, it is unclear whether a fix is available. |
| KUNO CMS is a fully deployable full-stack blog application. In versions prior to 1.3.15, an SSRF (Server-Side Request Forgery) vulnerability exists in the Media module of the Kuno CMS administrative panel. A logged-in administrator can upload a specially crafted SVG file containing an external image reference, causing the server to initiate an outgoing connection to an arbitrary external URL. This can lead to information disclosure or internal network probing. Version 1.3.15 contains a fix for the issue. |
| RSSHub is an RSS network. Prior to commit 64e00e7, RSSHub's `docker-test-cont.yml` workflow is vulnerable to Artifact Poisoning, which could have lead to a full repository takeover. Downstream users of RSSHub are not vulnerable to this issue, and commit 64e00e7 fixed the underlying issue and made the repository no longer vulnerable. The `docker-test-cont.yml` workflow gets triggered when the `PR - Docker build test` workflow completes successfully. It then collects some information about the Pull Request that triggered the triggering workflow and set some labels depending on the PR body and sender. If the PR also contains a `routes` markdown block, it will set the `TEST_CONTINUE` environment variable to `true`. The workflow then downloads and extracts an artifact uploaded by the triggering workflow which is expected to contain a single `rsshub.tar.zst` file. However, prior to commit 64e00e7, it did not validate and the contents were extracted in the root of the workspace overriding any existing files. Since the contents of the artifact were not validated, it is possible for a malicious actor to send a Pull Request which uploads, not just the `rsshub.tar.zst` compressed docker image, but also a malicious `package.json` file with a script to run arbitrary code in the context of the privileged workflow. As of commit 64e00e7, this scenario has been addressed and the RSSHub repository is no longer vulnerable. |
| The AuthKit library for React Router 7+ provides helpers for authentication and session management using WorkOS & AuthKit with React Router. In versions 0.6.1 and below, @workos-inc/authkit-react-router exposed sensitive authentication artifacts — specifically sealedSession and accessToken by returning them from the authkitLoader. This caused them to be rendered into the browser HTML. This issue is fixed in version 0.7.0. |
| Improper input validation in the UEFI firmware DXE module for the Intel(R) Server D50DNP and M50FCP boards may allow a privileged user to potentially enable escalation of privilege via local access. |
| A vulnerability has been found in zlt2000 microservices-platform up to 6.0.0 and classified as problematic. This vulnerability affects unknown code of the file /actuator of the component Spring Actuator Interface. The manipulation leads to information disclosure. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability has been identified in BACnet ATEC 550-440 (All versions), BACnet ATEC 550-441 (All versions), BACnet ATEC 550-445 (All versions), BACnet ATEC 550-446 (All versions). Affected devices improperly handle specific incoming BACnet MSTP messages. This could allow an attacker residing in the same BACnet network to send a specially crafted MSTP message that results in a denial of service condition of the targeted device. A power cycle is required to restore the device's normal operation. |
| A vulnerability, which was classified as problematic, has been found in Tsinghua Unigroup Electronic Archives System 3.2.210802(62532). Affected by this issue is the function download of the file /collect/PortV4/downLoad.html. The manipulation of the argument path leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. |
| MyDumper is a MySQL Logical Backup Tool. The MySQL C client library (libmysqlclient) allows authenticated remote actors to read arbitrary files from client systems via a crafted server response to LOAD LOCAL INFILE query, leading to sensitive information disclosure when clients connect to untrusted MySQL servers without explicitly disabling the local infile capability. Mydumper has the local infile option enabled by default and does not have an option to disable it. This can lead to an unexpected arbitrary file read if the Mydumper tool connects to an untrusted server. This vulnerability is fixed in 0.18.2-8. |
