| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Contiki-NG is an open-source, cross-platform operating system for internet of things devices. In verions prior to 4.6, an attacker can perform a denial-of-service attack by triggering an infinite loop in the processing of IPv6 neighbor solicitation (NS) messages. This type of attack can effectively shut down the operation of the system because of the cooperative scheduling used for the main parts of Contiki-NG and its communication stack. The problem has been patched in Contiki-NG 4.6. Users can apply the patch for this vulnerability out-of-band as a workaround. |
| kamadak-exif is an exif parsing library written in pure Rust. In kamadak-exif version 0.5.2, there is an infinite loop in parsing crafted PNG files. Specifically, reader::read_from_container can cause an infinite loop when a crafted PNG file is given. This is fixed in version 0.5.3. No workaround is available. Applications that do not pass files with the PNG signature to Reader::read_from_container are not affected. |
| An infinite loop in SMLLexer in Pygments versions 1.5 to 2.7.3 may lead to denial of service when performing syntax highlighting of a Standard ML (SML) source file, as demonstrated by input that only contains the "exception" keyword. |
| An infinite loop flaw was found in the e1000 NIC emulator of the QEMU. This issue occurs while processing transmits (tx) descriptors in process_tx_desc if various descriptor fields are initialized with invalid values. This flaw allows a guest to consume CPU cycles on the host, resulting in a denial of service. The highest threat from this vulnerability is to system availability. |
| A stack overflow via an infinite recursion vulnerability was found in the eepro100 i8255x device emulator of QEMU. This issue occurs while processing controller commands due to a DMA reentry issue. This flaw allows a guest user or process to consume CPU cycles or crash the QEMU process on the host, resulting in a denial of service. The highest threat from this vulnerability is to system availability. |
| An unauthenticated and remote adversary can consume all of the device's CPU due to crafted HTTP requests sent to SMA100 /fileshare/sonicfiles/sonicfiles resulting in a loop with unreachable exit condition. This vulnerability affected SMA 200, 210, 400, 410 and 500v appliances. |
| Loop with unreachable exit condition may occur due to improper handling of unsupported input in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Voice & Music, Snapdragon Wearables |
| ASP.NET Core and Visual Studio Denial of Service Vulnerability |
| A vulnerability in the Common Open Policy Service (COPS) of Cisco IOS XE Software for Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, remote attacker to cause resource exhaustion, resulting in a denial of service (DoS) condition. This vulnerability is due to a deadlock condition in the code when processing COPS packets under certain conditions. An attacker could exploit this vulnerability by sending COPS packets with high burst rates to an affected device. A successful exploit could allow the attacker to cause the CPU to consume excessive resources, which prevents other control plane processes from obtaining resources and results in a DoS. |
| A vulnerability in the Excel XLM macro parsing module in Clam AntiVirus (ClamAV) Software versions 0.103.0 and 0.103.1 could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. The vulnerability is due to improper error handling that may result in an infinite loop. An attacker could exploit this vulnerability by sending a crafted Excel file to an affected device. An exploit could allow the attacker to cause the ClamAV scanning process hang, resulting in a denial of service condition. |
| In ellipsize of Layout.java, there is a possible ANR due to improper input validation. This could lead to local denial of service with no additional execution privileges needed. User interaction is needed for exploitation.Product: AndroidVersions: Android-9 Android-10 Android-11 Android-8.1Android ID: A-188913943 |
| An always-incorrect control flow implementation in the implicit filter terms of Juniper Networks Junos OS and Junos OS Evolved on ACX5800, EX9200 Series, MX10000 Series, MX240, MX480, MX960 devices with affected Trio line cards allows an attacker to exploit an interdependency in the PFE UCODE microcode of the Trio chipset with various line cards to cause packets destined to the devices interfaces to cause a Denial of Service (DoS) condition by looping the packet with an unreachable exit condition ('Infinite Loop'). To break this loop once it begins one side of the affected LT interfaces will need to be disabled. Once disabled, the condition will clear and the disabled LT interface can be reenabled. Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. This issue only affects LT-LT interfaces. Any other interfaces are not affected by this issue. This issue affects the following cards: MPCE Type 3 3D MPC4E 3D 32XGE MPC4E 3D 2CGE+8XGE EX9200 32x10G SFP EX9200-2C-8XS FPC Type 5-3D FPC Type 5-LSR EX9200 4x40G QSFP An Indicator of Compromise (IoC) can be seen by examining the traffic of the LT-LT interfaces for excessive traffic using the following command: monitor interface traffic Before loop impact: Interface: lt-2/0/0, Enabled, Link is Up Encapsulation: Logical-tunnel, Speed: 100000mbps Traffic statistics: Current delta Input bytes: 3759900268942 (1456 bps) [0] <---------- LT interface utilization is low Output bytes: 3759900344309 (1456 bps) [0] <---------- LT interface utilization is low After loop impact: Interface: lt-2/0/0, Enabled, Link is Up Encapsulation: Logical-tunnel, Speed: 100000mbps Traffic statistics: Current delta Input bytes: 3765160313129 (2158268368 bps) [5260044187] <---------- LT interface utilization is very high Output bytes: 3765160399522 (2158266440 bps) [5260055213] <---------- LT interface utilization is very high This issue affects: Juniper Networks Junos OS on ACX5800, EX9200 Series, MX10000 Series, MX240, MX480, MX960. Versions 15.1F6, 16.1R1, and later versions prior to 16.1R7-S8; 17.1 versions prior to 17.1R2-S12; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S10, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S3; 18.3 versions prior to 18.3R1-S7, 18.3R3-S2; 18.4 versions prior to 18.4R1-S7, 18.4R2-S4, 18.4R3-S2; 19.1 versions prior to 19.1R1-S5, 19.1R2-S1, 19.1R3; 19.2 versions prior to 19.2R1-S4, 19.2R2; 19.3 versions prior to 19.3R2-S3, 19.3R3; 19.4 versions prior to 19.4R1-S1, 19.4R2. This issue does not affect the MX10001. This issue does not affect Juniper Networks Junos OS versions prior to 15.1F6, 16.1R1. Juniper Networks Junos OS Evolved on ACX5800, EX9200 Series, MX10000 Series, MX240, MX480, MX960 19.4 versions prior to 19.4R2-EVO. This issue does not affect the MX10001. |
| In an EVPN/VXLAN scenario, if an IRB interface with a virtual gateway address (VGA) is configured on a PE, a traffic loop may occur upon receipt of specific IP multicast traffic. The traffic loop will cause interface traffic to increase abnormally, ultimately leading to a Denial of Service (DoS) in packet processing. The following command could be used to monitor the interface traffic: user@junos> monitor interface traffic Interface Link Input packets (pps) Output packets (pps) et-0/0/1 Up 6492089274364 (70994959) 6492089235319 (70994956) et-0/0/25 Up 343458103 (1) 156844 (0) ae0 Up 9132519197257 (70994959) 9132519139454 (70994956) This issue affects Juniper Networks Junos OS on QFX Series: all versions prior to 17.3R3-S10; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S5, 18.4R3-S5; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S3; 19.2 versions prior to 19.2R1-S5, 19.2R3-S1; 19.3 versions prior to 19.3R2-S5, 19.3R3; 19.4 versions prior to 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R1-S2, 20.2R2. |
| A carefully crafted or corrupt file may trigger a System.exit in Tika's OneNote Parser. Crafted or corrupted files can also cause out of memory errors and/or infinite loops in Tika's ICNSParser, MP3Parser, MP4Parser, SAS7BDATParser, OneNoteParser and ImageParser. Apache Tika users should upgrade to 1.24.1 or later. The vulnerabilities in the MP4Parser were partially fixed by upgrading the com.googlecode:isoparser:1.1.22 dependency to org.tallison:isoparser:1.9.41.2. For unrelated security reasons, we upgraded org.apache.cxf to 3.3.6 as part of the 1.24.1 release. |
| Hirschmann OS2, RSP, and RSPE devices before HiOS 08.3.00 allow a denial of service. An unauthenticated, adjacent attacker can cause an infinite loop on one of the HSR ring ports of the device. This effectively breaks the redundancy of the HSR ring. If the attacker can perform the same attack on a second device, the ring is broken into two parts (thus disrupting communication between devices in the different parts). |
| ext4_protect_reserved_inode in fs/ext4/block_validity.c in the Linux kernel through 5.5.3 allows attackers to cause a denial of service (soft lockup) via a crafted journal size. |
| pmm-server in Percona Monitoring and Management (PMM) 2.2.x before 2.2.1 allows unauthenticated denial of service. |
| xmlStringLenDecodeEntities in parser.c in libxml2 2.9.10 has an infinite loop in a certain end-of-file situation. |
| Inappropriate Encoding for output context vulnerability in McAfee Web Gateway (MWG) prior to 9.2.1 allows a remote attacker to cause MWG to return an ambiguous redirect response via getting a user to click on a malicious URL. |
| lib-smtp in submission-login and lmtp in Dovecot 2.3.9 before 2.3.9.3 mishandles truncated UTF-8 data in command parameters, as demonstrated by the unauthenticated triggering of a submission-login infinite loop. |
