| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_osf: fix possible bogus match in nf_osf_find()
nf_osf_find() incorrectly returns true on mismatch, this leads to
copying uninitialized memory area in nft_osf which can be used to leak
stale kernel stack data to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qcom-rng - ensure buffer for generate is completely filled
The generate function in struct rng_alg expects that the destination
buffer is completely filled if the function returns 0. qcom_rng_read()
can run into a situation where the buffer is partially filled with
randomness and the remaining part of the buffer is zeroed since
qcom_rng_generate() doesn't check the return value. This issue can
be reproduced by running the following from libkcapi:
kcapi-rng -b 9000000 > OUTFILE
The generated OUTFILE will have three huge sections that contain all
zeros, and this is caused by the code where the test
'val & PRNG_STATUS_DATA_AVAIL' fails.
Let's fix this issue by ensuring that qcom_rng_read() always returns
with a full buffer if the function returns success. Let's also have
qcom_rng_generate() return the correct value.
Here's some statistics from the ent project
(https://www.fourmilab.ch/random/) that shows information about the
quality of the generated numbers:
$ ent -c qcom-random-before
Value Char Occurrences Fraction
0 606748 0.067416
1 33104 0.003678
2 33001 0.003667
...
253 � 32883 0.003654
254 � 33035 0.003671
255 � 33239 0.003693
Total: 9000000 1.000000
Entropy = 7.811590 bits per byte.
Optimum compression would reduce the size
of this 9000000 byte file by 2 percent.
Chi square distribution for 9000000 samples is 9329962.81, and
randomly would exceed this value less than 0.01 percent of the
times.
Arithmetic mean value of data bytes is 119.3731 (127.5 = random).
Monte Carlo value for Pi is 3.197293333 (error 1.77 percent).
Serial correlation coefficient is 0.159130 (totally uncorrelated =
0.0).
Without this patch, the results of the chi-square test is 0.01%, and
the numbers are certainly not random according to ent's project page.
The results improve with this patch:
$ ent -c qcom-random-after
Value Char Occurrences Fraction
0 35432 0.003937
1 35127 0.003903
2 35424 0.003936
...
253 � 35201 0.003911
254 � 34835 0.003871
255 � 35368 0.003930
Total: 9000000 1.000000
Entropy = 7.999979 bits per byte.
Optimum compression would reduce the size
of this 9000000 byte file by 0 percent.
Chi square distribution for 9000000 samples is 258.77, and randomly
would exceed this value 42.24 percent of the times.
Arithmetic mean value of data bytes is 127.5006 (127.5 = random).
Monte Carlo value for Pi is 3.141277333 (error 0.01 percent).
Serial correlation coefficient is 0.000468 (totally uncorrelated =
0.0).
This change was tested on a Nexus 5 phone (msm8974 SoC). |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: Change nla_policy for bearer-related names to NLA_NUL_STRING
syzbot reported the following uninit-value access issue [1]:
=====================================================
BUG: KMSAN: uninit-value in strlen lib/string.c:418 [inline]
BUG: KMSAN: uninit-value in strstr+0xb8/0x2f0 lib/string.c:756
strlen lib/string.c:418 [inline]
strstr+0xb8/0x2f0 lib/string.c:756
tipc_nl_node_reset_link_stats+0x3ea/0xb50 net/tipc/node.c:2595
genl_family_rcv_msg_doit net/netlink/genetlink.c:971 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1051 [inline]
genl_rcv_msg+0x11ec/0x1290 net/netlink/genetlink.c:1066
netlink_rcv_skb+0x371/0x650 net/netlink/af_netlink.c:2545
genl_rcv+0x40/0x60 net/netlink/genetlink.c:1075
netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
netlink_unicast+0xf47/0x1250 net/netlink/af_netlink.c:1368
netlink_sendmsg+0x1238/0x13d0 net/netlink/af_netlink.c:1910
sock_sendmsg_nosec net/socket.c:730 [inline]
sock_sendmsg net/socket.c:753 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595
__sys_sendmsg net/socket.c:2624 [inline]
__do_sys_sendmsg net/socket.c:2633 [inline]
__se_sys_sendmsg net/socket.c:2631 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2631
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was created at:
slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:559
__alloc_skb+0x318/0x740 net/core/skbuff.c:650
alloc_skb include/linux/skbuff.h:1286 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1214 [inline]
netlink_sendmsg+0xb34/0x13d0 net/netlink/af_netlink.c:1885
sock_sendmsg_nosec net/socket.c:730 [inline]
sock_sendmsg net/socket.c:753 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595
__sys_sendmsg net/socket.c:2624 [inline]
__do_sys_sendmsg net/socket.c:2633 [inline]
__se_sys_sendmsg net/socket.c:2631 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2631
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
TIPC bearer-related names including link names must be null-terminated
strings. If a link name which is not null-terminated is passed through
netlink, strstr() and similar functions can cause buffer overrun. This
causes the above issue.
This patch changes the nla_policy for bearer-related names from NLA_STRING
to NLA_NUL_STRING. This resolves the issue by ensuring that only
null-terminated strings are accepted as bearer-related names.
syzbot reported similar uninit-value issue related to bearer names [2]. The
root cause of this issue is that a non-null-terminated bearer name was
passed. This patch also resolved this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt()
KMSAN reported the following uninit-value access issue:
=====================================================
BUG: KMSAN: uninit-value in virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421
virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421
vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703
worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784
kthread+0x3cc/0x520 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
Uninit was stored to memory at:
virtio_transport_space_update net/vmw_vsock/virtio_transport_common.c:1274 [inline]
virtio_transport_recv_pkt+0x1ee8/0x26a0 net/vmw_vsock/virtio_transport_common.c:1415
vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703
worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784
kthread+0x3cc/0x520 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
Uninit was created at:
slab_post_alloc_hook+0x105/0xad0 mm/slab.h:767
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x5a2/0xaf0 mm/slub.c:3523
kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:559
__alloc_skb+0x2fd/0x770 net/core/skbuff.c:650
alloc_skb include/linux/skbuff.h:1286 [inline]
virtio_vsock_alloc_skb include/linux/virtio_vsock.h:66 [inline]
virtio_transport_alloc_skb+0x90/0x11e0 net/vmw_vsock/virtio_transport_common.c:58
virtio_transport_reset_no_sock net/vmw_vsock/virtio_transport_common.c:957 [inline]
virtio_transport_recv_pkt+0x1279/0x26a0 net/vmw_vsock/virtio_transport_common.c:1387
vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703
worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784
kthread+0x3cc/0x520 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
CPU: 1 PID: 10664 Comm: kworker/1:5 Not tainted 6.6.0-rc3-00146-g9f3ebbef746f #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
Workqueue: vsock-loopback vsock_loopback_work
=====================================================
The following simple reproducer can cause the issue described above:
int main(void)
{
int sock;
struct sockaddr_vm addr = {
.svm_family = AF_VSOCK,
.svm_cid = VMADDR_CID_ANY,
.svm_port = 1234,
};
sock = socket(AF_VSOCK, SOCK_STREAM, 0);
connect(sock, (struct sockaddr *)&addr, sizeof(addr));
return 0;
}
This issue occurs because the `buf_alloc` and `fwd_cnt` fields of the
`struct virtio_vsock_hdr` are not initialized when a new skb is allocated
in `virtio_transport_init_hdr()`. This patch resolves the issue by
initializing these fields during allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix disable_otg_wa logic
[Why]
When switching to another HDMI mode, we are unnecesarilly
disabling/enabling FIFO causing both HPO and DIG registers to be set at
the same time when only HPO is supposed to be set.
This can lead to a system hang the next time we change refresh rates as
there are cases when we don't disable OTG/FIFO but FIFO is enabled when
it isn't supposed to be.
[How]
Removing the enable/disable FIFO entirely. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: rk817: Fix node refcount leak
Dan Carpenter reports that the Smatch static checker warning has found
that there is another refcount leak in the probe function. While
of_node_put() was added in one of the return paths, it should in
fact be added for ALL return paths that return an error and at driver
removal time. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: smsc75xx: Fix uninit-value access in __smsc75xx_read_reg
syzbot reported the following uninit-value access issue:
=====================================================
BUG: KMSAN: uninit-value in smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline]
BUG: KMSAN: uninit-value in smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482
CPU: 0 PID: 8696 Comm: kworker/0:3 Not tainted 5.8.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x21c/0x280 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline]
smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482
usbnet_probe+0x1152/0x3f90 drivers/net/usb/usbnet.c:1737
usb_probe_interface+0xece/0x1550 drivers/usb/core/driver.c:374
really_probe+0xf20/0x20b0 drivers/base/dd.c:529
driver_probe_device+0x293/0x390 drivers/base/dd.c:701
__device_attach_driver+0x63f/0x830 drivers/base/dd.c:807
bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431
__device_attach+0x4e2/0x7f0 drivers/base/dd.c:873
device_initial_probe+0x4a/0x60 drivers/base/dd.c:920
bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491
device_add+0x3b0e/0x40d0 drivers/base/core.c:2680
usb_set_configuration+0x380f/0x3f10 drivers/usb/core/message.c:2032
usb_generic_driver_probe+0x138/0x300 drivers/usb/core/generic.c:241
usb_probe_device+0x311/0x490 drivers/usb/core/driver.c:272
really_probe+0xf20/0x20b0 drivers/base/dd.c:529
driver_probe_device+0x293/0x390 drivers/base/dd.c:701
__device_attach_driver+0x63f/0x830 drivers/base/dd.c:807
bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431
__device_attach+0x4e2/0x7f0 drivers/base/dd.c:873
device_initial_probe+0x4a/0x60 drivers/base/dd.c:920
bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491
device_add+0x3b0e/0x40d0 drivers/base/core.c:2680
usb_new_device+0x1bd4/0x2a30 drivers/usb/core/hub.c:2554
hub_port_connect drivers/usb/core/hub.c:5208 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5348 [inline]
port_event drivers/usb/core/hub.c:5494 [inline]
hub_event+0x5e7b/0x8a70 drivers/usb/core/hub.c:5576
process_one_work+0x1688/0x2140 kernel/workqueue.c:2269
worker_thread+0x10bc/0x2730 kernel/workqueue.c:2415
kthread+0x551/0x590 kernel/kthread.c:292
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293
Local variable ----buf.i87@smsc75xx_bind created at:
__smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline]
smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline]
smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482
__smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline]
smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline]
smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482
This issue is caused because usbnet_read_cmd() reads less bytes than requested
(zero byte in the reproducer). In this case, 'buf' is not properly filled.
This patch fixes the issue by returning -ENODATA if usbnet_read_cmd() reads
less bytes than requested. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: pmic_glink_altmode: fix port sanity check
The PMIC GLINK altmode driver currently supports at most two ports.
Fix the incomplete port sanity check on notifications to avoid
accessing and corrupting memory beyond the port array if we ever get a
notification for an unsupported port. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/zswap: fix inconsistency when zswap_store_page() fails
Commit b7c0ccdfbafd ("mm: zswap: support large folios in zswap_store()")
skips charging any zswap entries when it failed to zswap the entire folio.
However, when some base pages are zswapped but it failed to zswap the
entire folio, the zswap operation is rolled back. When freeing zswap
entries for those pages, zswap_entry_free() uncharges the zswap entries
that were not previously charged, causing zswap charging to become
inconsistent.
This inconsistency triggers two warnings with following steps:
# On a machine with 64GiB of RAM and 36GiB of zswap
$ stress-ng --bigheap 2 # wait until the OOM-killer kills stress-ng
$ sudo reboot
The two warnings are:
in mm/memcontrol.c:163, function obj_cgroup_release():
WARN_ON_ONCE(nr_bytes & (PAGE_SIZE - 1));
in mm/page_counter.c:60, function page_counter_cancel():
if (WARN_ONCE(new < 0, "page_counter underflow: %ld nr_pages=%lu\n",
new, nr_pages))
zswap_stored_pages also becomes inconsistent in the same way.
As suggested by Kanchana, increment zswap_stored_pages and charge zswap
entries within zswap_store_page() when it succeeds. This way,
zswap_entry_free() will decrement the counter and uncharge the entries
when it failed to zswap the entire folio.
While this could potentially be optimized by batching objcg charging and
incrementing the counter, let's focus on fixing the bug this time and
leave the optimization for later after some evaluation.
After resolving the inconsistency, the warnings disappear.
[42.hyeyoo@gmail.com: refactor zswap_store_page()] |
| In the Linux kernel, the following vulnerability has been resolved:
inet_diag: fix kernel-infoleak for UDP sockets
KMSAN reported a kernel-infoleak [1], that can exploited
by unpriv users.
After analysis it turned out UDP was not initializing
r->idiag_expires. Other users of inet_sk_diag_fill()
might make the same mistake in the future, so fix this
in inet_sk_diag_fill().
[1]
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:156 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x69d/0x25c0 lib/iov_iter.c:670
instrument_copy_to_user include/linux/instrumented.h:121 [inline]
copyout lib/iov_iter.c:156 [inline]
_copy_to_iter+0x69d/0x25c0 lib/iov_iter.c:670
copy_to_iter include/linux/uio.h:155 [inline]
simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519
__skb_datagram_iter+0x2cb/0x1280 net/core/datagram.c:425
skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533
skb_copy_datagram_msg include/linux/skbuff.h:3657 [inline]
netlink_recvmsg+0x660/0x1c60 net/netlink/af_netlink.c:1974
sock_recvmsg_nosec net/socket.c:944 [inline]
sock_recvmsg net/socket.c:962 [inline]
sock_read_iter+0x5a9/0x630 net/socket.c:1035
call_read_iter include/linux/fs.h:2156 [inline]
new_sync_read fs/read_write.c:400 [inline]
vfs_read+0x1631/0x1980 fs/read_write.c:481
ksys_read+0x28c/0x520 fs/read_write.c:619
__do_sys_read fs/read_write.c:629 [inline]
__se_sys_read fs/read_write.c:627 [inline]
__x64_sys_read+0xdb/0x120 fs/read_write.c:627
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1126 [inline]
netlink_dump+0x3d5/0x16a0 net/netlink/af_netlink.c:2245
__netlink_dump_start+0xd1c/0xee0 net/netlink/af_netlink.c:2370
netlink_dump_start include/linux/netlink.h:254 [inline]
inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1343
sock_diag_rcv_msg+0x24a/0x620
netlink_rcv_skb+0x447/0x800 net/netlink/af_netlink.c:2491
sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:276
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x1095/0x1360 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x16f3/0x1870 net/netlink/af_netlink.c:1916
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
sock_write_iter+0x594/0x690 net/socket.c:1057
do_iter_readv_writev+0xa7f/0xc70
do_iter_write+0x52c/0x1500 fs/read_write.c:851
vfs_writev fs/read_write.c:924 [inline]
do_writev+0x63f/0xe30 fs/read_write.c:967
__do_sys_writev fs/read_write.c:1040 [inline]
__se_sys_writev fs/read_write.c:1037 [inline]
__x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Bytes 68-71 of 312 are uninitialized
Memory access of size 312 starts at ffff88812ab54000
Data copied to user address 0000000020001440
CPU: 1 PID: 6365 Comm: syz-executor801 Not tainted 5.16.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 |
| In the Linux kernel, the following vulnerability has been resolved:
media: mxl111sf: change mutex_init() location
Syzbot reported, that mxl111sf_ctrl_msg() uses uninitialized
mutex. The problem was in wrong mutex_init() location.
Previous mutex_init(&state->msg_lock) call was in ->init() function, but
dvb_usbv2_init() has this order of calls:
dvb_usbv2_init()
dvb_usbv2_adapter_init()
dvb_usbv2_adapter_frontend_init()
props->frontend_attach()
props->init()
Since mxl111sf_* devices call mxl111sf_ctrl_msg() in ->frontend_attach()
internally we need to initialize state->msg_lock before
frontend_attach(). To achieve it, ->probe() call added to all mxl111sf_*
devices, which will simply initiaize mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa_sim: avoid putting an uninitialized iova_domain
The system will crash if we put an uninitialized iova_domain, this
could happen when an error occurs before initializing the iova_domain
in vdpasim_create().
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
RIP: 0010:__cpuhp_state_remove_instance+0x96/0x1c0
...
Call Trace:
<TASK>
put_iova_domain+0x29/0x220
vdpasim_free+0xd1/0x120 [vdpa_sim]
vdpa_release_dev+0x21/0x40 [vdpa]
device_release+0x33/0x90
kobject_release+0x63/0x160
vdpasim_create+0x127/0x2a0 [vdpa_sim]
vdpasim_net_dev_add+0x7d/0xfe [vdpa_sim_net]
vdpa_nl_cmd_dev_add_set_doit+0xe1/0x1a0 [vdpa]
genl_family_rcv_msg_doit+0x112/0x140
genl_rcv_msg+0xdf/0x1d0
...
So we must make sure the iova_domain is already initialized before
put it.
In addition, we may get the following warning in this case:
WARNING: ... drivers/iommu/iova.c:344 iova_cache_put+0x58/0x70
So we must make sure the iova_cache_put() is invoked only if the
iova_cache_get() is already invoked. Let's fix it together. |
| In the Linux kernel, the following vulnerability has been resolved:
devlink: fix netns refcount leak in devlink_nl_cmd_reload()
While preparing my patch series adding netns refcount tracking,
I spotted bugs in devlink_nl_cmd_reload()
Some error paths forgot to release a refcount on a netns.
To fix this, we can reduce the scope of get_net()/put_net()
section around the call to devlink_reload(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: mma8452: Fix trigger reference couting
The mma8452 driver directly assigns a trigger to the struct iio_dev. The
IIO core when done using this trigger will call `iio_trigger_put()` to drop
the reference count by 1.
Without the matching `iio_trigger_get()` in the driver the reference count
can reach 0 too early, the trigger gets freed while still in use and a
use-after-free occurs.
Fix this by getting a reference to the trigger before assigning it to the
IIO device. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mempolicy: do not allow illegal MPOL_F_NUMA_BALANCING | MPOL_LOCAL in mbind()
syzbot reported access to unitialized memory in mbind() [1]
Issue came with commit bda420b98505 ("numa balancing: migrate on fault
among multiple bound nodes")
This commit added a new bit in MPOL_MODE_FLAGS, but only checked valid
combination (MPOL_F_NUMA_BALANCING can only be used with MPOL_BIND) in
do_set_mempolicy()
This patch moves the check in sanitize_mpol_flags() so that it is also
used by mbind()
[1]
BUG: KMSAN: uninit-value in __mpol_equal+0x567/0x590 mm/mempolicy.c:2260
__mpol_equal+0x567/0x590 mm/mempolicy.c:2260
mpol_equal include/linux/mempolicy.h:105 [inline]
vma_merge+0x4a1/0x1e60 mm/mmap.c:1190
mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811
do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333
kernel_mbind mm/mempolicy.c:1483 [inline]
__do_sys_mbind mm/mempolicy.c:1490 [inline]
__se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486
__x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was created at:
slab_alloc_node mm/slub.c:3221 [inline]
slab_alloc mm/slub.c:3230 [inline]
kmem_cache_alloc+0x751/0xff0 mm/slub.c:3235
mpol_new mm/mempolicy.c:293 [inline]
do_mbind+0x912/0x15f0 mm/mempolicy.c:1289
kernel_mbind mm/mempolicy.c:1483 [inline]
__do_sys_mbind mm/mempolicy.c:1490 [inline]
__se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486
__x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
=====================================================
Kernel panic - not syncing: panic_on_kmsan set ...
CPU: 0 PID: 15049 Comm: syz-executor.0 Tainted: G B 5.15.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1ff/0x28e lib/dump_stack.c:106
dump_stack+0x25/0x28 lib/dump_stack.c:113
panic+0x44f/0xdeb kernel/panic.c:232
kmsan_report+0x2ee/0x300 mm/kmsan/report.c:186
__msan_warning+0xd7/0x150 mm/kmsan/instrumentation.c:208
__mpol_equal+0x567/0x590 mm/mempolicy.c:2260
mpol_equal include/linux/mempolicy.h:105 [inline]
vma_merge+0x4a1/0x1e60 mm/mmap.c:1190
mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811
do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333
kernel_mbind mm/mempolicy.c:1483 [inline]
__do_sys_mbind mm/mempolicy.c:1490 [inline]
__se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486
__x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: fix missing sev_decommission in sev_receive_start
DECOMMISSION the current SEV context if binding an ASID fails after
RECEIVE_START. Per AMD's SEV API, RECEIVE_START generates a new guest
context and thus needs to be paired with DECOMMISSION:
The RECEIVE_START command is the only command other than the LAUNCH_START
command that generates a new guest context and guest handle.
The missing DECOMMISSION can result in subsequent SEV launch failures,
as the firmware leaks memory and might not able to allocate more SEV
guest contexts in the future.
Note, LAUNCH_START suffered the same bug, but was previously fixed by
commit 934002cd660b ("KVM: SVM: Call SEV Guest Decommission if ASID
binding fails"). |
| In the Linux kernel, the following vulnerability has been resolved:
enetc: Fix illegal access when reading affinity_hint
irq_set_affinity_hit() stores a reference to the cpumask_t
parameter in the irq descriptor, and that reference can be
accessed later from irq_affinity_hint_proc_show(). Since
the cpu_mask parameter passed to irq_set_affinity_hit() has
only temporary storage (it's on the stack memory), later
accesses to it are illegal. Thus reads from the corresponding
procfs affinity_hint file can result in paging request oops.
The issue is fixed by the get_cpu_mask() helper, which provides
a permanent storage for the cpumask_t parameter. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/mm: Fix lockup on kernel exec fault
The powerpc kernel is not prepared to handle exec faults from kernel.
Especially, the function is_exec_fault() will return 'false' when an
exec fault is taken by kernel, because the check is based on reading
current->thread.regs->trap which contains the trap from user.
For instance, when provoking a LKDTM EXEC_USERSPACE test,
current->thread.regs->trap is set to SYSCALL trap (0xc00), and
the fault taken by the kernel is not seen as an exec fault by
set_access_flags_filter().
Commit d7df2443cd5f ("powerpc/mm: Fix spurious segfaults on radix
with autonuma") made it clear and handled it properly. But later on
commit d3ca587404b3 ("powerpc/mm: Fix reporting of kernel execute
faults") removed that handling, introducing test based on error_code.
And here is the problem, because on the 603 all upper bits of SRR1
get cleared when the TLB instruction miss handler bails out to ISI.
Until commit cbd7e6ca0210 ("powerpc/fault: Avoid heavy
search_exception_tables() verification"), an exec fault from kernel
at a userspace address was indirectly caught by the lack of entry for
that address in the exception tables. But after that commit the
kernel mainly relies on KUAP or on core mm handling to catch wrong
user accesses. Here the access is not wrong, so mm handles it.
It is a minor fault because PAGE_EXEC is not set,
set_access_flags_filter() should set PAGE_EXEC and voila.
But as is_exec_fault() returns false as explained in the beginning,
set_access_flags_filter() bails out without setting PAGE_EXEC flag,
which leads to a forever minor exec fault.
As the kernel is not prepared to handle such exec faults, the thing to
do is to fire in bad_kernel_fault() for any exec fault taken by the
kernel, as it was prior to commit d3ca587404b3. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix uninit-value in caif_seqpkt_sendmsg
When nr_segs equal to zero in iovec_from_user, the object
msg->msg_iter.iov is uninit stack memory in caif_seqpkt_sendmsg
which is defined in ___sys_sendmsg. So we cann't just judge
msg->msg_iter.iov->base directlly. We can use nr_segs to judge
msg in caif_seqpkt_sendmsg whether has data buffers.
=====================================================
BUG: KMSAN: uninit-value in caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x220 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg net/socket.c:672 [inline]
____sys_sendmsg+0x12b6/0x1350 net/socket.c:2343
___sys_sendmsg net/socket.c:2397 [inline]
__sys_sendmmsg+0x808/0xc90 net/socket.c:2480
__compat_sys_sendmmsg net/compat.c:656 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Ensure liveliness of nested VM-Enter fail tracepoint message
Use the __string() machinery provided by the tracing subystem to make a
copy of the string literals consumed by the "nested VM-Enter failed"
tracepoint. A complete copy is necessary to ensure that the tracepoint
can't outlive the data/memory it consumes and deference stale memory.
Because the tracepoint itself is defined by kvm, if kvm-intel and/or
kvm-amd are built as modules, the memory holding the string literals
defined by the vendor modules will be freed when the module is unloaded,
whereas the tracepoint and its data in the ring buffer will live until
kvm is unloaded (or "indefinitely" if kvm is built-in).
This bug has existed since the tracepoint was added, but was recently
exposed by a new check in tracing to detect exactly this type of bug.
fmt: '%s%s
' current_buffer: ' vmx_dirty_log_t-140127 [003] .... kvm_nested_vmenter_failed: '
WARNING: CPU: 3 PID: 140134 at kernel/trace/trace.c:3759 trace_check_vprintf+0x3be/0x3e0
CPU: 3 PID: 140134 Comm: less Not tainted 5.13.0-rc1-ce2e73ce600a-req #184
Hardware name: ASUS Q87M-E/Q87M-E, BIOS 1102 03/03/2014
RIP: 0010:trace_check_vprintf+0x3be/0x3e0
Code: <0f> 0b 44 8b 4c 24 1c e9 a9 fe ff ff c6 44 02 ff 00 49 8b 97 b0 20
RSP: 0018:ffffa895cc37bcb0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffa895cc37bd08 RCX: 0000000000000027
RDX: 0000000000000027 RSI: 00000000ffffdfff RDI: ffff9766cfad74f8
RBP: ffffffffc0a041d4 R08: ffff9766cfad74f0 R09: ffffa895cc37bad8
R10: 0000000000000001 R11: 0000000000000001 R12: ffffffffc0a041d4
R13: ffffffffc0f4dba8 R14: 0000000000000000 R15: ffff976409f2c000
FS: 00007f92fa200740(0000) GS:ffff9766cfac0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000559bd11b0000 CR3: 000000019fbaa002 CR4: 00000000001726e0
Call Trace:
trace_event_printf+0x5e/0x80
trace_raw_output_kvm_nested_vmenter_failed+0x3a/0x60 [kvm]
print_trace_line+0x1dd/0x4e0
s_show+0x45/0x150
seq_read_iter+0x2d5/0x4c0
seq_read+0x106/0x150
vfs_read+0x98/0x180
ksys_read+0x5f/0xe0
do_syscall_64+0x40/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae |
