iio: gyro: mpu3050: Fix incorrect free_irq() variable

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: mpu3050: Fix incorrect free_irq() variable The handler for the IRQ part of this driver is mpu3050->trig but, in the teardown free_irq() is called with handler mpu3050. Use correct IRQ handler when calling free_irq().

iio: imu: st_lsm6dsx: Set buffer sampling frequency for accelerometer only

In the Linux kernel, the following vulnerability has been resolved: iio: imu: st_lsm6dsx: Set buffer sampling frequency for accelerometer only The st_lsm6dsx_hwfifo_odr_store() function, which is called when userspace writes the buffer sampling frequency sysfs attribute, calls st_lsm6dsx_check_odr(), which accesses the odr_table array at index `sensor->id`; since this array is only 2 entries long, an access for any sensor type other than accelerometer or gyroscope is an out-of-bounds access. The motivation for being able to set a buffer frequency different from the sensor sampling frequency is to support use cases that need accurate event detection (which requires a high sampling frequency) while retrieving sensor data at low frequency. Since all the supported event types are generated from acceleration data only, do not create the buffer sampling frequency attribute for sensor types other than the accelerometer.

Incus OVN TLS verification accepts peer-supplied roots and permits endpoint impersonation

Incus is a system container and virtual machine manager. In versions before 7.0.0, broken TLS validation logic in the OVN database connection logic can allow connections to an attacker's OVN database. The OVN client implementations disable Go standard TLS server verification and replace it with custom peer-certificate verification logic. That replacement verifier does not anchor trust in the configured CA certificate. Instead, it constructs the verification root set from certificates supplied by the peer during the handshake, so the configured CA is parsed but not used as the trust anchor for the final verification decision. In OVN-enabled deployments that use these SSL database connection paths, an attacker able to impersonate or intercept the OVN endpoint on the management network can present a rogue self-signed certificate chain, and Incus will accept this certificate as valid. This issue defeats the intended CA-based trust model for OVN database connections and permits endpoint impersonation by an active attacker in a suitable network position. This issue is fixed in version 7.0.0.

PhpSpreadsheet SSRF and RCE via PHP stream wrappers in IOFactory::load

PhpSpreadsheet is a library for reading and writing spreadsheet files. In versions 1.30.2 and earlier, 2.0.0 through 2.1.14, 2.2.0 through 2.4.3, 3.3.0 through 3.10.3, and 4.0.0 through 5.5.0, when the filename argument to IOFactory::load() is user-controlled, an attacker can supply a PHP stream wrapper path (such as phar://, ftp://, or ssh2.sftp://) that passes the is_file() check in File::assertFile(). The phar:// wrapper triggers deserialization of the PHAR metadata, which can lead to remote code execution if a suitable gadget chain is available in the application. The ftp:// and ssh2.sftp:// wrappers can be used for server-side request forgery. This issue has been fixed in versions 1.30.3, 2.1.15, 2.4.4, 3.10.4, and 5.6.0.

PhpSpreadsheet XSS via number format text substitution in HTML Writer

PhpSpreadsheet is a library for reading and writing spreadsheet files. In versions 1.30.3 and earlier, 2.0.0 through 2.1.15, 2.2.0 through 2.4.4, 3.3.0 through 3.10.4, and 4.0.0 through 5.6.0, the HTML Writer skips htmlspecialchars() output escaping when a cell uses a custom number format containing the @ text placeholder with additional literal text (e.g., @ "items"). The escaping is only applied when the formatted output strictly equals the original cell value. When the format code contains @ with quoted literal text, the formatter substitutes the raw cell value into the format string and returns early without invoking the escaping callback. An attacker who can control cell content in a spreadsheet processed by the HTML Writer can inject arbitrary HTML and JavaScript into the generated output. This issue has been fixed in versions 1.30.4, 2.1.16, 2.4.5, 3.10.5, and 5.7.0.

ERPNext v15.103.1 and before is vulnerable to Server-Side Template Injection (SSTI). An attacker with permission to create or edit email templates can inject template expressions that are executed on the server when the template is rendered.

Unsafe array index getter in mathjs

Math.js is an extensive math library for JavaScript and Node.js. From version 13.1.0 to before version 15.2.0, arbitrary JavaScript can be executed via the expression parser of mathjs. This issue has been patched in version 15.2.0.

ERPNext v15.103.1 and before is vulnerable to Cross Site Scripting (XSS) in the Email Template engine. An attacker with permission to create or edit email templates can inject malicious JavaScript code that are executed on the victim's browser when the template is applied.

Istio Vulnerable to SSRF via RequestAuthentication jwksUri

Istio is an open platform to connect, manage, and secure microservices. Prior to versions 1.28.6 and 1.29.2, when a RequestAuthentication resource is created with a jwksUri pointing to an internal service, istiod makes an unauthenticated HTTP GET request to that URL without filtering out localhost or link local ips. This can result in sensitive data being distributed to Envoy proxies via xDS configuration. This issue has been patched in versions 1.28.6 and 1.29.2.

OpenEXR: Shift exponent overflow in `readVariableLengthInteger()` (`ImfIDManifest.cpp`)

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, readVariableLengthInteger() decodes a variable-length integer from untrusted EXR input without bounding the shift count. After enough continuation bytes, the code executes a left shift by 70 on a 64-bit value, which is undefined behavior. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11.

OpenEXR is Vulnerable to Integer overflow in ImageChannel::resize leads to heap OOB write via OpenEXRUtil public API

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, there is an integer overflow in ImageChannel::resize that leads to heap OOB write via OpenEXRUtil public API. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11.

OS command injection vulneravility in the management gui (maintenance utility) of Hitachi Virtual Storage Platform One Block 23/24/26/28

OS command injection vulneravility in the management gui (maintenance utility) of Hitachi Virtual Storage Platform One Block 23, 24, 26 and 28. This issue affects Hitachi Virtual Storage Platform One Block 23/24/26/28: before DKCMAIN A3-04-21-40/00, ESM A3-04-21/00.

DLL Hijacking Vulnerability in ZTE Cloud PC Client uSmartview

ZTE Cloud PC client uSmartView contains a DLL hijacking vulnerability; since uSmartViewServiceAgent.exe runs with SYSTEM privileges, successful hijacking enables local arbitrary code execution, privilege escalation, and memory corruption.contains a DLL hijacking vulnerability; since uSmartViewServiceAgent.exe runs with SYSTEM privileges, successful hijacking enables local arbitrary code execution, privilege escalation, and memory corruption.

OpenEXR: Out-of-bounds read in `IDManifest::init()` during prefix expansion

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, IDManifest::init() reconstructs strings from a prefix-compressed representation. If the previous string is longer than 255 bytes, the next string is expected to begin with a 2-byte prefix length. The code reads stringList[i][0] and stringList[i][1] without checking that the current string has at least two bytes. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11.

Heap Buffer Overflow in AgileEngine

Out-of-bounds write vulnerability in The Document Foundation LibreOffice via crafted OOXML documents with mismatched encryption salt parameters. This issue affects LibreOffice: from 26.2 before 26.2.3, from 25.8 before 25.8.7.

CoreDNS DNS-over-QUIC unbounded goroutine growth leads to denial of service

CoreDNS is a DNS server that chains plugins. In versions prior to 1.14.3, the DNS-over-QUIC (DoQ) server can be driven into unbounded goroutine and memory growth by a remote client that opens many QUIC streams and sends only 1 byte per stream. When the worker pool is full, CoreDNS still spawns a goroutine per accepted stream to wait for a worker token. Additionally, active workers block indefinitely in io.ReadFull() with no per-stream read deadline, allowing an attacker to pin all workers by sending a single byte so the read blocks waiting for the second byte of the DoQ length prefix. This enables an unauthenticated remote attacker to cause memory exhaustion and OOM-kill. This issue has been fixed in version 1.14.3. No known workarounds exist.

CoreDNS DoH GET path missing size validation causes CPU and memory amplification

CoreDNS is a DNS server that chains plugins. In versions prior to 1.14.3, the DNS-over-HTTPS (DoH) GET path accepts oversized dns= query parameter values and performs URL query parsing, base64 decoding, and DNS message unpacking before rejecting the request. Unlike the POST path, which applies a bounded read via http.MaxBytesReader limited to 65536 bytes, the GET path has no equivalent size validation before expensive processing. A remote, unauthenticated attacker can repeatedly send oversized DoH GET requests to force high CPU usage, large transient memory allocations, and elevated garbage-collection pressure, leading to denial of service. This issue has been fixed in version 1.14.3.

CoreDNS TSIG authentication bypass on encrypted DNS transports

CoreDNS is a DNS server that chains plugins. In versions prior to 1.14.3, the tsig plugin can be bypassed on non-plain-DNS transports (DoT, DoH, DoH3, DoQ, and gRPC) because it trusts the transport writer's TsigStatus() instead of performing verification itself. The DoH and DoH3 writer's TsigStatus() always returns nil, the DoT server does not set TsigSecret on the dns.Server, and the DoQ and gRPC writers also unconditionally return nil. This allows an unauthenticated remote client to bypass TSIG-based authentication and access resources intended to be restricted behind a tsig require all policy. Plain DNS over TCP and UDP are not affected. This issue has been fixed in version 1.14.3.

media: mtk-mdp: Fix error handling in probe function

In the Linux kernel, the following vulnerability has been resolved: media: mtk-mdp: Fix error handling in probe function Add mtk_mdp_unregister_m2m_device() on the error handling path to prevent resource leak. Add check for the return value of vpu_get_plat_device() to prevent null pointer dereference. And vpu_get_plat_device() increases the reference count of the returned platform device. Add platform_device_put() to prevent reference leak.

CoreDNS transfer plugin subzone ACL bypass via lexicographic zone comparison

CoreDNS is a DNS server that chains plugins. In versions prior to 1.14.3, the transfer plugin can select the wrong ACL stanza when both a parent zone and a more-specific subzone are configured. The longestMatch() function in plugin/transfer/transfer.go uses a lexicographic string comparison instead of an actual longest-suffix match to select the winning zone. As a result, a permissive parent-zone transfer rule can override a restrictive subzone rule depending on zone name ordering (e.g., "example.org." > "a.example.org." lexicographically). This allows an unauthorized remote client to perform AXFR/IXFR for the subzone and retrieve its full zone contents. This issue has been fixed in version 1.14.3.