| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Allow CPU to reschedule while setting per-page memory attributes
When running an SEV-SNP guest with a sufficiently large amount of memory (1TB+),
the host can experience CPU soft lockups when running an operation in
kvm_vm_set_mem_attributes() to set memory attributes on the whole
range of guest memory.
watchdog: BUG: soft lockup - CPU#8 stuck for 26s! [qemu-kvm:6372]
CPU: 8 UID: 0 PID: 6372 Comm: qemu-kvm Kdump: loaded Not tainted 6.15.0-rc7.20250520.el9uek.rc1.x86_64 #1 PREEMPT(voluntary)
Hardware name: Oracle Corporation ORACLE SERVER E4-2c/Asm,MB Tray,2U,E4-2c, BIOS 78016600 11/13/2024
RIP: 0010:xas_create+0x78/0x1f0
Code: 00 00 00 41 80 fc 01 0f 84 82 00 00 00 ba 06 00 00 00 bd 06 00 00 00 49 8b 45 08 4d 8d 65 08 41 39 d6 73 20 83 ed 06 48 85 c0 <74> 67 48 89 c2 83 e2 03 48 83 fa 02 75 0c 48 3d 00 10 00 00 0f 87
RSP: 0018:ffffad890a34b940 EFLAGS: 00000286
RAX: ffff96f30b261daa RBX: ffffad890a34b9c8 RCX: 0000000000000000
RDX: 000000000000001e RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000018 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffad890a356868
R13: ffffad890a356860 R14: 0000000000000000 R15: ffffad890a356868
FS: 00007f5578a2a400(0000) GS:ffff97ed317e1000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f015c70fb18 CR3: 00000001109fd006 CR4: 0000000000f70ef0
PKRU: 55555554
Call Trace:
<TASK>
xas_store+0x58/0x630
__xa_store+0xa5/0x130
xa_store+0x2c/0x50
kvm_vm_set_mem_attributes+0x343/0x710 [kvm]
kvm_vm_ioctl+0x796/0xab0 [kvm]
__x64_sys_ioctl+0xa3/0xd0
do_syscall_64+0x8c/0x7a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f5578d031bb
Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2d 4c 0f 00 f7 d8 64 89 01 48
RSP: 002b:00007ffe0a742b88 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 000000004020aed2 RCX: 00007f5578d031bb
RDX: 00007ffe0a742c80 RSI: 000000004020aed2 RDI: 000000000000000b
RBP: 0000010000000000 R08: 0000010000000000 R09: 0000017680000000
R10: 0000000000000080 R11: 0000000000000246 R12: 00005575e5f95120
R13: 00007ffe0a742c80 R14: 0000000000000008 R15: 00005575e5f961e0
While looping through the range of memory setting the attributes,
call cond_resched() to give the scheduler a chance to run a higher
priority task on the runqueue if necessary and avoid staying in
kernel mode long enough to trigger the lockup. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: discard erroneous disassoc frames on STA interface
When operating in concurrent STA/AP mode with host MLME enabled,
the firmware incorrectly sends disassociation frames to the STA
interface when clients disconnect from the AP interface.
This causes kernel warnings as the STA interface processes
disconnect events that don't apply to it:
[ 1303.240540] WARNING: CPU: 0 PID: 513 at net/wireless/mlme.c:141 cfg80211_process_disassoc+0x78/0xec [cfg80211]
[ 1303.250861] Modules linked in: 8021q garp stp mrp llc rfcomm bnep btnxpuart nls_iso8859_1 nls_cp437 onboard_us
[ 1303.327651] CPU: 0 UID: 0 PID: 513 Comm: kworker/u9:2 Not tainted 6.16.0-rc1+ #3 PREEMPT
[ 1303.335937] Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT)
[ 1303.343588] Workqueue: MWIFIEX_RX_WORK_QUEUE mwifiex_rx_work_queue [mwifiex]
[ 1303.350856] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1303.357904] pc : cfg80211_process_disassoc+0x78/0xec [cfg80211]
[ 1303.364065] lr : cfg80211_process_disassoc+0x70/0xec [cfg80211]
[ 1303.370221] sp : ffff800083053be0
[ 1303.373590] x29: ffff800083053be0 x28: 0000000000000000 x27: 0000000000000000
[ 1303.380855] x26: 0000000000000000 x25: 00000000ffffffff x24: ffff000002c5b8ae
[ 1303.388120] x23: ffff000002c5b884 x22: 0000000000000001 x21: 0000000000000008
[ 1303.395382] x20: ffff000002c5b8ae x19: ffff0000064dd408 x18: 0000000000000006
[ 1303.402646] x17: 3a36333a61623a30 x16: 32206d6f72662063 x15: ffff800080bfe048
[ 1303.409910] x14: ffff000003625300 x13: 0000000000000001 x12: 0000000000000000
[ 1303.417173] x11: 0000000000000002 x10: ffff000003958600 x9 : ffff000003625300
[ 1303.424434] x8 : ffff00003fd9ef40 x7 : ffff0000039fc280 x6 : 0000000000000002
[ 1303.431695] x5 : ffff0000038976d4 x4 : 0000000000000000 x3 : 0000000000003186
[ 1303.438956] x2 : 000000004836ba20 x1 : 0000000000006986 x0 : 00000000d00479de
[ 1303.446221] Call trace:
[ 1303.448722] cfg80211_process_disassoc+0x78/0xec [cfg80211] (P)
[ 1303.454894] cfg80211_rx_mlme_mgmt+0x64/0xf8 [cfg80211]
[ 1303.460362] mwifiex_process_mgmt_packet+0x1ec/0x460 [mwifiex]
[ 1303.466380] mwifiex_process_sta_rx_packet+0x1bc/0x2a0 [mwifiex]
[ 1303.472573] mwifiex_handle_rx_packet+0xb4/0x13c [mwifiex]
[ 1303.478243] mwifiex_rx_work_queue+0x158/0x198 [mwifiex]
[ 1303.483734] process_one_work+0x14c/0x28c
[ 1303.487845] worker_thread+0x2cc/0x3d4
[ 1303.491680] kthread+0x12c/0x208
[ 1303.495014] ret_from_fork+0x10/0x20
Add validation in the STA receive path to verify that disassoc/deauth
frames originate from the connected AP. Frames that fail this check
are discarded early, preventing them from reaching the MLME layer and
triggering WARN_ON().
This filtering logic is similar with that used in the
ieee80211_rx_mgmt_disassoc() function in mac80211, which drops
disassoc frames that don't match the current BSSID
(!ether_addr_equal(mgmt->bssid, sdata->vif.cfg.ap_addr)), ensuring
only relevant frames are processed.
Tested on:
- 8997 with FW 16.68.1.p197 |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/zcrx: fix pp destruction warnings
With multiple page pools and in some other cases we can have allocated
niovs on page pool destruction. Remove a misplaced warning checking that
all niovs are returned to zcrx on io_pp_zc_destroy(). It was reported
before but apparently got lost. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test
This fixes the tx timeout issue seen while running a stress test on
btnxpuart for couple of hours, such that the interval between two HCI
commands coincide with the power save timeout value of 2 seconds.
Test procedure using bash script:
<load btnxpuart.ko>
hciconfig hci0 up
//Enable Power Save feature
hcitool -i hci0 cmd 3f 23 02 00 00
while (true)
do
hciconfig hci0 leadv
sleep 2
hciconfig hci0 noleadv
sleep 2
done
Error log, after adding few more debug prints:
Bluetooth: btnxpuart_queue_skb(): 01 0A 20 01 00
Bluetooth: hci0: Set UART break: on, status=0
Bluetooth: hci0: btnxpuart_tx_wakeup() tx_work scheduled
Bluetooth: hci0: btnxpuart_tx_work() dequeue: 01 0A 20 01 00
Can't set advertise mode on hci0: Connection timed out (110)
Bluetooth: hci0: command 0x200a tx timeout
When the power save mechanism turns on UART break, and btnxpuart_tx_work()
is scheduled simultaneously, psdata->ps_state is read as PS_STATE_AWAKE,
which prevents the psdata->work from being scheduled, which is responsible
to turn OFF UART break.
This issue is fixed by adding a ps_lock mutex around UART break on/off as
well as around ps_state read/write.
btnxpuart_tx_wakeup() will now read updated ps_state value. If ps_state is
PS_STATE_SLEEP, it will first schedule psdata->work, and then it will
reschedule itself once UART break has been turned off and ps_state is
PS_STATE_AWAKE.
Tested above script for 50,000 iterations and TX timeout error was not
observed anymore. |
| A vulnerability in Cisco Catalyst Center could allow an authenticated, remote attacker to execute operations that should require Administrator privileges. The attacker would need valid read-only user credentials.
This vulnerability is due to improper role-based access control (RBAC). An attacker could exploit this vulnerability by logging in to an affected system and modifying certain policy configurations. A successful exploit could allow the attacker to modify policy configurations that are reserved for the Administrator role. To exploit this vulnerability, the attacker must have valid credentials for a user account with at least the role of Observer. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: eir: Fix using strlen with hdev->{dev_name,short_name}
Both dev_name and short_name are not guaranteed to be NULL terminated so
this instead use strnlen and then attempt to determine if the resulting
string needs to be truncated or not. |
| A vulnerability in the REST API of Cisco Catalyst Center could allow an authenticated, remote attacker to execute arbitrary commands in a restricted container as the root user.
This vulnerability is due to insufficient validation of user-supplied input in REST API request parameters. An attacker could exploit this vulnerability by sending a crafted API request to an affected device. A successful exploit could allow the attacker to inject arbitrary commands that would then be executed in a restricted container with root privileges. To exploit this vulnerability, the attacker must have valid credentials for a user account with at least the role of Observer. |
| oasys v1.1 is vulnerable to Directory Traversal in ProcedureController. |
| SQL injection vulnerability in oa_system oasys v.1.1 allows a remote attacker to execute arbitrary code via the alph parameters in src/main/Java/cn/gson/oasys/controller/address/AddrController |
| SQL injection vulnerability in oa_system oasys v.1.1 allows a remote attacker to execute arbitrary code via the allDirector() method declaration in src/main/java/cn/gson/oasys/mappers/AddressMapper.java |
| A vulnerability in the web-based management interface of Cisco Catalyst Center could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface of an affected device.
This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by persuading a user of the web-based management interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. |
| A post-authentication command injection vulnerability in the "priv" parameter of Zyxel DX3300-T0 firmware version 5.50(ABVY.6.3)C0 and earlier could allow an authenticated attacker to execute operating system (OS) commands on an affected device. |
| Observable Timing Discrepancy (CWE-208) in HBUS devices may allow an attacker with physical access to the device to extract device-specific keys, potentially compromising further site security.
This issue affects Command Centre Server:
9.30 prior to vCR9.30.251028a (distributed in 9.30.2881 (MR3)), 9.20 prior to vCR9.20.251028a (distributed in 9.20.3265 (MR5)), 9.10 prior to vCR9.10.251028a (distributed in 9.10.4135 (MR8)), all versions of 9.00 and prior. |
| Incorrect Usage of Seeds in Pseudo-Random Number Generator (CWE- 335) vulnerability in the High Sec ELM may allow a sophisticated attacker with physical access, to compromise internal device communications.
This issue affects Command Centre Server:
9.30 prior to vCR9.30.251028a (distributed in 9.30.2881 (MR3)), 9.20 prior to vCR9.20.251028a (distributed in 9.20.3265 (MR5)), 9.10 prior to vCR9.10.251028a (distributed in 9.10.4135 (MR8)), all versions of 9.00 and prior. |
| Missing Release of Resource after Effective Lifetime (CWE-772) in the T21 Reader allows an attacker with physical access to the Reader to perform a denial-of-service attack against that specific reader, preventing cardholders from badging for entry.
This issue affects Command Centre Server:
9.30 prior to vCR9.30.251028a (distributed in 9.30.2881 (MR3)), 9.20 prior to vCR9.20.251028a (distributed in 9.20.3265 (MR5)), 9.10 prior to vCR9.10.251028a (distributed in 9.10.4135 (MR8)), all versions of 9.00 and prior. |
| The Gravity Forms plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the legacy chunked upload mechanism in all versions up to, and including, 2.9.21.1. This is due to the extension blacklist not including .phar files, which can be uploaded through the chunked upload mechanism. This makes it possible for unauthenticated attackers to upload executable .phar files and achieve remote code execution on the server, granted they can discover or enumerate the upload path. In order for an attacker to achieve RCE, the web server needs to be set up to process .phar file as PHP via file handler mapping or similar. |
| The VK All in One Expansion Unit plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the '_veu_custom_css' parameter in all versions up to, and including, 9.112.1. This is due to insufficient input sanitization and output escaping on the user-supplied Custom CSS value. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that execute whenever a user accesses an injected page. |
| IBM Db2 10.5.0 through 10.5.11, 11.1.0 through 11.1.4.7, 11.5.0 through 11.5.9, and 12.1.0 through 12.1.3 for Linux, UNIX and Windows (includes Db2 Connect Server) is vulnerable to a denial of service as the server may crash under certain conditions with a specially crafted query. |
| The VK All in One Expansion Unit plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'vkExUnit_cta_url' and 'vkExUnit_cta_button_text' parameters in all versions up to, and including, 9.112.1. This is due to a logic error in the CTA save function that reads sanitization callbacks from the wrong variable ($custom_field_name instead of $custom_field_options), causing the sanitization to never be applied. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that execute when a user accesses an injected page.", |
| Stack buffer overflow vulnerability exists in the Supermicro BMC Shared library. An authenticated attacker with access to the BMC exploit stack buffer via a crafted header and achieve arbitrary code execution of the BMC’s firmware operating system. |
