| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dm-io: report non-retryable errors separatedly
The error codes BLK_STS_NOTSUPP and BLK_STS_INVAL should not cause leg
failure on dm-raid1. This patch changes the interface to dm-io, so that
it reports two error bitmaps - error_bits and unsup_bits. The unsup_bit
bitmap tracks BLK_STS_NOTSUPP or BLK_STS_INVAL errors, the error_bits
bitmap tracks all the other errors.
dm-raid1 is changed so that it won't fail a leg if it receives an error
in the unsup_bits bitmap.
This patch (with 62dc37a819a5) fixes misbehavior if the user uses
unaligned bio vectors on dm-raid1. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition
In dwc3_gadget_init_endpoint, &dep->nostream_work is bound with
dwc3_nostream_work, and dwc3_gadget_endpoint_stream_event can queue
this delayed work on system_percpu_wq when a DEPEVT_STREAM_NOSTREAM
event is received.
If we remove the gadget, dwc3_gadget_free_endpoints makes cleanup and
the memory allocated for dep with kzalloc() is released by kfree(dep),
while the delayed work mentioned above may still be pending or
running. The sequence of operations that may lead to a UAF bug is as
follows:
CPU0 CPU1
| dwc3_thread_interrupt
| dwc3_endpoint_interrupt
| dwc3_gadget_endpoint_stream_event
| queue_delayed_work(system_percpu_wq,
| &dep->nostream_work)
dwc3_gadget_free_endpoints |
dwc3_free_trb_pool(dep) |
list_del(&dep->endpoint.ep_list) |
dwc3_debugfs_remove_endpoint_dir(dep) |
kfree(dep) |
// dep is freed |
| dwc3_nostream_work
| // use dep (use-after-free)
Fix it by canceling the delayed work before kfree(dep) in
dwc3_gadget_free_endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: purge outqueue on stale COOKIE-ECHO handling
sctp_stream_update() is only invoked when the association is moved into
COOKIE_WAIT during association setup/reconfiguration. In this path, the
outbound stream scheduler state (stream->out_curr) is expected to be
clean, since no user data should have been transmitted yet unless the
state machine has already partially progressed.
However, a corner case exists in sctp_sf_do_5_2_6_stale(): when a
Stale Cookie ERROR is received, the association is rolled back from
COOKIE_ECHOED to COOKIE_WAIT. In this scenario, user data may already
have been queued and even bundled with the COOKIE-ECHO chunk.
During the rollback, sctp_stream_update() frees the old stream table
and installs a new one, but it does not invalidate stream->out_curr.
As a result, out_curr may still point to a freed sctp_stream_out
entry from the previous stream state.
Later, SCTP scheduler dequeue paths (FCFS, RR, PRIO, etc.) rely on
stream->out_curr->ext, which can lead to use-after-free once the old
stream state has been released via sctp_stream_free().
This results in crashes such as (reported by Yuqi):
BUG: KASAN: slab-use-after-free in sctp_sched_fcfs_dequeue+0x13a/0x140
Read of size 8 at addr ff1100004d4d3208 by task mini_poc/9312
CPU: 1 UID: 1001 PID: 9312 Comm: mini_poc Not tainted
7.1.0-rc1-00305-gbd3a4795d574 #5 PREEMPT(full)
sctp_sched_fcfs_dequeue+0x13a/0x140
sctp_outq_flush+0x1603/0x33e0
sctp_do_sm+0x31c9/0x5d30
sctp_assoc_bh_rcv+0x392/0x6f0
sctp_inq_push+0x1db/0x270
sctp_rcv+0x138d/0x3c10
Fix this by fully purging the association outqueue when handling the
Stale Cookie case. This ensures all pending transmit and retransmit
state is dropped, and any scheduler cached pointers are invalidated,
making it safe to rebuild stream state during COOKIE_WAIT restart.
Updating only stream->out_curr would be insufficient, since queued
and retransmittable data would still reference the old stream state and
trigger later use-after-free in dequeue paths. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation
Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload
of guest state") made KVM always use vmcb01 for the fields controlled by
VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code
to always use vmcb01.
As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not
intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01
instead of the current VMCB. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Force requesting ACS when tboot is enabled
Currently the conditions of requesting ACS in detect_intel_iommu()
don't include tboot, leading to a possible misconfiguration with ACS
disabled (e.g. due to user opts) while iommu is later forced on by
tboot_force_iommu().
Fix it by checking tboot in detect_intel_iommu(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: handle zerocopy send cleanup before the message is queued
A zerocopy send can fail after user pages have been pinned but before
the message is attached to the sending socket.
The purge path currently infers zerocopy state from rm->m_rs, so an
unqueued message can be cleaned up as if it owned normal payload pages.
However, zerocopy ownership is really determined by the presence of
op_mmp_znotifier, regardless of whether the message has reached the
socket queue.
Capture op_mmp_znotifier up front in rds_message_purge() and use it as
the cleanup discriminator. If the message is already associated with a
socket, keep the existing completion path. Otherwise, drop the pinned
page accounting directly and release the notifier before putting the
payload pages.
This keeps early send failure cleanup consistent with the zerocopy
lifetime rules without changing the normal queued completion path. |
| Tesseract OCR 5.0.0-alpha-20201231 has a one_ell_conflict use-after-free during a strpbrk call. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: si: Fix NULL pointer dereference after failed registration
try_smi_init() allocates new_smi->si_sm and later calls
ipmi_register_smi_mod(), which maps to ipmi_add_smi().
During ipmi_add_smi(), the upper IPMI message handler obtains the
initial BMC device information through __bmc_get_device_id(). This can
fail if the BMC does not return a successful response to the Get Device
ID command.
When the BMC returns a nonzero completion code, the device-id helper
retries the command and eventually returns -EIO if the device ID still
cannot be fetched.
On this failure path, ipmi_add_smi() logs "Unable to get the device id"
and goes to out_err_started, where it invokes the lower driver's
shutdown callback. try_smi_init() then logs the returned registration
failure:
ipmi_si IPI0001:00: IPMI message handler: Unable to get the device id: -5
ipmi_si IPI0001:00: Unable to register device: error -5
For ipmi_si, the shutdown callback is shutdown_smi(), which cleans up
the SI state machine data, frees smi_info->si_sm, and sets
smi_info->si_sm and smi_info->intf to NULL.
However, intf->in_shutdown is not set on this failed-registration
rollback path. Therefore, the asynchronous redo_bmc_reg work item can
still retry BMC device-id probing after the lower driver has already
cleared its SI state machine data. In the observed case, that retry path
reached start_next_msg(), which passed the NULL smi_info->si_sm pointer
to the selected KCS state machine handler:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
Workqueue: events redo_bmc_reg [ipmi_msghandler]
RIP: start_kcs_transaction+0x2c/0x190 [ipmi_si]
Call Trace:
start_next_msg+0x50/0x80 [ipmi_si]
check_start_timer_thread.part.9+0x3b/0x50 [ipmi_si]
sender+0x69/0x80 [ipmi_si]
i_ipmi_request+0x2ac/0x9d0 [ipmi_msghandler]
__get_device_id.isra.29+0xaa/0x180 [ipmi_msghandler]
__bmc_get_device_id+0xef/0x950 [ipmi_msghandler]
redo_bmc_reg+0x52/0x60 [ipmi_msghandler]
process_one_work+0x1a7/0x360
Set intf->in_shutdown on the out_err_started path before invoking the
lower driver's shutdown callback. This prevents later redo_bmc_reg
retries from using an interface whose lower driver state has been
cleaned up, and applies the same shutdown state to other IPMI interfaces
as well. |
| In the Linux kernel, the following vulnerability has been resolved:
net: pull headers in qdisc_pkt_len_segs_init()
Most ndo_start_xmit() methods expects headers of gso packets
to be already in skb->head.
net/core/tso.c users are particularly at risk, because tso_build_hdr()
does a memcpy(hdr, skb->data, hdr_len);
qdisc_pkt_len_segs_init() already does a dissection of gso packets.
Use pskb_may_pull() instead of skb_header_pointer() to make
sure drivers do not have to reimplement this.
Some malicious packets could be fed, detect them so that we can
drop them sooner with a new SKB_DROP_REASON_SKB_BAD_GSO drop_reason. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: keyspan_pda: fix information leak
The write() callback is supposed to return the number of characters
accepted or a negative errno. Since the addition of write fifo support
the keyspan_pda implementation will however return the number characters
submitted to the device if the write urb is not already in use. If this
number is larger than the number of characters passed to write(), the
line discipline continues writing data from beyond the tty write buffer.
Fix the information leak by making sure that keyspan_pda_write_start()
returns zero on success as intended. |
| In the Linux kernel, the following vulnerability has been resolved:
timers/itimer: Zero-init old itimerval before copy to userspace
On native sparc64, struct __kernel_old_timeval contains a four-byte hole
after tv_usec because tv_sec is 64-bit while __kernel_suseconds_t is 32-bit.
put_itimerval() fills only the named fields in a stack-allocated
__kernel_old_itimerval and copies the entire object to userspace, so
getitimer() can expose the two padding holes.
Zero-initialize the aggregate before assigning the fields so implicit
padding is deterministic before it crosses the user/kernel boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate: report RCU-tasks quiescent states in migrate_pages_batch()
migrate_pages_batch() unmaps each folio before moving it, and every
unmap runs the mmu_notifier invalidate callbacks. On KVM hosts
try_to_migrate() ends up in kvm_mmu_notifier_invalidate_range_start() ->
tdp_mmu_zap_leafs(), which is expensive, so unmapping a large batch keeps
the CPU busy for a long time.
The loop already calls cond_resched(), but on PREEMPTION kernels that is
a no-op, and involuntary preemption is not a Tasks-RCU quiescent state.
A long batch therefore never reports a quiescent state, and the
migrating task (e.g. kcompactd) becomes a Tasks-RCU holdout, stalling the
Tasks-RCU grace period for minutes, which is common at Meta fleet:
INFO: rcu_tasks detected stalls on tasks:
0000000055349ecc: .. nvcsw: 1157401/1157401 holdout: 1 idle_cpu: -1/56 task:kcompactd0 state:R running task
Call Trace:
tdp_mmu_zap_leafs
tdp_mmu_next_root
gfn_to_pfn_cache_invalidate_start
kvm_mmu_notifier_invalidate_range_start
__mmu_notifier_invalidate_range_start
try_to_migrate_one
try_to_migrate
migrate_pages_batch
migrate_pages
compact_zone
compact_node
kcompactd
kthread
Use cond_resched_tasks_rcu_qs() so a quiescent state is reported even
when cond_resched() does nothing.
This has also been discussed at [1] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmscan: report RCU-tasks quiescent states in shrink_lruvec()
I am seeing some rcu_tasks stalls in the Meta fleet during reclaim.
INFO: rcu_tasks detected stalls on tasks:
0000000088620d09: .. nvcsw: 6735/6735 holdout: 1 idle_cpu: -1/8
task:GlobalCPUThread state:R running task pid:2552016 tgid:2524552
Call Trace:
shrink_lruvec
mem_cgroup_iter
shrink_node
do_try_to_free_pages
try_to_free_pages
__alloc_frozen_pages_noprof
alloc_pages_noprof
pte_alloc_one
__pte_alloc
handle_mm_fault
Nothing promises direct reclaim returns in bounded time, and the scan loop
in shrink_lruvec() only calls cond_resched(), which is a no-op on
PREEMPTION kernels. Involuntary preemption is not a Tasks-RCU quiescent
state, so the reclaiming task never reports one and becomes a holdout.
Upgrade it to cond_resched_tasks_rcu_qs(), which reports a quiescent state
even when cond_resched() does nothing.
PS: This has been discussed in [1] |
| In the Linux kernel, the following vulnerability has been resolved:
mm: memcg: stop reclaim when a limit update is superseded
kernfs serializes file operations only per open file, so separate open
files can update the same memory.high or memory.max file concurrently.
Both handlers store the new limit before synchronous reclaim, but continue
to use the writer's local target in the reclaim loop. If another writer
raises or removes the limit, the first writer can continue reclaiming
toward a stale target.
For memory.max, this can leave the writer looping indefinitely once
reclaim retries are exhausted. The OOM path sees sufficient margin under
the current limit and returns true without killing, while the writer still
compares usage against its stale target and records another OOM event.
Check the current limit at the start of each reclaim iteration and stop if
it no longer matches the writer's target.
Reproducer:
Populate a cgroup with anonymous memory and disable swapping. Lower
memory.max from one open file, then restore it to "max" through another
open file after the new limit becomes visible.
Without the patch, the first writer remains blocked and repeatedly
increments the OOM event counter. With the patch, it returns normally.
This was not motivated by a reported production workload. We found it
through automated randomized testing for our cgroup observability work
and reduced it to the reproducer above. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/tdx: Fix off-by-one in port I/O handling
handle_in() and handle_out() in arch/x86/coco/tdx/tdx.c use:
u64 mask = GENMASK(BITS_PER_BYTE * size, 0);
GENMASK(h, l) includes bit h. For size=1 (INB), this produces
GENMASK(8, 0) = 0x1FF (9 bits) instead of GENMASK(7, 0) = 0xFF (8
bits). The mask is one bit too wide for all I/O sizes.
Fix the mask calculation. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/user_events: Clear copied tracing state before fork duplication
dup_task_struct() copies user_event_mm from the parent into the child,
without grabbing a reference to it. user_event_mm_dup() should
replace it, but it leaves that copied pointer unmodified if
user_event_mm_alloc() fails.
When the child exits, user_event_mm_remove() decrements a reference
the child never owned, which ultimately frees user_event_mm, while
the parent still as a stale pointer to it. This creates a UAF, which
KASAN reports as:
BUG: KASAN: slab-use-after-free in
current_user_event_mm+0x51/0x1d0 Write of size 4 at addr
ffff888005010d30 by task init/44
Call Trace:
<TASK>
kasan_report+0xce/0x100
kasan_check_range+0x10f/0x1e0
current_user_event_mm+0x51/0x1d0
user_events_ioctl+0x82e/0x15c0
__x64_sys_ioctl+0x139/0x1c0
do_syscall_64+0xce/0x450
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task 44:
__kasan_kmalloc+0x8f/0xa0
__kmalloc_cache_noprof+0x180/0x3a0
user_event_mm_alloc+0x3c/0x1f0
current_user_event_mm+0x88/0x1d0
Freed by task 42:
__kasan_slab_free+0x43/0x70
kfree+0x13a/0x390
process_one_work+0x696/0xf90
worker_thread+0x420/0xba0
The fix simply clears the copied pointer before any possible failure.
In case of failure, the child then has nothing to free. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix crash passing ERR_PTR to kthread_stop()
event_test_stuff() calls kthread_run() and unconditionally passes the
returned task_struct pointer to kthread_stop(). kthread_run() returns an
error pointer such as ERR_PTR(-ENOMEM) when kthread creation fails, for
example under memory pressure during the boot-time event self-test.
kthread_stop() then dereferences the invalid pointer, crashing the kernel.
Check the result of kthread_run() before passing it to kthread_stop(). Use
WARN_ON() so that a failure to create the self-test thread does not go
unnoticed, matching the ring-buffer self-test fix in commit
91542863abad ("ring-buffer: Fix crash passing ERR_PTR to kthread_stop()"). |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix use-after-free with same-name named triggers
When two hist triggers on different events are registered with the same
name=, the second one reuses the first as named_data. Both are added to
tr->hist_vars by save_hist_vars() during event_hist_trigger_parse(),
because save_hist_vars() is called before event_trigger_register() while
the named reuse is only detected later, in hist_register_trigger().
In the named-data branch hist_register_trigger() then frees the second
histogram's hist_data via destroy_hist_data(), but never removes its
tr->hist_vars list entry, leaving a dangling pointer and leaking the
trace_array reference it holds.
A later hist trigger that references a variable makes find_var_file()
walk tr->hist_vars and dereference the freed hist_data. The bug is
reproducible from userspace by writing three hist triggers to tracefs:
cd /sys/kernel/tracing
echo 'hist:keys=common_pid:x=common_pid:name=mh' > events/sched/sched_switch/trigger
echo 'hist:keys=common_pid:x=common_pid:name=mh' > events/sched/sched_process_fork/trigger
echo 'hist:keys=common_pid:vals=$x' > events/sched/sched_process_exit/trigger
The third write panics the kernel:
BUG: KASAN: slab-use-after-free in find_var_file.part.0+0x272/0x290
Read of size 8 at addr ffff888001f8a0e0 by task sh/1
CPU: 1 UID: 0 PID: 1 Comm: sh Tainted: G D N
Call Trace:
find_var_file.part.0
find_event_var
parse_atom
parse_expr
__create_val_field
event_hist_trigger_parse
trigger_process_regex
event_trigger_write
vfs_write
ksys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
Allocated by task 1:
event_hist_trigger_parse
Freed by task 1:
hist_register_trigger+0x618/0xa30
event_hist_trigger_parse
The buggy address belongs to freed 2048-byte region
Oops: general protection fault ... RIP: find_var_file.part.0
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Fix by removing the hist_data from tr->hist_vars and releasing the
trace_array reference in the named-data branch of hist_register_trigger()
before freeing the hist_data. |
| In the Linux kernel, the following vulnerability has been resolved:
device property: fix infinite loop in fwnode_for_each_child_node()
When iterate over children of a fwnode that has a secondary fwnode,
fwnode_get_next_child_node() can enter an infinite loop if the secondary
fwnode has more than one child.
Parent Child
(Primary fwnode) FWa: {FWa1, FWa2, FWa3}
(Secondary fwnode) FWb: {FWb1, FWb2}
In this case:
┌─> fwnode_get_next_child_node(FWa, FWa1)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa1) returns FWa2
│
│ ...
│
│ fwnode_get_next_child_node(FWa, FWa3)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa3) returns NULL
│ - fwnode_call_ptr_op(FWb, get_next_child_node, FWa3) returns FWb1
│
│ fwnode_get_next_child_node(FWa, FWb1)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWb1) returns FWa1
└────┘
This cause fwnode_for_each_child_node() to loop indefinitely, reapeatedly
output {FWa1, FWa2, FWa3, FWb1, FWa1, ...}.
The root cause is that when the current child (FWb1) belongs to the
secondary fwnode, calling get_next_child_node() on the parimary fwnode
incorrectly returns the first child (FWa1) again instead of NULL.
Fix this by dynamically checking the parent fwnode of the current child
before calling get_next_child_node(). This approach follows the pattern
established in commit b5b41ab6b0c1 ("device property: Check
fwnode->secondary in fwnode_graph_get_next_endpoint()"). |
| In the Linux kernel, the following vulnerability has been resolved:
rapidio: mport_cdev: fix use-after-free in dma_req_free()
dma_req_free() acquires buf_mutex through req->map, drops the mapping
reference with kref_put(), and then dereferences req->map again to unlock
the mutex.
If kref_put() drops the last reference, mport_release_mapping() frees the
mapping, and the subsequent mutex_unlock() dereferences a freed object.
This is a use-after-free.
Fix this by caching map and md before kref_put(), clearing req->map while
holding buf_mutex, and using the cached md for mutex unlocking.
The bug is reachable from userspace via the RapidIO mport character device
interface. |
