| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: Add missing lock in cfg80211_check_and_end_cac()
Callers of wdev_chandef() must hold the wiphy mutex.
But the worker cfg80211_propagate_cac_done_wk() never takes the lock.
Which triggers the warning below with the mesh_peer_connected_dfs
test from hostapd and not (yet) released mac80211 code changes:
WARNING: CPU: 0 PID: 495 at net/wireless/chan.c:1552 wdev_chandef+0x60/0x165
Modules linked in:
CPU: 0 UID: 0 PID: 495 Comm: kworker/u4:2 Not tainted 6.14.0-rc5-wt-g03960e6f9d47 #33 13c287eeabfe1efea01c0bcc863723ab082e17cf
Workqueue: cfg80211 cfg80211_propagate_cac_done_wk
Stack:
00000000 00000001 ffffff00 6093267c
00000000 6002ec30 6d577c50 60037608
00000000 67e8d108 6063717b 00000000
Call Trace:
[<6002ec30>] ? _printk+0x0/0x98
[<6003c2b3>] show_stack+0x10e/0x11a
[<6002ec30>] ? _printk+0x0/0x98
[<60037608>] dump_stack_lvl+0x71/0xb8
[<6063717b>] ? wdev_chandef+0x60/0x165
[<6003766d>] dump_stack+0x1e/0x20
[<6005d1b7>] __warn+0x101/0x20f
[<6005d3a8>] warn_slowpath_fmt+0xe3/0x15d
[<600b0c5c>] ? mark_lock.part.0+0x0/0x4ec
[<60751191>] ? __this_cpu_preempt_check+0x0/0x16
[<600b11a2>] ? mark_held_locks+0x5a/0x6e
[<6005d2c5>] ? warn_slowpath_fmt+0x0/0x15d
[<60052e53>] ? unblock_signals+0x3a/0xe7
[<60052f2d>] ? um_set_signals+0x2d/0x43
[<60751191>] ? __this_cpu_preempt_check+0x0/0x16
[<607508b2>] ? lock_is_held_type+0x207/0x21f
[<6063717b>] wdev_chandef+0x60/0x165
[<605f89b4>] regulatory_propagate_dfs_state+0x247/0x43f
[<60052f00>] ? um_set_signals+0x0/0x43
[<605e6bfd>] cfg80211_propagate_cac_done_wk+0x3a/0x4a
[<6007e460>] process_scheduled_works+0x3bc/0x60e
[<6007d0ec>] ? move_linked_works+0x4d/0x81
[<6007d120>] ? assign_work+0x0/0xaa
[<6007f81f>] worker_thread+0x220/0x2dc
[<600786ef>] ? set_pf_worker+0x0/0x57
[<60087c96>] ? to_kthread+0x0/0x43
[<6008ab3c>] kthread+0x2d3/0x2e2
[<6007f5ff>] ? worker_thread+0x0/0x2dc
[<6006c05b>] ? calculate_sigpending+0x0/0x56
[<6003b37d>] new_thread_handler+0x4a/0x64
irq event stamp: 614611
hardirqs last enabled at (614621): [<00000000600bc96b>] __up_console_sem+0x82/0xaf
hardirqs last disabled at (614630): [<00000000600bc92c>] __up_console_sem+0x43/0xaf
softirqs last enabled at (614268): [<00000000606c55c6>] __ieee80211_wake_queue+0x933/0x985
softirqs last disabled at (614266): [<00000000606c52d6>] __ieee80211_wake_queue+0x643/0x985 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix WARN_ON for monitor mode on some devices
On devices without WANT_MONITOR_VIF (and probably without
channel context support) we get a WARN_ON for changing the
per-link setting of a monitor interface.
Since we already skip AP_VLAN interfaces and MONITOR with
WANT_MONITOR_VIF and/or NO_VIRTUAL_MONITOR should update
the settings, catch this in the link change code instead
of the warning. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: Fix potential NULL dereference on kmalloc failure
Avoid potential NULL pointer dereference by checking the return value of
kmalloc and handling allocation failure properly. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable migration in nf_hook_run_bpf().
syzbot reported that the netfilter bpf prog can be called without
migration disabled in xmit path.
Then the assertion in __bpf_prog_run() fails, triggering the splat
below. [0]
Let's use bpf_prog_run_pin_on_cpu() in nf_hook_run_bpf().
[0]:
BUG: assuming non migratable context at ./include/linux/filter.h:703
in_atomic(): 0, irqs_disabled(): 0, migration_disabled() 0 pid: 5829, name: sshd-session
3 locks held by sshd-session/5829:
#0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1667 [inline]
#0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x20/0x50 net/ipv4/tcp.c:1395
#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline]
#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline]
#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: __ip_queue_xmit+0x69/0x26c0 net/ipv4/ip_output.c:470
#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline]
#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline]
#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: nf_hook+0xb2/0x680 include/linux/netfilter.h:241
CPU: 0 UID: 0 PID: 5829 Comm: sshd-session Not tainted 6.16.0-rc6-syzkaller-00002-g155a3c003e55 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120
__cant_migrate kernel/sched/core.c:8860 [inline]
__cant_migrate+0x1c7/0x250 kernel/sched/core.c:8834
__bpf_prog_run include/linux/filter.h:703 [inline]
bpf_prog_run include/linux/filter.h:725 [inline]
nf_hook_run_bpf+0x83/0x1e0 net/netfilter/nf_bpf_link.c:20
nf_hook_entry_hookfn include/linux/netfilter.h:157 [inline]
nf_hook_slow+0xbb/0x200 net/netfilter/core.c:623
nf_hook+0x370/0x680 include/linux/netfilter.h:272
NF_HOOK_COND include/linux/netfilter.h:305 [inline]
ip_output+0x1bc/0x2a0 net/ipv4/ip_output.c:433
dst_output include/net/dst.h:459 [inline]
ip_local_out net/ipv4/ip_output.c:129 [inline]
__ip_queue_xmit+0x1d7d/0x26c0 net/ipv4/ip_output.c:527
__tcp_transmit_skb+0x2686/0x3e90 net/ipv4/tcp_output.c:1479
tcp_transmit_skb net/ipv4/tcp_output.c:1497 [inline]
tcp_write_xmit+0x1274/0x84e0 net/ipv4/tcp_output.c:2838
__tcp_push_pending_frames+0xaf/0x390 net/ipv4/tcp_output.c:3021
tcp_push+0x225/0x700 net/ipv4/tcp.c:759
tcp_sendmsg_locked+0x1870/0x42b0 net/ipv4/tcp.c:1359
tcp_sendmsg+0x2e/0x50 net/ipv4/tcp.c:1396
inet_sendmsg+0xb9/0x140 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
sock_write_iter+0x4aa/0x5b0 net/socket.c:1131
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x6c7/0x1150 fs/read_write.c:686
ksys_write+0x1f8/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe7d365d407
Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff
RSP: |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_nfacct: don't assume acct name is null-terminated
BUG: KASAN: slab-out-of-bounds in .. lib/vsprintf.c:721
Read of size 1 at addr ffff88801eac95c8 by task syz-executor183/5851
[..]
string+0x231/0x2b0 lib/vsprintf.c:721
vsnprintf+0x739/0xf00 lib/vsprintf.c:2874
[..]
nfacct_mt_checkentry+0xd2/0xe0 net/netfilter/xt_nfacct.c:41
xt_check_match+0x3d1/0xab0 net/netfilter/x_tables.c:523
nfnl_acct_find_get() handles non-null input, but the error
printk relied on its presence. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: add a retry logic in net6_rt_notify()
inet6_rt_notify() can be called under RCU protection only.
This means the route could be changed concurrently
and rt6_fill_node() could return -EMSGSIZE.
Re-size the skb when this happens and retry, removing
one WARN_ON() that syzbot was able to trigger:
WARNING: CPU: 3 PID: 6291 at net/ipv6/route.c:6342 inet6_rt_notify+0x475/0x4b0 net/ipv6/route.c:6342
Modules linked in:
CPU: 3 UID: 0 PID: 6291 Comm: syz.0.77 Not tainted 6.16.0-rc7-syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:inet6_rt_notify+0x475/0x4b0 net/ipv6/route.c:6342
Code: fc ff ff e8 6d 52 ea f7 e9 47 fc ff ff 48 8b 7c 24 08 4c 89 04 24 e8 5a 52 ea f7 4c 8b 04 24 e9 94 fd ff ff e8 9c fe 84 f7 90 <0f> 0b 90 e9 bd fd ff ff e8 6e 52 ea f7 e9 bb fb ff ff 48 89 df e8
RSP: 0018:ffffc900035cf1d8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffffc900035cf540 RCX: ffffffff8a36e790
RDX: ffff88802f7e8000 RSI: ffffffff8a36e9d4 RDI: 0000000000000005
RBP: ffff88803c230f00 R08: 0000000000000005 R09: 00000000ffffffa6
R10: 00000000ffffffa6 R11: 0000000000000001 R12: 00000000ffffffa6
R13: 0000000000000900 R14: ffff888032ea4100 R15: 0000000000000000
FS: 00007fac7b89a6c0(0000) GS:ffff8880d6a20000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fac7b899f98 CR3: 0000000034b3f000 CR4: 0000000000352ef0
Call Trace:
<TASK>
ip6_route_mpath_notify+0xde/0x280 net/ipv6/route.c:5356
ip6_route_multipath_add+0x1181/0x1bd0 net/ipv6/route.c:5536
inet6_rtm_newroute+0xe4/0x1a0 net/ipv6/route.c:5647
rtnetlink_rcv_msg+0x95e/0xe90 net/core/rtnetlink.c:6944
netlink_rcv_skb+0x155/0x420 net/netlink/af_netlink.c:2552
netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline]
netlink_unicast+0x58d/0x850 net/netlink/af_netlink.c:1346
netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1896
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
____sys_sendmsg+0xa95/0xc70 net/socket.c:2566
___sys_sendmsg+0x134/0x1d0 net/socket.c:2620 |
| In the Linux kernel, the following vulnerability has been resolved:
rv: Use strings in da monitors tracepoints
Using DA monitors tracepoints with KASAN enabled triggers the following
warning:
BUG: KASAN: global-out-of-bounds in do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0
Read of size 32 at addr ffffffffaada8980 by task ...
Call Trace:
<TASK>
[...]
do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0
? __pfx_do_trace_event_raw_event_event_da_monitor+0x10/0x10
? trace_event_sncid+0x83/0x200
trace_event_sncid+0x163/0x200
[...]
The buggy address belongs to the variable:
automaton_snep+0x4e0/0x5e0
This is caused by the tracepoints reading 32 bytes __array instead of
__string from the automata definition. Such strings are literals and
reading 32 bytes ends up in out of bound memory accesses (e.g. the next
automaton's data in this case).
The error is harmless as, while printing the string, we stop at the null
terminator, but it should still be fixed.
Use the __string facilities while defining the tracepoints to avoid
reading out of bound memory. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: davinci: Add NULL check in davinci_lpsc_clk_register()
devm_kasprintf() returns NULL when memory allocation fails. Currently,
davinci_lpsc_clk_register() does not check for this case, which results
in a NULL pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue and ensuring
no resources are left allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: cpcap-charger: Fix null check for power_supply_get_by_name
In the cpcap_usb_detect() function, the power_supply_get_by_name()
function may return `NULL` instead of an error pointer.
To prevent potential null pointer dereferences, Added a null check. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: spacemit: mark K1 pll1_d8 as critical
The pll1_d8 clock is enabled by the boot loader, and is ultimately a
parent for numerous clocks, including those used by APB and AXI buses.
Guodong Xu discovered that this clock got disabled while responding to
getting -EPROBE_DEFER when requesting a reset controller.
The needed clock (CLK_DMA, along with its parents) had already been
enabled. To respond to the probe deferral return, the CLK_DMA clock
was disabled, and this led to parent clocks also reducing their enable
count. When the enable count for pll1_d8 was decremented it became 0,
which caused it to be disabled. This led to a system hang.
Marking that clock critical resolves this by preventing it from being
disabled.
Define a new macro CCU_FACTOR_GATE_DEFINE() to allow clock flags to
be supplied for a CCU_FACTOR_GATE clock. |
| In the Linux kernel, the following vulnerability has been resolved:
pinmux: fix race causing mux_owner NULL with active mux_usecount
commit 5a3e85c3c397 ("pinmux: Use sequential access to access
desc->pinmux data") tried to address the issue when two client of the
same gpio calls pinctrl_select_state() for the same functionality, was
resulting in NULL pointer issue while accessing desc->mux_owner.
However, issue was not completely fixed due to the way it was handled
and it can still result in the same NULL pointer.
The issue occurs due to the following interleaving:
cpu0 (process A) cpu1 (process B)
pin_request() { pin_free() {
mutex_lock()
desc->mux_usecount--; //becomes 0
..
mutex_unlock()
mutex_lock(desc->mux)
desc->mux_usecount++; // becomes 1
desc->mux_owner = owner;
mutex_unlock(desc->mux)
mutex_lock(desc->mux)
desc->mux_owner = NULL;
mutex_unlock(desc->mux)
This sequence leads to a state where the pin appears to be in use
(`mux_usecount == 1`) but has no owner (`mux_owner == NULL`), which can
cause NULL pointer on next pin_request on the same pin.
Ensure that updates to mux_usecount and mux_owner are performed
atomically under the same lock. Only clear mux_owner when mux_usecount
reaches zero and no new owner has been assigned. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: imx95-blk-ctl: Fix synchronous abort
When enabling runtime PM for clock suppliers that also belong to a power
domain, the following crash is thrown:
error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP
Workqueue: events_unbound deferred_probe_work_func
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : clk_mux_get_parent+0x60/0x90
lr : clk_core_reparent_orphans_nolock+0x58/0xd8
Call trace:
clk_mux_get_parent+0x60/0x90
clk_core_reparent_orphans_nolock+0x58/0xd8
of_clk_add_hw_provider.part.0+0x90/0x100
of_clk_add_hw_provider+0x1c/0x38
imx95_bc_probe+0x2e0/0x3f0
platform_probe+0x70/0xd8
Enabling runtime PM without explicitly resuming the device caused
the power domain cut off after clk_register() is called. As a result,
a crash happens when the clock hardware provider is added and attempts
to access the BLK_CTL register.
Fix this by using devm_pm_runtime_enable() instead of pm_runtime_enable()
and getting rid of the pm_runtime_disable() in the cleanup path. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: imxfb: Check fb_add_videomode to prevent null-ptr-deref
fb_add_videomode() can fail with -ENOMEM when its internal kmalloc() cannot
allocate a struct fb_modelist. If that happens, the modelist stays empty but
the driver continues to register. Add a check for its return value to prevent
poteintial null-ptr-deref, which is similar to the commit 17186f1f90d3 ("fbdev:
Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var"). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb: scarlett2: Fix missing NULL check
scarlett2_input_select_ctl_info() sets up the string arrays allocated
via kasprintf(), but it misses NULL checks, which may lead to NULL
dereference Oops. Let's add the proper NULL check. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa/mlx5: Fix release of uninitialized resources on error path
The commit in the fixes tag made sure that mlx5_vdpa_free()
is the single entrypoint for removing the vdpa device resources
added in mlx5_vdpa_dev_add(), even in the cleanup path of
mlx5_vdpa_dev_add().
This means that all functions from mlx5_vdpa_free() should be able to
handle uninitialized resources. This was not the case though:
mlx5_vdpa_destroy_mr_resources() and mlx5_cmd_cleanup_async_ctx()
were not able to do so. This caused the splat below when adding
a vdpa device without a MAC address.
This patch fixes these remaining issues:
- Makes mlx5_vdpa_destroy_mr_resources() return early if called on
uninitialized resources.
- Moves mlx5_cmd_init_async_ctx() early on during device addition
because it can't fail. This means that mlx5_cmd_cleanup_async_ctx()
also can't fail. To mirror this, move the call site of
mlx5_cmd_cleanup_async_ctx() in mlx5_vdpa_free().
An additional comment was added in mlx5_vdpa_free() to document
the expectations of functions called from this context.
Splat:
mlx5_core 0000:b5:03.2: mlx5_vdpa_dev_add:3950:(pid 2306) warning: No mac address provisioned?
------------[ cut here ]------------
WARNING: CPU: 13 PID: 2306 at kernel/workqueue.c:4207 __flush_work+0x9a/0xb0
[...]
Call Trace:
<TASK>
? __try_to_del_timer_sync+0x61/0x90
? __timer_delete_sync+0x2b/0x40
mlx5_vdpa_destroy_mr_resources+0x1c/0x40 [mlx5_vdpa]
mlx5_vdpa_free+0x45/0x160 [mlx5_vdpa]
vdpa_release_dev+0x1e/0x50 [vdpa]
device_release+0x31/0x90
kobject_cleanup+0x37/0x130
mlx5_vdpa_dev_add+0x327/0x890 [mlx5_vdpa]
vdpa_nl_cmd_dev_add_set_doit+0x2c1/0x4d0 [vdpa]
genl_family_rcv_msg_doit+0xd8/0x130
genl_family_rcv_msg+0x14b/0x220
? __pfx_vdpa_nl_cmd_dev_add_set_doit+0x10/0x10 [vdpa]
genl_rcv_msg+0x47/0xa0
? __pfx_genl_rcv_msg+0x10/0x10
netlink_rcv_skb+0x53/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x27b/0x3b0
netlink_sendmsg+0x1f7/0x430
__sys_sendto+0x1fa/0x210
? ___pte_offset_map+0x17/0x160
? next_uptodate_folio+0x85/0x2b0
? percpu_counter_add_batch+0x51/0x90
? filemap_map_pages+0x515/0x660
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x7b/0x2c0
? do_read_fault+0x108/0x220
? do_pte_missing+0x14a/0x3e0
? __handle_mm_fault+0x321/0x730
? count_memcg_events+0x13f/0x180
? handle_mm_fault+0x1fb/0x2d0
? do_user_addr_fault+0x20c/0x700
? syscall_exit_work+0x104/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f0c25b0feca
[...]
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: compress: fix UAF of f2fs_inode_info in f2fs_free_dic
The decompress_io_ctx may be released asynchronously after
I/O completion. If this file is deleted immediately after read,
and the kworker of processing post_read_wq has not been executed yet
due to high workloads, It is possible that the inode(f2fs_inode_info)
is evicted and freed before it is used f2fs_free_dic.
The UAF case as below:
Thread A Thread B
- f2fs_decompress_end_io
- f2fs_put_dic
- queue_work
add free_dic work to post_read_wq
- do_unlink
- iput
- evict
- call_rcu
This file is deleted after read.
Thread C kworker to process post_read_wq
- rcu_do_batch
- f2fs_free_inode
- kmem_cache_free
inode is freed by rcu
- process_scheduled_works
- f2fs_late_free_dic
- f2fs_free_dic
- f2fs_release_decomp_mem
read (dic->inode)->i_compress_algorithm
This patch store compress_algorithm and sbi in dic to avoid inode UAF.
In addition, the previous solution is deprecated in [1] may cause system hang.
[1] https://lore.kernel.org/all/c36ab955-c8db-4a8b-a9d0-f07b5f426c3f@kernel.org |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to trigger foreground gc during f2fs_map_blocks() in lfs mode
w/ "mode=lfs" mount option, generic/299 will cause system panic as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:2835!
Call Trace:
<TASK>
f2fs_allocate_data_block+0x6f4/0xc50
f2fs_map_blocks+0x970/0x1550
f2fs_iomap_begin+0xb2/0x1e0
iomap_iter+0x1d6/0x430
__iomap_dio_rw+0x208/0x9a0
f2fs_file_write_iter+0x6b3/0xfa0
aio_write+0x15d/0x2e0
io_submit_one+0x55e/0xab0
__x64_sys_io_submit+0xa5/0x230
do_syscall_64+0x84/0x2f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0010:new_curseg+0x70f/0x720
The root cause of we run out-of-space is: in f2fs_map_blocks(), f2fs may
trigger foreground gc only if it allocates any physical block, it will be
a little bit later when there is multiple threads writing data w/
aio/dio/bufio method in parallel, since we always use OPU in lfs mode, so
f2fs_map_blocks() does block allocations aggressively.
In order to fix this issue, let's give a chance to trigger foreground
gc in prior to block allocation in f2fs_map_blocks(). |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pds: Fix missing detach_ioas op
When CONFIG_IOMMUFD is enabled and a device is bound to the pds_vfio_pci
driver, the following WARN_ON() trace is seen and probe fails:
WARNING: CPU: 0 PID: 5040 at drivers/vfio/vfio_main.c:317 __vfio_register_dev+0x130/0x140 [vfio]
<...>
pds_vfio_pci 0000:08:00.1: probe with driver pds_vfio_pci failed with error -22
This is because the driver's vfio_device_ops.detach_ioas isn't set.
Fix this by using the generic vfio_iommufd_physical_detach_ioas
function. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: pnv_php: Clean up allocated IRQs on unplug
When the root of a nested PCIe bridge configuration is unplugged, the
pnv_php driver leaked the allocated IRQ resources for the child bridges'
hotplug event notifications, resulting in a panic.
Fix this by walking all child buses and deallocating all its IRQ resources
before calling pci_hp_remove_devices().
Also modify the lifetime of the workqueue at struct pnv_php_slot::wq so
that it is only destroyed in pnv_php_free_slot(), instead of
pnv_php_disable_irq(). This is required since pnv_php_disable_irq() will
now be called by workers triggered by hot unplug interrupts, so the
workqueue needs to stay allocated.
The abridged kernel panic that occurs without this patch is as follows:
WARNING: CPU: 0 PID: 687 at kernel/irq/msi.c:292 msi_device_data_release+0x6c/0x9c
CPU: 0 UID: 0 PID: 687 Comm: bash Not tainted 6.14.0-rc5+ #2
Call Trace:
msi_device_data_release+0x34/0x9c (unreliable)
release_nodes+0x64/0x13c
devres_release_all+0xc0/0x140
device_del+0x2d4/0x46c
pci_destroy_dev+0x5c/0x194
pci_hp_remove_devices+0x90/0x128
pci_hp_remove_devices+0x44/0x128
pnv_php_disable_slot+0x54/0xd4
power_write_file+0xf8/0x18c
pci_slot_attr_store+0x40/0x5c
sysfs_kf_write+0x64/0x78
kernfs_fop_write_iter+0x1b0/0x290
vfs_write+0x3bc/0x50c
ksys_write+0x84/0x140
system_call_exception+0x124/0x230
system_call_vectored_common+0x15c/0x2ec
[bhelgaas: tidy comments] |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: pnv_php: Fix surprise plug detection and recovery
The existing PowerNV hotplug code did not handle surprise plug events
correctly, leading to a complete failure of the hotplug system after device
removal and a required reboot to detect new devices.
This comes down to two issues:
1) When a device is surprise removed, often the bridge upstream
port will cause a PE freeze on the PHB. If this freeze is not
cleared, the MSI interrupts from the bridge hotplug notification
logic will not be received by the kernel, stalling all plug events
on all slots associated with the PE.
2) When a device is removed from a slot, regardless of surprise or
programmatic removal, the associated PHB/PE ls left frozen.
If this freeze is not cleared via a fundamental reset, skiboot
is unable to clear the freeze and cannot retrain / rescan the
slot. This also requires a reboot to clear the freeze and redetect
the device in the slot.
Issue the appropriate unfreeze and rescan commands on hotplug events,
and don't oops on hotplug if pci_bus_to_OF_node() returns NULL.
[bhelgaas: tidy comments] |
