| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Apollo Router Core is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. Prior to 1.61.2 and 2.1.1, a vulnerability in Apollo Router allowed queries with deeply nested and reused named fragments to be prohibitively expensive to query plan, specifically during named fragment expansion. Named fragments were being expanded once per fragment spread during query planning, leading to exponential resource usage when deeply nested and reused fragments were involved. This could lead to excessive resource consumption and denial of service. This has been remediated in apollo-router versions 1.61.2 and 2.1.1. |
| The Apollo Router Core is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. A vulnerability in Apollo Router allowed queries with deeply nested and reused named fragments to be prohibitively expensive to query plan, specifically due to internal optimizations being frequently bypassed. The query planner includes an optimization that significantly speeds up planning for applicable GraphQL selections. However, queries with deeply nested and reused named fragments can generate many selections where this optimization does not apply, leading to significantly longer planning times. Because the query planner does not enforce a timeout, a small number of such queries can exhaust router's thread pool, rendering it inoperable. This could lead to excessive resource consumption and denial of service. This has been remediated in apollo-router versions 1.61.2 and 2.1.1. |
| Denial of service due to allocation of resources without limits. The following products are affected: Acronis Cyber Protect Cloud Agent (Windows) before build 39904, Acronis Cyber Protect 17 (Windows) before build 41186. |
| The Ruby SAML library is for implementing the client side of a SAML authorization. In versions 1.18.0 and below, a denial-of-service vulnerability exists in ruby-saml even with the message_max_bytesize setting configured. The vulnerability occurs because the SAML response is validated for Base64 format prior to checking the message size, leading to potential resource exhaustion. This is fixed in version 1.18.1. |
| A vulnerability in szad670401/hyperlpr v3.0 allows for a Denial of Service (DoS) attack. The server fails to handle excessive characters appended to the end of multipart boundaries, regardless of the character used. This flaw can be exploited by sending malformed multipart requests with arbitrary characters at the end of the boundary, leading to excessive resource consumption and a complete denial of service for all users. The vulnerability is unauthenticated, meaning no user login or interaction is required for an attacker to exploit this issue. |
| The Authorino service in the Red Hat Connectivity Link is the authorization service for zero trust API security. Authorino allows the users with developer persona to add callbacks to be executed to HTTP endpoints once the authorization process is completed. It was found that an attacker with developer persona access can add a large number of those callbacks to be executed by Authorino and as the authentication policy is enforced by a single instance of the service, this leada to a Denial of Service in Authorino while processing the post-authorization callbacks. |
| Cloudburst Network provides network components used within Cloudburst projects. A vulnerability in versions prior to `1.0.0.CR1-20240330.101522-15` impacts publicly accessible software depending on the affected versions of Network and allows an attacker to use Network as an amplification vector for a UDP denial of service attack against a third party or as an attempt to trigger service suspension of the host. All consumers of the library should upgrade to at least version `1.0.0.CR1-20240330.101522-15` to receive a fix. There are no known workarounds beyond updating the library. |
| Starting in Python 3.12.0, the asyncio._SelectorSocketTransport.writelines()
method would not "pause" writing and signal to the Protocol to drain
the buffer to the wire once the write buffer reached the "high-water
mark". Because of this, Protocols would not periodically drain the write
buffer potentially leading to memory exhaustion.
This
vulnerability likely impacts a small number of users, you must be using
Python 3.12.0 or later, on macOS or Linux, using the asyncio module
with protocols, and using .writelines() method which had new
zero-copy-on-write behavior in Python 3.12.0 and later. If not all of
these factors are true then your usage of Python is unaffected. |
| Very large headers can cause resource exhaustion when parsing message. The message-parser normally reads reasonably sized chunks of the message. However, when it feeds them to message-header-parser, it starts building up "full_value" buffer out of the smaller chunks. The full_value buffer has no size limit, so large headers can cause large memory usage. It doesn't matter whether it's a single long header line, or a single header split into multiple lines. This bug exists in all Dovecot versions. Incoming mails typically have some size limits set by MTA, so even largest possible header size may still fit into Dovecot's vsz_limit. So attackers probably can't DoS a victim user this way. A user could APPEND larger mails though, allowing them to DoS themselves (although maybe cause some memory issues for the backend in general). One can implement restrictions on headers on MTA component preceding Dovecot. No publicly available exploits are known. |
| xz is a pure golang package for reading and writing xz-compressed files. Prior to version 0.5.14, it is possible to put data in front of an LZMA-encoded byte stream without detecting the situation while reading the header. This can lead to increased memory consumption because the current implementation allocates the full decoding buffer directly after reading the header. The LZMA header doesn't include a magic number or has a checksum to detect such an issue according to the specification. Note that the code recognizes the issue later while reading the stream, but at this time the memory allocation has already been done. This issue has been patched in version 0.5.14. |
| EasyFlow GP developed by Digiwin has a Denial of service vulnerability, allowing unauthenticated remote attackers to send specific requests that result in denial of web service. |
| Bugsink is a self-hosted error tracking tool. In versions prior to 2.0.6, a specially crafted Brotli-compressed envelope can cause Bugsink to spend excessive CPU time in decompression, leading to denial of service. This can be done if the DSN is known, which it is in many common setups (JavaScript, Mobile Apps). The issue is patched in Bugsink 2.0.6. The vulnerability is similar to, but distinct from, another brotli-related problem in Bugsink, GHSA-fc2v-vcwj-269v/CVE-2025-64508. |
| An Allocation of Resources Without Limits or Throttling vulnerability in the ANSL-Server component of B&R Automation Runtime versions prior to 6.5 and prior to R4.93 could be exploited by an unauthenti-cated attacker on the network to win a race condition, resulting in permanent denial-of-service (DoS) conditions on affected devices. |
| A vulnerability in the web interface of the Güralp Fortimus Series, Minimus Series and Certimus Series allows an unauthenticated attacker with network access to send specially-crafted HTTP requests that can cause the web service process to deliberately restart. Although this mechanism limits the impact of the attack, it results in a brief denial-of-service condition during the restart. |
| nptd-rs is a tool for synchronizing your computer's clock, implementing the NTP and NTS protocols. There is a missing limit for accepted NTS-KE connections. This allows an unauthenticated remote attacker to crash ntpd-rs when an NTS-KE server is configured. Non NTS-KE server configurations, such as the default ntpd-rs configuration, are unaffected. This vulnerability has been patched in version 1.1.3.
|
| Letmein is an authenticating port knocker. Prior to version 10.2.1, The connection limiter is implemented incorrectly. It allows an arbitrary amount of simultaneously incoming connections (TCP, UDP and Unix socket) for the services letmeind and letmeinfwd. Therefore, the command line option num-connections is not effective and does not limit the number of simultaneously incoming connections. This issue has been patched in version 10.2.1. |
| Botan is a C++ cryptography library. X.509 certificates can identify elliptic curves using either an object identifier or using explicit encoding of the parameters. Prior to versions 3.3.0 and 2.19.4, an attacker could present an ECDSA X.509 certificate using explicit encoding where the parameters are very large. The proof of concept used a 16Kbit prime for this purpose. When parsing, the parameter is checked to be prime, causing excessive computation. This was patched in 2.19.4 and 3.3.0 to allow the prime parameter of the elliptic curve to be at most 521 bits. No known workarounds are available. Note that support for explicit encoding of elliptic curve parameters is deprecated in Botan. |
| Allocation of Resources Without Limits or Throttling vulnerability in LG Electronics LG SuperSign CMS allows Port Scanning.This issue affects LG SuperSign CMS: from 4.1.3 before < 4.3.1. |
| apollo-compiler is a query-based compiler for the GraphQL query language. Prior to 1.27.0, a vulnerability in Apollo Compiler allowed queries with deeply nested and reused named fragments to be prohibitively expensive to validate. Named fragments were being processed once per fragment spread in some cases during query validation, leading to exponential resource usage when deeply nested and reused fragments were involved. This could lead to excessive resource consumption and denial of service in applications. This vulnerability is fixed in 1.27.0. |
| Clients using DNS-over-HTTPS (DoH) can exhaust a DNS resolver's CPU and/or memory by flooding it with crafted valid or invalid HTTP/2 traffic.
This issue affects BIND 9 versions 9.18.0 through 9.18.32, 9.20.0 through 9.20.4, 9.21.0 through 9.21.3, and 9.18.11-S1 through 9.18.32-S1. |
