| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A heap use-after-free in the RTMP protocol component of Apache bRPC (versions < 1.18.0) allows a remote attacker to crash a bRPC RTMP server by sending a crafted Abort control message. No authentication or application-level request is required.
Root Cause:
When an RTMP Abort control message names the chunk stream that is currently being parsed (the chunk stream carrying the message itself), RtmpChunkStream::OnAbortMessage calls RtmpContext::ClearChunkStream, which deletes the RtmpChunkStream while its Feed() is still running. After the message handler returns, Feed() continues to access members of the deleted object, resulting in a heap-use-after-free.
Affected Scenarios:
bRPC servers that enable RTMP support (ServerOptions.rtmp_service set) and accept connections from untrusted networks.
How to Fix:
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3452
The fix skips clearing the chunk stream when the Abort message targets the chunk stream that is currently being parsed. |
| A reachable-assertion flaw in the HPACK header-compression decoder of the HTTP/2 (h2/gRPC) stack in Apache bRPC (version < 1.18.0) on all platforms allows a remote attacker to crash the server process by sending a crafted sequence of HPACK headers, resulting in a denial of service.
Root Cause:
In src/brpc/details/hpack.cpp, IndexTable::Init sizes the dynamic-table ring buffer as num_headers = max_size / (32 + 2), i.e. it assumes a minimum table entry of 34 bytes (name >= 1 byte + value >= 1 byte + 32 bytes of overhead). However, RFC 7541 section 4.1 specifies that the minimum entry size is 33 bytes, because the value may be empty (name >= 1 byte + value == 0 + 32 bytes). For the default 4096-byte table this allocates only 120 slots (4096/34). Eviction in AddHeader is driven by byte usage (_max_size), not by slot count, so a peer can add 121 minimal 33-byte entries (121*33 = 3993 <= 4096) without triggering eviction. The 121st AddHeader then hits CHECK(!_header_queue.full()), which aborts the process.
Affected Scenarios:
Use a bRPC server that serves HTTP/2 or gRPC requests (e.g. via the h2 protocol) from an untrusted network. The malicious header block is processed during HPACK decoding of incoming requests without authentication.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3462
Note:
The fix sizes the dynamic table for the 33-byte minimum entry (max_size / (32 + 1)) and ensures at least one ring-buffer slot is kept when max_size is smaller than the minimum entry, so that initialization cannot fail on malloc(0). |
| Uncontrolled resource consumption in the HTTP/2 (h2) receive path of Apache bRPC (version < 1.18.0) on all platforms allows a remote unauthenticated attacker to crash the server or grow its memory without bound by sending crafted HTTP/2 frames.
Root Cause:
The h2 parser, enabled by default on every bRPC server port and used by h2/gRPC clients, trusts the peer to respect receive-side limits that bRPC advertises but never enforces:
1. SETTINGS_MAX_CONCURRENT_STREAMS defaulted to unlimited and was never checked on the server, letting a peer pin an unbounded number of pending streams per connection (~100x memory amplification).
2. SETTINGS_MAX_HEADER_LIST_SIZE defaulted to unlimited and was never enforced; 1-byte HPACK indexed references amplify a small HEADERS frame ~4000x into an unbounded decoded header list ("HPACK bomb"), and a never-completed HEADERS/CONTINUATION block accumulates memory without limit.
3. Control-frame acks (PING/SETTINGS acks, RST_STREAM, GOAWAY, WINDOW_UPDATE) unconditionally bypassed the -socket_max_unwritten_bytes write cap, so a PING flood combined with withheld TCP reads grew the connection buffer without the documented bound.
4. The HPACK dynamic table size update was validated against the protocol default (4096) instead of the advertised SETTINGS_HEADER_TABLE_SIZE, which together with the dynamic-table queue/accounting issue can desynchronize the decoder and dereference NULL (crash).
Affected scenarios:
Any bRPC server serving HTTP/h2/gRPC to an untrusted network, and any bRPC h2/gRPC client connecting to an untrusted backend. The h2 parser runs before any Authenticator check on the shared port.
How to fix:
Upgrade bRPC, or apply the patch in https://github.com/apache/brpc/pull/3474.
Note:
After applying the fix the following limits are enforced by default:
- max_concurrent_streams: 1024 per connection (4294967295 restores unlimited).
- max_header_list_size: 1 MiB decoded size per stream (4294967295 restores unlimited; -h2_client_max_header_list_size for clients).
- h2 control-frame acks respect -socket_max_unwritten_bytes (-h2_ack_ignore_eovercrowded restores the old behavior).
Requests exceeding these limits are rejected (RST_STREAM(REFUSED_STREAM) or a connection error). |
| Resource exhaustion in Apache bRPC (version < 1.18.0) on all platforms: multiple parsers that accept wire-controlled input bound no limit on the sizes declared by the client or on decompressed output, which attackers can use to drive disproportionate memory use and crash the process.
Root Cause:
1) The gzip/zlib/snappy decompressors enforce no output limit: -max_body_size is checked against the compressed bytes only, so a cap-compliant body (e.g. 64 MiB) can decompress to tens of GiB.
2) The AMF string readers allocate the declared length before the bytes are actually available.
3) RTMP chunk headers may re-declare a message length mid-stream; the declared length was never bounded and the partial reassembly buffer kept growing.
4) The sofa-pbrpc parser does not bound meta_size.
5) mcpack2pb trusts wire-declared item counts for Reserve() and a string value_size of 0 underflows the buffer size, aborting the process.
Affected Scenarios:
Any bRPC service accepting gzip/zlib/snappy-compressed bodies or rtmp, sofa-pbrpc, or mcpack2pb messages from untrusted clients.
How to Fix:(Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3476
Note:
After the fix, requests whose decompressed size, RTMP message length, or mcpack declared count exceed the new limits are rejected. Operators who legitimately need larger values can raise the corresponding flag (-max_decompressed_body_size, max_body_size). |
| Missing authentication in the streaming RPC path of Apache bRPC (version < 1.18.0) on all platforms allows a remote attacker to bypass server authentication and inject or deliver streaming frames, when a server is configured with an Authenticator.
Root Cause:
When authentication is configured, streaming RPC frames are consumed directly by the streaming parser (ParseStreamingMessage) and never pass through InputMessenger's authentication hook, so an unauthenticated peer can exchange frames without being authenticated. In addition, a server-accepted stream is bound lazily to the first frame that happens to carry its id, so a stream could accept a frame carrying its id from a socket other than the socket that created the stream.
Affected Scenarios:
A bRPC server configured with authentication that serves streaming RPC from an untrusted network, or a deployment where a foreign connection can impersonate a stream by id, can be made to accept unauthorized streaming frames.
How to Fix:
Upgrade bRPC to 1.18.0, which fixes this issue, or apply the patch in PR https://github.com/apache/brpc/pull/3481.
Note:
The fix rejects streaming frames on server sockets when configured authentication has not completed, and keeps server-accepted streams bound to the socket of their creating RPC and rejects frames arriving from another socket. Authenticated streaming RPC behavior and the wire format are unchanged; only unauthenticated or foreign-socket frames are now rejected. |
| An out-of-bounds read vulnerability exists in the streaming RPC client of Apache bRPC (versions 1.11.0 through 1.17.0) on all platforms. A client that creates multiple streams in a single RPC expects the server response to carry exactly one extra_stream_id for every additional stream. The response handling path indexed the returned identifiers using the locally created stream count without first validating the size of the returned list, so a malicious or compromised server (or an on-path attacker) can trigger an out-of-bounds read in the client by returning a malformed StreamSettings response with fewer extra_stream_ids than expected. This may crash the client process (denial of service) or leak unintended memory contents into subsequent stream handling; surplus identifiers have no valid client-stream mapping and are processed inconsistently.
Root Cause:
Since bRPC 1.11.0, a client can create multiple streams in one RPC via batch StreamCreate. The expected behavior is that the server response must return exactly (N-1) extra_stream_ids, where N is the number of locally created streams. In Controller::HandleStreamConnection, the response path reads extra_stream_ids[i-1] for each additional local stream without first comparing the returned list size with (N-1). If the server returns fewer identifiers, the read runs past the end of the returned list (out-of-bounds read); if it returns more, the surplus identifiers have no corresponding client-side stream.
Affected Scenarios:
A bRPC client using multi-stream RPC (creating more than one stream in a single RPC) that connects to an untrusted, malicious, or compromised server or to a server reached through an untrusted network path. The server sends a malformed StreamSettings response to trigger the issue.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3485
Note:
The fix makes the client reject responses whose extra_stream_ids count does not exactly match the number of additional client streams. Such mismatched responses now fail the RPC with ERESPONSE and go through the existing stream cleanup path, instead of being partially processed. |
| Uncontrolled recursion in the mcpack2pb component in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to make the server crash via sending deeply nested mcpack data.
Root Cause:
The bRPC mcpack2pb parser (used to serve nshead_mcpack / ubrpc / public_pbrpc requests) recursively parses nested objects and arrays without any depth limit. For a protobuf message that references itself (e.g. a repeated message field), the generated parser recurses once per nesting level of the incoming mcpack object. A deeply nested request makes the recursion grow unbounded, overflow the stack and crash the process.
Affected Scenarios:
Use bRPC server with a recursive-schema protobuf message to serve nshead_mcpack / ubrpc / public_pbrpc requests from untrusted network.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3499
Note:
No matter which option you choose, you should know that the fix enforces the documented parsing depth limit MAX_DEPTH (128) on the parse path, the same limit the serializer already applies. If your requests contain mcpack messages nested deeper than 128 levels, the request will be failed after applying the fix. |
| Use-after-free in the RTMP protocol implementation in Apache bRPC (version < 1.18.0) on all platforms allows a malicious RTMP peer to crash the process or potentially corrupt memory via a crafted Abort message.
Root Cause:
When processing an RTMP Abort (protocol control message type 2), the RTMP policy implementation deleted the target RtmpChunkStream object. The send path (RtmpUnsentMessage::AppendAndDestroySelf -> RtmpChunkStream::SerializeMessage) runs concurrently on sender threads and dereferences the same RtmpChunkStream object without synchronization. If a remote peer sends an Abort message naming a chunk stream that is concurrently being used to serialize an outgoing message, the stream object is freed while still in use, resulting in a use-after-free. Additionally, deleting the chunk stream discarded its previous message header, so subsequent compressed (type-3) chunk headers on that stream could no longer be decoded.
Affected Scenarios:
Any application using the bRPC RTMP protocol implementation (rtmp policy), either as an RTMP server or as an RTMP client, where the remote endpoint is untrusted. The attacker needs to send an Abort message targeting a chunk stream id that is concurrently used for sending, which can crash the process or lead to memory corruption.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3515 |
| On a brpc::Server that sets both ServerOptions.auth and ServerOptions.internal_port, the HTTP built-in service exemption on internal_port can be abused to bypass authentication entirely. VerifyHttpRequest() returns true without checking any credential when a built-in service is requested on internal_port, and this verdict is not per - request: verification runs only for the first message of a connection and the result latches the connection. Sending a request such as GET /status to internal_port first authenticates the whole connection, after which every subsequent request dispatched on the same connection is handled without ever calling VerifyHttpRequest(). This lets a remote attacker reach ordinary (non-built-in, non-tabbed) authenticated services without supplying valid credentials whenever the server uses ServerOptions.internal_port together with an Authenticator. The fix restricts internal_port so that it carries only built-in and Tabbed services; requests for ordinary services sent to internal_port are rejected with EPREM / HTTP 403.
Mitigation / Fix: upgrade to 1.18.0 or apply PR https://github.com/apache/brpc/pull/3525 .
Users who rely on serving normal services on internal_port must move those requests to the port passed to Server::Start(). |
| PHPOffice PHPPresentation 1.2.0 contains a cross-site scripting vulnerability in the HTML writer that allows attackers who supply presentation content to inject script into generated HTML. Attackers can craft a PPTX with malicious text runs, hyperlink relationship targets, or shape descr attributes that are emitted unescaped, executing script in viewers' browsers. |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 Generic Routing Encapsulation (GRE) Detection Engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection.
This vulnerability is due to incomplete error checking when Snort 3 parses GRE packets. An attacker could exploit this vulnerability by sending a crafted GRE packet to a targeted device to be parsed by Snort. A successful exploit could allow the attacker to cause the Snort 3 Detection Engine to restart unexpectedly, resulting in a DoS condition. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco owned Open Source Snort 3 Software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20291 are related to issues concerning improper privilege management that are grouped under the Common Weakness Enumeration (CWE) Base CWE-269. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-76490 are related to issues concerning out-of-bounds writes that are grouped under the Common Weakness Enumeration (CWE) Base CWE-787. |
| A vulnerability in the control channel socket implementation of Open Source Snort 3 could allow an authenticated, local attacker with low privileges to execute arbitrary commands as the Snort 3 process user.
This vulnerability is due to a lack of authentication when a local user connects to the Snort control channel socket. An attacker could exploit this vulnerability by connecting to the Snort 3 control channel socket as a local user. A successful exploit could allow the attacker to execute arbitrary commands as well as read and write Snort 3 process memory. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-76497 are related to issues concerning insecure temporary files that are grouped under the Common Weakness Enumeration (CWE) Base CWE-377. |
| D365 F&O MCP Server is a Model Context Protocol server for querying Dynamics 365 Finance & Operations X++ code and metadata. Prior to version 1.11.0, the officially documented Azure one-click deployment uses infrastructure/azuredeploy.json and infrastructure/main.bicep to default the apiKey parameter to an empty string and pass it to the App Service API_KEY setting. With API_KEY unset or empty, src/middleware/apiKeyAuth.ts passes requests through without authentication, while src/index.ts binds the HTTP listener to 0.0.0.0 by default. If the deployer leaves the optional key blank and does not add separate network restrictions or upstream authentication, the resulting public App Service allows unauthenticated JSON-RPC tools/call requests to /mcp. The deployment's MCP_SERVER_MODE=read-only setting does not prevent anonymous access to read/search tools, including search, get_object_info, batch_get_info, extension_info, security_info, find_references, and find_event_handlers, exposing indexed proprietary X++ source snippets and metadata. Exposed information can include business logic, extension and event-handler wiring, security-role and privilege structure, and labels originally indexed from PackagesLocalDirectory. Deployments protected by a configured API key, effective upstream authentication, or network restrictions preventing attacker access are outside this unauthenticated exposure scenario. This issue is fixed in version 1.11.0. |
| Airbyte OneDrive Connector _get_shared_drive_object Server-Side Request Forgery Information Disclosure Vulnerability. This vulnerability allows remote attackers to initiate arbitrary server-side requests on affected installations of Airbyte. Authentication is required to exploit this vulnerability.
The specific flaw exists within the _get_shared_drive_object method. The issue results from the lack of proper validation of a URI prior to accessing resources. An attacker can leverage this vulnerability to disclose information in the context of the service account. Was ZDI-CAN-28216. |
| Improper certificate validation in the OpenVPN 3 Core library version 3.4 through 3.11.7 allows attackers to circumvent extended key usage restrictions. |
| YiShaAdmin 2.2 through 3.1, fixed in commit 025b062, contains an unauthenticated path traversal vulnerability in the /admin/File/DownloadFile endpoint that allows attackers to read and delete arbitrary files via the filePath parameter. Attackers can send crafted GET requests with directory traversal sequences in filePath and set the delete parameter to read or remove system files like etc/passwd. Exploitation evidence was first observed by the Shadowserver Foundation on 2023-10-20. |
| Lotus through 0.10.2 contains an authorization bypass vulnerability in ChangeUserOrganizationView.post that allows authenticated users to join any organization by supplying its UUID. Self-registered attackers who know another organization's UUID can send a POST request to /app/switch_organization/ to access that tenant's data and billing configuration. |
