Search vulnerabilities

Expected end of text, found '–' (at char 41), (line:1, col:42)
Use the Query Builder to create your own search query, or check out the documentation to learn the search syntax.

Results 425,824

CVE-2026-64343

USB: ldusb: fix use-after-free on disconnect race

In the Linux kernel, the following vulnerability has been resolved: USB: ldusb: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-64342

USB: iowarrior: fix use-after-free on disconnect

In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect Submitted write URBs are not stopped on close() and therefore need to be stopped unconditionally on disconnect() to avoid use-after-free in the completion handler.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-64341

USB: iowarrior: fix use-after-free on disconnect race

In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-64340

USB: legousbtower: fix use-after-free on disconnect race

In the Linux kernel, the following vulnerability has been resolved: USB: legousbtower: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-64338

USB: misc: uss720: unregister parport on probe failure

In the Linux kernel, the following vulnerability has been resolved: USB: misc: uss720: unregister parport on probe failure uss720_probe() registers a parport before reading the 1284 register used to detect unsupported Belkin F5U002 adapters. If get_1284_register() fails, the error path drops the driver private data and the USB device reference, but leaves the parport device registered. Leaving the port registered is more than a private allocation leak: parport_register_port() has already reserved a parport number and registered the parport bus device, while pp->private_data still points at the private data that the common error path is about to release. Undo the pre-announce registration in the get_1284_register() failure branch before jumping to the common private-data cleanup path. Clear priv->pp first, matching the disconnect path and avoiding a stale pointer in the private data. This issue was identified during our ongoing static-analysis research while reviewing kernel code.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-64336

USB: serial: keyspan_pda: fix information leak

In the Linux kernel, the following vulnerability has been resolved: USB: serial: keyspan_pda: fix information leak The write() callback is supposed to return the number of characters accepted or a negative errno. Since the addition of write fifo support the keyspan_pda implementation will however return the number characters submitted to the device if the write urb is not already in use. If this number is larger than the number of characters passed to write(), the line discipline continues writing data from beyond the tty write buffer. Fix the information leak by making sure that keyspan_pda_write_start() returns zero on success as intended.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-64335

USB: serial: digi_acceleport: fix broken rx after throttle

In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix broken rx after throttle If the port is closed while throttled, the read urb is never resubmitted and the port will not receive any further data until the device is reconnected (or the driver is rebound). Clear the throttle flags and submit the urb if needed when opening the port.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-64334

USB: serial: digi_acceleport: fix hard lockup on disconnect

In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix hard lockup on disconnect If submitting the OOB write urb fails persistently (e.g if the device is being disconnected) the driver would loop indefinitely with interrupts disabled. Check for urb submission errors when sending OOB commands to avoid hanging if, for example, open(), set_termios() or close() races with a physical disconnect. This is issue was flagged by Sashiko when reviewing an unrelated change to the driver.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-64332

USB: ulpi: fix memory leak on registration failure

In the Linux kernel, the following vulnerability has been resolved: USB: ulpi: fix memory leak on registration failure The allocated device name is never freed on early ULPI device registration failures. Fix this by initialising the device structure earlier and releasing the initial reference whenever registration fails.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-64331

usbip: vudc: fix NULL deref in vep_dequeue()

In the Linux kernel, the following vulnerability has been resolved: usbip: vudc: fix NULL deref in vep_dequeue() vep_alloc_request() wasn't initializing vrequest->udc, so cancellations on the FunctionFS AIO path were arriving in vep_dequeue without a valid UDC reference. Since vrequest->udc is never actually properly used anywhere, we opt to remove it, and update vep_dequeue to obtain a reference to the udc with ep_to_vudc(), consistent with the other vep_ ops. AFAICT this bug has existed for ~10 years. Seems that nobody has really stressed the FunctionFS AIO path on usbip's vudc. I tested this fix in a QEMU aarch64 guest driving FunctionFS endpoints via AIO. Before the fix, running `usbip attach` from the host would cause the guest to oops with the following backtrace: Call trace: vep_dequeue+0x1c/0xe4 (P) usb_ep_dequeue+0x14/0x20 ffs_aio_cancel+0x24/0x34 __arm64_sys_io_cancel+0xb0/0x124 do_el0_svc+0x68/0x100 el0_svc+0x18/0x5c el0t_64_sync_handler+0x98/0xdc el0t_64_sync+0x154/0x158

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-64330

usb: typec: tcpm: Validate SVID index in svdm_consume_modes()

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: Validate SVID index in svdm_consume_modes() In svdm_consume_modes(), the SVID value is read from pmdata->svids using pmdata->svid_index as an array index without bounds validation: paltmode->svid = pmdata->svids[pmdata->svid_index]; If pmdata->svid_index is driven beyond SVID_DISCOVERY_MAX (16), it results in an out-of-bounds read of the pmdata->svids array. Because pd_mode_data is embedded inside struct tcpm_port, indexing past svids reads into adjacent fields. In particular: - At index 16, it reads the altmodes count. - At index 18 and beyond, it reads into altmode_desc[], which contains partner-supplied SVDM Discovery Modes VDOs. By injecting a chosen SVID into altmode_desc[0].vdo and driving svid_index to 20, the partner can force paltmode->svid to be loaded with an arbitrary, partner- chosen SVID, which is then registered via typec_partner_register_altmode(). Fix this by validating that pmdata->svid_index is non-negative and strictly less than pmdata->nsvids before accessing the pmdata->svids array inside svdm_consume_modes().

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-64329

usb: typec: ucsi: ccg: Fix use-after-free of ucsi on remove

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: ccg: Fix use-after-free of ucsi on remove The threaded IRQ handler ccg_irq_handler() calls ucsi_notify_common(), which on a connector-change event calls ucsi_connector_change() and schedules connector work. In ucsi_ccg_remove(), ucsi_destroy() frees uc->ucsi (kfree) before free_irq() is called, so a handler invocation already in flight may access the freed object after ucsi_destroy(). CPU 0 (remove) | CPU 1 (threaded IRQ) ucsi_destroy(uc->ucsi) | ccg_irq_handler() kfree(ucsi) // FREE | ucsi_notify_common(uc->ucsi) // USE Move free_irq() before ucsi_destroy() in the remove path. It is kept after ucsi_unregister(): ucsi_unregister() cancels connector work whose handler issues GET_CONNECTOR_STATUS through ucsi_send_command_common(), which waits for a completion that is signalled from the IRQ handler, so the IRQ must stay active until that work has been cancelled. The probe error path already orders free_irq() before ucsi_destroy(). This bug was found by static analysis.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-64326

block: skip sync_blockdev() on surprise removal in bdev_mark_dead()

In the Linux kernel, the following vulnerability has been resolved: block: skip sync_blockdev() on surprise removal in bdev_mark_dead() bdev_mark_dead()'s @surprise == true means the device is already gone. The filesystem callback fs_bdev_mark_dead() honours this and skips sync_filesystem(), but the bare block device path (no ->mark_dead op) lost its !surprise guard when the holder ->mark_dead callback was wired up (see Fixes), and now calls sync_blockdev() unconditionally, which can hang forever waiting on writeback that can no longer complete. syzkaller hit this via nvme_reset_work()'s "I/O queues lost" path: nvme_mark_namespaces_dead() -> blk_mark_disk_dead() -> bdev_mark_dead(bdev, true) -> sync_blockdev() blocks in folio_wait_writeback(), wedging the reset worker and every task waiting on it. Skip the sync on surprise removal, matching fs_bdev_mark_dead(); invalidate_bdev() still runs. Orderly removal (surprise == false) is unchanged. Found by FuzzNvme(Syzkaller with FEMU fuzzing framework).

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-64325

wifi: mt76: mt7921/mt7925: fix NULL dereference in CSA beacon

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921/mt7925: fix NULL dereference in CSA beacon This patch is based on a BUG as reported by Bongani Hlope at https://lore.kernel.org/all/20260502125824.425d7159@bongani-mini.home.org.za/ When a channel-switch announcement (CSA) beacon is received, cfg80211 queues a wiphy work item that eventually calls mt7921_channel_switch_rx_beacon(). If the station disconnects (or the channel context is otherwise torn down) between the time the work is queued and the time it runs, the driver's dev->new_ctx pointer can already have been cleared to NULL. mt7921_channel_switch_rx_beacon() then dereferences new_ctx unconditionally, triggering a NULL pointer dereference at address 0x0: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:mt7921_channel_switch_rx_beacon+0x1f/0x100 [mt7921_common] The same missing guard exists in mt7925_channel_switch_rx_beacon(), which shares the same code pattern introduced by the same commit. Add an early-return NULL check for dev->new_ctx in both mt7921_channel_switch_rx_beacon() and mt7925_channel_switch_rx_beacon(). When new_ctx is NULL there is no pending channel switch to process, so returning immediately is the correct and safe action. Oops-Analysis: http://oops.fenrus.org/reports/lkml/20260502125824.425d7159@bongani-mini.home.org.za/report.html

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-64321

nvme: target: rdma: fix ndev refcount leak on queue connect

In the Linux kernel, the following vulnerability has been resolved: nvme: target: rdma: fix ndev refcount leak on queue connect nvmet_rdma_queue_connect() calls nvmet_rdma_find_get_device() which acquires a reference on the returned ndev via kref_get(). On the path where the host queue backlog is exceeded and the function returns NVME_SC_CONNECT_CTRL_BUSY, reference of ndev is not released, leaking the kref. Fix this by adding a goto to the existing put_device label before the early return.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-64316

crypto: caam - use print_hex_dump_devel to guard key hex dumps

In the Linux kernel, the following vulnerability has been resolved: crypto: caam - use print_hex_dump_devel to guard key hex dumps Use print_hex_dump_devel() for dumping sensitive key material in *_setkey() and gen_split_key() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG is enabled.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-64310

crypto: ccp - Do not initialize SNP for SEV ioctls

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Do not initialize SNP for SEV ioctls Sashiko notes: > if SEV initialization fails and KVM is actively running normal VMs, could a > userspace process trigger this code path via /dev/sev ioctls (e.g., > SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN > execution for an active VM trigger a general protection fault and crash the > host? sev_move_to_init_state() is called for ioctls requiring only SEV firmware: SEV_PEK_GEN, SEV_PDH_GEN, SEV_PEK_CSR, SEV_PEK_CERT_IMPORT, and SEV_PDH_CERT_EXPORT. After the firmware command, it does SEV_SHUTDOWN on the SEV firmware. Since these commands do not require SNP to be initialized, skip it by calling __sev_platform_init_locked() which only initializes the SEV firmware. This way SNP is not Initialized at all, and HSAVE_PA is not cleared. The previous code saved any SEV initialization firmware error to init_args.error and then threw it away and hardcoded the return value of INVALID_PLATFORM_STATE regardless of the real firmware error. This patch changes it to surface the underlying error, which is hopefully both more useful and doesn't cause any problems. Note that it is still safe to call __sev_firmware_shutdown() directly: it calls __sev_snp_shutdown_locked(), which skips SNP shutdown if SNP was not initialized.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-64309

crypto: ccp - Do not initialize SNP for ioctl(SNP_COMMIT)

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Do not initialize SNP for ioctl(SNP_COMMIT) Sashiko notes: > if SEV initialization fails and KVM is actively running normal VMs, could a > userspace process trigger this code path via /dev/sev ioctls (e.g., > SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN > execution for an active VM trigger a general protection fault and crash the > host? The SNP_COMMIT command does not require the firmware to be in any particular state. Skip initializing it if it was previously uninitialized. The SEV-SNP firmware specification doc 56860 does not mention SNP_COMMIT in Table 5 as a command that is allowed in the UNINIT state, but it is in fact allowed and a future documentation update will reflect that.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-64308

crypto: ccp - Do not initialize SNP for ioctl(SNP_VLEK_LOAD)

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Do not initialize SNP for ioctl(SNP_VLEK_LOAD) Sashiko notes: > if SEV initialization fails and KVM is actively running normal VMs, could a > userspace process trigger this code path via /dev/sev ioctls (e.g., > SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN > execution for an active VM trigger a general protection fault and crash the > host? The SEV firmware docs for SNP_VLEK_LOAD note: > On SNP_SHUTDOWN, the VLEK is deleted. That is, the initialization/shutdown wrapper here is pointless, because the firmware immediately throws away the key anyway. Instead, refuse to do anything if SNP has not been previously initialized. This is an ABI break: before, this was a no-op and almost certainly a mistake by userspace, and now it returns -ENODEV. ABI compatibility could be maintained here by simply returning 0 in the check instead.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel
CVE-2026-64307

crypto: ccp - Do not initialize SNP for ioctl(SNP_CONFIG)

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Do not initialize SNP for ioctl(SNP_CONFIG) Sashiko notes: > if SEV initialization fails and KVM is actively running normal VMs, could a > userspace process trigger this code path via /dev/sev ioctls (e.g., > SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN > execution for an active VM trigger a general protection fault and crash the > host? Refuse to re-try initialization if SNP is not already initialized for SNP_CONFIG. This is technically an ABI break: before if SNP initialization failed it could be transparently retriggered by this ioctl, and if no VMs were running, everything worked fine. Hopefully this is enough of a corner case that nobody will notice, but someone does, there are a few options: * do something like symbol_get() for kvm and refuse to initialize if KVM is loaded * check each cpu's HSAVE_PA for non-zero data before re-initializing * once initialization has failed, continue to refuse to initialize until the ccp module is unloaded

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Linux
Products
Linux Kernel