| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm: call ->free_folio() directly in folio_unmap_invalidate()
We can only call filemap_free_folio() if we have a reference to (or hold a
lock on) the mapping. Otherwise, we've already removed the folio from the
mapping so it no longer pins the mapping and the mapping can be removed,
causing a use-after-free when accessing mapping->a_ops.
Follow the same pattern as __remove_mapping() and load the free_folio
function pointer before dropping the lock on the mapping. That lets us
make filemap_free_folio() static as this was the only caller outside
filemap.c. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Drop WARN on large size for KVM_MEMORY_ENCRYPT_REG_REGION
Drop the WARN in sev_pin_memory() on npages overflowing an int, as the
WARN is comically trivially to trigger from userspace, e.g. by doing:
struct kvm_enc_region range = {
.addr = 0,
.size = -1ul,
};
__vm_ioctl(vm, KVM_MEMORY_ENCRYPT_REG_REGION, &range);
Note, the checks in sev_mem_enc_register_region() that presumably exist to
verify the incoming address+size are completely worthless, as both "addr"
and "size" are u64s and SEV is 64-bit only, i.e. they _can't_ be greater
than ULONG_MAX. That wart will be cleaned up in the near future.
if (range->addr > ULONG_MAX || range->size > ULONG_MAX)
return -EINVAL;
Opportunistically add a comment to explain why the code calculates the
number of pages the "hard" way, e.g. instead of just shifting @ulen. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Lock all vCPUs when synchronzing VMSAs for SNP launch finish
Lock all vCPUs when synchronizing and encrypting VMSAs for SNP guests, as
allowing userspace to manipulate and/or run a vCPU while its state is being
synchronized would at best corrupt vCPU state, and at worst crash the host
kernel.
Opportunistically assert that vcpu->mutex is held when synchronizing its
VMSA (the SEV-ES path already locks vCPUs). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Protect *all* of sev_mem_enc_register_region() with kvm->lock
Take and hold kvm->lock for before checking sev_guest() in
sev_mem_enc_register_region(), as sev_guest() isn't stable unless kvm->lock
is held (or KVM can guarantee KVM_SEV_INIT{2} has completed and can't
rollack state). If KVM_SEV_INIT{2} fails, KVM can end up trying to add to
a not-yet-initialized sev->regions_list, e.g. triggering a #GP
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 110 UID: 0 PID: 72717 Comm: syz.15.11462 Tainted: G U W O 6.16.0-smp-DEV #1 NONE
Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.52.0-0 10/28/2024
RIP: 0010:sev_mem_enc_register_region+0x3f0/0x4f0 ../include/linux/list.h:83
Code: <41> 80 3c 04 00 74 08 4c 89 ff e8 f1 c7 a2 00 49 39 ed 0f 84 c6 00
RSP: 0018:ffff88838647fbb8 EFLAGS: 00010256
RAX: dffffc0000000000 RBX: 1ffff92015cf1e0b RCX: dffffc0000000000
RDX: 0000000000000000 RSI: 0000000000001000 RDI: ffff888367870000
RBP: ffffc900ae78f050 R08: ffffea000d9e0007 R09: 1ffffd4001b3c000
R10: dffffc0000000000 R11: fffff94001b3c001 R12: 0000000000000000
R13: ffff8982ab0bde00 R14: ffffc900ae78f058 R15: 0000000000000000
FS: 00007f34e9dc66c0(0000) GS:ffff89ee64d33000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe180adef98 CR3: 000000047210e000 CR4: 0000000000350ef0
Call Trace:
<TASK>
kvm_arch_vm_ioctl+0xa72/0x1240 ../arch/x86/kvm/x86.c:7371
kvm_vm_ioctl+0x649/0x990 ../virt/kvm/kvm_main.c:5363
__se_sys_ioctl+0x101/0x170 ../fs/ioctl.c:51
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x6f/0x1f0 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f34e9f7e9a9
Code: <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f34e9dc6038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f34ea1a6080 RCX: 00007f34e9f7e9a9
RDX: 0000200000000280 RSI: 000000008010aebb RDI: 0000000000000007
RBP: 00007f34ea000d69 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007f34ea1a6080 R15: 00007ffce77197a8
</TASK>
with a syzlang reproducer that looks like:
syz_kvm_add_vcpu$x86(0x0, &(0x7f0000000040)={0x0, &(0x7f0000000180)=ANY=[], 0x70}) (async)
syz_kvm_add_vcpu$x86(0x0, &(0x7f0000000080)={0x0, &(0x7f0000000180)=ANY=[@ANYBLOB="..."], 0x4f}) (async)
r0 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000200), 0x0, 0x0)
r1 = ioctl$KVM_CREATE_VM(r0, 0xae01, 0x0)
r2 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000240), 0x0, 0x0)
r3 = ioctl$KVM_CREATE_VM(r2, 0xae01, 0x0)
ioctl$KVM_SET_CLOCK(r3, 0xc008aeba, &(0x7f0000000040)={0x1, 0x8, 0x0, 0x5625e9b0}) (async)
ioctl$KVM_SET_PIT2(r3, 0x8010aebb, &(0x7f0000000280)={[...], 0x5}) (async)
ioctl$KVM_SET_PIT2(r1, 0x4070aea0, 0x0) (async)
r4 = ioctl$KVM_CREATE_VM(0xffffffffffffffff, 0xae01, 0x0)
openat$kvm(0xffffffffffffff9c, 0x0, 0x0, 0x0) (async)
ioctl$KVM_SET_USER_MEMORY_REGION(r4, 0x4020ae46, &(0x7f0000000400)={0x0, 0x0, 0x0, 0x2000, &(0x7f0000001000/0x2000)=nil}) (async)
r5 = ioctl$KVM_CREATE_VCPU(r4, 0xae41, 0x2)
close(r0) (async)
openat$kvm(0xffffffffffffff9c, &(0x7f0000000000), 0x8000, 0x0) (async)
ioctl$KVM_SET_GUEST_DEBUG(r5, 0x4048ae9b, &(0x7f0000000300)={0x4376ea830d46549b, 0x0, [0x46, 0x0, 0x0, 0x0, 0x0, 0x1000]}) (async)
ioctl$KVM_RUN(r5, 0xae80, 0x0)
Opportunistically use guard() to avoid having to define a new error label
and goto usage. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: make use of smbdirect_socket.recv_io.credits.available
The logic off managing recv credits by counting posted recv_io and
granted credits is racy.
That's because the peer might already consumed a credit,
but between receiving the incoming recv at the hardware
and processing the completion in the 'recv_done' functions
we likely have a window where we grant credits, which
don't really exist.
So we better have a decicated counter for the
available credits, which will be incremented
when we posted new recv buffers and drained when
we grant the credits to the peer. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: let send_done handle a completion without IB_SEND_SIGNALED
With smbdirect_send_batch processing we likely have requests without
IB_SEND_SIGNALED, which will be destroyed in the final request
that has IB_SEND_SIGNALED set.
If the connection is broken all requests are signaled
even without explicit IB_SEND_SIGNALED. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: make use of smbdirect_socket.send_io.bcredits
It turns out that our code will corrupt the stream of
reassabled data transfer messages when we trigger an
immendiate (empty) send.
In order to fix this we'll have a single 'batch' credit per
connection. And code getting that credit is free to use
as much messages until remaining_length reaches 0, then
the batch credit it given back and the next logical send can
happen. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: make use of smbdirect_socket.recv_io.credits.available
The logic off managing recv credits by counting posted recv_io and
granted credits is racy.
That's because the peer might already consumed a credit,
but between receiving the incoming recv at the hardware
and processing the completion in the 'recv_done' functions
we likely have a window where we grant credits, which
don't really exist.
So we better have a decicated counter for the
available credits, which will be incremented
when we posted new recv buffers and drained when
we grant the credits to the peer.
This fixes regression Namjae reported with
the 6.18 release. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: smbdirect: introduce smbdirect_socket.recv_io.credits.available
The logic off managing recv credits by counting posted recv_io and
granted credits is racy.
That's because the peer might already consumed a credit,
but between receiving the incoming recv at the hardware
and processing the completion in the 'recv_done' functions
we likely have a window where we grant credits, which
don't really exist.
So we better have a decicated counter for the
available credits, which will be incremented
when we posted new recv buffers and drained when
we grant the credits to the peer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gt: Check set_default_submission() before deferencing
When the i915 driver firmware binaries are not present, the
set_default_submission pointer is not set. This pointer is
dereferenced during suspend anyways.
Add a check to make sure it is set before dereferencing.
[ 23.289926] PM: suspend entry (deep)
[ 23.293558] Filesystems sync: 0.000 seconds
[ 23.298010] Freezing user space processes
[ 23.302771] Freezing user space processes completed (elapsed 0.000 seconds)
[ 23.309766] OOM killer disabled.
[ 23.313027] Freezing remaining freezable tasks
[ 23.318540] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 23.342038] serial 00:05: disabled
[ 23.345719] serial 00:02: disabled
[ 23.349342] serial 00:01: disabled
[ 23.353782] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 23.358993] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 23.361635] ata1.00: Entering standby power mode
[ 23.368863] ata2.00: Entering standby power mode
[ 23.445187] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 23.452194] #PF: supervisor instruction fetch in kernel mode
[ 23.457896] #PF: error_code(0x0010) - not-present page
[ 23.463065] PGD 0 P4D 0
[ 23.465640] Oops: Oops: 0010 [#1] SMP NOPTI
[ 23.469869] CPU: 8 UID: 0 PID: 211 Comm: kworker/u48:18 Tainted: G S W 6.19.0-rc4-00020-gf0b9d8eb98df #10 PREEMPT(voluntary)
[ 23.482512] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN
[ 23.496511] Workqueue: async async_run_entry_fn
[ 23.501087] RIP: 0010:0x0
[ 23.503755] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[ 23.510324] RSP: 0018:ffffb4a60065fca8 EFLAGS: 00010246
[ 23.515592] RAX: 0000000000000000 RBX: ffff9f428290e000 RCX: 000000000000000f
[ 23.522765] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff9f428290e000
[ 23.529937] RBP: ffff9f4282907070 R08: ffff9f4281130428 R09: 00000000ffffffff
[ 23.537111] R10: 0000000000000000 R11: 0000000000000001 R12: ffff9f42829070f8
[ 23.544284] R13: ffff9f4282906028 R14: ffff9f4282900000 R15: ffff9f4282906b68
[ 23.551457] FS: 0000000000000000(0000) GS:ffff9f466b2cf000(0000) knlGS:0000000000000000
[ 23.559588] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 23.565365] CR2: ffffffffffffffd6 CR3: 000000031c230001 CR4: 0000000000f70ef0
[ 23.572539] PKRU: 55555554
[ 23.575281] Call Trace:
[ 23.577770] <TASK>
[ 23.579905] intel_engines_reset_default_submission+0x42/0x60
[ 23.585695] __intel_gt_unset_wedged+0x191/0x200
[ 23.590360] intel_gt_unset_wedged+0x20/0x40
[ 23.594675] gt_sanitize+0x15e/0x170
[ 23.598290] i915_gem_suspend_late+0x6b/0x180
[ 23.602692] i915_drm_suspend_late+0x35/0xf0
[ 23.607008] ? __pfx_pci_pm_suspend_late+0x10/0x10
[ 23.611843] dpm_run_callback+0x78/0x1c0
[ 23.615817] device_suspend_late+0xde/0x2e0
[ 23.620037] async_suspend_late+0x18/0x30
[ 23.624082] async_run_entry_fn+0x25/0xa0
[ 23.628129] process_one_work+0x15b/0x380
[ 23.632182] worker_thread+0x2a5/0x3c0
[ 23.635973] ? __pfx_worker_thread+0x10/0x10
[ 23.640279] kthread+0xf6/0x1f0
[ 23.643464] ? __pfx_kthread+0x10/0x10
[ 23.647263] ? __pfx_kthread+0x10/0x10
[ 23.651045] ret_from_fork+0x131/0x190
[ 23.654837] ? __pfx_kthread+0x10/0x10
[ 23.658634] ret_from_fork_asm+0x1a/0x30
[ 23.662597] </TASK>
[ 23.664826] Modules linked in:
[ 23.667914] CR2: 0000000000000000
[ 23.671271] ------------[ cut here ]------------
(cherry picked from commit daa199abc3d3d1740c9e3a2c3e9216ae5b447cad) |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix trace_marker copy link list updates
When the "copy_trace_marker" option is enabled for an instance, anything
written into /sys/kernel/tracing/trace_marker is also copied into that
instances buffer. When the option is set, that instance's trace_array
descriptor is added to the marker_copies link list. This list is protected
by RCU, as all iterations uses an RCU protected list traversal.
When the instance is deleted, all the flags that were enabled are cleared.
This also clears the copy_trace_marker flag and removes the trace_array
descriptor from the list.
The issue is after the flags are called, a direct call to
update_marker_trace() is performed to clear the flag. This function
returns true if the state of the flag changed and false otherwise. If it
returns true here, synchronize_rcu() is called to make sure all readers
see that its removed from the list.
But since the flag was already cleared, the state does not change and the
synchronization is never called, leaving a possible UAF bug.
Move the clearing of all flags below the updating of the copy_trace_marker
option which then makes sure the synchronization is performed.
Also use the flag for checking the state in update_marker_trace() instead
of looking at if the list is empty. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buff size instead
of DMA write size. Different assumptions in ice driver configuration lead
to negative tailroom.
This allows to trigger kernel panic, when using
XDP_ADJUST_TAIL_GROW_MULTI_BUFF xskxceiver test and changing packet size to
6912 and the requested offset to a huge value, e.g.
XSK_UMEM__MAX_FRAME_SIZE * 100.
Due to other quirks of the ZC configuration in ice, panic is not observed
in ZC mode, but tailroom growing still fails when it should not.
Use fill queue buffer truesize instead of DMA write size in XDP RxQ info.
Fix ZC mode too by using the new helper. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/platform/uv: Handle deconfigured sockets
When a socket is deconfigured, it's mapped to SOCK_EMPTY (0xffff). This causes
a panic while allocating UV hub info structures.
Fix this by using NUMA_NO_NODE, allowing UV hub info structures to be
allocated on valid nodes. |
| In the Linux kernel, the following vulnerability has been resolved:
crash_dump: don't log dm-crypt key bytes in read_key_from_user_keying
When debug logging is enabled, read_key_from_user_keying() logs the first
8 bytes of the key payload and partially exposes the dm-crypt key. Stop
logging any key bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: ipc: fix use-after-free in ipc_msg_send_request
ipc_msg_send_request() waits for a generic netlink reply using an
ipc_msg_table_entry on the stack. The generic netlink handler
(handle_generic_event()/handle_response()) fills entry->response under
ipc_msg_table_lock, but ipc_msg_send_request() used to validate and free
entry->response without holding the same lock.
Under high concurrency this allows a race where handle_response() is
copying data into entry->response while ipc_msg_send_request() has just
freed it, leading to a slab-use-after-free reported by KASAN in
handle_generic_event():
BUG: KASAN: slab-use-after-free in handle_generic_event+0x3c4/0x5f0 [ksmbd]
Write of size 12 at addr ffff888198ee6e20 by task pool/109349
...
Freed by task:
kvfree
ipc_msg_send_request [ksmbd]
ksmbd_rpc_open -> ksmbd_session_rpc_open [ksmbd]
Fix by:
- Taking ipc_msg_table_lock in ipc_msg_send_request() while validating
entry->response, freeing it when invalid, and removing the entry from
ipc_msg_table.
- Returning the final entry->response pointer to the caller only after
the hash entry is removed under the lock.
- Returning NULL in the error path, preserving the original API
semantics.
This makes all accesses to entry->response consistent with
handle_response(), which already updates and fills the response buffer
under ipc_msg_table_lock, and closes the race that allowed the UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix NULL dereference on notify error path
Since commit b5daf93b809d1 ("firmware: arm_scmi: Avoid notifier
registration for unsupported events") the call chains leading to the helper
__scmi_event_handler_get_ops expect an ERR_PTR to be returned on failure to
get an handler for the requested event key, while the current helper can
still return a NULL when no handler could be found or created.
Fix by forcing an ERR_PTR return value when the handler reference is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: apple: avoid memory leak in apple_report_fixup()
The apple_report_fixup() function was returning a
newly kmemdup()-allocated buffer, but never freeing it.
The caller of report_fixup() does not take ownership of the returned
pointer, but it *is* permitted to return a sub-portion of the input
rdesc, whose lifetime is managed by the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: ensure we're polling a polled queue
A user can change the polled queue count at run time. There's a brief
window during a reset where a hipri task may try to poll that queue
before the block layer has updated the queue maps, which would race with
the now interrupt driven queue and may cause double completions. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: asus: avoid memory leak in asus_report_fixup()
The asus_report_fixup() function was returning a newly allocated
kmemdup()-allocated buffer, but never freeing it. Switch to
devm_kzalloc() to ensure the memory is managed and freed automatically
when the device is removed.
The caller of report_fixup() does not take ownership of the returned
pointer, but it is permitted to return a pointer whose lifetime is at
least that of the input buffer.
Also fix a harmless out-of-bounds read by copying only the original
descriptor size. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix exception exit lock checking for subprogs
process_bpf_exit_full() passes check_lock = !curframe to
check_resource_leak(), which is false in cases when bpf_throw() is
called from a static subprog. This makes check_resource_leak() to skip
validation of active_rcu_locks, active_preempt_locks, and
active_irq_id on exception exits from subprogs.
At runtime bpf_throw() unwinds the stack via ORC without releasing any
user-acquired locks, which may cause various issues as the result.
Fix by setting check_lock = true for exception exits regardless of
curframe, since exceptions bypass all intermediate frame
cleanup. Update the error message prefix to "bpf_throw" for exception
exits to distinguish them from normal BPF_EXIT.
Fix reject_subprog_with_rcu_read_lock test which was previously
passing for the wrong reason. Test program returned directly from the
subprog call without closing the RCU section, so the error was
triggered by the unclosed RCU lock on normal exit, not by
bpf_throw. Update __msg annotations for affected tests to match the
new "bpf_throw" error prefix.
The spin_lock case is not affected because they are already checked [1]
at the call site in do_check_insn() before bpf_throw can run.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/kernel/bpf/verifier.c?h=v7.0-rc4#n21098 |
