| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Fix condition check in acpi_ps_parse_loop()
Fix condition check for AML_ELSE_OP in acpi_ps_parse_loop() to prevent
out-of-bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: addrconf: fix temp address generation after prefix deprecation
When a router temporarily deprecates an IPv6 prefix (either by sending a
Router Advertisement with Preferred Lifetime = 0 or by letting the
lifetime expire) and later restores it, the kernel permanently loses its
ability to generate temporary privacy addresses (RFC 8981) for that
prefix.
This happens because the address worker attempts to generate a
replacement temporary address when the current one nears expiration. As
the base prefix is deprecated already, the generation fails after
marking the temporary address as already having spawned a replacement
(ifp->regen_count++).
When the router eventually restores the prefix, the temporary address
becomes active again. However, once it naturally expires, the address
worker sees this temporary address already tried to generate one and
skips the regeneration.
Fix the issue by resetting the regen_count check of the latest temp
address generated for the prefix updated by the incoming RA. |
| In the Linux kernel, the following vulnerability has been resolved:
powercap: intel_rapl: Fix memory leak in rapl_add_package_cpuslocked()
When topology_physical_package_id()/topology_logical_die_id() returns
a negative value, rapl_add_package_cpuslocked() returns ERR_PTR(-EINVAL)
directly without freeing the rapl_package structure that was just
allocated by kzalloc_obj(), leaking memory on every failed package
addition.
Use the existing err_free_package label so that the allocation is
released on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
rds: filter RDS_INFO_* getsockopt by caller's netns
The RDS_INFO_* family of getsockopt(2) options reads several
file-scope global lists that are not per-netns:
rds_sock_info / rds6_sock_info,
rds_sock_inc_info / rds6_sock_inc_info -> rds_sock_list
rds_tcp_tc_info / rds6_tcp_tc_info -> rds_tcp_tc_list
rds_conn_info / rds6_conn_info,
rds_conn_message_info_cmn (for the *_SEND_MESSAGES and
*_RETRANS_MESSAGES variants),
rds_for_each_conn_info (for RDS_INFO_IB_CONNECTIONS)
-> rds_conn_hash[]
The handlers do not filter by the caller's network namespace.
rds_info_getsockopt() has no netns or capable() check, and
rds_create() has no capable() check, so AF_RDS is reachable from
an unprivileged user namespace. As a result, an unprivileged
caller in a fresh user_ns plus netns can read the bound address
and sock inode of every RDS socket on the host, the peer address
of incoming messages on every RDS socket on the host, the peer
address and TCP sequence numbers of every rds-tcp connection on
the host, and the peer address and RDS sequence numbers of every
RDS connection on the host.
The rds-tcp transport is reachable from a non-initial netns (see
rds_set_transport()), so a one-shot init_net gate at
rds_info_getsockopt() would deny legitimate per-netns visibility
to rds-tcp callers. Instead, filter at each handler by comparing
the netns of the caller's socket to the netns of the list entry,
or to rds_conn_net(conn) for connection paths. Only copy entries
whose netns matches the caller. Counters (RDS_INFO_COUNTERS) are
aggregate statistics and remain global.
Reproducer (KASAN VM, rds and rds_tcp loaded): an AF_RDS socket
binds 127.0.0.1:4242 in init_net as root. A child process enters
a fresh user_ns plus netns and opens AF_RDS there, then calls
getsockopt(SOL_RDS, RDS_INFO_SOCKETS). Before this change, the
child sees the init_net socket. After this change, the child
sees zero entries.
Drop the rds_sock_count, rds_tcp_tc_count, and rds6_tcp_tc_count
globals. v2 used them for the size precheck and lens->nr; v3
replaced the precheck with a per-ns count from a first pass over
the list, so the globals have no remaining readers. The matching
increments and decrements in rds_create()/rds_destroy_sock() and
rds_tcp_set_callbacks()/rds_tcp_restore_callbacks() go away with
them. Reported by the kernel test robot under clang W=1. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/counter: Fix num_counters leak on bind_qp failure in alloc_and_bind()
When __rdma_counter_bind_qp() fails in alloc_and_bind(), the error path
jumps to err_mode which frees the counter without decrementing
port_counter->num_counters. The only place that decrements is
rdma_counter_free(), which is unreachable since the counter was never
successfully bound.
This leak accumulates across repeated failures, permanently preventing
the port from switching to AUTO mode (-EBUSY in __counter_set_mode())
and blocking the MANUAL→NONE auto-revert in rdma_counter_free(). When
the mode was NONE before the call, the MANUAL mode set by
__counter_set_mode() also leaks since the revert logic is never
reached.
Add an err_bind label between the num_counters increment and the
existing err_mode label. It decrements num_counters and mirrors the
MANUAL→NONE revert from rdma_counter_free(), ensuring the port state
is fully restored on bind failure. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: core: hcd: fix possible deadlock in rh control transfers
>From within the SCSI error handler memory allocations must not
trigger IO. Handling errors in UAS and the storage driver may
involve resetting a device. The thread doing the reset itself
relies on VM magic. However, that is insufficient, as resetting
a device involves resuming it. Resumption as well as resetting
involves conrol transfers to the parent of the device to be reset.
That may be a root hub. Hence usbcore must heed the flags passed
to usb_submit_urb() processing control transfers to root hubs.
The problem exist since the storage driver has been merged. |
| In the Linux kernel, the following vulnerability has been resolved:
affs: handle set_blocksize failures
affs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call. |
| In the Linux kernel, the following vulnerability has been resolved:
qnx4: handle set_blocksize failures
qnx4 uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Check bounds for allocate_sdma_queue restore_sdma_id
allocate_sdma_queue has an option where the sdma queue id can be
specified (used by CRIU). We weren't bounds-checking that
value.
Confirm it's less than the maximum number of queues. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: Don't sleep inside rds_ib_conn_path_shutdown
New rds rdma self tests exposed a hang when tearing down
the ib network configs. This is caused by the shutdown worker
thread sleeping on the wait_event call, which blocks other work
items in the queue. Fix this by changing wait_event to
wait_event timeout, and looping until the wait check succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't call ieee80211_handle_reconfig_failure when not needed
In case reconfiguration of NAN fails, we call
ieee80211_handle_reconfig_failure, that marks all interfaces as not in
the driver.
Then, at the error path of the reconfig, cfg80211_shutdown_all_interfaces
is called to destroy all the interfaces.
If we have any other interface but the NAN one, for example a BSS
station, then when its state (links, stations) will be removed, we
won't tell the driver about this, because we will think that the
interfaces are not in the driver, and then drivers might remain with
dangling pointers to objects like stations and links (at least for
iwlwifi this is the case).
ieee80211_handle_reconfig_failure is meant to be called after we cleaned
up the state in the driver, there is no reason to call it for NAN
reconfiguration failure.
Fix the code to just warn in such a case, as we do in other error paths
in reconfig where it is too complicated to rewind. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Bound GPIO I2C table entry count from VBIOS
Reject undersized tables and cap the derived entry count
to AMDGPU_MAX_I2C_BUS so we do not overrun adev->i2c_bus[]
or walk an absurd number of entries on corrupt size fields. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: avoid out-of-bounds access in monitor
In NAN, we don't know on what band the frame will be sent. Therefore we
set info->band to NUM_NL80211_BANDS. However, this leads to out-of-bound
access in ieee80211_add_tx_radiotap_header when we try to access the
sbands array.
Fix it by not accessing the array if the band is NUM_NL80211_BANDS.
This means that we will not report rate info for legacy rate in NAN.
But nobody really cares about it. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/pat: Acquire init_mm read lock on attribute changes to avoid UAF
A previous commit protected against races between ptdump and CPA collapse,
however one still exists between attribute changes and collapse as reported
by Denis V. Lunev (linked).
When an attribute change arises, a lockless page table walker obtains a PTE
entry, which is later written to via set_pte_atomic():
...
-> change_page_attr_set_clr()
-> __change_page_attr_set_clr()
-> __change_page_attr()
-> _lookup_address_cpa()
-> lookup_address_in_pgd_attr()
-> [ lockless page table walker ]
-> set_pte_atomic()
There is nothing preventing a concurrent CPA collapse which can free the
PTE that was retrieved here, resulting in a use-after-free.
With the mmap write lock taken on init_mm over CPA collapse, resolve this
race by acquiring an mmap read lock on init_mm over
__change_page_attr_set_clr().
This locks across the whole operation over which the walk and the PTE
entry write occurs, solving the race.
It is safe to do this here, as no spinlocks are held upon entry to
__change_page_attr_set_clr().
However, the lock must not be held over an allocation, as allocation can
trigger reclaim and shrinkers may call into CPA recursively, making
deadlocks possible (init_mm -> ... -> fs_reclaim -> init_mm).
A page table is allocated when a huge page needs to be split:
-> change_page_attr_set_clr()
-> __change_page_attr_set_clr()
-> __change_page_attr()
-> split_large_page()
[ pagetable_alloc() ]
-> __split_large_page()
Avoid deadlocks by dropping the mmap lock across pagetable_alloc() in
split_large_page() and track whether this is needed by adding a new
'init_mm_read_locked' flag to struct cpa_data.
This is safe as __split_large_page() (called with locks re-established)
revalidates that the page table entry is the same as it was prior to the
locks being dropped and __change_page_attr() repeats the entire page table
walk whenever a split occurs, so concurrent split and collapse are
accounted for.
Concurrent ptdump is also safe as the lock is only dropped over page table
allocation during which time the page table has not yet been modified.
The CPA_COLLAPSE flag is only set by set_memory_rox(), which exclusively
operates upon vmalloc ranges, and on x86 only within the module mapping
space.
This is important, because some callers directly invoke
__change_page_attr_set_clr(), bypassing this lock. However, none of these
operate within the module mapping space.
* cpa_process_alias() - a recursive helper called by
__change_page_attr_set_clr().
* __set_memory_enc_pgtable() - operates on the direct mapping and (via
__vmbus_establish_gpadl()) the vmalloc mapping space.
* __set_pages_[n]p() - called by set_direct_map_[invalid, default,
valid]_noflush(), __kernel_map_pages() - operates on the direct map.
* kernel_[un]map_pages_in_pgd() - operates on EFI ranges.
This work is based upon Denis V. Lunev's excellent analysis of the bug
with gratitude.
[ dhansen: move to imperative voice in changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Check bounds on allocate_doorbell
allocated_doorbell has an option to set the doorbell id
to a specific value (used by CRIU). This value was not
bounds checked.
Check to confirm it's less than KFD_MAX_NUM_OF_QUEUES_PER_PROCESS. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix OOB memory exposure in get_wave_state()
The get_wave_state() function for v9 trusts cp_hqd_cntl_stack_size and
cp_hqd_cntl_stack_offset values read directly from the MQD, which are
written by GPU microcode and fully attacker-controlled on the
CRIU-restore path (via AMDKFD_IOC_RESTORE_PROCESS with H3).
this leads to an unbounded copy_to_user() that can leak adjacent
GTT/kernel memory. If offset > size, integer underflow produces a ~4 GiB
read length, if size is set to 1 MiB against a 4 KiB allocation, we leak
1 MiB of adjacent kernel memory (other queues' MQDs, ring buffers, KASLR
pointers).
Fix by clamping both cp_hqd_cntl_stack_size to the actual allocated
buffer size (q->ctl_stack_size) and cp_hqd_cntl_stack_offset to the
clamped size before performing arithmetic and copy_to_user().
This ensures we never read beyond the allocated kernel BO regardless of
attacker-supplied MQD field values. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/pat: Allocate split page tables as kernel page tables
A PTE is allocated directly without going through the standard page table
allocation routines (such as pte_alloc_one_kernel()) when the CPA code
splits a large page (__split_large_page()).
This means the page table constructor is never called nor is the page table
marked as a kernel page table.
The former results in the folio associated with the page table not being
marked as a page table (__pagetable_ctor() is never called thus neither is
__folio_set_pgtable()) nor are statistics updated to reflect
it (lruvec_stat_add_folio() is never called).
The latter issue of failing to mark the page table as a kernel page
table (ptdesc_set_kernel() is never called) is far more problematic.
Since commit:
5ba2f0a15564 ("mm: introduce deferred freeing for kernel page tables")
kernel page table freeing has been batched and since the
subsequent commit:
e37d5a2d60a3 ("iommu/sva: invalidate stale IOTLB entries for kernel address space")
IOTLB cache entries for kernel page tables have been invalidated upon
being freed.
Since split page tables are freed without this invalidation, the IOTLB
can contain stale entries for them.
Resolve the issue by using the ordinary PTE allocation API at split time.
This results in these kernel page tables invoking a page table constructor,
and thus requires a page table destructor.
Destructors are not always present, like for early allocated direct map
page tables). Conditionally call pagetable_dtor_free() if the PG_table
folio flag for the ptdesc is set, otherwise we free the page table via
pagetable_free().
Regardless of which path is taken page tables marked as kernel page tables,
which now includes split page tables, take the correct route through
pagetable_free_kernel().
There is a user-visible side effect in that split page tables will appear
in nr_page_table_pages in /proc/vmstat (as do other kernel page tables
allocated after early boot), however this is a positive change.
This issue started being markedly problematic after commit:
5ba2f0a15564 ("mm: introduce deferred freeing for kernel page tables")
so choose this as the Fixes target.
[ dhansen: rephrase in imperative mood ] |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: mediatek: paris: bypass pinctrl GPIO layer in set GPIO direction
pinctrl_gpio_direction_input() / pinctrl_gpio_direction_output() take
the pinctrl mutex. This causes a gpiochip operations to need to sleep.
Worse yet, the .can_sleep field in the gpiochip is not set. This causes
the shared GPIO proxy to trip over, as it uses gpiod_cansleep() to check
whether it can use a spinlock or needs a mutex. In this case, it ends
up taking a spinlock, then calls pinctrl_gpio_direction_output(), which
takes a mutex. This causes a huge warning.
While this class of Mediatek hardware does not have separate clear/set
registers, the pinctrl context has a spinlock that is taken whenever
a register read-modify-write is done. Also, once the GPIO function is
selected / muxed in, further GPIO operations do not involve pinctrl
operations or state. The GPIO direction and level values do not require
toggling the pinmux or any other pin config options.
Switch to directly calling mtk_pinmux_gpio_set_direction() in the GPIO
set direction callbacks to avoid taking the pinctrl mutex. Drop the
.gpio_set_direction field in mtk_pmxops to signal we are no longer using
the pinctrl GPIO layer for setting the direction. |
| In the Linux kernel, the following vulnerability has been resolved:
genirq/proc: Size interrupt directory names for 10-digit interrupt numbers
/proc/irq/<n>/ directory names are built in `char name[10]` buffers
with `sprintf(name, "%u", irq)`.
Ten-digit IRQ numbers already need 11 bytes including the trailing NUL, and
current sparse-IRQ configurations allow interrupt numbers in that range.
Size the temporary name buffer for the current decimal form and switch
to bounded formatting when creating or removing the proc entry. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: lenovo_se10_wdt: Fix use-after-free and resource leak risk
Review by sashiko.dev highlighted potential use after free and resource
leak instances.
Set se10_pdev to null to prevent use after free
Remove DMI call back and instead directly call
se10_create_platform_device. Handle error cases appropriately |
