| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was determined in Totolink WA300 5.2cu.7112_B20190227. This issue affects the function UploadCustomModule of the file /cgi-bin/cstecgi.cgi of the component POST Request Handler. Executing a manipulation of the argument File can lead to buffer overflow. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. |
| A vulnerability was detected in Totolink N300RH 3.2.4-B20220812. This vulnerability affects the function setMacFilterRules of the file /cgi-bin/cstecgi.cgi of the component POST Request Handler. The manipulation of the argument mac_address results in buffer overflow. The attack may be launched remotely. The exploit is now public and may be used. |
| A weakness has been identified in Totolink N300RH 3.2.4-B20220812. Affected by this issue is the function setUpgradeFW of the file /cgi-bin/cstecgi.cgi of the component POST Request Handler. Executing a manipulation of the argument FileName can lead to buffer overflow. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. |
| A security flaw has been discovered in Totolink WA300 5.2cu.7112_B20190227. The affected element is the function loginauth of the file /cgi-bin/cstecgi.cgi of the component POST Request Handler. The manipulation of the argument http_host results in buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: ignore explicit helper on new expectations
Use the existing master conntrack helper, anything else is not really
supported and it just makes validation more complicated, so just ignore
what helper userspace suggests for this expectation.
This was uncovered when validating CTA_EXPECT_CLASS via different helper
provided by userspace than the existing master conntrack helper:
BUG: KASAN: slab-out-of-bounds in nf_ct_expect_related_report+0x2479/0x27c0
Read of size 4 at addr ffff8880043fe408 by task poc/102
Call Trace:
nf_ct_expect_related_report+0x2479/0x27c0
ctnetlink_create_expect+0x22b/0x3b0
ctnetlink_new_expect+0x4bd/0x5c0
nfnetlink_rcv_msg+0x67a/0x950
netlink_rcv_skb+0x120/0x350
Allowing to read kernel memory bytes off the expectation boundary.
CTA_EXPECT_HELP_NAME is still used to offer the helper name to userspace
via netlink dump. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq
The wacom_intuos_bt_irq() function processes Bluetooth HID reports
without sufficient bounds checking. A maliciously crafted short report
can trigger an out-of-bounds read when copying data into the wacom
structure.
Specifically, report 0x03 requires at least 22 bytes to safely read
the processed data and battery status, while report 0x04 (which
falls through to 0x03) requires 32 bytes.
Add explicit length checks for these report IDs and log a warning if
a short report is received. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: Mitigate potential OOB by removing bogus memset()
The memset() in hid_report_raw_event() has the good intention of
clearing out bogus data by zeroing the area from the end of the incoming
data string to the assumed end of the buffer. However, as we have
previously seen, doing so can easily result in OOB reads and writes in
the subsequent thread of execution.
The current suggestion from one of the HID maintainers is to remove the
memset() and simply return if the incoming event buffer size is not
large enough to fill the associated report.
Suggested-by Benjamin Tissoires <bentiss@kernel.org>
[bentiss: changed the return value] |
| In the Linux kernel, the following vulnerability has been resolved:
HID: multitouch: Check to ensure report responses match the request
It is possible for a malicious (or clumsy) device to respond to a
specific report's feature request using a completely different report
ID. This can cause confusion in the HID core resulting in nasty
side-effects such as OOB writes.
Add a check to ensure that the report ID in the response, matches the
one that was requested. If it doesn't, omit reporting the raw event and
return early. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86: Fix potential bad container_of in intel_pmu_hw_config
Auto counter reload may have a group of events with software events
present within it. The software event PMU isn't the x86_hybrid_pmu and
a container_of operation in intel_pmu_set_acr_caused_constr (via the
hybrid helper) could cause out of bound memory reads. Avoid this by
guarding the call to intel_pmu_set_acr_caused_constr with an
is_x86_event check. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: move wake reason storage into validated event handlers
hci_store_wake_reason() is called from hci_event_packet() immediately
after stripping the HCI event header but before hci_event_func()
enforces the per-event minimum payload length from hci_ev_table.
This means a short HCI event frame can reach bacpy() before any bounds
check runs.
Rather than duplicating skb parsing and per-event length checks inside
hci_store_wake_reason(), move wake-address storage into the individual
event handlers after their existing event-length validation has
succeeded. Convert hci_store_wake_reason() into a small helper that only
stores an already-validated bdaddr while the caller holds hci_dev_lock().
Use the same helper after hci_event_func() with a NULL address to
preserve the existing unexpected-wake fallback semantics when no
validated event handler records a wake address.
Annotate the helper with __must_hold(&hdev->lock) and add
lockdep_assert_held(&hdev->lock) so future call paths keep the lock
contract explicit.
Call the helper from hci_conn_request_evt(), hci_conn_complete_evt(),
hci_sync_conn_complete_evt(), le_conn_complete_evt(),
hci_le_adv_report_evt(), hci_le_ext_adv_report_evt(),
hci_le_direct_adv_report_evt(), hci_le_pa_sync_established_evt(), and
hci_le_past_received_evt(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ti-adc161s626: use DMA-safe memory for spi_read()
Add a DMA-safe buffer and use it for spi_read() instead of a stack
memory. All SPI buffers must be DMA-safe.
Since we only need up to 3 bytes, we just use a u8[] instead of __be16
and __be32 and change the conversion functions appropriately. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate doorbell_offset in user queue creation
amdgpu_userq_get_doorbell_index() passes the user-provided
doorbell_offset to amdgpu_doorbell_index_on_bar() without bounds
checking. An arbitrarily large doorbell_offset can cause the
calculated doorbell index to fall outside the allocated doorbell BO,
potentially corrupting kernel doorbell space.
Validate that doorbell_offset falls within the doorbell BO before
computing the BAR index, using u64 arithmetic to prevent overflow.
(cherry picked from commit de1ef4ffd70e1d15f0bf584fd22b1f28cbd5e2ec) |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: require minimum ACE size in smb_check_perm_dacl()
Both ACE-walk loops in smb_check_perm_dacl() only guard against an
under-sized remaining buffer, not against an ACE whose declared
`ace->size` is smaller than the struct it claims to describe:
if (offsetof(struct smb_ace, access_req) > aces_size)
break;
ace_size = le16_to_cpu(ace->size);
if (ace_size > aces_size)
break;
The first check only requires the 4-byte ACE header to be in bounds;
it does not require access_req (4 bytes at offset 4) to be readable.
An attacker who has set a crafted DACL on a file they own can declare
ace->size == 4 with aces_size == 4, pass both checks, and then
granted |= le32_to_cpu(ace->access_req); /* upper loop */
compare_sids(&sid, &ace->sid); /* lower loop */
reads access_req at offset 4 (OOB by up to 4 bytes) and ace->sid at
offset 8 (OOB by up to CIFS_SID_BASE_SIZE + SID_MAX_SUB_AUTHORITIES
* 4 bytes).
Tighten both loops to require
ace_size >= offsetof(struct smb_ace, sid) + CIFS_SID_BASE_SIZE
which is the smallest valid on-wire ACE layout (4-byte header +
4-byte access_req + 8-byte sid base with zero sub-auths). Also
reject ACEs whose sid.num_subauth exceeds SID_MAX_SUB_AUTHORITIES
before letting compare_sids() dereference sub_auth[] entries.
parse_sec_desc() already enforces an equivalent check (lines 441-448);
smb_check_perm_dacl() simply grew weaker validation over time.
Reachability: authenticated SMB client with permission to set an ACL
on a file. On a subsequent CREATE against that file, the kernel
walks the stored DACL via smb_check_perm_dacl() and triggers the
OOB read. Not pre-auth, and the OOB read is not reflected to the
attacker, but KASAN reports and kernel state corruption are
possible. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: validate the whole DACL before rewriting it in cifsacl
build_sec_desc() and id_mode_to_cifs_acl() derive a DACL pointer from a
server-supplied dacloffset and then use the incoming ACL to rebuild the
chmod/chown security descriptor.
The original fix only checked that the struct smb_acl header fits before
reading dacl_ptr->size or dacl_ptr->num_aces. That avoids the immediate
header-field OOB read, but the rewrite helpers still walk ACEs based on
pdacl->num_aces with no structural validation of the incoming DACL body.
A malicious server can return a truncated DACL that still contains a
header, claims one or more ACEs, and then drive
replace_sids_and_copy_aces() or set_chmod_dacl() past the validated
extent while they compare or copy attacker-controlled ACEs.
Factor the DACL structural checks into validate_dacl(), extend them to
validate each ACE against the DACL bounds, and use the shared validator
before the chmod/chown rebuild paths. parse_dacl() reuses the same
validator so the read-side parser and write-side rewrite paths agree on
what constitutes a well-formed incoming DACL. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate num_aces and harden ACE walk in smb_inherit_dacl()
smb_inherit_dacl() trusts the on-disk num_aces value from the parent
directory's DACL xattr and uses it to size a heap allocation:
aces_base = kmalloc(sizeof(struct smb_ace) * num_aces * 2, ...);
num_aces is a u16 read from le16_to_cpu(parent_pdacl->num_aces)
without checking that it is consistent with the declared pdacl_size.
An authenticated client whose parent directory's security.NTACL is
tampered (e.g. via offline xattr corruption or a concurrent path that
bypasses parse_dacl()) can present num_aces = 65535 with minimal
actual ACE data. This causes a ~8 MB allocation (not kzalloc, so
uninitialized) that the subsequent loop only partially populates, and
may also overflow the three-way size_t multiply on 32-bit kernels.
Additionally, the ACE walk loop uses the weaker
offsetof(struct smb_ace, access_req) minimum size check rather than
the minimum valid on-wire ACE size, and does not reject ACEs whose
declared size is below the minimum.
Reproduced on UML + KASAN + LOCKDEP against the real ksmbd code path.
A legitimate mount.cifs client creates a parent directory over SMB
(ksmbd writes a valid security.NTACL xattr), then the NTACL blob on
the backing filesystem is rewritten to set num_aces = 0xFFFF while
keeping the posix_acl_hash bytes intact so ksmbd_vfs_get_sd_xattr()'s
hash check still passes. A subsequent SMB2 CREATE of a child under
that parent drives smb2_open() into smb_inherit_dacl() (share has
"vfs objects = acl_xattr" set), which fails the page allocator:
WARNING: mm/page_alloc.c:5226 at __alloc_frozen_pages_noprof+0x46c/0x9c0
Workqueue: ksmbd-io handle_ksmbd_work
__alloc_frozen_pages_noprof+0x46c/0x9c0
___kmalloc_large_node+0x68/0x130
__kmalloc_large_node_noprof+0x24/0x70
__kmalloc_noprof+0x4c9/0x690
smb_inherit_dacl+0x394/0x2430
smb2_open+0x595d/0xabe0
handle_ksmbd_work+0x3d3/0x1140
With the patch applied the added guard rejects the tampered value
with -EINVAL before any large allocation runs, smb2_open() falls back
to smb2_create_sd_buffer(), and the child is created with a default
SD. No warning, no splat.
Fix by:
1. Validating num_aces against pdacl_size using the same formula
applied in parse_dacl().
2. Replacing the raw kmalloc(sizeof * num_aces * 2) with
kmalloc_array(num_aces * 2, sizeof(...)) for overflow-safe
allocation.
3. Tightening the per-ACE loop guard to require the minimum valid
ACE size (offsetof(smb_ace, sid) + CIFS_SID_BASE_SIZE) and
rejecting under-sized ACEs, matching the hardening in
smb_check_perm_dacl() and parse_dacl().
v1 -> v2:
- Replace the synthetic test-module splat in the changelog with a
real-path UML + KASAN reproduction driven through mount.cifs and
SMB2 CREATE; Namjae flagged the kcifs3_test_inherit_dacl_old name
in v1 since it does not exist in ksmbd.
- Drop the commit-hash citation from the code comment per Namjae's
review; keep the parse_dacl() pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: reject oversized dirents in page cache
fuse_add_dirent_to_cache() computes a serialized dirent size from the
server-controlled namelen field and copies the dirent into a single
page-cache page. The existing logic only checks whether the dirent fits
in the remaining space of the current page and advances to a fresh page
if not. It never checks whether the dirent itself exceeds PAGE_SIZE.
As a result, a malicious FUSE server can return a dirent with
namelen=4095, producing a serialized record size of 4120 bytes. On 4 KiB
page systems this causes memcpy() to overflow the cache page by 24 bytes
into the following kernel page.
Reject dirents that cannot fit in a single page before copying them into
the readdir cache. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Fix missing SPDIFI1 index handling
SPDIF1 DAIO type isn't properly handled in daio_device_index() for
hw20k2, and it returned -EINVAL, which ended up with the out-of-bounds
array access. Follow the hw20k1 pattern and return the proper index
for this type, too. |
| IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 for Linux, UNIX and Windows (includes Db2 Connect Server) could allow an authenticated user to cause a denial of service due to improper neutralization of special elements in data query logic. |
| A heap-based buffer overflow in the Kerberos hash parser in hashcat v7.1.2 allows an attacker to cause a denial of service or possibly execute arbitrary code via a crafted Kerberos hash file. The issue affects module_hash_decode in multiple Kerberos-related modules because account_info_len is calculated from untrusted delimiter positions without upper-bound validation before memcpy copies the data into a fixed-size account_info buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: validate ND option lengths in vxlan_na_create
vxlan_na_create() walks ND options according to option-provided
lengths. A malformed option can make the parser advance beyond the
computed option span or use a too-short source LLADDR option payload.
Validate option lengths against the remaining NS option area before
advancing, and only read source LLADDR when the option is large enough
for an Ethernet address. |
