| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM PowerVM Hypervisor FW1120.00 through FW1120.01, FW1110.00 through FW1110.31, and FW1060.00 through FW1060.81 is affected by a vulnerability in a hypervisor call interface. An attacker with root access to a guest partition can read a limited amount of hypervisor memory, potentially exposing sensitive data belonging to the hypervisor or other guest partitions hosted on the same system, resulting in a confidentiality impact. The attacker has no control over which memory contents are returned. This vulnerability is of particular concern in multi-tenant environments where guests may run arbitrary OS images. |
| UI misrepresentation in Omnibox in Google Chrome on on Android prior to 154.0.8037.57 allowed a remote attacker to spoof address bar via a crafted HTML page. (Chromium security severity: Low) |
| Use of uninitialized variable in Tint in Google Chrome on on Android prior to 154.0.8037.57 allowed a remote attacker to read memory outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| UI misrepresentation in Messages in Google Chrome on on Android prior to 154.0.8037.57 allowed a remote attacker leveraging social engineering to potentially spoof UI elements via a crafted HTML page. (Chromium security severity: Medium) |
| UI misrepresentation in Payments in Google Chrome on on Android prior to 154.0.8037.57 allowed a remote attacker to spoof UI elements via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
eth: nfp: drop the replaced rule from the list when reprogramming fails
nfp_net_fs_add() replaces an existing rule by deleting it from the
hardware, decrementing nn->fs.count and programming the new one. If
nfp_net_fs_add_hw() fails the old entry stays on nn->fs.list - only the
success path reaches list_replace() - so the list is one longer than
nn->fs.count, and it advertises a rule whose hardware entry has already
been torn down.
nn->fs.count is what ETHTOOL_GRXCLSRLCNT reports, so userspace then sizes
its buffer one entry short of what the GRXCLSRLALL walk wants to write.
That used to overwrite one u32 past the allocation; since the walk is
bounded it is a permanent -EMSGSIZE instead, as nothing ever resyncs the
counter. |
| A flaw has been found in ag-ui-protocol ag-ui up to 2026-09-07. This vulnerability affects the function FilterToolCallsMiddleware of the file sdks/typescript/packages/client/src/middleware/filter-tool-calls.ts of the component Middleware. Executing a manipulation can lead to incomplete cleanup. The attack may be launched remotely. Upgrading to version 2026-09-08 is able to resolve this issue. This patch is called c346119fe870b70f5c19738ee5119f3e1456e59d. It is suggested to upgrade the affected component. |
| Axios is a promise-based HTTP client for the browser and Node.js. From 0.27.2 until 0.34.0 and 1.20.0, Axios default-instance requests that omit an explicit method can read an inherited method value from Object.prototype. If another vulnerability in the same process pollutes Object.prototype.method, calls such as axios.request({ url }) and axios({ url }) can send a state-changing HTTP method instead of the expected default GET. Axios does not create the prototype pollution source. This is a read-side gadget in axios request dispatch. This issue is fixed in version 0.34.0 and 1.20.0. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: fix potential use of uninitialized apm_filtered bitmap
The DECLARE_BITMAP(apm_filtered, AP_DEVICES) macro allocates the bitmap
on the stack without zero-initializing it.
In vfio_ap_mdev_hot_plug_cfg(), the vfio_ap_mdev_filter_matrix() function
is only called to initialize and populate apm_filtered if either
filter_adapters or filter_domains is true. If the hot plug configuration
change only adds control domains (meaning filter_cdoms is true, but
filter_adapters and filter_domains are both false),
vfio_ap_mdev_filter_matrix() is bypassed.
Consequently, apm_filtered is passed to reset_queues_for_apids() with
uninitialized stack garbage. This can cause reset_queues_for_apids() to
interpret arbitrary stack garbage bits as valid APIDs to reset, potentially
performing unintended guest hardware queue resets.
Fix this by zero-initializing the apm_filtered bitmap at the beginning of
vfio_ap_mdev_hot_plug_cfg() using bitmap_zero(). |
| In the Linux kernel, the following vulnerability has been resolved:
spi: amlogic-spisg: Make sure clk_init_data is fully initialized
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
aml_spisg_clk_init() fills in init.parent_data, and assumes that
init.parent_names is NULL. However, the latter in uninitialized, and
thus may cause a crash.
Make sure all members are fully initialized, to fix such bugs, and to
avoid future breakage when converting drivers to a different method for
specifying the parents. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: renesas: phy-rcar-gen3-usb2: Fix devm action registration for disabled VBUS regulator
devm_regulator_get_exclusive() initialises the regulator with
enable_count = 1, requiring the consumer to disable it before release.
The devm disable action was previously only registered when the caller
explicitly requested enable, so when the regulator was left in its initial
enabled state without an explicit enable call, the cleanup path skipped
decrementing enable_count, triggering a WARN_ON during regulator
release on device removal.
Fix this by always registering the devm disable action based on the actual
enabled state via regulator_is_enabled(), regardless of whether the
caller requested an explicit enable. This covers both the explicitly
enabled case and the initial state set by devm_regulator_get_exclusive(). |
| An address bar spoofing issue in affected versions of Arc could allow an attacker to spoof the browser address bar via a <select> element that triggers requestFullscreen without displaying the fullscreen notification. |
| Arc Search for Android before version 1.12.10 does not display a fullscreen notification when a page enters fullscreen mode while the app is running in the background. A remote attacker can exploit this via a specially crafted website to render fake UI elements, such as a spoofed address bar, misleading the user about the origin of displayed content and increasing the risk of phishing. |
| Incomplete cleanup vulnerability in Apache Tomcat allows a malformed request to potentially (depends on timing) cause one request from another user to fail.
This issue affects Apache Tomcat: from 11.0.19 through 11.0.25, from 10.1.53 through 10.1.59, from 9.0.116 through 9.0.121.
Users are recommended to upgrade to version 11.0.26, 10.1.60 or 9.0.122, which fix the issue. |
| libxls through version 1.6.3 contains a use of uninitialized memory vulnerability in the OLE container parser. Memory allocated for the Master Sector Allocation Table (MSAT) in read_MSAT() is not fully initialized before being consumed by ole2_validate_sector_chain(), which may result in application crashes or potential information disclosure when processing a crafted XLS file |
| The 'podman quadlet install --replace' command opens the existing destination file with O_CREATE|O_WRONLY but omits O_TRUNC. When the initial reflink copy attempt fails (common on non-reflink-capable filesystems including many RHEL default XFS configurations), the fallback in ReflinkOrCopy uses io.Copy which performs a non-truncating write. If the original Quadlet is larger than the new Quadlet, the file is not truncated and content from the original is preserved. The command completes with no warning.
There is no risk of information leakage as the user already had access to the Quadlet in order to replace it, and in most cases, this would only lead to invalid Quadlet files. However, security-related options from the end of the old Quadlet could be included in the new Quadlet, and if the truncation resulted in a valid Quadlet file, this could result in undesirable behavior. For example, running podman quadlet install --replace to remove a single line from the end of a Quadlet - including security-sensitive content, like AddCapability - will fail, and the option will continue to be used. Further, with Volume Quadlets, this can include additional mounts which can cause content to be unintentionally exposed into containers. If, later, the image is updated then compromised content might be leaked to an attacker.
The vulnerable code paths are in pkg/domain/infra/abi/quadlet.go (lines 338-360, O_CREATE|O_WRONLY without O_TRUNC) and vendor/go.podman.io/storage/pkg/fileutils/reflink_linux.go (lines 12-19, non-truncating io.Copy fallback). |
| A vulnerability was found in Golang FIPS OpenSSL. This flaw allows a malicious user to randomly cause an uninitialized buffer length variable with a zeroed buffer to be returned in FIPS mode. It may also be possible to force a false positive match between non-equal hashes when comparing a trusted computed hmac sum to an untrusted input sum if an attacker can send a zeroed buffer in place of a pre-computed sum. It is also possible to force a derived key to be all zeros instead of an unpredictable value. This may have follow-on implications for the Go TLS stack. |
| An uninitialized memory issue was addressed with improved memory initialization. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7, tvOS 27, visionOS 27, watchOS 27. Processing a maliciously crafted image may result in disclosure of process memory. |
| A memory initialization issue was addressed with improved memory handling. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7, tvOS 27, visionOS 27, watchOS 27. An app may be able to determine kernel memory layout. |
| In multiple locations, there is a possible information disclosure due to uninitialized memory use. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. |
