| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: set dormant flag on hook register failure
We need to set the dormant flag again if we fail to register
the hooks.
During memory pressure hook registration can fail and we end up
with a table marked as active but no registered hooks.
On table/base chain deletion, nf_tables will attempt to unregister
the hook again which yields a warn splat from the nftables core. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: free rx_data_reassembly skb on NCI device cleanup
rx_data_reassembly skb is stored during NCI data exchange for processing
fragmented packets. It is dropped only when the last fragment is processed
or when an NTF packet with NCI_OP_RF_DEACTIVATE_NTF opcode is received.
However, the NCI device may be deallocated before that which leads to skb
leak.
As by design the rx_data_reassembly skb is bound to the NCI device and
nothing prevents the device to be freed before the skb is processed in
some way and cleaned, free it on the NCI device cleanup.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
net: veth: clear GRO when clearing XDP even when down
veth sets NETIF_F_GRO automatically when XDP is enabled,
because both features use the same NAPI machinery.
The logic to clear NETIF_F_GRO sits in veth_disable_xdp() which
is called both on ndo_stop and when XDP is turned off.
To avoid the flag from being cleared when the device is brought
down, the clearing is skipped when IFF_UP is not set.
Bringing the device down should indeed not modify its features.
Unfortunately, this means that clearing is also skipped when
XDP is disabled _while_ the device is down. And there's nothing
on the open path to bring the device features back into sync.
IOW if user enables XDP, disables it and then brings the device
up we'll end up with a stray GRO flag set but no NAPI instances.
We don't depend on the GRO flag on the datapath, so the datapath
won't crash. We will crash (or hang), however, next time features
are sync'ed (either by user via ethtool or peer changing its config).
The GRO flag will go away, and veth will try to disable the NAPIs.
But the open path never created them since XDP was off, the GRO flag
was a stray. If NAPI was initialized before we'll hang in napi_disable().
If it never was we'll crash trying to stop uninitialized hrtimer.
Move the GRO flag updates to the XDP enable / disable paths,
instead of mixing them with the ndo_open / ndo_close paths. |
| In the Linux kernel, the following vulnerability has been resolved:
md: Don't register sync_thread for reshape directly
Currently, if reshape is interrupted, then reassemble the array will
register sync_thread directly from pers->run(), in this case
'MD_RECOVERY_RUNNING' is set directly, however, there is no guarantee
that md_do_sync() will be executed, hence stop_sync_thread() will hang
because 'MD_RECOVERY_RUNNING' can't be cleared.
Last patch make sure that md_do_sync() will set MD_RECOVERY_DONE,
however, following hang can still be triggered by dm-raid test
shell/lvconvert-raid-reshape.sh occasionally:
[root@fedora ~]# cat /proc/1982/stack
[<0>] stop_sync_thread+0x1ab/0x270 [md_mod]
[<0>] md_frozen_sync_thread+0x5c/0xa0 [md_mod]
[<0>] raid_presuspend+0x1e/0x70 [dm_raid]
[<0>] dm_table_presuspend_targets+0x40/0xb0 [dm_mod]
[<0>] __dm_destroy+0x2a5/0x310 [dm_mod]
[<0>] dm_destroy+0x16/0x30 [dm_mod]
[<0>] dev_remove+0x165/0x290 [dm_mod]
[<0>] ctl_ioctl+0x4bb/0x7b0 [dm_mod]
[<0>] dm_ctl_ioctl+0x11/0x20 [dm_mod]
[<0>] vfs_ioctl+0x21/0x60
[<0>] __x64_sys_ioctl+0xb9/0xe0
[<0>] do_syscall_64+0xc6/0x230
[<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74
Meanwhile mddev->recovery is:
MD_RECOVERY_RUNNING |
MD_RECOVERY_INTR |
MD_RECOVERY_RESHAPE |
MD_RECOVERY_FROZEN
Fix this problem by remove the code to register sync_thread directly
from raid10 and raid5. And let md_check_recovery() to register
sync_thread. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/qedr: Fix qedr_create_user_qp error flow
Avoid the following warning by making sure to free the allocated
resources in case that qedr_init_user_queue() fail.
-----------[ cut here ]-----------
WARNING: CPU: 0 PID: 143192 at drivers/infiniband/core/rdma_core.c:874 uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs]
Modules linked in: tls target_core_user uio target_core_pscsi target_core_file target_core_iblock ib_srpt ib_srp scsi_transport_srp nfsd nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs 8021q garp mrp stp llc ext4 mbcache jbd2 opa_vnic ib_umad ib_ipoib sunrpc rdma_ucm ib_isert iscsi_target_mod target_core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm hfi1 intel_rapl_msr intel_rapl_common mgag200 qedr sb_edac drm_shmem_helper rdmavt x86_pkg_temp_thermal drm_kms_helper intel_powerclamp ib_uverbs coretemp i2c_algo_bit kvm_intel dell_wmi_descriptor ipmi_ssif sparse_keymap kvm ib_core rfkill syscopyarea sysfillrect video sysimgblt irqbypass ipmi_si ipmi_devintf fb_sys_fops rapl iTCO_wdt mxm_wmi iTCO_vendor_support intel_cstate pcspkr dcdbas intel_uncore ipmi_msghandler lpc_ich acpi_power_meter mei_me mei fuse drm xfs libcrc32c qede sd_mod ahci libahci t10_pi sg crct10dif_pclmul crc32_pclmul crc32c_intel qed libata tg3
ghash_clmulni_intel megaraid_sas crc8 wmi [last unloaded: ib_srpt]
CPU: 0 PID: 143192 Comm: fi_rdm_tagged_p Kdump: loaded Not tainted 5.14.0-408.el9.x86_64 #1
Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 2.14.0 01/25/2022
RIP: 0010:uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs]
Code: 5d 41 5c 41 5d 41 5e e9 0f 26 1b dd 48 89 df e8 67 6a ff ff 49 8b 86 10 01 00 00 48 85 c0 74 9c 4c 89 e7 e8 83 c0 cb dd eb 92 <0f> 0b eb be 0f 0b be 04 00 00 00 48 89 df e8 8e f5 ff ff e9 6d ff
RSP: 0018:ffffb7c6cadfbc60 EFLAGS: 00010286
RAX: ffff8f0889ee3f60 RBX: ffff8f088c1a5200 RCX: 00000000802a0016
RDX: 00000000802a0017 RSI: 0000000000000001 RDI: ffff8f0880042600
RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000
R10: ffff8f11fffd5000 R11: 0000000000039000 R12: ffff8f0d5b36cd80
R13: ffff8f088c1a5250 R14: ffff8f1206d91000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8f11d7c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000147069200e20 CR3: 00000001c7210002 CR4: 00000000001706f0
Call Trace:
<TASK>
? show_trace_log_lvl+0x1c4/0x2df
? show_trace_log_lvl+0x1c4/0x2df
? ib_uverbs_close+0x1f/0xb0 [ib_uverbs]
? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs]
? __warn+0x81/0x110
? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs]
? report_bug+0x10a/0x140
? handle_bug+0x3c/0x70
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs]
ib_uverbs_close+0x1f/0xb0 [ib_uverbs]
__fput+0x94/0x250
task_work_run+0x5c/0x90
do_exit+0x270/0x4a0
do_group_exit+0x2d/0x90
get_signal+0x87c/0x8c0
arch_do_signal_or_restart+0x25/0x100
? ib_uverbs_ioctl+0xc2/0x110 [ib_uverbs]
exit_to_user_mode_loop+0x9c/0x130
exit_to_user_mode_prepare+0xb6/0x100
syscall_exit_to_user_mode+0x12/0x40
do_syscall_64+0x69/0x90
? syscall_exit_work+0x103/0x130
? syscall_exit_to_user_mode+0x22/0x40
? do_syscall_64+0x69/0x90
? syscall_exit_work+0x103/0x130
? syscall_exit_to_user_mode+0x22/0x40
? do_syscall_64+0x69/0x90
? do_syscall_64+0x69/0x90
? common_interrupt+0x43/0xa0
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x1470abe3ec6b
Code: Unable to access opcode bytes at RIP 0x1470abe3ec41.
RSP: 002b:00007fff13ce9108 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: fffffffffffffffc RBX: 00007fff13ce9218 RCX: 00001470abe3ec6b
RDX: 00007fff13ce9200 RSI: 00000000c0181b01 RDI: 0000000000000004
RBP: 00007fff13ce91e0 R08: 0000558d9655da10 R09: 0000558d9655dd00
R10: 00007fff13ce95c0 R11: 0000000000000246 R12: 00007fff13ce9358
R13: 0000000000000013 R14: 0000558d9655db50 R15: 00007fff13ce9470
</TASK>
--[ end trace 888a9b92e04c5c97 ]-- |
| In the Linux kernel, the following vulnerability has been resolved:
dccp/tcp: Unhash sk from ehash for tb2 alloc failure after check_estalblished().
syzkaller reported a warning [0] in inet_csk_destroy_sock() with no
repro.
WARN_ON(inet_sk(sk)->inet_num && !inet_csk(sk)->icsk_bind_hash);
However, the syzkaller's log hinted that connect() failed just before
the warning due to FAULT_INJECTION. [1]
When connect() is called for an unbound socket, we search for an
available ephemeral port. If a bhash bucket exists for the port, we
call __inet_check_established() or __inet6_check_established() to check
if the bucket is reusable.
If reusable, we add the socket into ehash and set inet_sk(sk)->inet_num.
Later, we look up the corresponding bhash2 bucket and try to allocate
it if it does not exist.
Although it rarely occurs in real use, if the allocation fails, we must
revert the changes by check_established(). Otherwise, an unconnected
socket could illegally occupy an ehash entry.
Note that we do not put tw back into ehash because sk might have
already responded to a packet for tw and it would be better to free
tw earlier under such memory presure.
[0]:
WARNING: CPU: 0 PID: 350830 at net/ipv4/inet_connection_sock.c:1193 inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193)
Modules linked in:
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193)
Code: 41 5c 41 5d 41 5e e9 2d 4a 3d fd e8 28 4a 3d fd 48 89 ef e8 f0 cd 7d ff 5b 5d 41 5c 41 5d 41 5e e9 13 4a 3d fd e8 0e 4a 3d fd <0f> 0b e9 61 fe ff ff e8 02 4a 3d fd 4c 89 e7 be 03 00 00 00 e8 05
RSP: 0018:ffffc9000b21fd38 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000009e78 RCX: ffffffff840bae40
RDX: ffff88806e46c600 RSI: ffffffff840bb012 RDI: ffff88811755cca8
RBP: ffff88811755c880 R08: 0000000000000003 R09: 0000000000000000
R10: 0000000000009e78 R11: 0000000000000000 R12: ffff88811755c8e0
R13: ffff88811755c892 R14: ffff88811755c918 R15: 0000000000000000
FS: 00007f03e5243800(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32f21000 CR3: 0000000112ffe001 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
? inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193)
dccp_close (net/dccp/proto.c:1078)
inet_release (net/ipv4/af_inet.c:434)
__sock_release (net/socket.c:660)
sock_close (net/socket.c:1423)
__fput (fs/file_table.c:377)
__fput_sync (fs/file_table.c:462)
__x64_sys_close (fs/open.c:1557 fs/open.c:1539 fs/open.c:1539)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129)
RIP: 0033:0x7f03e53852bb
Code: 03 00 00 00 0f 05 48 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 43 c9 f5 ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 a1 c9 f5 ff 8b 44
RSP: 002b:00000000005dfba0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f03e53852bb
RDX: 0000000000000002 RSI: 0000000000000002 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000167c
R10: 0000000008a79680 R11: 0000000000000293 R12: 00007f03e4e43000
R13: 00007f03e4e43170 R14: 00007f03e4e43178 R15: 00007f03e4e43170
</TASK>
[1]:
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 0
CPU: 0 PID: 350833 Comm: syz-executor.1 Not tainted 6.7.0-12272-g2121c43f88f5 #9
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1))
should_fail_ex (lib/fault-inject.c:52 lib/fault-inject.c:153)
should_failslab (mm/slub.c:3748)
kmem_cache_alloc (mm/slub.c:3763 mm/slub.c:3842 mm/slub.c:3867)
inet_bind2_bucket_create
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
xen/events: close evtchn after mapping cleanup
shutdown_pirq and startup_pirq are not taking the
irq_mapping_update_lock because they can't due to lock inversion. Both
are called with the irq_desc->lock being taking. The lock order,
however, is first irq_mapping_update_lock and then irq_desc->lock.
This opens multiple races:
- shutdown_pirq can be interrupted by a function that allocates an event
channel:
CPU0 CPU1
shutdown_pirq {
xen_evtchn_close(e)
__startup_pirq {
EVTCHNOP_bind_pirq
-> returns just freed evtchn e
set_evtchn_to_irq(e, irq)
}
xen_irq_info_cleanup() {
set_evtchn_to_irq(e, -1)
}
}
Assume here event channel e refers here to the same event channel
number.
After this race the evtchn_to_irq mapping for e is invalid (-1).
- __startup_pirq races with __unbind_from_irq in a similar way. Because
__startup_pirq doesn't take irq_mapping_update_lock it can grab the
evtchn that __unbind_from_irq is currently freeing and cleaning up. In
this case even though the event channel is allocated, its mapping can
be unset in evtchn_to_irq.
The fix is to first cleanup the mappings and then close the event
channel. In this way, when an event channel gets allocated it's
potential previous evtchn_to_irq mappings are guaranteed to be unset already.
This is also the reverse order of the allocation where first the event
channel is allocated and then the mappings are setup.
On a 5.10 kernel prior to commit 3fcdaf3d7634 ("xen/events: modify internal
[un]bind interfaces"), we hit a BUG like the following during probing of NVMe
devices. The issue is that during nvme_setup_io_queues, pci_free_irq
is called for every device which results in a call to shutdown_pirq.
With many nvme devices it's therefore likely to hit this race during
boot because there will be multiple calls to shutdown_pirq and
startup_pirq are running potentially in parallel.
------------[ cut here ]------------
blkfront: xvda: barrier or flush: disabled; persistent grants: enabled; indirect descriptors: enabled; bounce buffer: enabled
kernel BUG at drivers/xen/events/events_base.c:499!
invalid opcode: 0000 [#1] SMP PTI
CPU: 44 PID: 375 Comm: kworker/u257:23 Not tainted 5.10.201-191.748.amzn2.x86_64 #1
Hardware name: Xen HVM domU, BIOS 4.11.amazon 08/24/2006
Workqueue: nvme-reset-wq nvme_reset_work
RIP: 0010:bind_evtchn_to_cpu+0xdf/0xf0
Code: 5d 41 5e c3 cc cc cc cc 44 89 f7 e8 2b 55 ad ff 49 89 c5 48 85 c0 0f 84 64 ff ff ff 4c 8b 68 30 41 83 fe ff 0f 85 60 ff ff ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 0f 1f 44 00 00
RSP: 0000:ffffc9000d533b08 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006
RDX: 0000000000000028 RSI: 00000000ffffffff RDI: 00000000ffffffff
RBP: ffff888107419680 R08: 0000000000000000 R09: ffffffff82d72b00
R10: 0000000000000000 R11: 0000000000000000 R12: 00000000000001ed
R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000002
FS: 0000000000000000(0000) GS:ffff88bc8b500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000002610001 CR4: 00000000001706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? show_trace_log_lvl+0x1c1/0x2d9
? show_trace_log_lvl+0x1c1/0x2d9
? set_affinity_irq+0xdc/0x1c0
? __die_body.cold+0x8/0xd
? die+0x2b/0x50
? do_trap+0x90/0x110
? bind_evtchn_to_cpu+0xdf/0xf0
? do_error_trap+0x65/0x80
? bind_evtchn_to_cpu+0xdf/0xf0
? exc_invalid_op+0x4e/0x70
? bind_evtchn_to_cpu+0xdf/0xf0
? asm_exc_invalid_op+0x12/0x20
? bind_evtchn_to_cpu+0xdf/0x
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: check for valid hw_pp in dpu_encoder_helper_phys_cleanup
The commit 8b45a26f2ba9 ("drm/msm/dpu: reserve cdm blocks for writeback
in case of YUV output") introduced a smatch warning about another
conditional block in dpu_encoder_helper_phys_cleanup() which had assumed
hw_pp will always be valid which may not necessarily be true.
Lets fix the other conditional block by making sure hw_pp is valid
before dereferencing it.
Patchwork: https://patchwork.freedesktop.org/patch/574878/ |
| In the Linux kernel, the following vulnerability has been resolved:
srcu: Tighten cleanup_srcu_struct() GP checks
Currently, cleanup_srcu_struct() checks for a grace period in progress,
but it does not check for a grace period that has not yet started but
which might start at any time. Such a situation could result in a
use-after-free bug, so this commit adds a check for a grace period that
is needed but not yet started to cleanup_srcu_struct(). |
| In the Linux kernel, the following vulnerability has been resolved:
ixgbevf: Fix resource leak in ixgbevf_init_module()
ixgbevf_init_module() won't destroy the workqueue created by
create_singlethread_workqueue() when pci_register_driver() failed. Add
destroy_workqueue() in fail path to prevent the resource leak.
Similar to the handling of u132_hcd_init in commit f276e002793c
("usb: u132-hcd: fix resource leak") |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix server->active leak in afs_put_server
The atomic_read was accidentally replaced with atomic_inc_return,
which prevents the server from getting cleaned up and causes rmmod
to hang with a warning:
Can't purge s=00000001 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Fix not cleanup led when bt_init fails
bt_init() calls bt_leds_init() to register led, but if it fails later,
bt_leds_cleanup() is not called to unregister it.
This can cause panic if the argument "bluetooth-power" in text is freed
and then another led_trigger_register() tries to access it:
BUG: unable to handle page fault for address: ffffffffc06d3bc0
RIP: 0010:strcmp+0xc/0x30
Call Trace:
<TASK>
led_trigger_register+0x10d/0x4f0
led_trigger_register_simple+0x7d/0x100
bt_init+0x39/0xf7 [bluetooth]
do_one_initcall+0xd0/0x4e0 |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa: ifcvf: Do proper cleanup if IFCVF init fails
ifcvf_mgmt_dev leaks memory if it is not freed before
returning. Call is made to correct return statement
so memory does not leak. ifcvf_init_hw does not take
care of this so it is needed to do it here. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: switchtec: Fix stdev_release() crash after surprise hot remove
A PCI device hot removal may occur while stdev->cdev is held open. The call
to stdev_release() then happens during close or exit, at a point way past
switchtec_pci_remove(). Otherwise the last ref would vanish with the
trailing put_device(), just before return.
At that later point in time, the devm cleanup has already removed the
stdev->mmio_mrpc mapping. Also, the stdev->pdev reference was not a counted
one. Therefore, in DMA mode, the iowrite32() in stdev_release() will cause
a fatal page fault, and the subsequent dma_free_coherent(), if reached,
would pass a stale &stdev->pdev->dev pointer.
Fix by moving MRPC DMA shutdown into switchtec_pci_remove(), after
stdev_kill(). Counting the stdev->pdev ref is now optional, but may prevent
future accidents.
Reproducible via the script at
https://lore.kernel.org/r/20231113212150.96410-1-dns@arista.com |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: core: Avoid smp_processor_id() in preemptible code
The BUG message "BUG: using smp_processor_id() in preemptible [00000000]
code" was observed for TCMU devices with kernel config DEBUG_PREEMPT.
The message was observed when blktests block/005 was run on TCMU devices
with fileio backend or user:zbc backend [1]. The commit 1130b499b4a7
("scsi: target: tcm_loop: Use LIO wq cmd submission helper") triggered the
symptom. The commit modified work queue to handle commands and changed
'current->nr_cpu_allowed' at smp_processor_id() call.
The message was also observed at system shutdown when TCMU devices were not
cleaned up [2]. The function smp_processor_id() was called in SCSI host
work queue for abort handling, and triggered the BUG message. This symptom
was observed regardless of the commit 1130b499b4a7 ("scsi: target:
tcm_loop: Use LIO wq cmd submission helper").
To avoid the preemptible code check at smp_processor_id(), get CPU ID with
raw_smp_processor_id() instead. The CPU ID is used for performance
improvement then thread move to other CPU will not affect the code.
[1]
[ 56.468103] run blktests block/005 at 2021-05-12 14:16:38
[ 57.369473] check_preemption_disabled: 85 callbacks suppressed
[ 57.369480] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1511
[ 57.369506] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1510
[ 57.369512] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1506
[ 57.369552] caller is __target_init_cmd+0x157/0x170 [target_core_mod]
[ 57.369606] CPU: 4 PID: 1506 Comm: fio Not tainted 5.13.0-rc1+ #34
[ 57.369613] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 1302 03/15/2018
[ 57.369617] Call Trace:
[ 57.369621] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1507
[ 57.369628] dump_stack+0x6d/0x89
[ 57.369642] check_preemption_disabled+0xc8/0xd0
[ 57.369628] caller is __target_init_cmd+0x157/0x170 [target_core_mod]
[ 57.369655] __target_init_cmd+0x157/0x170 [target_core_mod]
[ 57.369695] target_init_cmd+0x76/0x90 [target_core_mod]
[ 57.369732] tcm_loop_queuecommand+0x109/0x210 [tcm_loop]
[ 57.369744] scsi_queue_rq+0x38e/0xc40
[ 57.369761] __blk_mq_try_issue_directly+0x109/0x1c0
[ 57.369779] blk_mq_try_issue_directly+0x43/0x90
[ 57.369790] blk_mq_submit_bio+0x4e5/0x5d0
[ 57.369812] submit_bio_noacct+0x46e/0x4e0
[ 57.369830] __blkdev_direct_IO_simple+0x1a3/0x2d0
[ 57.369859] ? set_init_blocksize.isra.0+0x60/0x60
[ 57.369880] generic_file_read_iter+0x89/0x160
[ 57.369898] blkdev_read_iter+0x44/0x60
[ 57.369906] new_sync_read+0x102/0x170
[ 57.369929] vfs_read+0xd4/0x160
[ 57.369941] __x64_sys_pread64+0x6e/0xa0
[ 57.369946] ? lockdep_hardirqs_on+0x79/0x100
[ 57.369958] do_syscall_64+0x3a/0x70
[ 57.369965] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 57.369973] RIP: 0033:0x7f7ed4c1399f
[ 57.369979] Code: 08 89 3c 24 48 89 4c 24 18 e8 7d f3 ff ff 4c 8b 54 24 18 48 8b 54 24 10 41 89 c0 48 8b 74 24 08 8b 3c 24 b8 11 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 04 24 e8 cd f3 ff ff 48 8b
[ 57.369983] RSP: 002b:00007ffd7918c580 EFLAGS: 00000293 ORIG_RAX: 0000000000000011
[ 57.369990] RAX: ffffffffffffffda RBX: 00000000015b4540 RCX: 00007f7ed4c1399f
[ 57.369993] RDX: 0000000000001000 RSI: 00000000015de000 RDI: 0000000000000009
[ 57.369996] RBP: 00000000015b4540 R08: 0000000000000000 R09: 0000000000000001
[ 57.369999] R10: 0000000000e5c000 R11: 0000000000000293 R12: 00007f7eb5269a70
[ 57.370002] R13: 0000000000000000 R14: 0000000000001000 R15: 00000000015b4568
[ 57.370031] CPU: 7 PID: 1507 Comm: fio Not tainted 5.13.0-rc1+ #34
[ 57.370036] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 1302 03/15/2018
[ 57.370039] Call Trace:
[ 57.370045] dump_stack+0x6d/0x89
[ 57.370056] ch
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: remove device from smcd_dev_list after failed device_add()
If the device_add() for a smcd_dev fails, there's no cleanup step that
rolls back the earlier list_add(). The device subsequently gets freed,
and we end up with a corrupted list.
Add some error handling that removes the device from the list. |
| The kernel module has the vulnerability that the mapping is not cleared after the memory is automatically released. Successful exploitation of this vulnerability may cause a system restart. |
| A double-free flaw was found in the Linux kernel’s NTFS3 subsystem in how a user triggers remount and umount simultaneously. This flaw allows a local user to crash or potentially escalate their privileges on the system. |
| The cURL wrapper in Moodle retained the original request headers when following redirects, so HTTP authorization header information could be unintentionally sent in requests to redirect URLs. |
| The Zoom Client for Meetings (for Android, iOS, Linux, macOS, and Windows) before version 5.12.6 is susceptible to a local information exposure vulnerability. A failure to clear data from a local SQL database after a meeting ends and the usage of an insufficiently secure per-device key encrypting that database results in a local malicious user being able to obtain meeting information such as in-meeting chat for the previous meeting attended from that local user account. |
