| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Neutralization of Script-Related HTML Tags in a Web Page (Basic XSS) vulnerability in Themeum Kirki kirki allows Code Injection.This issue affects Kirki: from n/a through 6.4.0. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: wcove: don't write past struct pd_message in wcove_read_rx_buffer()
wcove_read_rx_buffer() copies the PD RX FIFO into the caller's
struct pd_message with
for (i = 0; i < USBC_RXINFO_RXBYTES(info); i++)
regmap_read(wcove->regmap, USBC_RX_DATA + i, msg + i);
which has two problems:
USBC_RXINFO_RXBYTES() is a 5-bit field (max 31) while struct pd_message
is 30 bytes (__le16 header + __le32 payload[PD_MAX_PAYLOAD], packed).
The byte count latched in RXINFO is the number of bytes the port partner
put on the wire, so a malicious partner that transmits a 31-byte frame
can drive the loop one byte past the destination if the WCOVE BMC
receiver does not enforce the PD object-count limit in hardware. The
existing FIXME flagged this as unverified.
Independently, regmap_read() takes an unsigned int * and stores a full
unsigned int at the destination. Passing the byte pointer msg + i means
each iteration writes four bytes; the high three are zero (val_bits is
8) and are normally overwritten by the next iteration, but the final
iteration's high bytes are not. With RXBYTES == 30 the i == 29 iteration
already writes three zero bytes past msg, which sits on the IRQ thread's
stack in wcove_typec_irq().
Clamp the loop to sizeof(struct pd_message) and read each register into
a local before storing only its low byte, so the copy can never exceed
the destination regardless of what RXINFO reports. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: altmodes/displayport: validate count before reading Status Update VDO
A broken/malicious device can send the incorrect count for a status
update VDO, which will cause the kernel to read uninitialized stack data
and send it off elsewhere.
Fix this up by correctly verifying the count for the update object. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix out-of-bounds access in read_block_state()
read_block_state() calculates nr_pages before taking dev_lock. If the
device is reset and reinitialized with a smaller disksize before lock
acquisition, nr_pages still describes the old table. The subsequent loop
can then call slot_lock() past the end of the newly allocated table.
Read disksize after acquiring dev_lock and checking that the device is
initialized. The read lock then keeps the table and its bound stable for
the duration of the scan. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix kernel BUG in ext4_write_inline_data_end
When the data=journal mount option is used, the ext4_journalled_write_end()
function incorrectly calls ext4_write_inline_data_end() without checking
if the EXT4_STATE_MAY_INLINE_DATA flag is still set on the inode.
If a previous attempt to convert the inline data to an extent failed (e.g.
due to ENOSPC), the EXT4_STATE_MAY_INLINE_DATA flag is cleared, but
the EXT4_INODE_INLINE_DATA flag remains set. In this scenario, the next
call to ext4_write_begin() will not prepare the inline data xattr for
writing, but ext4_journalled_write_end() will incorrectly attempt to write
to it, triggering a BUG_ON(pos + len > EXT4_I(inode)->i_inline_size) in
ext4_write_inline_data() since i_inline_size was not expanded.
Fix this by ensuring that ext4_journalled_write_end() only calls
ext4_write_inline_data_end() if the EXT4_STATE_MAY_INLINE_DATA flag is
set, mirroring the behavior of ext4_write_end() and ext4_da_write_end(). |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: validate embedded INIT chunk and address list lengths in cookie
sctp_unpack_cookie() only checked that the embedded INIT chunk length
did not exceed the remaining cookie payload, but did not ensure that the
INIT chunk is large enough to contain a complete INIT header.
A malformed COOKIE_ECHO can therefore carry a truncated INIT chunk whose
length field is smaller than sizeof(struct sctp_init_chunk). Later,
sctp_process_init() accesses INIT parameters unconditionally, which may
lead to out-of-bounds reads.
In addition, raw_addr_list_len is not fully validated against the
remaining cookie payload. When cookie authentication is disabled, an
attacker can supply an oversized raw_addr_list_len and cause
sctp_raw_to_bind_addrs() to read beyond the end of the cookie. The
address parser also lacks sufficient bounds checks for parameter headers
and lengths, allowing malformed address parameters to trigger
out-of-bounds reads.
Fix this by:
- requiring the embedded INIT chunk length to be at least sizeof(struct
sctp_init_chunk);
- validating that the INIT chunk and raw address list together fit
within the cookie payload;
- verifying sufficient data exists for each address parameter header and
payload before parsing it.
Note that sctp_verify_init() must be called after sctp_unpack_cookie()
and before sctp_process_init() when cookie authentication is disabled.
This will be addressed in a separate patch. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix OOB in pcpu_init_value
An out-of-bounds read occurs when copying element from a
BPF_MAP_TYPE_CGROUP_STORAGE map to another pcpu map with the
same value_size that is not rounded up to 8 bytes.
The issue happens when:
1. A CGROUP_STORAGE map is created with value_size not aligned to
8 bytes (e.g., 4 bytes)
2. A pcpu map is created with the same value_size (e.g., 4 bytes)
3. Update element in 2 with data in 1
pcpu_init_value assumes that all sources are rounded up to 8 bytes,
and invokes copy_map_value_long to make a data copy, However, the
assumption doesn't stand since there are some cases where the source
may not be rounded up to 8 bytes, e.g., CGROUP_STORAGE, skb->data.
the verifier verifies exactly the size that the source claims, not
the size rounded up to 8 bytes by kernel, an OOB happens when the
source has only 4 bytes while the copy size(4) is rounded up to 8. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate inherited ACE SID length
smb_inherit_dacl() walks the parent directory DACL loaded from the
security descriptor xattr. It verifies that each ACE contains the fixed
SID header before using it, but does not verify that the variable-length
SID described by sid.num_subauth is fully contained in the ACE.
A malformed inheritable ACE can advertise more subauthorities than are
present in the ACE. compare_sids() may then read past the ACE.
smb_set_ace() also clamps the copied destination SID, but used the
unchecked source SID count to compute the inherited ACE size. That could
advance the temporary inherited ACE buffer pointer and nt_size accounting
past the allocated buffer.
Fix this by validating the parent ACE SID count and SID length before
using the SID during inheritance. Compute the inherited ACE size from the
copied SID so the size matches the bounded destination SID. Reject the
inherited DACL if size accumulation would overflow smb_acl.size or the
security descriptor allocation size. |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: fix out-of-bounds writes in iavf_get_ethtool_stats()
iavf incorrectly uses real_num_tx_queues for ETH_SS_STATS. Since the
value could change in runtime, we should use num_tx_queues instead.
Moreover iavf_get_ethtool_stats() uses num_active_queues while
iavf_get_sset_count() and iavf_get_stat_strings() use
real_num_tx_queues, which triggers out-of-bounds writes when we do
"ethtool -L" and "ethtool -S" simultaneously [1].
For example when we change channels from 1 to 8, Thread 3 could be
scheduled before Thread 2, and out-of-bounds writes could be triggered
in Thread 3:
Thread 1 (ethtool -L) Thread 2 (work) Thread 3 (ethtool -S)
iavf_set_channels()
...
iavf_alloc_queues()
-> num_active_queues = 8
iavf_schedule_finish_config()
iavf_get_sset_count()
real_num_tx_queues: 1
-> buffer for 1 queue
iavf_get_ethtool_stats()
num_active_queues: 8
-> out-of-bounds!
iavf_finish_config()
-> real_num_tx_queues = 8
Use immutable num_tx_queues in all related functions to avoid the issue.
[1]
BUG: KASAN: vmalloc-out-of-bounds in iavf_add_one_ethtool_stat+0x200/0x270
Write of size 8 at addr ffffc900031c9080 by task ethtool/5800
CPU: 1 UID: 0 PID: 5800 Comm: ethtool Not tainted 6.19.0-enjuk-08403-g8137e3db7f1c #241 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xb0
print_report+0x170/0x4f3
kasan_report+0xe1/0x180
iavf_add_one_ethtool_stat+0x200/0x270
iavf_get_ethtool_stats+0x14c/0x2e0
__dev_ethtool+0x3d0c/0x5830
dev_ethtool+0x12d/0x270
dev_ioctl+0x53c/0xe30
sock_do_ioctl+0x1a9/0x270
sock_ioctl+0x3d4/0x5e0
__x64_sys_ioctl+0x137/0x1c0
do_syscall_64+0xf3/0x690
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7da0e6e36d
...
</TASK>
The buggy address belongs to a 1-page vmalloc region starting at 0xffffc900031c9000 allocated at __dev_ethtool+0x3cc9/0x5830
The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000
index:0xffff88813a013de0 pfn:0x13a013
flags: 0x200000000000000(node=0|zone=2)
raw: 0200000000000000 0000000000000000 dead000000000122 0000000000000000
raw: ffff88813a013de0 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffc900031c8f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900031c9000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffc900031c9080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
ffffc900031c9100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900031c9180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 |
| When NLnet Labs Unbound up to and including version 1.26.1 is configured with both a root trust anchor and an additional 'trust-anchor:' for an island-of-security zone whose parent is provably insecure under the root chain, a malicious actor who can deliver one forged NXDOMAIN response for a name inside the island, with the NSEC/SOA RRSIG 'SignerName' set to the insecure parent, tricks Unbound's validator to use the root trust anchor instead, and consecutively the insecure parent, thus causing that record to be treated as insecure and denying existence for records in the trust island. |
| Reliance on untrusted inputs in a security decision in Windows IKE Extension allows an unauthorized attacker to perform spoofing over a network. |
| Improper Neutralization of Script-Related HTML Tags in a Web Page (Basic XSS) vulnerability in Brave Brave brave-popup-builder allows Code Injection.This issue affects Brave: from n/a through 0.8.8. |
| Improper Neutralization of Script-Related HTML Tags in a Web Page (Basic XSS) vulnerability in ThemeGrill User Registration user-registration allows Code Injection.This issue affects User Registration: from n/a through 5.3.0. |
| Improper Neutralization of Script-Related HTML Tags in a Web Page (Basic XSS) vulnerability in Brainstorm Force SureForms sureforms allows Code Injection.This issue affects SureForms: from n/a through 2.12.9. |
| Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to 1.9.0, OpenIDImplicitGrant.validate_authorization_request() checks the client-controlled raw request.payload.scope for openid after the parent grant has filtered allowed scopes into request.scope. A registered client permitted an ID token response type but not the openid scope can add openid to the request, obtain user consent, and receive a signed ID token containing the user's subject and allowed profile claims. Authorization code flow and deployments that allow openid for every client permitted an ID token response are not affected. In authlib/oidc/core/grants/implicit.py, OpenIDImplicitGrant.validate_authorization_request() checks request.payload.scope instead of the filtered request.scope. This issue is fixed in version 1.9.0. |
| Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to 1.9.0, OpenIDMixin.parse_id_token() reads the nonce_supported decision from the untrusted ID token being validated and sets the expected nonce to null when that claim is the JSON boolean false. In implicit and hybrid relying parties, or applications that directly accept externally supplied ID tokens, an attacker with a captured validly signed token can bypass the nonce-to-session binding and replay the victim's token into an attacker-controlled session. Plain authorization code flow is not affected, and the token must still pass signature, issuer, and audience validation. OpenIDMixin.parse_id_token() trusts nonce_supported in both authlib/integrations/base_client/sync_openid.py and authlib/integrations/base_client/async_openid.py to disable the expected nonce. This issue is fixed in version 1.9.0. |
| The Jupiter X Core plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'forget_password_link' parameter in all versions up to, and including, 4.61.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| Vite is a frontend tooling framework for JavaScript. Prior to 6.4.4, 7.3.7, 8.1.6, 8.2.4, and 8.3.3, applications using custom middleware are vulnerable when they pass an unchanged browser request URL to server.transformIndexHtml. getHtmlFilename uses the query-bearing request URL to resolve an existing local file while preserving attacker-supplied leading slashes in the generated proxy module URL. If the transformed HTML contains an inline module script and a victim browser loads the crafted development-server page, the leading double slash makes the browser fetch and execute an attacker-controlled module in the Vite-served page. This execution can expose sensitive page data or permit critical actions available to the affected application. This issue is fixed in versions 6.4.4, 7.3.7, 8.1.6, 8.2.4, and 8.3.3. |
| Vyper before 0.2.9 deploys forwarder proxies through the built-in create_forwarder_to function that report a fixed 4096-byte RETURNDATASIZE rather than the actual return data size. Calls through these proxies can yield corrupted data when a function returns more than 4096 bytes without return data sanitation, and fail strict return-size checks such as SafeERC20.safeTransfer. |
| Improper Neutralization of Script-Related HTML Tags in a Web Page (Basic XSS) vulnerability in Magepeople inc. WpEvently mage-eventpress allows Code Injection.This issue affects WpEvently: from n/a through 5.7.9. |
