| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in Samba. The smbd service daemon does not pick up group membership changes when re-authenticating an expired SMB session. This issue can expose file shares until clients disconnect and then connect again. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Restore context entry setup order for aliased devices
Commit 2031c469f816 ("iommu/vt-d: Add support for static identity domain")
changed the context entry setup during domain attachment from a
set-and-check policy to a clear-and-reset approach. This inadvertently
introduced a regression affecting PCI aliased devices behind PCIe-to-PCI
bridges.
Specifically, keyboard and touchpad stopped working on several Apple
Macbooks with below messages:
kernel: platform pxa2xx-spi.3: Adding to iommu group 20
kernel: input: Apple SPI Keyboard as
/devices/pci0000:00/0000:00:1e.3/pxa2xx-spi.3/spi_master/spi2/spi-APP000D:00/input/input0
kernel: DMAR: DRHD: handling fault status reg 3
kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr
0xffffa000 [fault reason 0x06] PTE Read access is not set
kernel: DMAR: DRHD: handling fault status reg 3
kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr
0xffffa000 [fault reason 0x06] PTE Read access is not set
kernel: applespi spi-APP000D:00: Error writing to device: 01 0e 00 00
kernel: DMAR: DRHD: handling fault status reg 3
kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr
0xffffa000 [fault reason 0x06] PTE Read access is not set
kernel: DMAR: DRHD: handling fault status reg 3
kernel: applespi spi-APP000D:00: Error writing to device: 01 0e 00 00
Fix this by restoring the previous context setup order. |
| The Coil Web Monetization plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 2.0.2. This is due to missing or incorrect nonce validation on the coil-get-css-selector parameter handling in the maybe_restrict_content function. This makes it possible for unauthenticated attackers to trigger CSS selector detection functionality via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_reject_ipv6: fix nf_reject_ip6_tcphdr_put()
syzbot reported that nf_reject_ip6_tcphdr_put() was possibly sending
garbage on the four reserved tcp bits (th->res1)
Use skb_put_zero() to clear the whole TCP header,
as done in nf_reject_ip_tcphdr_put()
BUG: KMSAN: uninit-value in nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255
nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255
nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344
nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48
expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline]
nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288
nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626
nf_hook include/linux/netfilter.h:269 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310
__netif_receive_skb_one_core net/core/dev.c:5661 [inline]
__netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775
process_backlog+0x4ad/0xa50 net/core/dev.c:6108
__napi_poll+0xe7/0x980 net/core/dev.c:6772
napi_poll net/core/dev.c:6841 [inline]
net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963
handle_softirqs+0x1ce/0x800 kernel/softirq.c:554
__do_softirq+0x14/0x1a kernel/softirq.c:588
do_softirq+0x9a/0x100 kernel/softirq.c:455
__local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:382
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:908 [inline]
__dev_queue_xmit+0x2692/0x5610 net/core/dev.c:4450
dev_queue_xmit include/linux/netdevice.h:3105 [inline]
neigh_resolve_output+0x9ca/0xae0 net/core/neighbour.c:1565
neigh_output include/net/neighbour.h:542 [inline]
ip6_finish_output2+0x2347/0x2ba0 net/ipv6/ip6_output.c:141
__ip6_finish_output net/ipv6/ip6_output.c:215 [inline]
ip6_finish_output+0xbb8/0x14b0 net/ipv6/ip6_output.c:226
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip6_output+0x356/0x620 net/ipv6/ip6_output.c:247
dst_output include/net/dst.h:450 [inline]
NF_HOOK include/linux/netfilter.h:314 [inline]
ip6_xmit+0x1ba6/0x25d0 net/ipv6/ip6_output.c:366
inet6_csk_xmit+0x442/0x530 net/ipv6/inet6_connection_sock.c:135
__tcp_transmit_skb+0x3b07/0x4880 net/ipv4/tcp_output.c:1466
tcp_transmit_skb net/ipv4/tcp_output.c:1484 [inline]
tcp_connect+0x35b6/0x7130 net/ipv4/tcp_output.c:4143
tcp_v6_connect+0x1bcc/0x1e40 net/ipv6/tcp_ipv6.c:333
__inet_stream_connect+0x2ef/0x1730 net/ipv4/af_inet.c:679
inet_stream_connect+0x6a/0xd0 net/ipv4/af_inet.c:750
__sys_connect_file net/socket.c:2061 [inline]
__sys_connect+0x606/0x690 net/socket.c:2078
__do_sys_connect net/socket.c:2088 [inline]
__se_sys_connect net/socket.c:2085 [inline]
__x64_sys_connect+0x91/0xe0 net/socket.c:2085
x64_sys_call+0x27a5/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:43
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was stored to memory at:
nf_reject_ip6_tcphdr_put+0x60c/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:249
nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344
nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48
expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline]
nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288
nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626
nf_hook include/linux/netfilter.h:269 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310
__netif_receive_skb_one_core
---truncated--- |
| The CSV to SortTable plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'csv' shortcode in all versions up to, and including, 4.2 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (ftsteutates) Fix TOCTOU race in fts_read()
In the fts_read() function, when handling hwmon_pwm_auto_channels_temp,
the code accesses the shared variable data->fan_source[channel] twice
without holding any locks. It is first checked against
FTS_FAN_SOURCE_INVALID, and if the check passes, it is read again
when used as an argument to the BIT() macro.
This creates a Time-of-Check to Time-of-Use (TOCTOU) race condition.
Another thread executing fts_update_device() can modify the value of
data->fan_source[channel] between the check and its use. If the value
is changed to FTS_FAN_SOURCE_INVALID (0xff) during this window, the
BIT() macro will be called with a large shift value (BIT(255)).
A bit shift by a value greater than or equal to the type width is
undefined behavior and can lead to a crash or incorrect values being
returned to userspace.
Fix this by reading data->fan_source[channel] into a local variable
once, eliminating the race condition. Additionally, add a bounds check
to ensure the value is less than BITS_PER_LONG before passing it to
the BIT() macro, making the code more robust against undefined behavior.
This possible bug was found by an experimental static analysis tool
developed by our team. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: only dirty folios when data journaling regular files
fstest generic/388 occasionally reproduces a crash that looks as
follows:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
Call Trace:
<TASK>
ext4_block_zero_page_range+0x30c/0x380 [ext4]
ext4_truncate+0x436/0x440 [ext4]
ext4_process_orphan+0x5d/0x110 [ext4]
ext4_orphan_cleanup+0x124/0x4f0 [ext4]
ext4_fill_super+0x262d/0x3110 [ext4]
get_tree_bdev_flags+0x132/0x1d0
vfs_get_tree+0x26/0xd0
vfs_cmd_create+0x59/0xe0
__do_sys_fsconfig+0x4ed/0x6b0
do_syscall_64+0x82/0x170
...
This occurs when processing a symlink inode from the orphan list. The
partial block zeroing code in the truncate path calls
ext4_dirty_journalled_data() -> folio_mark_dirty(). The latter calls
mapping->a_ops->dirty_folio(), but symlink inodes are not assigned an
a_ops vector in ext4, hence the crash.
To avoid this problem, update the ext4_dirty_journalled_data() helper to
only mark the folio dirty on regular files (for which a_ops is
assigned). This also matches the journaling logic in the ext4_symlink()
creation path, where ext4_handle_dirty_metadata() is called directly. |
| Memory corruptions can be remotely triggered in the Control-M/Agent when SSL/TLS communication is configured.
The issue occurs in the following cases:
* Control-M/Agent 9.0.20: SSL/TLS configuration is set to the non-default setting "use_openssl=n";
* Control-M/Agent 9.0.21 and 9.0.22: Agent router configuration uses the non-default settings "JAVA_AR=N" and "use_openssl=n" |
| The Control-M/Agent is vulnerable to unauthenticated remote code execution, arbitrary file read and write and similar unauthorized actions when mutual SSL/TLS authentication is not enabled (i.e. in the default configuration).
NOTE:
* The vendor believes that this vulnerability only occurs when documented security best practices are not followed. BMC has always strongly recommended to use security best practices such as configuring SSL/TLS between Control-M Server and Agent.
* The vendor notifies that Control-M/Agent is not impacted in Control-M SaaS |
| A weakness has been identified in D-Link DWR-M920, DWR-M921, DWR-M960, DIR-822K and DIR-825M 1.01.07. This issue affects some unknown processing of the file /boafrm/formTracerouteDiagnosticRun. Executing manipulation of the argument host can lead to buffer overflow. The attack may be launched remotely. The exploit has been made available to the public and could be exploited. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix out of bounds punch offset
Punching a hole with a start offset that exceeds max_end is not
permitted and will result in a negative length in the
truncate_inode_partial_folio() function while truncating the page cache,
potentially leading to undesirable consequences.
A simple reproducer:
truncate -s 9895604649994 /mnt/foo
xfs_io -c "pwrite 8796093022208 4096" /mnt/foo
xfs_io -c "fpunch 8796093022213 25769803777" /mnt/foo
kernel BUG at include/linux/highmem.h:275!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 3 UID: 0 PID: 710 Comm: xfs_io Not tainted 6.15.0-rc3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:zero_user_segments.constprop.0+0xd7/0x110
RSP: 0018:ffffc90001cf3b38 EFLAGS: 00010287
RAX: 0000000000000005 RBX: ffffea0001485e40 RCX: 0000000000001000
RDX: 000000000040b000 RSI: 0000000000000005 RDI: 000000000040b000
RBP: 000000000040affb R08: ffff888000000000 R09: ffffea0000000000
R10: 0000000000000003 R11: 00000000fffc7fc5 R12: 0000000000000005
R13: 000000000040affb R14: ffffea0001485e40 R15: ffff888031cd3000
FS: 00007f4f63d0b780(0000) GS:ffff8880d337d000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000001ae0b038 CR3: 00000000536aa000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
truncate_inode_partial_folio+0x3dd/0x620
truncate_inode_pages_range+0x226/0x720
? bdev_getblk+0x52/0x3e0
? ext4_get_group_desc+0x78/0x150
? crc32c_arch+0xfd/0x180
? __ext4_get_inode_loc+0x18c/0x840
? ext4_inode_csum+0x117/0x160
? jbd2_journal_dirty_metadata+0x61/0x390
? __ext4_handle_dirty_metadata+0xa0/0x2b0
? kmem_cache_free+0x90/0x5a0
? jbd2_journal_stop+0x1d5/0x550
? __ext4_journal_stop+0x49/0x100
truncate_pagecache_range+0x50/0x80
ext4_truncate_page_cache_block_range+0x57/0x3a0
ext4_punch_hole+0x1fe/0x670
ext4_fallocate+0x792/0x17d0
? __count_memcg_events+0x175/0x2a0
vfs_fallocate+0x121/0x560
ksys_fallocate+0x51/0xc0
__x64_sys_fallocate+0x24/0x40
x64_sys_call+0x18d2/0x4170
do_syscall_64+0xa7/0x220
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix this by filtering out cases where the punching start offset exceeds
max_end. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix null pointer dereference after failing to issue FLOGI and PLOGI
If lpfc_issue_els_flogi() fails and returns non-zero status, the node
reference count is decremented to trigger the release of the nodelist
structure. However, if there is a prior registration or dev-loss-evt work
pending, the node may be released prematurely. When dev-loss-evt
completes, the released node is referenced causing a use-after-free null
pointer dereference.
Similarly, when processing non-zero ELS PLOGI completion status in
lpfc_cmpl_els_plogi(), the ndlp flags are checked for a transport
registration before triggering node removal. If dev-loss-evt work is
pending, the node may be released prematurely and a subsequent call to
lpfc_dev_loss_tmo_handler() results in a use after free ndlp dereference.
Add test for pending dev-loss before decrementing the node reference count
for FLOGI, PLOGI, PRLI, and ADISC handling. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not clean up repair bio if submit fails
The submit helper will always run bio_endio() on the bio if it fails to
submit, so cleaning up the bio just leads to a variety of use-after-free
and NULL pointer dereference bugs because we race with the endio
function that is cleaning up the bio. Instead just return BLK_STS_OK as
the repair function has to continue to process the rest of the pages,
and the endio for the repair bio will do the appropriate cleanup for the
page that it was given. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: arfs: fix use-after-free when freeing @rx_cpu_rmap
The CI testing bots triggered the following splat:
[ 718.203054] BUG: KASAN: use-after-free in free_irq_cpu_rmap+0x53/0x80
[ 718.206349] Read of size 4 at addr ffff8881bd127e00 by task sh/20834
[ 718.212852] CPU: 28 PID: 20834 Comm: sh Kdump: loaded Tainted: G S W IOE 5.17.0-rc8_nextqueue-devqueue-02643-g23f3121aca93 #1
[ 718.219695] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0012.070720200218 07/07/2020
[ 718.223418] Call Trace:
[ 718.227139]
[ 718.230783] dump_stack_lvl+0x33/0x42
[ 718.234431] print_address_description.constprop.9+0x21/0x170
[ 718.238177] ? free_irq_cpu_rmap+0x53/0x80
[ 718.241885] ? free_irq_cpu_rmap+0x53/0x80
[ 718.245539] kasan_report.cold.18+0x7f/0x11b
[ 718.249197] ? free_irq_cpu_rmap+0x53/0x80
[ 718.252852] free_irq_cpu_rmap+0x53/0x80
[ 718.256471] ice_free_cpu_rx_rmap.part.11+0x37/0x50 [ice]
[ 718.260174] ice_remove_arfs+0x5f/0x70 [ice]
[ 718.263810] ice_rebuild_arfs+0x3b/0x70 [ice]
[ 718.267419] ice_rebuild+0x39c/0xb60 [ice]
[ 718.270974] ? asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 718.274472] ? ice_init_phy_user_cfg+0x360/0x360 [ice]
[ 718.278033] ? delay_tsc+0x4a/0xb0
[ 718.281513] ? preempt_count_sub+0x14/0xc0
[ 718.284984] ? delay_tsc+0x8f/0xb0
[ 718.288463] ice_do_reset+0x92/0xf0 [ice]
[ 718.292014] ice_pci_err_resume+0x91/0xf0 [ice]
[ 718.295561] pci_reset_function+0x53/0x80
<...>
[ 718.393035] Allocated by task 690:
[ 718.433497] Freed by task 20834:
[ 718.495688] Last potentially related work creation:
[ 718.568966] The buggy address belongs to the object at ffff8881bd127e00
which belongs to the cache kmalloc-96 of size 96
[ 718.574085] The buggy address is located 0 bytes inside of
96-byte region [ffff8881bd127e00, ffff8881bd127e60)
[ 718.579265] The buggy address belongs to the page:
[ 718.598905] Memory state around the buggy address:
[ 718.601809] ffff8881bd127d00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ 718.604796] ffff8881bd127d80: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc
[ 718.607794] >ffff8881bd127e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ 718.610811] ^
[ 718.613819] ffff8881bd127e80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
[ 718.617107] ffff8881bd127f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
This is due to that free_irq_cpu_rmap() is always being called
*after* (devm_)free_irq() and thus it tries to work with IRQ descs
already freed. For example, on device reset the driver frees the
rmap right before allocating a new one (the splat above).
Make rmap creation and freeing function symmetrical with
{request,free}_irq() calls i.e. do that on ifup/ifdown instead
of device probe/remove/resume. These operations can be performed
independently from the actual device aRFS configuration.
Also, make sure ice_vsi_free_irq() clears IRQ affinity notifiers
only when aRFS is disabled -- otherwise, CPU rmap sets and clears
its own and they must not be touched manually. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix even more out of bound writes from debugfs
CVE-2021-42327 was fixed by:
commit f23750b5b3d98653b31d4469592935ef6364ad67
Author: Thelford Williams <tdwilliamsiv@gmail.com>
Date: Wed Oct 13 16:04:13 2021 -0400
drm/amdgpu: fix out of bounds write
but amdgpu_dm_debugfs.c contains more of the same issue so fix the
remaining ones.
v2:
* Add missing fix in dp_max_bpc_write (Harry Wentland) |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: avoid kernel BUG for encrypted inode with unaligned file size
The generic/397 test hits a BUG_ON for the case of encrypted inode with
unaligned file size (for example, 33K or 1K):
[ 877.737811] run fstests generic/397 at 2025-01-03 12:34:40
[ 877.875761] libceph: mon0 (2)127.0.0.1:40674 session established
[ 877.876130] libceph: client4614 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949
[ 877.991965] libceph: mon0 (2)127.0.0.1:40674 session established
[ 877.992334] libceph: client4617 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949
[ 878.017234] libceph: mon0 (2)127.0.0.1:40674 session established
[ 878.017594] libceph: client4620 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949
[ 878.031394] xfs_io (pid 18988) is setting deprecated v1 encryption policy; recommend upgrading to v2.
[ 878.054528] libceph: mon0 (2)127.0.0.1:40674 session established
[ 878.054892] libceph: client4623 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949
[ 878.070287] libceph: mon0 (2)127.0.0.1:40674 session established
[ 878.070704] libceph: client4626 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949
[ 878.264586] libceph: mon0 (2)127.0.0.1:40674 session established
[ 878.265258] libceph: client4629 fsid 19b90bca-f1ae-47a6-93dd-0b03ee637949
[ 878.374578] -----------[ cut here ]------------
[ 878.374586] kernel BUG at net/ceph/messenger.c:1070!
[ 878.375150] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 878.378145] CPU: 2 UID: 0 PID: 4759 Comm: kworker/2:9 Not tainted 6.13.0-rc5+ #1
[ 878.378969] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 878.380167] Workqueue: ceph-msgr ceph_con_workfn
[ 878.381639] RIP: 0010:ceph_msg_data_cursor_init+0x42/0x50
[ 878.382152] Code: 89 17 48 8b 46 70 55 48 89 47 08 c7 47 18 00 00 00 00 48 89 e5 e8 de cc ff ff 5d 31 c0 31 d2 31 f6 31 ff c3 cc cc cc cc 0f 0b <0f> 0b 0f 0b 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90
[ 878.383928] RSP: 0018:ffffb4ffc7cbbd28 EFLAGS: 00010287
[ 878.384447] RAX: ffffffff82bb9ac0 RBX: ffff981390c2f1f8 RCX: 0000000000000000
[ 878.385129] RDX: 0000000000009000 RSI: ffff981288232b58 RDI: ffff981390c2f378
[ 878.385839] RBP: ffffb4ffc7cbbe18 R08: 0000000000000000 R09: 0000000000000000
[ 878.386539] R10: 0000000000000000 R11: 0000000000000000 R12: ffff981390c2f030
[ 878.387203] R13: ffff981288232b58 R14: 0000000000000029 R15: 0000000000000001
[ 878.387877] FS: 0000000000000000(0000) GS:ffff9814b7900000(0000) knlGS:0000000000000000
[ 878.388663] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 878.389212] CR2: 00005e106a0554e0 CR3: 0000000112bf0001 CR4: 0000000000772ef0
[ 878.389921] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 878.390620] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 878.391307] PKRU: 55555554
[ 878.391567] Call Trace:
[ 878.391807] <TASK>
[ 878.392021] ? show_regs+0x71/0x90
[ 878.392391] ? die+0x38/0xa0
[ 878.392667] ? do_trap+0xdb/0x100
[ 878.392981] ? do_error_trap+0x75/0xb0
[ 878.393372] ? ceph_msg_data_cursor_init+0x42/0x50
[ 878.393842] ? exc_invalid_op+0x53/0x80
[ 878.394232] ? ceph_msg_data_cursor_init+0x42/0x50
[ 878.394694] ? asm_exc_invalid_op+0x1b/0x20
[ 878.395099] ? ceph_msg_data_cursor_init+0x42/0x50
[ 878.395583] ? ceph_con_v2_try_read+0xd16/0x2220
[ 878.396027] ? _raw_spin_unlock+0xe/0x40
[ 878.396428] ? raw_spin_rq_unlock+0x10/0x40
[ 878.396842] ? finish_task_switch.isra.0+0x97/0x310
[ 878.397338] ? __schedule+0x44b/0x16b0
[ 878.397738] ceph_con_workfn+0x326/0x750
[ 878.398121] process_one_work+0x188/0x3d0
[ 878.398522] ? __pfx_worker_thread+0x10/0x10
[ 878.398929] worker_thread+0x2b5/0x3c0
[ 878.399310] ? __pfx_worker_thread+0x10/0x10
[ 878.399727] kthread+0xe1/0x120
[ 878.400031] ? __pfx_kthread+0x10/0x10
[ 878.400431] ret_from_fork+0x43/0x70
[ 878.400771] ? __pfx_kthread+0x10/0x10
[ 878.401127] ret_from_fork_asm+0x1a/0x30
[ 878.401543] </TASK>
[ 878.401760] Modules l
---truncated--- |
| The Like-it plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 2.2. This is due to missing or incorrect nonce validation on the likeit_conf() function. This makes it possible for unauthenticated attackers to update settings and inject malicious web scripts via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| The Local Syndication plugin for WordPress is vulnerable to Server-Side Request Forgery in all versions up to, and including, 1.5a via the `url` parameter in the `[syndicate_local]` shortcode. This is due to the use of `wp_remote_get()` instead of `wp_safe_remote_get()` which lacks protections against requests to internal/private IP addresses and localhost. This makes it possible for authenticated attackers, with Contributor-level access and above, to make web requests to arbitrary locations originating from the web application, which can be used to query and modify information from internal services, scan internal networks, and access resources that should not be accessible from external networks. |
| The Top Friends plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 0.3. This is due to missing nonce validation on the top_friends_options_subpanel() function. This makes it possible for unauthenticated attackers to modify plugin settings via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in ThimPress Eduma eduma allows PHP Local File Inclusion.This issue affects Eduma: from n/a through <= 5.7.6. |
