| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: prevent infinite loop in rt6_nlmsg_size()
While testing prior patch, I was able to trigger
an infinite loop in rt6_nlmsg_size() in the following place:
list_for_each_entry_rcu(sibling, &f6i->fib6_siblings,
fib6_siblings) {
rt6_nh_nlmsg_size(sibling->fib6_nh, &nexthop_len);
}
This is because fib6_del_route() and fib6_add_rt2node()
uses list_del_rcu(), which can confuse rcu readers,
because they might no longer see the head of the list.
Restart the loop if f6i->fib6_nsiblings is zero. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible infinite loop in fib6_info_uses_dev()
fib6_info_uses_dev() seems to rely on RCU without an explicit
protection.
Like the prior fix in rt6_nlmsg_size(),
we need to make sure fib6_del_route() or fib6_add_rt2node()
have not removed the anchor from the list, or we risk an infinite loop. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, arm64: Fix fp initialization for exception boundary
In the ARM64 BPF JIT when prog->aux->exception_boundary is set for a BPF
program, find_used_callee_regs() is not called because for a program
acting as exception boundary, all callee saved registers are saved.
find_used_callee_regs() sets `ctx->fp_used = true;` when it sees FP
being used in any of the instructions.
For programs acting as exception boundary, ctx->fp_used remains false
even if frame pointer is used by the program and therefore, FP is not
set-up for such programs in the prologue. This can cause the kernel to
crash due to a pagefault.
Fix it by setting ctx->fp_used = true for exception boundary programs as
fp is always saved in such programs. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: media: atomisp: Fix stack buffer overflow in gmin_get_var_int()
When gmin_get_config_var() calls efi.get_variable() and the EFI variable
is larger than the expected buffer size, two behaviors combine to create
a stack buffer overflow:
1. gmin_get_config_var() does not return the proper error code when
efi.get_variable() fails. It returns the stale 'ret' value from
earlier operations instead of indicating the EFI failure.
2. When efi.get_variable() returns EFI_BUFFER_TOO_SMALL, it updates
*out_len to the required buffer size but writes no data to the output
buffer. However, due to bug #1, gmin_get_var_int() believes the call
succeeded.
The caller gmin_get_var_int() then performs:
- Allocates val[CFG_VAR_NAME_MAX + 1] (65 bytes) on stack
- Calls gmin_get_config_var(dev, is_gmin, var, val, &len) with len=64
- If EFI variable is >64 bytes, efi.get_variable() sets len=required_size
- Due to bug #1, thinks call succeeded with len=required_size
- Executes val[len] = 0, writing past end of 65-byte stack buffer
This creates a stack buffer overflow when EFI variables are larger than
64 bytes. Since EFI variables can be controlled by firmware or system
configuration, this could potentially be exploited for code execution.
Fix the bug by returning proper error codes from gmin_get_config_var()
based on EFI status instead of stale 'ret' value.
The gmin_get_var_int() function is called during device initialization
for camera sensor configuration on Intel Bay Trail and Cherry Trail
platforms using the atomisp camera stack. |
| In the Linux kernel, the following vulnerability has been resolved:
padata: Fix pd UAF once and for all
There is a race condition/UAF in padata_reorder that goes back
to the initial commit. A reference count is taken at the start
of the process in padata_do_parallel, and released at the end in
padata_serial_worker.
This reference count is (and only is) required for padata_replace
to function correctly. If padata_replace is never called then
there is no issue.
In the function padata_reorder which serves as the core of padata,
as soon as padata is added to queue->serial.list, and the associated
spin lock released, that padata may be processed and the reference
count on pd would go away.
Fix this by getting the next padata before the squeue->serial lock
is released.
In order to make this possible, simplify padata_reorder by only
calling it once the next padata arrives. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: xilinx: vcu: unregister pll_post only if registered correctly
If registration of pll_post is failed, it will be set to NULL or ERR,
unregistering same will fail with following call trace:
Unable to handle kernel NULL pointer dereference at virtual address 008
pc : clk_hw_unregister+0xc/0x20
lr : clk_hw_unregister_fixed_factor+0x18/0x30
sp : ffff800011923850
...
Call trace:
clk_hw_unregister+0xc/0x20
clk_hw_unregister_fixed_factor+0x18/0x30
xvcu_unregister_clock_provider+0xcc/0xf4 [xlnx_vcu]
xvcu_probe+0x2bc/0x53c [xlnx_vcu] |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix double destruction of rsv_qp
rsv_qp may be double destroyed in error flow, first in free_mr_init(),
and then in hns_roce_exit(). Fix it by moving the free_mr_init() call
into hns_roce_v2_init().
list_del corruption, ffff589732eb9b50->next is LIST_POISON1 (dead000000000100)
WARNING: CPU: 8 PID: 1047115 at lib/list_debug.c:53 __list_del_entry_valid+0x148/0x240
...
Call trace:
__list_del_entry_valid+0x148/0x240
hns_roce_qp_remove+0x4c/0x3f0 [hns_roce_hw_v2]
hns_roce_v2_destroy_qp_common+0x1dc/0x5f4 [hns_roce_hw_v2]
hns_roce_v2_destroy_qp+0x22c/0x46c [hns_roce_hw_v2]
free_mr_exit+0x6c/0x120 [hns_roce_hw_v2]
hns_roce_v2_exit+0x170/0x200 [hns_roce_hw_v2]
hns_roce_exit+0x118/0x350 [hns_roce_hw_v2]
__hns_roce_hw_v2_init_instance+0x1c8/0x304 [hns_roce_hw_v2]
hns_roce_hw_v2_reset_notify_init+0x170/0x21c [hns_roce_hw_v2]
hns_roce_hw_v2_reset_notify+0x6c/0x190 [hns_roce_hw_v2]
hclge_notify_roce_client+0x6c/0x160 [hclge]
hclge_reset_rebuild+0x150/0x5c0 [hclge]
hclge_reset+0x10c/0x140 [hclge]
hclge_reset_subtask+0x80/0x104 [hclge]
hclge_reset_service_task+0x168/0x3ac [hclge]
hclge_service_task+0x50/0x100 [hclge]
process_one_work+0x250/0x9a0
worker_thread+0x324/0x990
kthread+0x190/0x210
ret_from_fork+0x10/0x18 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Fix crash when rebind ccp device for ccp.ko
When CONFIG_CRYPTO_DEV_CCP_DEBUGFS is enabled, rebinding
the ccp device causes the following crash:
$ echo '0000:0a:00.2' > /sys/bus/pci/drivers/ccp/unbind
$ echo '0000:0a:00.2' > /sys/bus/pci/drivers/ccp/bind
[ 204.976930] BUG: kernel NULL pointer dereference, address: 0000000000000098
[ 204.978026] #PF: supervisor write access in kernel mode
[ 204.979126] #PF: error_code(0x0002) - not-present page
[ 204.980226] PGD 0 P4D 0
[ 204.981317] Oops: Oops: 0002 [#1] SMP NOPTI
...
[ 204.997852] Call Trace:
[ 204.999074] <TASK>
[ 205.000297] start_creating+0x9f/0x1c0
[ 205.001533] debugfs_create_dir+0x1f/0x170
[ 205.002769] ? srso_return_thunk+0x5/0x5f
[ 205.004000] ccp5_debugfs_setup+0x87/0x170 [ccp]
[ 205.005241] ccp5_init+0x8b2/0x960 [ccp]
[ 205.006469] ccp_dev_init+0xd4/0x150 [ccp]
[ 205.007709] sp_init+0x5f/0x80 [ccp]
[ 205.008942] sp_pci_probe+0x283/0x2e0 [ccp]
[ 205.010165] ? srso_return_thunk+0x5/0x5f
[ 205.011376] local_pci_probe+0x4f/0xb0
[ 205.012584] pci_device_probe+0xdb/0x230
[ 205.013810] really_probe+0xed/0x380
[ 205.015024] __driver_probe_device+0x7e/0x160
[ 205.016240] device_driver_attach+0x2f/0x60
[ 205.017457] bind_store+0x7c/0xb0
[ 205.018663] drv_attr_store+0x28/0x40
[ 205.019868] sysfs_kf_write+0x5f/0x70
[ 205.021065] kernfs_fop_write_iter+0x145/0x1d0
[ 205.022267] vfs_write+0x308/0x440
[ 205.023453] ksys_write+0x6d/0xe0
[ 205.024616] __x64_sys_write+0x1e/0x30
[ 205.025778] x64_sys_call+0x16ba/0x2150
[ 205.026942] do_syscall_64+0x56/0x1e0
[ 205.028108] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 205.029276] RIP: 0033:0x7fbc36f10104
[ 205.030420] Code: 89 02 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 8d 05 e1 08 2e 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 41 54 55 49 89 d4 53 48 89 f5
This patch sets ccp_debugfs_dir to NULL after destroying it in
ccp5_debugfs_destroy, allowing the directory dentry to be
recreated when rebinding the ccp device.
Tested on AMD Ryzen 7 1700X. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix inode use after free in ext4_end_io_rsv_work()
In ext4_io_end_defer_completion(), check if io_end->list_vec is empty to
avoid adding an io_end that requires no conversion to the
i_rsv_conversion_list, which in turn prevents starting an unnecessary
worker. An ext4_emergency_state() check is also added to avoid attempting
to abort the journal in an emergency state.
Additionally, ext4_put_io_end_defer() is refactored to call
ext4_io_end_defer_completion() directly instead of being open-coded.
This also prevents starting an unnecessary worker when EXT4_IO_END_FAILED
is set but data_err=abort is not enabled.
This ensures that the check in ext4_put_io_end_defer() is consistent with
the check in ext4_end_bio(). Otherwise, we might add an io_end to the
i_rsv_conversion_list and then call ext4_finish_bio(), after which the
inode could be freed before ext4_end_io_rsv_work() is called, triggering
a use-after-free issue. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix KMSAN uninit-value in extent_info usage
KMSAN reported a use of uninitialized value in `__is_extent_mergeable()`
and `__is_back_mergeable()` via the read extent tree path.
The root cause is that `get_read_extent_info()` only initializes three
fields (`fofs`, `blk`, `len`) of `struct extent_info`, leaving the
remaining fields uninitialized. This leads to undefined behavior
when those fields are accessed later, especially during
extent merging.
Fix it by zero-initializing the `extent_info` struct before population. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid UAF in f2fs_sync_inode_meta()
syzbot reported an UAF issue as below: [1] [2]
[1] https://syzkaller.appspot.com/text?tag=CrashReport&x=16594c60580000
==================================================================
BUG: KASAN: use-after-free in __list_del_entry_valid+0xa6/0x130 lib/list_debug.c:62
Read of size 8 at addr ffff888100567dc8 by task kworker/u4:0/8
CPU: 1 PID: 8 Comm: kworker/u4:0 Tainted: G W 6.1.129-syzkaller-00017-g642656a36791 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Workqueue: writeback wb_workfn (flush-7:0)
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x151/0x1b7 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:316 [inline]
print_report+0x158/0x4e0 mm/kasan/report.c:427
kasan_report+0x13c/0x170 mm/kasan/report.c:531
__asan_report_load8_noabort+0x14/0x20 mm/kasan/report_generic.c:351
__list_del_entry_valid+0xa6/0x130 lib/list_debug.c:62
__list_del_entry include/linux/list.h:134 [inline]
list_del_init include/linux/list.h:206 [inline]
f2fs_inode_synced+0x100/0x2e0 fs/f2fs/super.c:1553
f2fs_update_inode+0x72/0x1c40 fs/f2fs/inode.c:588
f2fs_update_inode_page+0x135/0x170 fs/f2fs/inode.c:706
f2fs_write_inode+0x416/0x790 fs/f2fs/inode.c:734
write_inode fs/fs-writeback.c:1460 [inline]
__writeback_single_inode+0x4cf/0xb80 fs/fs-writeback.c:1677
writeback_sb_inodes+0xb32/0x1910 fs/fs-writeback.c:1903
__writeback_inodes_wb+0x118/0x3f0 fs/fs-writeback.c:1974
wb_writeback+0x3da/0xa00 fs/fs-writeback.c:2081
wb_check_background_flush fs/fs-writeback.c:2151 [inline]
wb_do_writeback fs/fs-writeback.c:2239 [inline]
wb_workfn+0xbba/0x1030 fs/fs-writeback.c:2266
process_one_work+0x73d/0xcb0 kernel/workqueue.c:2299
worker_thread+0xa60/0x1260 kernel/workqueue.c:2446
kthread+0x26d/0x300 kernel/kthread.c:386
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
Allocated by task 298:
kasan_save_stack mm/kasan/common.c:45 [inline]
kasan_set_track+0x4b/0x70 mm/kasan/common.c:52
kasan_save_alloc_info+0x1f/0x30 mm/kasan/generic.c:505
__kasan_slab_alloc+0x6c/0x80 mm/kasan/common.c:333
kasan_slab_alloc include/linux/kasan.h:202 [inline]
slab_post_alloc_hook+0x53/0x2c0 mm/slab.h:768
slab_alloc_node mm/slub.c:3421 [inline]
slab_alloc mm/slub.c:3431 [inline]
__kmem_cache_alloc_lru mm/slub.c:3438 [inline]
kmem_cache_alloc_lru+0x102/0x270 mm/slub.c:3454
alloc_inode_sb include/linux/fs.h:3255 [inline]
f2fs_alloc_inode+0x2d/0x350 fs/f2fs/super.c:1437
alloc_inode fs/inode.c:261 [inline]
iget_locked+0x18c/0x7e0 fs/inode.c:1373
f2fs_iget+0x55/0x4ca0 fs/f2fs/inode.c:486
f2fs_lookup+0x3c1/0xb50 fs/f2fs/namei.c:484
__lookup_slow+0x2b9/0x3e0 fs/namei.c:1689
lookup_slow+0x5a/0x80 fs/namei.c:1706
walk_component+0x2e7/0x410 fs/namei.c:1997
lookup_last fs/namei.c:2454 [inline]
path_lookupat+0x16d/0x450 fs/namei.c:2478
filename_lookup+0x251/0x600 fs/namei.c:2507
vfs_statx+0x107/0x4b0 fs/stat.c:229
vfs_fstatat fs/stat.c:267 [inline]
vfs_lstat include/linux/fs.h:3434 [inline]
__do_sys_newlstat fs/stat.c:423 [inline]
__se_sys_newlstat+0xda/0x7c0 fs/stat.c:417
__x64_sys_newlstat+0x5b/0x70 fs/stat.c:417
x64_sys_call+0x52/0x9a0 arch/x86/include/generated/asm/syscalls_64.h:7
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x3b/0x80 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x68/0xd2
Freed by task 0:
kasan_save_stack mm/kasan/common.c:45 [inline]
kasan_set_track+0x4b/0x70 mm/kasan/common.c:52
kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:516
____kasan_slab_free+0x131/0x180 mm/kasan/common.c:241
__kasan_slab_free+0x11/0x20 mm/kasan/common.c:249
kasan_slab_free include/linux/kasan.h:178 [inline]
slab_free_hook mm/slub.c:1745 [inline]
slab_free_freelist_hook mm/slub.c:1771 [inline]
slab_free mm/slub.c:3686 [inline]
kmem_cache_free+0x
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid panic in f2fs_evict_inode
As syzbot [1] reported as below:
R10: 0000000000000100 R11: 0000000000000206 R12: 00007ffe17473450
R13: 00007f28b1c10854 R14: 000000000000dae5 R15: 00007ffe17474520
</TASK>
---[ end trace 0000000000000000 ]---
==================================================================
BUG: KASAN: use-after-free in __list_del_entry_valid+0xa6/0x130 lib/list_debug.c:62
Read of size 8 at addr ffff88812d962278 by task syz-executor/564
CPU: 1 PID: 564 Comm: syz-executor Tainted: G W 6.1.129-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack+0x21/0x24 lib/dump_stack.c:88
dump_stack_lvl+0xee/0x158 lib/dump_stack.c:106
print_address_description+0x71/0x210 mm/kasan/report.c:316
print_report+0x4a/0x60 mm/kasan/report.c:427
kasan_report+0x122/0x150 mm/kasan/report.c:531
__asan_report_load8_noabort+0x14/0x20 mm/kasan/report_generic.c:351
__list_del_entry_valid+0xa6/0x130 lib/list_debug.c:62
__list_del_entry include/linux/list.h:134 [inline]
list_del_init include/linux/list.h:206 [inline]
f2fs_inode_synced+0xf7/0x2e0 fs/f2fs/super.c:1531
f2fs_update_inode+0x74/0x1c40 fs/f2fs/inode.c:585
f2fs_update_inode_page+0x137/0x170 fs/f2fs/inode.c:703
f2fs_write_inode+0x4ec/0x770 fs/f2fs/inode.c:731
write_inode fs/fs-writeback.c:1460 [inline]
__writeback_single_inode+0x4a0/0xab0 fs/fs-writeback.c:1677
writeback_single_inode+0x221/0x8b0 fs/fs-writeback.c:1733
sync_inode_metadata+0xb6/0x110 fs/fs-writeback.c:2789
f2fs_sync_inode_meta+0x16d/0x2a0 fs/f2fs/checkpoint.c:1159
block_operations fs/f2fs/checkpoint.c:1269 [inline]
f2fs_write_checkpoint+0xca3/0x2100 fs/f2fs/checkpoint.c:1658
kill_f2fs_super+0x231/0x390 fs/f2fs/super.c:4668
deactivate_locked_super+0x98/0x100 fs/super.c:332
deactivate_super+0xaf/0xe0 fs/super.c:363
cleanup_mnt+0x45f/0x4e0 fs/namespace.c:1186
__cleanup_mnt+0x19/0x20 fs/namespace.c:1193
task_work_run+0x1c6/0x230 kernel/task_work.c:203
exit_task_work include/linux/task_work.h:39 [inline]
do_exit+0x9fb/0x2410 kernel/exit.c:871
do_group_exit+0x210/0x2d0 kernel/exit.c:1021
__do_sys_exit_group kernel/exit.c:1032 [inline]
__se_sys_exit_group kernel/exit.c:1030 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1030
x64_sys_call+0x7b4/0x9a0 arch/x86/include/generated/asm/syscalls_64.h:232
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x4c/0xa0 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x68/0xd2
RIP: 0033:0x7f28b1b8e169
Code: Unable to access opcode bytes at 0x7f28b1b8e13f.
RSP: 002b:00007ffe174710a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 00007f28b1c10879 RCX: 00007f28b1b8e169
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000001
RBP: 0000000000000002 R08: 00007ffe1746ee47 R09: 00007ffe17472360
R10: 0000000000000009 R11: 0000000000000246 R12: 00007ffe17472360
R13: 00007f28b1c10854 R14: 000000000000dae5 R15: 00007ffe17474520
</TASK>
Allocated by task 569:
kasan_save_stack mm/kasan/common.c:45 [inline]
kasan_set_track+0x4b/0x70 mm/kasan/common.c:52
kasan_save_alloc_info+0x25/0x30 mm/kasan/generic.c:505
__kasan_slab_alloc+0x72/0x80 mm/kasan/common.c:328
kasan_slab_alloc include/linux/kasan.h:201 [inline]
slab_post_alloc_hook+0x4f/0x2c0 mm/slab.h:737
slab_alloc_node mm/slub.c:3398 [inline]
slab_alloc mm/slub.c:3406 [inline]
__kmem_cache_alloc_lru mm/slub.c:3413 [inline]
kmem_cache_alloc_lru+0x104/0x220 mm/slub.c:3429
alloc_inode_sb include/linux/fs.h:3245 [inline]
f2fs_alloc_inode+0x2d/0x340 fs/f2fs/super.c:1419
alloc_inode fs/inode.c:261 [inline]
iget_locked+0x186/0x880 fs/inode.c:1373
f2fs_iget+0x55/0x4c60 fs/f2fs/inode.c:483
f2fs_lookup+0x366/0xab0 fs/f2fs/namei.c:487
__lookup_slow+0x2a3/0x3d0 fs/namei.c:1690
lookup_slow+0x57/0x70 fs/namei.c:1707
walk_component+0x2e6/0x410 fs/namei
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/eeh: Make EEH driver device hotplug safe
Multiple race conditions existed between the PCIe hotplug driver and the
EEH driver, leading to a variety of kernel oopses of the same general
nature:
<pcie device unplug>
<eeh driver trigger>
<hotplug removal trigger>
<pcie tree reconfiguration>
<eeh recovery next step>
<oops in EEH driver bus iteration loop>
A second class of oops is also seen when the underlying bus disappears
during device recovery.
Refactor the EEH module to be PCI rescan and remove safe. Also clean
up a few minor formatting / readability issues. |
| In the Linux kernel, the following vulnerability has been resolved:
pptp: ensure minimal skb length in pptp_xmit()
Commit aabc6596ffb3 ("net: ppp: Add bound checking for skb data
on ppp_sync_txmung") fixed ppp_sync_txmunge()
We need a similar fix in pptp_xmit(), otherwise we might
read uninit data as reported by syzbot.
BUG: KMSAN: uninit-value in pptp_xmit+0xc34/0x2720 drivers/net/ppp/pptp.c:193
pptp_xmit+0xc34/0x2720 drivers/net/ppp/pptp.c:193
ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2290 [inline]
ppp_input+0x1d6/0xe60 drivers/net/ppp/ppp_generic.c:2314
pppoe_rcv_core+0x1e8/0x760 drivers/net/ppp/pppoe.c:379
sk_backlog_rcv+0x142/0x420 include/net/sock.h:1148
__release_sock+0x1d3/0x330 net/core/sock.c:3213
release_sock+0x6b/0x270 net/core/sock.c:3767
pppoe_sendmsg+0x15d/0xcb0 drivers/net/ppp/pppoe.c:904
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x330/0x3d0 net/socket.c:727
____sys_sendmsg+0x893/0xd80 net/socket.c:2566
___sys_sendmsg+0x271/0x3b0 net/socket.c:2620
__sys_sendmmsg+0x2d9/0x7c0 net/socket.c:2709 |
| In the Linux kernel, the following vulnerability has been resolved:
spi: cs42l43: Property entry should be a null-terminated array
The software node does not specify a count of property entries, so the
array must be null-terminated.
When unterminated, this can lead to a fault in the downstream cs35l56
amplifier driver, because the node parse walks off the end of the
array into unknown memory. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: reject malicious packets in ipv6_gso_segment()
syzbot was able to craft a packet with very long IPv6 extension headers
leading to an overflow of skb->transport_header.
This 16bit field has a limited range.
Add skb_reset_transport_header_careful() helper and use it
from ipv6_gso_segment()
WARNING: CPU: 0 PID: 5871 at ./include/linux/skbuff.h:3032 skb_reset_transport_header include/linux/skbuff.h:3032 [inline]
WARNING: CPU: 0 PID: 5871 at ./include/linux/skbuff.h:3032 ipv6_gso_segment+0x15e2/0x21e0 net/ipv6/ip6_offload.c:151
Modules linked in:
CPU: 0 UID: 0 PID: 5871 Comm: syz-executor211 Not tainted 6.16.0-rc6-syzkaller-g7abc678e3084 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
RIP: 0010:skb_reset_transport_header include/linux/skbuff.h:3032 [inline]
RIP: 0010:ipv6_gso_segment+0x15e2/0x21e0 net/ipv6/ip6_offload.c:151
Call Trace:
<TASK>
skb_mac_gso_segment+0x31c/0x640 net/core/gso.c:53
nsh_gso_segment+0x54a/0xe10 net/nsh/nsh.c:110
skb_mac_gso_segment+0x31c/0x640 net/core/gso.c:53
__skb_gso_segment+0x342/0x510 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x857/0x11b0 net/core/dev.c:3950
validate_xmit_skb_list+0x84/0x120 net/core/dev.c:4000
sch_direct_xmit+0xd3/0x4b0 net/sched/sch_generic.c:329
__dev_xmit_skb net/core/dev.c:4102 [inline]
__dev_queue_xmit+0x17b6/0x3a70 net/core/dev.c:4679 |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: fix client side handling of tls alerts
A security exploit was discovered in NFS over TLS in tls_alert_recv
due to its assumption that there is valid data in the msghdr's
iterator's kvec.
Instead, this patch proposes the rework how control messages are
setup and used by sock_recvmsg().
If no control message structure is setup, kTLS layer will read and
process TLS data record types. As soon as it encounters a TLS control
message, it would return an error. At that point, NFS can setup a kvec
backed control buffer and read in the control message such as a TLS
alert. Scott found that a msg iterator can advance the kvec pointer
as a part of the copy process thus we need to revert the iterator
before calling into the tls_alert_recv. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: unlink NAPIs from queues on error to open
CI hit a UaF in fbnic in the AF_XDP portion of the queues.py test.
The UaF is in the __sk_mark_napi_id_once() call in xsk_bind(),
NAPI has been freed. Looks like the device failed to open earlier,
and we lack clearing the NAPI pointer from the queue. |
| In the Linux kernel, the following vulnerability has been resolved:
benet: fix BUG when creating VFs
benet crashes as soon as SRIOV VFs are created:
kernel BUG at mm/vmalloc.c:3457!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 4 UID: 0 PID: 7408 Comm: test.sh Kdump: loaded Not tainted 6.16.0+ #1 PREEMPT(voluntary)
[...]
RIP: 0010:vunmap+0x5f/0x70
[...]
Call Trace:
<TASK>
__iommu_dma_free+0xe8/0x1c0
be_cmd_set_mac_list+0x3fe/0x640 [be2net]
be_cmd_set_mac+0xaf/0x110 [be2net]
be_vf_eth_addr_config+0x19f/0x330 [be2net]
be_vf_setup+0x4f7/0x990 [be2net]
be_pci_sriov_configure+0x3a1/0x470 [be2net]
sriov_numvfs_store+0x20b/0x380
kernfs_fop_write_iter+0x354/0x530
vfs_write+0x9b9/0xf60
ksys_write+0xf3/0x1d0
do_syscall_64+0x8c/0x3d0
be_cmd_set_mac_list() calls dma_free_coherent() under a spin_lock_bh.
Fix it by freeing only after the lock has been released. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: mqprio: fix stack out-of-bounds write in tc entry parsing
TCA_MQPRIO_TC_ENTRY_INDEX is validated using
NLA_POLICY_MAX(NLA_U32, TC_QOPT_MAX_QUEUE), which allows the value
TC_QOPT_MAX_QUEUE (16). This leads to a 4-byte out-of-bounds stack
write in the fp[] array, which only has room for 16 elements (0–15).
Fix this by changing the policy to allow only up to TC_QOPT_MAX_QUEUE - 1. |
