| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| vLLM through 0.29.0 contains a denial of service vulnerability in the NIXL connector's prefix caching implementation that fails to properly validate block counts across multi-prompt completion requests in prefill/decode disaggregated deployments. Attackers can trigger an assertion failure in NixlBaseConnectorWorker._apply_prefix_caching by submitting completion requests with multiple prompts of varying lengths, causing the decode worker to terminate and become unavailable until restarted. |
| vLLM Mooncake connector through 0.29.0 fails to properly manage GPU KV cache block ownership when concurrent child requests share a single transfer ID in prefill/decode disaggregated deployments. Attackers can trigger GPU memory exhaustion by submitting completion requests with multiple prompts, causing orphaned KV cache blocks to accumulate until process restart and eventually preventing legitimate requests from executing. |
| joi (npm package `joi`, hapi.js) versions >=17.2.0 <17.13.7 and >=18.0.0 <18.2.6 are vulnerable to regular expression denial of service in the `Joi.string().isoDate()` validation rule. One of the regular expressions the rule applies to the input is unanchored, so a valid ISO date followed by a long run of fractional-second digits causes the regex engine to restart its search from every position in the string, yielding time proportional to the square of the input length (about 1.4 s for 64 KB of digits and about 22 s for 256 KB). A remote attacker who can supply a string to an isoDate validation can stall the application with a single request. Fixed in 17.13.7 and 18.2.6; as a workaround, cap the length of the string before it reaches joi. |
| rustls-webpki (rustls/webpki) versions 0.101.0 through 0.103.11 and 0.104.0-alpha releases before 0.104.0-alpha.6 ignore X.509 name constraints that apply to URI names, causing such constraints to be accepted rather than enforced. Because name constraints are restrictions on otherwise properly issued certificates, the flaw is only reachable after successful signature verification and requires a misissued certificate to exploit; the library also provides no API for asserting URI names, and URI name constraints are otherwise unimplemented. Versions 0.103.12 and 0.104.0-alpha.6 reject URI name constraints unconditionally. |
| uri-js through 4.4.1 contains a denial of service vulnerability in the removeDotSegments function that loops infinitely when a path segment begins with Unicode line or paragraph separators. Attackers can trigger this by calling removeDotSegments directly or through normalize/resolve functions with IRI handling enabled, causing the Node.js event loop to block indefinitely until heap exhaustion. |
| Nodemailer (npm package `nodemailer`) versions 9.1.0 and earlier do not honor the `disableFileAccess` and `disableUrlAccess` sandbox options when message content is resolved through the public plugin API `MailMessage.resolveContent()` using the documented legacy three-argument signature `resolveContent(data, key, callback)`. Because `shared.resolveContent()` normalizes the missing `options` argument to an empty object, the message-level flags copied into `mail.data` by the MailMessage constructor are discarded, and `resolveContentValue()` skips both access-control checks, reaching `nmfetch(url)` or `fs.createReadStream(path)`. As a result, plugin or application code that resolves untrusted message content (html, text, attachment `path` or `href`) via this API can be induced to read arbitrary local files or issue outbound HTTP(S) requests (server-side request forgery), bypassing the sandbox the application enabled. The internal paths used by `transporter.sendMail()` (`resolveAll()`, `_convertDataImages()`, and the MIME streaming path) are not affected. Fixed in version 9.1.1. |
| Nodemailer versions >= 6.9.16 and < 9.1.0 mis-parse RFC 5322 comments in email addresses: in lib/addressparser, a comment closed immediately before a non-break character causes the tokenizer to concatenate the atoms surrounding the comment instead of treating the comment as folding whitespace that terminates the domain. A recipient address such as user@good-corp.com(x)evil.com is therefore read by Nodemailer as the single domain good-corp.comevil.com (registrable domain comevil.com, which an attacker can register) and used for both the SMTP envelope (RCPT TO) and the emitted To:/From: headers, while a conformant RFC 5322 parser terminates the domain at the comment and reads good-corp.com. An application that validates the recipient domain with a strict RFC 5322 parser (without inspecting parse defects) or a naive prefix/substring allow-list and then hands the raw address to Nodemailer can be induced to deliver mail to a domain the attacker controls. Fixed in 9.1.0. |
| vLLM versions before 0.28.0 fail to validate the lower bound of token IDs in the /v1/embeddings and /pooling endpoints, allowing unauthenticated attackers to crash the engine by submitting negative token IDs. A single request with a negative token ID triggers a CUDA device-side assertion that poisons the GPU context, causing all subsequent requests to fail until the process restarts. |
| rustls-webpki through 0.103.12 (and 0.104.0-alpha releases before 0.104.0-alpha.7) contains a reachable panic in bit_string_flags() in src/der.rs. The input guard fails to reject a named-bit BIT STRING whose content is exactly [0x00] (zero padding bits and no data bytes), so raw_bits.len() - 1 underflows on the empty slice and the subsequent index operation panics (subtract-with-overflow in debug, index-out-of-bounds in release). The condition is reachable through the public API BorrowedCertRevocationList::from_der() when a CRL contains an issuingDistributionPoint extension with such an onlySomeReasons value. Exploitation requires an application that explicitly opts in to CRL revocation checking by passing RevocationOptions to verify_for_usage() and that parses CRL bytes obtained from a source the attacker can influence; the default rustls configuration, which does not use RevocationOptions, is unaffected. A crafted CRL causes a denial of service via the panic. Fixed in 0.103.13 and 0.104.0-alpha.7. |
| rustls-webpki versions before 0.103.10 and 0.104.0-alpha.5 contain faulty CRL authority-matching logic that compares only the first distributionPoint against each CRL's IssuingDistributionPoint, ignoring additional distributionPoints. Attackers with a compromised trusted issuing authority can present revoked certificates that pass revocation checks under UnknownStatusPolicy::Allow, or cause incorrect errors under the default deny policy. |
| CSSOM through 0.5.0 contains a denial of service vulnerability in CSSStyleDeclaration.setProperty() that fails to validate reserved property names. Attackers can supply a stylesheet with a declaration named length to replace the internal counter and trigger excessive memory allocation during cssText serialization, causing process termination. |
| vLLM before 0.29.0 validates allowed_token_ids against tokenizer length instead of model output logits width in SamplingParams._validate_allowed_token_ids(). Attackers can supply token IDs above the output vocabulary that pass validation, causing LogitBiasState to corrupt GPU logits state and allow concurrent requests to sample tokens outside their allowlists. |
| vLLM through 0.29.0 fails to properly validate bad_words token indices against the model's generation output width in SamplingParams.update_from_tokenizer(). Attackers can supply out-of-bounds token indices that corrupt logits memory of concurrent requests, causing different in-flight HTTP requests to return incorrect tokens. |
| ImageMagick before 7.1.2-31 and before 6.9.13-56 contains a use-after-free vulnerability in the ImagesToBlob method, caused by a pointer that is not updated correctly. Exploitation may result in a limited availability impact (e.g., a crash of the affected process). The issue is fixed in versions 7.1.2-31 and 6.9.13-56. |
| ImageMagick before 7.1.2-31 and 6.9.13-56 contains a division-by-zero flaw in the FLIF encoder. An incorrect value for ticks per second in the image being encoded causes a divide-by-zero and crashes the encoder, resulting in a denial of service. The issue is fixed in 7.1.2-31 and 6.9.13-56. |
| The Okta Access Gateway backup restore function does not validate the filename embedded in an encrypted backup payload. This results in writing file contents to unintended locations on the appliance filesystem. |
| The Tauri updater plugin's 'check' IPC command accepts an allowDowngrades boolean parameter directly from frontend JavaScript code. When set to true, it replaces the version comparator from "update must be newer" to "update must be different." Because the default permission set grants allow-check to the webview, any XSS in the app frontend can invoke this command and bypass the only anti-rollback protection the updater offers. Combined with another bug, this enables downgrade attacks without even needing to fake a higher version number. |
| Dancer2 versions from 2.1.0 before 2.2.0 for Perl serve files from outside public_dir via relative path segments in the File route handler.
The handler joins the request path onto public_dir without collapsing relative segments, and checks only that the result is a readable regular file. A request for `/../outside.txt` escapes public_dir, and percent-encoding the dots reaches the same file.
The handler is off by default. An application is affected once it names File in route_handlers and sets static_handler to 0, which otherwise refuses a dot segment before the route runs.
Any file the worker process can read is served to an unauthenticated request, including the application's config.yml above public_dir. |
| Dancer2 versions before 2.2.0 for Perl do not strip CR and LF from response header names in headers_to_array.
The routine removes CR and LF from each header value but not from the name. A name carrying them therefore reaches the PSGI server intact. A server that does not validate keys writes it to the wire, so the bytes after the CRLF arrive as their own header line.
The application has to derive the header name from request data, not just the value.
An attacker who controls that data adds their own headers and splits the response. |
| Dancer2 versions from 2.0.0 before 2.2.0 for Perl dispatch a route that a dying hook refused when the exception handler halts the response in compile_hooks.
A hook that dies fires core.app.hook_exception, then calls cleanup unless the failing hook is the exception handler. A handler that halts does not stop that cleanup, which discards the request, response and session the dispatcher has yet to read, so the refused route runs.
The handler has to halt the response object by calling its halt method or setting is_halted: the halt keyword unwinds through with_return before cleanup runs.
A check in a before hook is not enforced: the caller gets the refusal, while the route body runs and its writes land. |
