| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix missing hugetlb_lock for resv uncharge
There is a recent report on UFFDIO_COPY over hugetlb:
https://lore.kernel.org/all/000000000000ee06de0616177560@google.com/
350: lockdep_assert_held(&hugetlb_lock);
Should be an issue in hugetlb but triggered in an userfault context, where
it goes into the unlikely path where two threads modifying the resv map
together. Mike has a fix in that path for resv uncharge but it looks like
the locking criteria was overlooked: hugetlb_cgroup_uncharge_folio_rsvd()
will update the cgroup pointer, so it requires to be called with the lock
held. |
| Improper handling of symbolic links in Ivanti Connect Secure before version 22.7R2.8 or 22.8R2, Ivanti Policy Secure before 22.7R1.5, Ivanti ZTA Gateway before 22.8R2.3-723 and Ivanti Neurons for Secure Access before 22.8R1.4 (Fix deployed on 02-Aug-2025) allows a local authenticated attacker to read arbitrary files on disk. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix WARN_ON in iommu probe path
Commit 1a75cc710b95 ("iommu/vt-d: Use rbtree to track iommu probed
devices") adds all devices probed by the iommu driver in a rbtree
indexed by the source ID of each device. It assumes that each device
has a unique source ID. This assumption is incorrect and the VT-d
spec doesn't state this requirement either.
The reason for using a rbtree to track devices is to look up the device
with PCI bus and devfunc in the paths of handling ATS invalidation time
out error and the PRI I/O page faults. Both are PCI ATS feature related.
Only track the devices that have PCI ATS capabilities in the rbtree to
avoid unnecessary WARN_ON in the iommu probe path. Otherwise, on some
platforms below kernel splat will be displayed and the iommu probe results
in failure.
WARNING: CPU: 3 PID: 166 at drivers/iommu/intel/iommu.c:158 intel_iommu_probe_device+0x319/0xd90
Call Trace:
<TASK>
? __warn+0x7e/0x180
? intel_iommu_probe_device+0x319/0xd90
? report_bug+0x1f8/0x200
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? intel_iommu_probe_device+0x319/0xd90
? debug_mutex_init+0x37/0x50
__iommu_probe_device+0xf2/0x4f0
iommu_probe_device+0x22/0x70
iommu_bus_notifier+0x1e/0x40
notifier_call_chain+0x46/0x150
blocking_notifier_call_chain+0x42/0x60
bus_notify+0x2f/0x50
device_add+0x5ed/0x7e0
platform_device_add+0xf5/0x240
mfd_add_devices+0x3f9/0x500
? preempt_count_add+0x4c/0xa0
? up_write+0xa2/0x1b0
? __debugfs_create_file+0xe3/0x150
intel_lpss_probe+0x49f/0x5b0
? pci_conf1_write+0xa3/0xf0
intel_lpss_pci_probe+0xcf/0x110 [intel_lpss_pci]
pci_device_probe+0x95/0x120
really_probe+0xd9/0x370
? __pfx___driver_attach+0x10/0x10
__driver_probe_device+0x73/0x150
driver_probe_device+0x19/0xa0
__driver_attach+0xb6/0x180
? __pfx___driver_attach+0x10/0x10
bus_for_each_dev+0x77/0xd0
bus_add_driver+0x114/0x210
driver_register+0x5b/0x110
? __pfx_intel_lpss_pci_driver_init+0x10/0x10 [intel_lpss_pci]
do_one_initcall+0x57/0x2b0
? kmalloc_trace+0x21e/0x280
? do_init_module+0x1e/0x210
do_init_module+0x5f/0x210
load_module+0x1d37/0x1fc0
? init_module_from_file+0x86/0xd0
init_module_from_file+0x86/0xd0
idempotent_init_module+0x17c/0x230
__x64_sys_finit_module+0x56/0xb0
do_syscall_64+0x6e/0x140
entry_SYSCALL_64_after_hwframe+0x71/0x79 |
| CubeCart is an ecommerce software solution. Prior to version 6.5.11, there is an absence of automatic session expiration following a user's password change. This oversight poses a security risk, as if a user forgets to log out from a location where they accessed their account, an unauthorized user can maintain access even after the password has been changed. Due to this bug, if an account has already been compromised, the legitimate user has no way to revoke the attacker’s access. The malicious actor retains full access to the account until their session naturally expires. This means the account remains insecure even after the password has been changed. This issue has been patched in version 6.5.11. |
| A vulnerability has been identified in Polarion V2310 (All versions), Polarion V2404 (All versions < V2404.4). The affected application contains a XML External Entity Injection (XXE) vulnerability in the docx import feature. This could allow an authenticated remote attacker to read arbitrary data from the application server. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix bug_on in __es_tree_search
Hulk Robot reported a BUG_ON:
==================================================================
kernel BUG at fs/ext4/extents_status.c:199!
[...]
RIP: 0010:ext4_es_end fs/ext4/extents_status.c:199 [inline]
RIP: 0010:__es_tree_search+0x1e0/0x260 fs/ext4/extents_status.c:217
[...]
Call Trace:
ext4_es_cache_extent+0x109/0x340 fs/ext4/extents_status.c:766
ext4_cache_extents+0x239/0x2e0 fs/ext4/extents.c:561
ext4_find_extent+0x6b7/0xa20 fs/ext4/extents.c:964
ext4_ext_map_blocks+0x16b/0x4b70 fs/ext4/extents.c:4384
ext4_map_blocks+0xe26/0x19f0 fs/ext4/inode.c:567
ext4_getblk+0x320/0x4c0 fs/ext4/inode.c:980
ext4_bread+0x2d/0x170 fs/ext4/inode.c:1031
ext4_quota_read+0x248/0x320 fs/ext4/super.c:6257
v2_read_header+0x78/0x110 fs/quota/quota_v2.c:63
v2_check_quota_file+0x76/0x230 fs/quota/quota_v2.c:82
vfs_load_quota_inode+0x5d1/0x1530 fs/quota/dquot.c:2368
dquot_enable+0x28a/0x330 fs/quota/dquot.c:2490
ext4_quota_enable fs/ext4/super.c:6137 [inline]
ext4_enable_quotas+0x5d7/0x960 fs/ext4/super.c:6163
ext4_fill_super+0xa7c9/0xdc00 fs/ext4/super.c:4754
mount_bdev+0x2e9/0x3b0 fs/super.c:1158
mount_fs+0x4b/0x1e4 fs/super.c:1261
[...]
==================================================================
Above issue may happen as follows:
-------------------------------------
ext4_fill_super
ext4_enable_quotas
ext4_quota_enable
ext4_iget
__ext4_iget
ext4_ext_check_inode
ext4_ext_check
__ext4_ext_check
ext4_valid_extent_entries
Check for overlapping extents does't take effect
dquot_enable
vfs_load_quota_inode
v2_check_quota_file
v2_read_header
ext4_quota_read
ext4_bread
ext4_getblk
ext4_map_blocks
ext4_ext_map_blocks
ext4_find_extent
ext4_cache_extents
ext4_es_cache_extent
ext4_es_cache_extent
__es_tree_search
ext4_es_end
BUG_ON(es->es_lblk + es->es_len < es->es_lblk)
The error ext4 extents is as follows:
0af3 0300 0400 0000 00000000 extent_header
00000000 0100 0000 12000000 extent1
00000000 0100 0000 18000000 extent2
02000000 0400 0000 14000000 extent3
In the ext4_valid_extent_entries function,
if prev is 0, no error is returned even if lblock<=prev.
This was intended to skip the check on the first extent, but
in the error image above, prev=0+1-1=0 when checking the second extent,
so even though lblock<=prev, the function does not return an error.
As a result, bug_ON occurs in __es_tree_search and the system panics.
To solve this problem, we only need to check that:
1. The lblock of the first extent is not less than 0.
2. The lblock of the next extent is not less than
the next block of the previous extent.
The same applies to extent_idx. |
| TopQuadrant TopBraid EDG before version 8.0.1 allows an authenticated attacker to upload an XML DTD file and execute JavaScript to read local files or access URLs (XXE). Fixed in 8.0.1 (bug fix: TBS-6721). |
| Jerryscript commit cefd391 was discovered to contain an Assertion Failure via ECMA_STRING_IS_REF_EQUALS_TO_ONE (string_p) in ecma_free_string_list. |
| QuickJS commit 3b45d15 was discovered to contain an Assertion Failure via JS_FreeRuntime(JSRuntime *) at quickjs.c. |
| The WebAssembly Micro Runtime's (WAMR) iwasm package is the executable binary built with WAMR VMcore which supports WebAssembly System Interface (WASI) and command line interface. Anyone running WAMR up to and including version 2.2.0 or WAMR built with libc-uvwasi on Windows is affected by a symlink following vulnerability. On WAMR running in Windows, creating a symlink pointing outside of the preopened directory and subsequently opening it with create flag will create a file on host outside of the sandbox. If the symlink points to an existing host file, it's also possible to open it and read its content. Version 2.3.0 fixes the issue. |
| xzs-mysql 3.8 is vulnerable to Insufficient Session Expiration, which allows attackers to use the session of a deleted admin to do anything. |
| Weblate is a web based localization tool. Versions lower than 5.13.1 contain a vulnerability that causes long session expiry during the second factor verification. The long session expiry could be used to circumvent rate limiting of the second factor. This issue is fixed in version 5.13.1. |
| In the Linux kernel, the following vulnerability has been resolved:
kprobes/x86: Use copy_from_kernel_nofault() to read from unsafe address
Read from an unsafe address with copy_from_kernel_nofault() in
arch_adjust_kprobe_addr() because this function is used before checking
the address is in text or not. Syzcaller bot found a bug and reported
the case if user specifies inaccessible data area,
arch_adjust_kprobe_addr() will cause a kernel panic.
[ mingo: Clarified the comment. ] |
| A vulnerability was determined in JasPer up to 4.2.5. Affected by this issue is the function jpc_floorlog2 of the file src/libjasper/jpc/jpc_enc.c of the component JPEG2000 Encoder. The manipulation leads to reachable assertion. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. The patch is identified as 79185d32d7a444abae441935b20ae4676b3513d4. It is recommended to apply a patch to fix this issue. |
| A vulnerability was determined in jqlang jq up to 1.6. Impacted is the function run_jq_tests of the file jq_test.c of the component JSON Parser. Executing manipulation can lead to reachable assertion. The attack requires local access. The exploit has been publicly disclosed and may be utilized. Other versions might be affected as well. |
| SimpleXML (latest version 2.7.1) is vulnerable to an XXE vulnerability resulting SSRF, information disclosure, DoS and so on. |
| An issue was discovered in weixin-java-tools v3.3.0. There is an XXE vulnerability in the getXmlDoc method of the BaseWxPayResult.java file. NOTE: this issue exists because of an incomplete fix for CVE-2018-20318. |
| A vulnerability, which was classified as problematic, was found in Axiomatic Bento4 up to 1.6.0-641. Affected is the function AP4_DataBuffer::SetDataSize of the file Mp4Decrypt.cpp of the component mp4decrypt. The manipulation leads to allocation of resources. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. |
| Fides is an open-source privacy engineering platform. Prior to version 2.69.1, admin UI user password changes in Fides do not invalidate active user sessions, creating a vulnerability chaining opportunity where attackers who have obtained session tokens through other attack vectors (such as XSS) can maintain access even after password reset. This issue is not directly exploitable on its own and requires a prerequisite vulnerability to obtain valid session tokens in the first place. Version 2.69.1 fixes the issue. No known workarounds are available. |
| Shopware 6 is an open commerce platform based on Symfony Framework and Vue. Starting in version 6.3.5.0 and prior to versions 6.6.1.0 and 6.5.8.8, when a authenticated request is made to `POST /store-api/account/logout`, the cart will be cleared, but the User won't be logged out. This affects only the direct store-api usage, as the PHP Storefront listens additionally on `CustomerLogoutEvent` and invalidates the session additionally. The problem has been fixed in Shopware 6.6.1.0 and 6.5.8.8. Those who are unable to update can install the latest version of the Shopware Security Plugin as a workaround.
|
