| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: nuvoton: fix a double free in ma35_pinctrl_dt_node_to_map_func()
'new_map' is allocated using devm_* which takes care of freeing the
allocated data on device removal, call to
.dt_free_map = pinconf_generic_dt_free_map
double frees the map as pinconf_generic_dt_free_map() calls
pinctrl_utils_free_map().
Fix this by using kcalloc() instead of auto-managed devm_kcalloc(). |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: apple: check devm_kasprintf() returned value
devm_kasprintf() can return a NULL pointer on failure but this returned
value is not checked. Fix this lack and check the returned value.
Found by code review. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/tests/sysfs-kunit.h: fix memory leak in damon_sysfs_test_add_targets()
The sysfs_target->regions allocated in damon_sysfs_regions_alloc() is not
freed in damon_sysfs_test_add_targets(), which cause the following memory
leak, free it to fix it.
unreferenced object 0xffffff80c2a8db80 (size 96):
comm "kunit_try_catch", pid 187, jiffies 4294894363
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 0):
[<0000000001e3714d>] kmemleak_alloc+0x34/0x40
[<000000008e6835c1>] __kmalloc_cache_noprof+0x26c/0x2f4
[<000000001286d9f8>] damon_sysfs_test_add_targets+0x1cc/0x738
[<0000000032ef8f77>] kunit_try_run_case+0x13c/0x3ac
[<00000000f3edea23>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<00000000adf936cf>] kthread+0x2e8/0x374
[<0000000041bb1628>] ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: enable all safety features by default
In the original implementation of dwmac5
commit 8bf993a5877e ("net: stmmac: Add support for DWMAC5 and implement Safety Features")
all safety features were enabled by default.
Later it seems some implementations didn't have support for all the
features, so in
commit 5ac712dcdfef ("net: stmmac: enable platform specific safety features")
the safety_feat_cfg structure was added to the callback and defined for
some platforms to selectively enable these safety features.
The problem is that only certain platforms were given that software
support. If the automotive safety package bit is set in the hardware
features register the safety feature callback is called for the platform,
and for platforms that didn't get a safety_feat_cfg defined this results
in the following NULL pointer dereference:
[ 7.933303] Call trace:
[ 7.935812] dwmac5_safety_feat_config+0x20/0x170 [stmmac]
[ 7.941455] __stmmac_open+0x16c/0x474 [stmmac]
[ 7.946117] stmmac_open+0x38/0x70 [stmmac]
[ 7.950414] __dev_open+0x100/0x1dc
[ 7.954006] __dev_change_flags+0x18c/0x204
[ 7.958297] dev_change_flags+0x24/0x6c
[ 7.962237] do_setlink+0x2b8/0xfa4
[ 7.965827] __rtnl_newlink+0x4ec/0x840
[ 7.969766] rtnl_newlink+0x50/0x80
[ 7.973353] rtnetlink_rcv_msg+0x12c/0x374
[ 7.977557] netlink_rcv_skb+0x5c/0x130
[ 7.981500] rtnetlink_rcv+0x18/0x2c
[ 7.985172] netlink_unicast+0x2e8/0x340
[ 7.989197] netlink_sendmsg+0x1a8/0x420
[ 7.993222] ____sys_sendmsg+0x218/0x280
[ 7.997249] ___sys_sendmsg+0xac/0x100
[ 8.001103] __sys_sendmsg+0x84/0xe0
[ 8.004776] __arm64_sys_sendmsg+0x24/0x30
[ 8.008983] invoke_syscall+0x48/0x114
[ 8.012840] el0_svc_common.constprop.0+0xcc/0xec
[ 8.017665] do_el0_svc+0x38/0xb0
[ 8.021071] el0_svc+0x2c/0x84
[ 8.024212] el0t_64_sync_handler+0xf4/0x120
[ 8.028598] el0t_64_sync+0x190/0x194
Go back to the original behavior, if the automotive safety package
is found to be supported in hardware enable all the features unless
safety_feat_cfg is passed in saying this particular platform only
supports a subset of the features. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: fix potential memory leaks in session setup
Make sure to free cifs_ses::auth_key.response before allocating it as
we might end up leaking memory in reconnect or mounting. |
| In the Linux kernel, the following vulnerability has been resolved:
trace_events_hist: add check for return value of 'create_hist_field'
Function 'create_hist_field' is called recursively at
trace_events_hist.c:1954 and can return NULL-value that's why we have
to check it to avoid null pointer dereference.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Fix a memory leak with reused mmap_offset
drm_vma_node_allow() and drm_vma_node_revoke() should be called in
balanced pairs. We call drm_vma_node_allow() once per-file everytime a
user calls mmap_offset, but only call drm_vma_node_revoke once per-file
on each mmap_offset. As the mmap_offset is reused by the client, the
per-file vm_count may remain non-zero and the rbtree leaked.
Call drm_vma_node_allow_once() instead to prevent that memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
acpi: Fix suspend with Xen PV
Commit f1e525009493 ("x86/boot: Skip realmode init code when running as
Xen PV guest") missed one code path accessing real_mode_header, leading
to dereferencing NULL when suspending the system under Xen:
[ 348.284004] PM: suspend entry (deep)
[ 348.289532] Filesystems sync: 0.005 seconds
[ 348.291545] Freezing user space processes ... (elapsed 0.000 seconds) done.
[ 348.292457] OOM killer disabled.
[ 348.292462] Freezing remaining freezable tasks ... (elapsed 0.104 seconds) done.
[ 348.396612] printk: Suspending console(s) (use no_console_suspend to debug)
[ 348.749228] PM: suspend devices took 0.352 seconds
[ 348.769713] ACPI: EC: interrupt blocked
[ 348.816077] BUG: kernel NULL pointer dereference, address: 000000000000001c
[ 348.816080] #PF: supervisor read access in kernel mode
[ 348.816081] #PF: error_code(0x0000) - not-present page
[ 348.816083] PGD 0 P4D 0
[ 348.816086] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 348.816089] CPU: 0 PID: 6764 Comm: systemd-sleep Not tainted 6.1.3-1.fc32.qubes.x86_64 #1
[ 348.816092] Hardware name: Star Labs StarBook/StarBook, BIOS 8.01 07/03/2022
[ 348.816093] RIP: e030:acpi_get_wakeup_address+0xc/0x20
Fix that by adding an optional acpi callback allowing to skip setting
the wakeup address, as in the Xen PV case this will be handled by the
hypervisor anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/i8259: Mark legacy PIC interrupts with IRQ_LEVEL
Baoquan reported that after triggering a crash the subsequent crash-kernel
fails to boot about half of the time. It triggers a NULL pointer
dereference in the periodic tick code.
This happens because the legacy timer interrupt (IRQ0) is resent in
software which happens in soft interrupt (tasklet) context. In this context
get_irq_regs() returns NULL which leads to the NULL pointer dereference.
The reason for the resend is a spurious APIC interrupt on the IRQ0 vector
which is captured and leads to a resend when the legacy timer interrupt is
enabled. This is wrong because the legacy PIC interrupts are level
triggered and therefore should never be resent in software, but nothing
ever sets the IRQ_LEVEL flag on those interrupts, so the core code does not
know about their trigger type.
Ensure that IRQ_LEVEL is set when the legacy PCI interrupts are set up. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix NULL pointer in skb_segment_list
Commit 3a1296a38d0c ("net: Support GRO/GSO fraglist chaining.")
introduced UDP listifyed GRO. The segmentation relies on frag_list being
untouched when passing through the network stack. This assumption can be
broken sometimes, where frag_list itself gets pulled into linear area,
leaving frag_list being NULL. When this happens it can trigger
following NULL pointer dereference, and panic the kernel. Reverse the
test condition should fix it.
[19185.577801][ C1] BUG: kernel NULL pointer dereference, address:
...
[19185.663775][ C1] RIP: 0010:skb_segment_list+0x1cc/0x390
...
[19185.834644][ C1] Call Trace:
[19185.841730][ C1] <TASK>
[19185.848563][ C1] __udp_gso_segment+0x33e/0x510
[19185.857370][ C1] inet_gso_segment+0x15b/0x3e0
[19185.866059][ C1] skb_mac_gso_segment+0x97/0x110
[19185.874939][ C1] __skb_gso_segment+0xb2/0x160
[19185.883646][ C1] udp_queue_rcv_skb+0xc3/0x1d0
[19185.892319][ C1] udp_unicast_rcv_skb+0x75/0x90
[19185.900979][ C1] ip_protocol_deliver_rcu+0xd2/0x200
[19185.910003][ C1] ip_local_deliver_finish+0x44/0x60
[19185.918757][ C1] __netif_receive_skb_one_core+0x8b/0xa0
[19185.927834][ C1] process_backlog+0x88/0x130
[19185.935840][ C1] __napi_poll+0x27/0x150
[19185.943447][ C1] net_rx_action+0x27e/0x5f0
[19185.951331][ C1] ? mlx5_cq_tasklet_cb+0x70/0x160 [mlx5_core]
[19185.960848][ C1] __do_softirq+0xbc/0x25d
[19185.968607][ C1] irq_exit_rcu+0x83/0xb0
[19185.976247][ C1] common_interrupt+0x43/0xa0
[19185.984235][ C1] asm_common_interrupt+0x22/0x40
...
[19186.094106][ C1] </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
firewire: fix memory leak for payload of request subaction to IEC 61883-1 FCP region
This patch is fix for Linux kernel v2.6.33 or later.
For request subaction to IEC 61883-1 FCP region, Linux FireWire subsystem
have had an issue of use-after-free. The subsystem allows multiple
user space listeners to the region, while data of the payload was likely
released before the listeners execute read(2) to access to it for copying
to user space.
The issue was fixed by a commit 281e20323ab7 ("firewire: core: fix
use-after-free regression in FCP handler"). The object of payload is
duplicated in kernel space for each listener. When the listener executes
ioctl(2) with FW_CDEV_IOC_SEND_RESPONSE request, the object is going to
be released.
However, it causes memory leak since the commit relies on call of
release_request() in drivers/firewire/core-cdev.c. Against the
expectation, the function is never called due to the design of
release_client_resource(). The function delegates release task
to caller when called with non-NULL fourth argument. The implementation
of ioctl_send_response() is the case. It should release the object
explicitly.
This commit fixes the bug. |
| Multiple memory corruption issues were addressed with improved input validation. This issue is fixed in macOS Sonoma 14.2. Processing a maliciously crafted file may lead to unexpected app termination or arbitrary code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: Fix kmemleak in blk_mq_init_allocated_queue
There is a kmemleak caused by modprobe null_blk.ko
unreferenced object 0xffff8881acb1f000 (size 1024):
comm "modprobe", pid 836, jiffies 4294971190 (age 27.068s)
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
ff ff ff ff ff ff ff ff 00 53 99 9e ff ff ff ff .........S......
backtrace:
[<000000004a10c249>] kmalloc_node_trace+0x22/0x60
[<00000000648f7950>] blk_mq_alloc_and_init_hctx+0x289/0x350
[<00000000af06de0e>] blk_mq_realloc_hw_ctxs+0x2fe/0x3d0
[<00000000e00c1872>] blk_mq_init_allocated_queue+0x48c/0x1440
[<00000000d16b4e68>] __blk_mq_alloc_disk+0xc8/0x1c0
[<00000000d10c98c3>] 0xffffffffc450d69d
[<00000000b9299f48>] 0xffffffffc4538392
[<0000000061c39ed6>] do_one_initcall+0xd0/0x4f0
[<00000000b389383b>] do_init_module+0x1a4/0x680
[<0000000087cf3542>] load_module+0x6249/0x7110
[<00000000beba61b8>] __do_sys_finit_module+0x140/0x200
[<00000000fdcfff51>] do_syscall_64+0x35/0x80
[<000000003c0f1f71>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
That is because q->ma_ops is set to NULL before blk_release_queue is
called.
blk_mq_init_queue_data
blk_mq_init_allocated_queue
blk_mq_realloc_hw_ctxs
for (i = 0; i < set->nr_hw_queues; i++) {
old_hctx = xa_load(&q->hctx_table, i);
if (!blk_mq_alloc_and_init_hctx(.., i, ..)) [1]
if (!old_hctx)
break;
xa_for_each_start(&q->hctx_table, j, hctx, j)
blk_mq_exit_hctx(q, set, hctx, j); [2]
if (!q->nr_hw_queues) [3]
goto err_hctxs;
err_exit:
q->mq_ops = NULL; [4]
blk_put_queue
blk_release_queue
if (queue_is_mq(q)) [5]
blk_mq_release(q);
[1]: blk_mq_alloc_and_init_hctx failed at i != 0.
[2]: The hctxs allocated by [1] are moved to q->unused_hctx_list and
will be cleaned up in blk_mq_release.
[3]: q->nr_hw_queues is 0.
[4]: Set q->mq_ops to NULL.
[5]: queue_is_mq returns false due to [4]. And blk_mq_release
will not be called. The hctxs in q->unused_hctx_list are leaked.
To fix it, call blk_release_queue in exception path. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/realtek-rtl: Fix refcount leak in map_interrupts
of_find_node_by_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
This function doesn't call of_node_put() in error path.
Call of_node_put() directly after of_property_read_u32() to cover
both normal path and error path. |
| In the Linux kernel, the following vulnerability has been resolved:
ima: Fix potential memory leak in ima_init_crypto()
On failure to allocate the SHA1 tfm, IMA fails to initialize and exits
without freeing the ima_algo_array. Add the missing kfree() for
ima_algo_array to avoid the potential memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: provide block_invalidate_folio to fix memory leak
The ntfs3 filesystem lacks the 'invalidate_folio' method and it causes
memory leak. If you write to the filesystem and then unmount it, the
cached written data are not freed and they are permanently leaked. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix memory leak in parse_apply_sb_mount_options()
If processing the on-disk mount options fails after any memory was
allocated in the ext4_fs_context, e.g. s_qf_names, then this memory is
leaked. Fix this by calling ext4_fc_free() instead of kfree() directly.
Reproducer:
mkfs.ext4 -F /dev/vdc
tune2fs /dev/vdc -E mount_opts=usrjquota=file
echo clear > /sys/kernel/debug/kmemleak
mount /dev/vdc /vdc
echo scan > /sys/kernel/debug/kmemleak
sleep 5
echo scan > /sys/kernel/debug/kmemleak
cat /sys/kernel/debug/kmemleak |
| In the Linux kernel, the following vulnerability has been resolved:
mips: cdmm: Fix refcount leak in mips_cdmm_phys_base
The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount. |
| A vulnerability has been found in Jinher OA 1.0. This issue affects some unknown processing of the file GetTreeDate.aspx. The manipulation of the argument ID leads to sql injection. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. |
| A weakness has been identified in D-Link DIR-816L 206b01. Affected by this issue is the function soapcgi_main of the file /soap.cgi. This manipulation of the argument service causes os command injection. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited. This vulnerability only affects products that are no longer supported by the maintainer. |
