| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix mlx5_ib_get_hw_stats when used for device
Currently, when mlx5_ib_get_hw_stats() is used for device (port_num = 0),
there is a special handling in order to use the correct counters, but,
port_num is being passed down the stack without any change. Also, some
functions assume that port_num >=1. As a result, the following oops can
occur.
BUG: unable to handle page fault for address: ffff89510294f1a8
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP
CPU: 8 PID: 1382 Comm: devlink Tainted: G W 6.1.0-rc4_for_upstream_base_2022_11_10_16_12 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:_raw_spin_lock+0xc/0x20
Call Trace:
<TASK>
mlx5_ib_get_native_port_mdev+0x73/0xe0 [mlx5_ib]
do_get_hw_stats.constprop.0+0x109/0x160 [mlx5_ib]
mlx5_ib_get_hw_stats+0xad/0x180 [mlx5_ib]
ib_setup_device_attrs+0xf0/0x290 [ib_core]
ib_register_device+0x3bb/0x510 [ib_core]
? atomic_notifier_chain_register+0x67/0x80
__mlx5_ib_add+0x2b/0x80 [mlx5_ib]
mlx5r_probe+0xb8/0x150 [mlx5_ib]
? auxiliary_match_id+0x6a/0x90
auxiliary_bus_probe+0x3c/0x70
? driver_sysfs_add+0x6b/0x90
really_probe+0xcd/0x380
__driver_probe_device+0x80/0x170
driver_probe_device+0x1e/0x90
__device_attach_driver+0x7d/0x100
? driver_allows_async_probing+0x60/0x60
? driver_allows_async_probing+0x60/0x60
bus_for_each_drv+0x7b/0xc0
__device_attach+0xbc/0x200
bus_probe_device+0x87/0xa0
device_add+0x404/0x940
? dev_set_name+0x53/0x70
__auxiliary_device_add+0x43/0x60
add_adev+0x99/0xe0 [mlx5_core]
mlx5_attach_device+0xc8/0x120 [mlx5_core]
mlx5_load_one_devl_locked+0xb2/0xe0 [mlx5_core]
devlink_reload+0x133/0x250
devlink_nl_cmd_reload+0x480/0x570
? devlink_nl_pre_doit+0x44/0x2b0
genl_family_rcv_msg_doit.isra.0+0xc2/0x110
genl_rcv_msg+0x180/0x2b0
? devlink_nl_cmd_region_read_dumpit+0x540/0x540
? devlink_reload+0x250/0x250
? devlink_put+0x50/0x50
? genl_family_rcv_msg_doit.isra.0+0x110/0x110
netlink_rcv_skb+0x54/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x1f6/0x2c0
netlink_sendmsg+0x237/0x490
sock_sendmsg+0x33/0x40
__sys_sendto+0x103/0x160
? handle_mm_fault+0x10e/0x290
? do_user_addr_fault+0x1c0/0x5f0
__x64_sys_sendto+0x25/0x30
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Fix it by setting port_num to 1 in order to get device status and remove
unused variable. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: dp: Only trigger DRM HPD events if bridge is attached
The MediaTek DisplayPort interface bridge driver starts its interrupts
as soon as its probed. However when the interrupts trigger the bridge
might not have been attached to a DRM device. As drm_helper_hpd_irq_event()
does not check whether the passed in drm_device is valid or not, a NULL
pointer passed in results in a kernel NULL pointer dereference in it.
Check whether the bridge is attached and only trigger an HPD event if
it is. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: Reset connection when trying to use SMCRv2 fails.
We found a crash when using SMCRv2 with 2 Mellanox ConnectX-4. It
can be reproduced by:
- smc_run nginx
- smc_run wrk -t 32 -c 500 -d 30 http://<ip>:<port>
BUG: kernel NULL pointer dereference, address: 0000000000000014
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 8000000108713067 P4D 8000000108713067 PUD 151127067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 4 PID: 2441 Comm: kworker/4:249 Kdump: loaded Tainted: G W E 6.4.0-rc1+ #42
Workqueue: smc_hs_wq smc_listen_work [smc]
RIP: 0010:smc_clc_send_confirm_accept+0x284/0x580 [smc]
RSP: 0018:ffffb8294b2d7c78 EFLAGS: 00010a06
RAX: ffff8f1873238880 RBX: ffffb8294b2d7dc8 RCX: 0000000000000000
RDX: 00000000000000b4 RSI: 0000000000000001 RDI: 0000000000b40c00
RBP: ffffb8294b2d7db8 R08: ffff8f1815c5860c R09: 0000000000000000
R10: 0000000000000400 R11: 0000000000000000 R12: ffff8f1846f56180
R13: ffff8f1815c5860c R14: 0000000000000001 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8f1aefd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000014 CR3: 00000001027a0001 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? mlx5_ib_map_mr_sg+0xa1/0xd0 [mlx5_ib]
? smcr_buf_map_link+0x24b/0x290 [smc]
? __smc_buf_create+0x4ee/0x9b0 [smc]
smc_clc_send_accept+0x4c/0xb0 [smc]
smc_listen_work+0x346/0x650 [smc]
? __schedule+0x279/0x820
process_one_work+0x1e5/0x3f0
worker_thread+0x4d/0x2f0
? __pfx_worker_thread+0x10/0x10
kthread+0xe5/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
During the CLC handshake, server sequentially tries available SMCRv2
and SMCRv1 devices in smc_listen_work().
If an SMCRv2 device is found. SMCv2 based link group and link will be
assigned to the connection. Then assumed that some buffer assignment
errors happen later in the CLC handshake, such as RMB registration
failure, server will give up SMCRv2 and try SMCRv1 device instead. But
the resources assigned to the connection won't be reset.
When server tries SMCRv1 device, the connection creation process will
be executed again. Since conn->lnk has been assigned when trying SMCRv2,
it will not be set to the correct SMCRv1 link in
smcr_lgr_conn_assign_link(). So in such situation, conn->lgr points to
correct SMCRv1 link group but conn->lnk points to the SMCRv2 link
mistakenly.
Then in smc_clc_send_confirm_accept(), conn->rmb_desc->mr[link->link_idx]
will be accessed. Since the link->link_idx is not correct, the related
MR may not have been initialized, so crash happens.
| Try SMCRv2 device first
| |-> conn->lgr: assign existed SMCRv2 link group;
| |-> conn->link: assign existed SMCRv2 link (link_idx may be 1 in SMC_LGR_SYMMETRIC);
| |-> sndbuf & RMB creation fails, quit;
|
| Try SMCRv1 device then
| |-> conn->lgr: create SMCRv1 link group and assign;
| |-> conn->link: keep SMCRv2 link mistakenly;
| |-> sndbuf & RMB creation succeed, only RMB->mr[link_idx = 0]
| initialized.
|
| Then smc_clc_send_confirm_accept() accesses
| conn->rmb_desc->mr[conn->link->link_idx, which is 1], then crash.
v
This patch tries to fix this by cleaning conn->lnk before assigning
link. In addition, it is better to reset the connection and clean the
resources assigned if trying SMCRv2 failed in buffer creation or
registration. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: phy: phy-tahvo: fix memory leak in tahvo_usb_probe()
Smatch reports:
drivers/usb/phy/phy-tahvo.c: tahvo_usb_probe()
warn: missing unwind goto?
After geting irq, if ret < 0, it will return without error handling to
free memory.
Just add error handling to fix this problem. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix memory leak in mes self test
The fences associated with mes queue have to be freed
up during amdgpu_ring_fini. |
| In the Linux kernel, the following vulnerability has been resolved:
net/ieee802154: reject zero-sized raw_sendmsg()
syzbot is hitting skb_assert_len() warning at raw_sendmsg() for ieee802154
socket. What commit dc633700f00f726e ("net/af_packet: check len when
min_header_len equals to 0") does also applies to ieee802154 socket. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: fix memory leak in tcindex_set_parms
Syzkaller reports a memory leak as follows:
====================================
BUG: memory leak
unreferenced object 0xffff88810c287f00 (size 256):
comm "syz-executor105", pid 3600, jiffies 4294943292 (age 12.990s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff814cf9f0>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1046
[<ffffffff839c9e07>] kmalloc include/linux/slab.h:576 [inline]
[<ffffffff839c9e07>] kmalloc_array include/linux/slab.h:627 [inline]
[<ffffffff839c9e07>] kcalloc include/linux/slab.h:659 [inline]
[<ffffffff839c9e07>] tcf_exts_init include/net/pkt_cls.h:250 [inline]
[<ffffffff839c9e07>] tcindex_set_parms+0xa7/0xbe0 net/sched/cls_tcindex.c:342
[<ffffffff839caa1f>] tcindex_change+0xdf/0x120 net/sched/cls_tcindex.c:553
[<ffffffff8394db62>] tc_new_tfilter+0x4f2/0x1100 net/sched/cls_api.c:2147
[<ffffffff8389e91c>] rtnetlink_rcv_msg+0x4dc/0x5d0 net/core/rtnetlink.c:6082
[<ffffffff839eba67>] netlink_rcv_skb+0x87/0x1d0 net/netlink/af_netlink.c:2540
[<ffffffff839eab87>] netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
[<ffffffff839eab87>] netlink_unicast+0x397/0x4c0 net/netlink/af_netlink.c:1345
[<ffffffff839eb046>] netlink_sendmsg+0x396/0x710 net/netlink/af_netlink.c:1921
[<ffffffff8383e796>] sock_sendmsg_nosec net/socket.c:714 [inline]
[<ffffffff8383e796>] sock_sendmsg+0x56/0x80 net/socket.c:734
[<ffffffff8383eb08>] ____sys_sendmsg+0x178/0x410 net/socket.c:2482
[<ffffffff83843678>] ___sys_sendmsg+0xa8/0x110 net/socket.c:2536
[<ffffffff838439c5>] __sys_sendmmsg+0x105/0x330 net/socket.c:2622
[<ffffffff83843c14>] __do_sys_sendmmsg net/socket.c:2651 [inline]
[<ffffffff83843c14>] __se_sys_sendmmsg net/socket.c:2648 [inline]
[<ffffffff83843c14>] __x64_sys_sendmmsg+0x24/0x30 net/socket.c:2648
[<ffffffff84605fd5>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff84605fd5>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
[<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
====================================
Kernel uses tcindex_change() to change an existing
filter properties.
Yet the problem is that, during the process of changing,
if `old_r` is retrieved from `p->perfect`, then
kernel uses tcindex_alloc_perfect_hash() to newly
allocate filter results, uses tcindex_filter_result_init()
to clear the old filter result, without destroying
its tcf_exts structure, which triggers the above memory leak.
To be more specific, there are only two source for the `old_r`,
according to the tcindex_lookup(). `old_r` is retrieved from
`p->perfect`, or `old_r` is retrieved from `p->h`.
* If `old_r` is retrieved from `p->perfect`, kernel uses
tcindex_alloc_perfect_hash() to newly allocate the
filter results. Then `r` is assigned with `cp->perfect + handle`,
which is newly allocated. So condition `old_r && old_r != r` is
true in this situation, and kernel uses tcindex_filter_result_init()
to clear the old filter result, without destroying
its tcf_exts structure
* If `old_r` is retrieved from `p->h`, then `p->perfect` is NULL
according to the tcindex_lookup(). Considering that `cp->h`
is directly copied from `p->h` and `p->perfect` is NULL,
`r` is assigned with `tcindex_lookup(cp, handle)`, whose value
should be the same as `old_r`, so condition `old_r && old_r != r`
is false in this situation, kernel ignores using
tcindex_filter_result_init() to clear the old filter result.
So only when `old_r` is retrieved from `p->perfect` does kernel use
tcindex_filter_result_init() to clear the old filter result, which
triggers the above memory leak.
Considering that there already exists a tc_filter_wq workqueue
to destroy the old tcindex_d
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8183: fix refcount leak in mt8183_mt6358_ts3a227_max98357_dev_probe()
The node returned by of_parse_phandle() with refcount incremented,
of_node_put() needs be called when finish using it. So add it in the
error path in mt8183_mt6358_ts3a227_max98357_dev_probe(). |
| A vulnerability was identified in D-Link DIR-645 105B01. This issue affects the function soapcgi_main of the file /soap.cgi. Such manipulation of the argument service leads to command injection. The attack can be launched remotely. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| In Internet2 Grouper 5.17.1 before 5.20.5, group admins who are not Grouper sysadmins can configure loader jobs. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: isp1362: fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: sl811: fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: snic: Fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic at
once. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: gadget: lpc32xx_udc: fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: mhi: fix potential memory leak in ath11k_mhi_register()
mhi_alloc_controller() allocates a memory space for mhi_ctrl. When gets
some error, mhi_ctrl should be freed with mhi_free_controller(). But
when ath11k_mhi_read_addr_from_dt() fails, the function returns without
calling mhi_free_controller(), which will lead to a memory leak.
We can fix it by calling mhi_free_controller() when
ath11k_mhi_read_addr_from_dt() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
net: add vlan_get_protocol_and_depth() helper
Before blamed commit, pskb_may_pull() was used instead
of skb_header_pointer() in __vlan_get_protocol() and friends.
Few callers depended on skb->head being populated with MAC header,
syzbot caught one of them (skb_mac_gso_segment())
Add vlan_get_protocol_and_depth() to make the intent clearer
and use it where sensible.
This is a more generic fix than commit e9d3f80935b6
("net/af_packet: make sure to pull mac header") which was
dealing with a similar issue.
kernel BUG at include/linux/skbuff.h:2655 !
invalid opcode: 0000 [#1] SMP KASAN
CPU: 0 PID: 1441 Comm: syz-executor199 Not tainted 6.1.24-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023
RIP: 0010:__skb_pull include/linux/skbuff.h:2655 [inline]
RIP: 0010:skb_mac_gso_segment+0x68f/0x6a0 net/core/gro.c:136
Code: fd 48 8b 5c 24 10 44 89 6b 70 48 c7 c7 c0 ae 0d 86 44 89 e6 e8 a1 91 d0 00 48 c7 c7 00 af 0d 86 48 89 de 31 d2 e8 d1 4a e9 ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41
RSP: 0018:ffffc90001bd7520 EFLAGS: 00010286
RAX: ffffffff8469736a RBX: ffff88810f31dac0 RCX: ffff888115a18b00
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc90001bd75e8 R08: ffffffff84697183 R09: fffff5200037adf9
R10: 0000000000000000 R11: dffffc0000000001 R12: 0000000000000012
R13: 000000000000fee5 R14: 0000000000005865 R15: 000000000000fed7
FS: 000055555633f300(0000) GS:ffff8881f6a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000000 CR3: 0000000116fea000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
[<ffffffff847018dd>] __skb_gso_segment+0x32d/0x4c0 net/core/dev.c:3419
[<ffffffff8470398a>] skb_gso_segment include/linux/netdevice.h:4819 [inline]
[<ffffffff8470398a>] validate_xmit_skb+0x3aa/0xee0 net/core/dev.c:3725
[<ffffffff84707042>] __dev_queue_xmit+0x1332/0x3300 net/core/dev.c:4313
[<ffffffff851a9ec7>] dev_queue_xmit+0x17/0x20 include/linux/netdevice.h:3029
[<ffffffff851b4a82>] packet_snd net/packet/af_packet.c:3111 [inline]
[<ffffffff851b4a82>] packet_sendmsg+0x49d2/0x6470 net/packet/af_packet.c:3142
[<ffffffff84669a12>] sock_sendmsg_nosec net/socket.c:716 [inline]
[<ffffffff84669a12>] sock_sendmsg net/socket.c:736 [inline]
[<ffffffff84669a12>] __sys_sendto+0x472/0x5f0 net/socket.c:2139
[<ffffffff84669c75>] __do_sys_sendto net/socket.c:2151 [inline]
[<ffffffff84669c75>] __se_sys_sendto net/socket.c:2147 [inline]
[<ffffffff84669c75>] __x64_sys_sendto+0xe5/0x100 net/socket.c:2147
[<ffffffff8551d40f>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff8551d40f>] do_syscall_64+0x2f/0x50 arch/x86/entry/common.c:80
[<ffffffff85600087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| In the Linux kernel, the following vulnerability has been resolved:
media: uvcvideo: Handle cameras with invalid descriptors
If the source entity does not contain any pads, do not create a link. |
| In the Linux kernel, the following vulnerability has been resolved:
net: skb_partial_csum_set() fix against transport header magic value
skb->transport_header uses the special 0xFFFF value
to mark if the transport header was set or not.
We must prevent callers to accidentaly set skb->transport_header
to 0xFFFF. Note that only fuzzers can possibly do this today.
syzbot reported:
WARNING: CPU: 0 PID: 2340 at include/linux/skbuff.h:2847 skb_transport_offset include/linux/skbuff.h:2956 [inline]
WARNING: CPU: 0 PID: 2340 at include/linux/skbuff.h:2847 virtio_net_hdr_to_skb+0xbcc/0x10c0 include/linux/virtio_net.h:103
Modules linked in:
CPU: 0 PID: 2340 Comm: syz-executor.0 Not tainted 6.3.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023
RIP: 0010:skb_transport_header include/linux/skbuff.h:2847 [inline]
RIP: 0010:skb_transport_offset include/linux/skbuff.h:2956 [inline]
RIP: 0010:virtio_net_hdr_to_skb+0xbcc/0x10c0 include/linux/virtio_net.h:103
Code: 41 39 df 0f 82 c3 04 00 00 48 8b 7c 24 10 44 89 e6 e8 08 6e 59 ff 48 85 c0 74 54 e8 ce 36 7e fc e9 37 f8 ff ff e8 c4 36 7e fc <0f> 0b e9 93 f8 ff ff 44 89 f7 44 89 e6 e8 32 38 7e fc 45 39 e6 0f
RSP: 0018:ffffc90004497880 EFLAGS: 00010293
RAX: ffffffff84fea55c RBX: 000000000000ffff RCX: ffff888120be2100
RDX: 0000000000000000 RSI: 000000000000ffff RDI: 000000000000ffff
RBP: ffffc90004497990 R08: ffffffff84fe9de5 R09: 0000000000000034
R10: ffffea00048ebd80 R11: 0000000000000034 R12: ffff88811dc2d9c8
R13: dffffc0000000000 R14: ffff88811dc2d9ae R15: 1ffff11023b85b35
FS: 00007f9211a59700(0000) GS:ffff8881f6c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200002c0 CR3: 00000001215a5000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
packet_snd net/packet/af_packet.c:3076 [inline]
packet_sendmsg+0x4590/0x61a0 net/packet/af_packet.c:3115
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
__sys_sendto+0x472/0x630 net/socket.c:2144
__do_sys_sendto net/socket.c:2156 [inline]
__se_sys_sendto net/socket.c:2152 [inline]
__x64_sys_sendto+0xe5/0x100 net/socket.c:2152
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2f/0x50 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f9210c8c169
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f9211a59168 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007f9210dabf80 RCX: 00007f9210c8c169
RDX: 000000000000ffed RSI: 00000000200000c0 RDI: 0000000000000003
RBP: 00007f9210ce7ca1 R08: 0000000020000540 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffe135d65cf R14: 00007f9211a59300 R15: 0000000000022000 |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: arizona: Use pm_runtime_resume_and_get() to prevent refcnt leak
In arizona_clk32k_enable(), we should use pm_runtime_resume_and_get()
as pm_runtime_get_sync() will increase the refcnt even when it
returns an error. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: snic: Fix possible memory leak if device_add() fails
If device_add() returns error, the name allocated by dev_set_name() needs
be freed. As the comment of device_add() says, put_device() should be used
to give up the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanp(). |
