| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue. Notes: Additional analysis indicates that the files referenced in the stack trace do not exist in Bison. |
| ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue. Notes: Based on the analysis by MITRE and review of community feedback, the reported conditions represent expected and intentional behavior within dnsmasq's documented design, rather than security vulnerabilities. |
| Memory safety bugs present in Firefox 133, Thunderbird 133, Firefox ESR 128.5, and Thunderbird 128.5. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 134, Firefox ESR < 128.6, Thunderbird < 134, and Thunderbird < 128.6. |
| Memory safety bugs present in Firefox 133, Thunderbird 133, Firefox ESR 115.18, Firefox ESR 128.5, Thunderbird 115.18, and Thunderbird 128.5. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 134, Firefox ESR < 128.6, Firefox ESR < 115.19, Thunderbird < 134, and Thunderbird < 128.6. |
| When segmenting specially crafted text, segmentation would corrupt memory leading to a potentially exploitable crash. This vulnerability affects Firefox < 134, Firefox ESR < 128.6, Thunderbird < 134, and Thunderbird < 128.6. |
| Memory safety bugs present in Firefox 130, Firefox ESR 115.15, Firefox ESR 128.2, and Thunderbird 128.2. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 131, Firefox ESR < 128.3, Firefox ESR < 115.16, Thunderbird < 128.3, and Thunderbird < 131. |
| Issue summary: Use of the low-level GF(2^m) elliptic curve APIs with untrusted
explicit values for the field polynomial can lead to out-of-bounds memory reads
or writes.
Impact summary: Out of bound memory writes can lead to an application crash or
even a possibility of a remote code execution, however, in all the protocols
involving Elliptic Curve Cryptography that we're aware of, either only "named
curves" are supported, or, if explicit curve parameters are supported, they
specify an X9.62 encoding of binary (GF(2^m)) curves that can't represent
problematic input values. Thus the likelihood of existence of a vulnerable
application is low.
In particular, the X9.62 encoding is used for ECC keys in X.509 certificates,
so problematic inputs cannot occur in the context of processing X.509
certificates. Any problematic use-cases would have to be using an "exotic"
curve encoding.
The affected APIs include: EC_GROUP_new_curve_GF2m(), EC_GROUP_new_from_params(),
and various supporting BN_GF2m_*() functions.
Applications working with "exotic" explicit binary (GF(2^m)) curve parameters,
that make it possible to represent invalid field polynomials with a zero
constant term, via the above or similar APIs, may terminate abruptly as a
result of reading or writing outside of array bounds. Remote code execution
cannot easily be ruled out.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. |
| In PHP versions 8.1.* before 8.1.30, 8.2.* before 8.2.24, 8.3.* before 8.3.12, when using PHP-FPM SAPI and it is configured to catch workers output through catch_workers_output = yes, it may be possible to pollute the final log or remove up to 4 characters from the log messages by manipulating log message content. Additionally, if PHP-FPM is configured to use syslog output, it may be possible to further remove log data using the same vulnerability. |
| In PHP versions 8.1.* before 8.1.31, 8.2.* before 8.2.26, 8.3.* before 8.3.14, a hostile MySQL server can cause the client to disclose the content of its heap containing data from other SQL requests and possible other data belonging to different users of the same server. |
| In PHP versions 8.1.* before 8.1.30, 8.2.* before 8.2.24, 8.3.* before 8.3.12, HTTP_REDIRECT_STATUS variable is used to check whether or not CGI binary is being run by the HTTP server. However, in certain scenarios, the content of this variable can be controlled by the request submitter via HTTP headers, which can lead to cgi.force_redirect option not being correctly applied. In certain configurations this may lead to arbitrary file inclusion in PHP. |
| In PHP versions 8.1.* before 8.1.30, 8.2.* before 8.2.24, 8.3.* before 8.3.12, erroneous parsing of multipart form data contained in an HTTP POST request could lead to legitimate data not being processed. This could lead to malicious attacker able to control part of the submitted data being able to exclude portion of other data, potentially leading to erroneous application behavior. |
| There is a LOW severity vulnerability affecting CPython, specifically the
'http.cookies' standard library module.
When parsing cookies that contained backslashes for quoted characters in
the cookie value, the parser would use an algorithm with quadratic
complexity, resulting in excess CPU resources being used while parsing the
value. |
| libcurl's ASN1 parser code has the `GTime2str()` function, used for parsing an
ASN.1 Generalized Time field. If given an syntactically incorrect field, the
parser might end up using -1 for the length of the *time fraction*, leading to
a `strlen()` getting performed on a pointer to a heap buffer area that is not
(purposely) null terminated.
This flaw most likely leads to a crash, but can also lead to heap contents
getting returned to the application when
[CURLINFO_CERTINFO](https://curl.se/libcurl/c/CURLINFO_CERTINFO.html) is used. |
| A vulnerability was found in FFmpeg up to 7.0.1. It has been classified as critical. This affects the function pnm_decode_frame in the library /libavcodec/pnmdec.c. The manipulation leads to heap-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 7.0.2 is able to address this issue. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-273651. |
| A mismatch between allocator and deallocator could have led to memory corruption. This vulnerability affects Firefox < 128, Firefox ESR < 115.13, Thunderbird < 115.13, and Thunderbird < 128. |
| There is a MEDIUM severity vulnerability affecting CPython.
Regular expressions that allowed excessive backtracking during tarfile.TarFile header parsing are vulnerable to ReDoS via specifically-crafted tar archives. |
| Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an
empty supported client protocols buffer may cause a crash or memory contents to
be sent to the peer.
Impact summary: A buffer overread can have a range of potential consequences
such as unexpected application beahviour or a crash. In particular this issue
could result in up to 255 bytes of arbitrary private data from memory being sent
to the peer leading to a loss of confidentiality. However, only applications
that directly call the SSL_select_next_proto function with a 0 length list of
supported client protocols are affected by this issue. This would normally never
be a valid scenario and is typically not under attacker control but may occur by
accident in the case of a configuration or programming error in the calling
application.
The OpenSSL API function SSL_select_next_proto is typically used by TLS
applications that support ALPN (Application Layer Protocol Negotiation) or NPN
(Next Protocol Negotiation). NPN is older, was never standardised and
is deprecated in favour of ALPN. We believe that ALPN is significantly more
widely deployed than NPN. The SSL_select_next_proto function accepts a list of
protocols from the server and a list of protocols from the client and returns
the first protocol that appears in the server list that also appears in the
client list. In the case of no overlap between the two lists it returns the
first item in the client list. In either case it will signal whether an overlap
between the two lists was found. In the case where SSL_select_next_proto is
called with a zero length client list it fails to notice this condition and
returns the memory immediately following the client list pointer (and reports
that there was no overlap in the lists).
This function is typically called from a server side application callback for
ALPN or a client side application callback for NPN. In the case of ALPN the list
of protocols supplied by the client is guaranteed by libssl to never be zero in
length. The list of server protocols comes from the application and should never
normally be expected to be of zero length. In this case if the
SSL_select_next_proto function has been called as expected (with the list
supplied by the client passed in the client/client_len parameters), then the
application will not be vulnerable to this issue. If the application has
accidentally been configured with a zero length server list, and has
accidentally passed that zero length server list in the client/client_len
parameters, and has additionally failed to correctly handle a "no overlap"
response (which would normally result in a handshake failure in ALPN) then it
will be vulnerable to this problem.
In the case of NPN, the protocol permits the client to opportunistically select
a protocol when there is no overlap. OpenSSL returns the first client protocol
in the no overlap case in support of this. The list of client protocols comes
from the application and should never normally be expected to be of zero length.
However if the SSL_select_next_proto function is accidentally called with a
client_len of 0 then an invalid memory pointer will be returned instead. If the
application uses this output as the opportunistic protocol then the loss of
confidentiality will occur.
This issue has been assessed as Low severity because applications are most
likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not
widely used. It also requires an application configuration or programming error.
Finally, this issue would not typically be under attacker control making active
exploitation unlikely.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.
Due to the low severity of this issue we are not issuing new releases of
OpenSSL at this time. The fix will be included in the next releases when they
become available. |
| An out-of-bounds access issue was addressed with improved bounds checking. This issue is fixed in macOS Sequoia 15.2. An attacker may be able to cause unexpected system termination or arbitrary code execution in DCP firmware. |
| The issue was addressed with improved checks. This issue is fixed in watchOS 11.2, visionOS 2.2, tvOS 18.2, macOS Sequoia 15.2, Safari 18.2, iOS 18.2 and iPadOS 18.2. Processing maliciously crafted web content may lead to an unexpected process crash. |
| editorconfig-core-c is theEditorConfig core library written in C (for use by plugins supporting EditorConfig parsing). In affected versions several overflows may occur in switch case '[' when the input pattern contains many escaped characters. The added backslashes leave too little space in the output pattern when processing nested brackets such that the remaining input length exceeds the output capacity. This issue has been addressed in release version 0.12.7. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
