Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
7699 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-38597 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: eth: sungem: remove .ndo_poll_controller to avoid deadlocks Erhard reports netpoll warnings from sungem: netpoll_send_skb_on_dev(): eth0 enabled interrupts in poll (gem_start_xmit+0x0/0x398) WARNING: CPU: 1 PID: 1 at net/core/netpoll.c:370 netpoll_send_skb+0x1fc/0x20c gem_poll_controller() disables interrupts, which may sleep. We can't sleep in netpoll, it has interrupts disabled completely. Strangely, gem_poll_controller() doesn't even poll the completions, and instead acts as if an interrupt has fired so it just schedules NAPI and exits. None of this has been necessary for years, since netpoll invokes NAPI directly. | ||||
| CVE-2024-38591 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix deadlock on SRQ async events. xa_lock for SRQ table may be required in AEQ. Use xa_store_irq()/ xa_erase_irq() to avoid deadlock. | ||||
| CVE-2024-38590 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Modify the print level of CQE error Too much print may lead to a panic in kernel. Change ibdev_err() to ibdev_err_ratelimited(), and change the printing level of cqe dump to debug level. | ||||
| CVE-2024-38584 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe() In the prueth_probe() function, if one of the calls to emac_phy_connect() fails due to of_phy_connect() returning NULL, then the subsequent call to phy_attached_info() will dereference a NULL pointer. Check the return code of emac_phy_connect and fail cleanly if there is an error. | ||||
| CVE-2024-38583 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix use-after-free of timer for log writer thread Patch series "nilfs2: fix log writer related issues". This bug fix series covers three nilfs2 log writer-related issues, including a timer use-after-free issue and potential deadlock issue on unmount, and a potential freeze issue in event synchronization found during their analysis. Details are described in each commit log. This patch (of 3): A use-after-free issue has been reported regarding the timer sc_timer on the nilfs_sc_info structure. The problem is that even though it is used to wake up a sleeping log writer thread, sc_timer is not shut down until the nilfs_sc_info structure is about to be freed, and is used regardless of the thread's lifetime. Fix this issue by limiting the use of sc_timer only while the log writer thread is alive. | ||||
| CVE-2024-38581 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2024-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/mes: fix use-after-free issue Delete fence fallback timer to fix the ramdom use-after-free issue. v2: move to amdgpu_mes.c | ||||
| CVE-2024-38577 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rcu-tasks: Fix show_rcu_tasks_trace_gp_kthread buffer overflow There is a possibility of buffer overflow in show_rcu_tasks_trace_gp_kthread() if counters, passed to sprintf() are huge. Counter numbers, needed for this are unrealistically high, but buffer overflow is still possible. Use snprintf() with buffer size instead of sprintf(). Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2024-38573 | 2 Linux, Redhat | 4 Acrn, Linux Kernel, Enterprise Linux and 1 more | 2024-11-05 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: cppc_cpufreq: Fix possible null pointer dereference cppc_cpufreq_get_rate() and hisi_cppc_cpufreq_get_rate() can be called from different places with various parameters. So cpufreq_cpu_get() can return null as 'policy' in some circumstances. Fix this bug by adding null return check. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2024-38571 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/tsens: Fix null pointer dereference compute_intercept_slope() is called from calibrate_8960() (in tsens-8960.c) as compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB) which lead to null pointer dereference (if DEBUG or DYNAMIC_DEBUG set). Fix this bug by adding null pointer check. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2024-38570 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2024-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix potential glock use-after-free on unmount When a DLM lockspace is released and there ares still locks in that lockspace, DLM will unlock those locks automatically. Commit fb6791d100d1b started exploiting this behavior to speed up filesystem unmount: gfs2 would simply free glocks it didn't want to unlock and then release the lockspace. This didn't take the bast callbacks for asynchronous lock contention notifications into account, which remain active until until a lock is unlocked or its lockspace is released. To prevent those callbacks from accessing deallocated objects, put the glocks that should not be unlocked on the sd_dead_glocks list, release the lockspace, and only then free those glocks. As an additional measure, ignore unexpected ast and bast callbacks if the receiving glock is dead. | ||||
| CVE-2024-38569 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drivers/perf: hisi_pcie: Fix out-of-bound access when valid event group The perf tool allows users to create event groups through following cmd [1], but the driver does not check whether the array index is out of bounds when writing data to the event_group array. If the number of events in an event_group is greater than HISI_PCIE_MAX_COUNTERS, the memory write overflow of event_group array occurs. Add array index check to fix the possible array out of bounds violation, and return directly when write new events are written to array bounds. There are 9 different events in an event_group. [1] perf stat -e '{pmu/event1/, ... ,pmu/event9/}' | ||||
| CVE-2024-38568 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drivers/perf: hisi: hns3: Fix out-of-bound access when valid event group The perf tool allows users to create event groups through following cmd [1], but the driver does not check whether the array index is out of bounds when writing data to the event_group array. If the number of events in an event_group is greater than HNS3_PMU_MAX_HW_EVENTS, the memory write overflow of event_group array occurs. Add array index check to fix the possible array out of bounds violation, and return directly when write new events are written to array bounds. There are 9 different events in an event_group. [1] perf stat -e '{pmu/event1/, ... ,pmu/event9/} | ||||
| CVE-2024-38563 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix potential memory leakage when reading chip temperature Without this commit, reading chip temperature will cause memory leakage. | ||||
| CVE-2024-38562 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2024-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: Avoid address calculations via out of bounds array indexing Before request->channels[] can be used, request->n_channels must be set. Additionally, address calculations for memory after the "channels" array need to be calculated from the allocation base ("request") rather than via the first "out of bounds" index of "channels", otherwise run-time bounds checking will throw a warning. | ||||
| CVE-2024-38561 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: kunit: Fix kthread reference There is a race condition when a kthread finishes after the deadline and before the call to kthread_stop(), which may lead to use after free. | ||||
| CVE-2024-38557 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Reload only IB representors upon lag disable/enable On lag disable, the bond IB device along with all of its representors are destroyed, and then the slaves' representors get reloaded. In case the slave IB representor load fails, the eswitch error flow unloads all representors, including ethernet representors, where the netdevs get detached and removed from lag bond. Such flow is inaccurate as the lag driver is not responsible for loading/unloading ethernet representors. Furthermore, the flow described above begins by holding lag lock to prevent bond changes during disable flow. However, when reaching the ethernet representors detachment from lag, the lag lock is required again, triggering the following deadlock: Call trace: __switch_to+0xf4/0x148 __schedule+0x2c8/0x7d0 schedule+0x50/0xe0 schedule_preempt_disabled+0x18/0x28 __mutex_lock.isra.13+0x2b8/0x570 __mutex_lock_slowpath+0x1c/0x28 mutex_lock+0x4c/0x68 mlx5_lag_remove_netdev+0x3c/0x1a0 [mlx5_core] mlx5e_uplink_rep_disable+0x70/0xa0 [mlx5_core] mlx5e_detach_netdev+0x6c/0xb0 [mlx5_core] mlx5e_netdev_change_profile+0x44/0x138 [mlx5_core] mlx5e_netdev_attach_nic_profile+0x28/0x38 [mlx5_core] mlx5e_vport_rep_unload+0x184/0x1b8 [mlx5_core] mlx5_esw_offloads_rep_load+0xd8/0xe0 [mlx5_core] mlx5_eswitch_reload_reps+0x74/0xd0 [mlx5_core] mlx5_disable_lag+0x130/0x138 [mlx5_core] mlx5_lag_disable_change+0x6c/0x70 [mlx5_core] // hold ldev->lock mlx5_devlink_eswitch_mode_set+0xc0/0x410 [mlx5_core] devlink_nl_cmd_eswitch_set_doit+0xdc/0x180 genl_family_rcv_msg_doit.isra.17+0xe8/0x138 genl_rcv_msg+0xe4/0x220 netlink_rcv_skb+0x44/0x108 genl_rcv+0x40/0x58 netlink_unicast+0x198/0x268 netlink_sendmsg+0x1d4/0x418 sock_sendmsg+0x54/0x60 __sys_sendto+0xf4/0x120 __arm64_sys_sendto+0x30/0x40 el0_svc_common+0x8c/0x120 do_el0_svc+0x30/0xa0 el0_svc+0x20/0x30 el0_sync_handler+0x90/0xb8 el0_sync+0x160/0x180 Thus, upon lag enable/disable, load and unload only the IB representors of the slaves preventing the deadlock mentioned above. While at it, refactor the mlx5_esw_offloads_rep_load() function to have a static helper method for its internal logic, in symmetry with the representor unload design. | ||||
| CVE-2024-38555 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2024-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Discard command completions in internal error Fix use after free when FW completion arrives while device is in internal error state. Avoid calling completion handler in this case, since the device will flush the command interface and trigger all completions manually. Kernel log: ------------[ cut here ]------------ refcount_t: underflow; use-after-free. ... RIP: 0010:refcount_warn_saturate+0xd8/0xe0 ... Call Trace: <IRQ> ? __warn+0x79/0x120 ? refcount_warn_saturate+0xd8/0xe0 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? refcount_warn_saturate+0xd8/0xe0 cmd_ent_put+0x13b/0x160 [mlx5_core] mlx5_cmd_comp_handler+0x5f9/0x670 [mlx5_core] cmd_comp_notifier+0x1f/0x30 [mlx5_core] notifier_call_chain+0x35/0xb0 atomic_notifier_call_chain+0x16/0x20 mlx5_eq_async_int+0xf6/0x290 [mlx5_core] notifier_call_chain+0x35/0xb0 atomic_notifier_call_chain+0x16/0x20 irq_int_handler+0x19/0x30 [mlx5_core] __handle_irq_event_percpu+0x4b/0x160 handle_irq_event+0x2e/0x80 handle_edge_irq+0x98/0x230 __common_interrupt+0x3b/0xa0 common_interrupt+0x7b/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 | ||||
| CVE-2024-38554 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ax25: Fix reference count leak issue of net_device There is a reference count leak issue of the object "net_device" in ax25_dev_device_down(). When the ax25 device is shutting down, the ax25_dev_device_down() drops the reference count of net_device one or zero times depending on if we goto unlock_put or not, which will cause memory leak. In order to solve the above issue, decrease the reference count of net_device after dev->ax25_ptr is set to null. | ||||
| CVE-2024-38553 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: fec: remove .ndo_poll_controller to avoid deadlocks There is a deadlock issue found in sungem driver, please refer to the commit ac0a230f719b ("eth: sungem: remove .ndo_poll_controller to avoid deadlocks"). The root cause of the issue is that netpoll is in atomic context and disable_irq() is called by .ndo_poll_controller interface of sungem driver, however, disable_irq() might sleep. After analyzing the implementation of fec_poll_controller(), the fec driver should have the same issue. Due to the fec driver uses NAPI for TX completions, the .ndo_poll_controller is unnecessary to be implemented in the fec driver, so fec_poll_controller() can be safely removed. | ||||
| CVE-2024-38552 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential index out of bounds in color transformation function Fixes index out of bounds issue in the color transformation function. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, an error message is logged and the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:405 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:406 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:407 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max | ||||