| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: mesh: Fix leak of mesh_preq_queue objects
The hwmp code use objects of type mesh_preq_queue, added to a list in
ieee80211_if_mesh, to keep track of mpath we need to resolve. If the mpath
gets deleted, ex mesh interface is removed, the entries in that list will
never get cleaned. Fix this by flushing all corresponding items of the
preq_queue in mesh_path_flush_pending().
This should take care of KASAN reports like this:
unreferenced object 0xffff00000668d800 (size 128):
comm "kworker/u8:4", pid 67, jiffies 4295419552 (age 1836.444s)
hex dump (first 32 bytes):
00 1f 05 09 00 00 ff ff 00 d5 68 06 00 00 ff ff ..........h.....
8e 97 ea eb 3e b8 01 00 00 00 00 00 00 00 00 00 ....>...........
backtrace:
[<000000007302a0b6>] __kmem_cache_alloc_node+0x1e0/0x35c
[<00000000049bd418>] kmalloc_trace+0x34/0x80
[<0000000000d792bb>] mesh_queue_preq+0x44/0x2a8
[<00000000c99c3696>] mesh_nexthop_resolve+0x198/0x19c
[<00000000926bf598>] ieee80211_xmit+0x1d0/0x1f4
[<00000000fc8c2284>] __ieee80211_subif_start_xmit+0x30c/0x764
[<000000005926ee38>] ieee80211_subif_start_xmit+0x9c/0x7a4
[<000000004c86e916>] dev_hard_start_xmit+0x174/0x440
[<0000000023495647>] __dev_queue_xmit+0xe24/0x111c
[<00000000cfe9ca78>] batadv_send_skb_packet+0x180/0x1e4
[<000000007bacc5d5>] batadv_v_elp_periodic_work+0x2f4/0x508
[<00000000adc3cd94>] process_one_work+0x4b8/0xa1c
[<00000000b36425d1>] worker_thread+0x9c/0x634
[<0000000005852dd5>] kthread+0x1bc/0x1c4
[<000000005fccd770>] ret_from_fork+0x10/0x20
unreferenced object 0xffff000009051f00 (size 128):
comm "kworker/u8:4", pid 67, jiffies 4295419553 (age 1836.440s)
hex dump (first 32 bytes):
90 d6 92 0d 00 00 ff ff 00 d8 68 06 00 00 ff ff ..........h.....
36 27 92 e4 02 e0 01 00 00 58 79 06 00 00 ff ff 6'.......Xy.....
backtrace:
[<000000007302a0b6>] __kmem_cache_alloc_node+0x1e0/0x35c
[<00000000049bd418>] kmalloc_trace+0x34/0x80
[<0000000000d792bb>] mesh_queue_preq+0x44/0x2a8
[<00000000c99c3696>] mesh_nexthop_resolve+0x198/0x19c
[<00000000926bf598>] ieee80211_xmit+0x1d0/0x1f4
[<00000000fc8c2284>] __ieee80211_subif_start_xmit+0x30c/0x764
[<000000005926ee38>] ieee80211_subif_start_xmit+0x9c/0x7a4
[<000000004c86e916>] dev_hard_start_xmit+0x174/0x440
[<0000000023495647>] __dev_queue_xmit+0xe24/0x111c
[<00000000cfe9ca78>] batadv_send_skb_packet+0x180/0x1e4
[<000000007bacc5d5>] batadv_v_elp_periodic_work+0x2f4/0x508
[<00000000adc3cd94>] process_one_work+0x4b8/0xa1c
[<00000000b36425d1>] worker_thread+0x9c/0x634
[<0000000005852dd5>] kthread+0x1bc/0x1c4
[<000000005fccd770>] ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix tainted pointer delete is case of flow rules creation fail
In case of flow rule creation fail in mlx5_lag_create_port_sel_table(),
instead of previously created rules, the tainted pointer is deleted
deveral times.
Fix this bug by using correct flow rules pointers.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| A vulnerability classified as problematic has been found in IDnow App up to 9.6.0 on Android. This affects an unknown part of the file AndroidManifest.xml of the component de.idnow. The manipulation leads to improper export of android application components. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix kernel crash during resume
Currently during resume, QMI target memory is not properly handled, resulting
in kernel crash in case DMA remap is not supported:
BUG: Bad page state in process kworker/u16:54 pfn:36e80
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80
page dumped because: nonzero _refcount
Call Trace:
bad_page
free_page_is_bad_report
__free_pages_ok
__free_pages
dma_direct_free
dma_free_attrs
ath12k_qmi_free_target_mem_chunk
ath12k_qmi_msg_mem_request_cb
The reason is:
Once ath12k module is loaded, firmware sends memory request to host. In case
DMA remap not supported, ath12k refuses the first request due to failure in
allocating with large segment size:
ath12k_pci 0000:04:00.0: qmi firmware request memory request
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144
ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size
ath12k_pci 0000:04:00.0: qmi delays mem_request 2
ath12k_pci 0000:04:00.0: qmi firmware request memory request
Later firmware comes back with more but small segments and allocation
succeeds:
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
Now ath12k is working. If suspend is triggered, firmware will be reloaded
during resume. As same as before, firmware requests two large segments at
first. In ath12k_qmi_msg_mem_request_cb() segment count and size are
assigned:
ab->qmi.mem_seg_count == 2
ab->qmi.target_mem[0].size == 7077888
ab->qmi.target_mem[1].size == 8454144
Then allocation failed like before and ath12k_qmi_free_target_mem_chunk()
is called to free all allocated segments. Note the first segment is skipped
because its v.addr is cleared due to allocation failure:
chunk->v.addr = dma_alloc_coherent()
Also note that this leaks that segment because it has not been freed.
While freeing the second segment, a size of 8454144 is passed to
dma_free_coherent(). However remember that this segment is allocated at
the first time firmware is loaded, before suspend. So its real size is
524288, much smaller than 8454144. As a result kernel found we are freeing
some memory which is in use and thus cras
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: Fix suspicious rcu_dereference_protected()
When destroying all sets, we are either in pernet exit phase or
are executing a "destroy all sets command" from userspace. The latter
was taken into account in ip_set_dereference() (nfnetlink mutex is held),
but the former was not. The patch adds the required check to
rcu_dereference_protected() in ip_set_dereference(). |
| A vulnerability classified as problematic was found in Foresight News App up to 2.6.4 on Android. This vulnerability affects unknown code of the file AndroidManifest.xml of the component pro.foresightnews.appa. The manipulation leads to improper export of android application components. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qedi: Fix crash while reading debugfs attribute
The qedi_dbg_do_not_recover_cmd_read() function invokes sprintf() directly
on a __user pointer, which results into the crash.
To fix this issue, use a small local stack buffer for sprintf() and then
call simple_read_from_buffer(), which in turns make the copy_to_user()
call.
BUG: unable to handle page fault for address: 00007f4801111000
PGD 8000000864df6067 P4D 8000000864df6067 PUD 864df7067 PMD 846028067 PTE 0
Oops: 0002 [#1] PREEMPT SMP PTI
Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/15/2023
RIP: 0010:memcpy_orig+0xcd/0x130
RSP: 0018:ffffb7a18c3ffc40 EFLAGS: 00010202
RAX: 00007f4801111000 RBX: 00007f4801111000 RCX: 000000000000000f
RDX: 000000000000000f RSI: ffffffffc0bfd7a0 RDI: 00007f4801111000
RBP: ffffffffc0bfd7a0 R08: 725f746f6e5f6f64 R09: 3d7265766f636572
R10: ffffb7a18c3ffd08 R11: 0000000000000000 R12: 00007f4881110fff
R13: 000000007fffffff R14: ffffb7a18c3ffca0 R15: ffffffffc0bfd7af
FS: 00007f480118a740(0000) GS:ffff98e38af00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4801111000 CR3: 0000000864b8e001 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __die_body+0x1a/0x60
? page_fault_oops+0x183/0x510
? exc_page_fault+0x69/0x150
? asm_exc_page_fault+0x22/0x30
? memcpy_orig+0xcd/0x130
vsnprintf+0x102/0x4c0
sprintf+0x51/0x80
qedi_dbg_do_not_recover_cmd_read+0x2f/0x50 [qedi 6bcfdeeecdea037da47069eca2ba717c84a77324]
full_proxy_read+0x50/0x80
vfs_read+0xa5/0x2e0
? folio_add_new_anon_rmap+0x44/0xa0
? set_pte_at+0x15/0x30
? do_pte_missing+0x426/0x7f0
ksys_read+0xa5/0xe0
do_syscall_64+0x58/0x80
? __count_memcg_events+0x46/0x90
? count_memcg_event_mm+0x3d/0x60
? handle_mm_fault+0x196/0x2f0
? do_user_addr_fault+0x267/0x890
? exc_page_fault+0x69/0x150
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f4800f20b4d |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/pseries: Enforce hcall result buffer validity and size
plpar_hcall(), plpar_hcall9(), and related functions expect callers to
provide valid result buffers of certain minimum size. Currently this
is communicated only through comments in the code and the compiler has
no idea.
For example, if I write a bug like this:
long retbuf[PLPAR_HCALL_BUFSIZE]; // should be PLPAR_HCALL9_BUFSIZE
plpar_hcall9(H_ALLOCATE_VAS_WINDOW, retbuf, ...);
This compiles with no diagnostics emitted, but likely results in stack
corruption at runtime when plpar_hcall9() stores results past the end
of the array. (To be clear this is a contrived example and I have not
found a real instance yet.)
To make this class of error less likely, we can use explicitly-sized
array parameters instead of pointers in the declarations for the hcall
APIs. When compiled with -Warray-bounds[1], the code above now
provokes a diagnostic like this:
error: array argument is too small;
is of size 32, callee requires at least 72 [-Werror,-Warray-bounds]
60 | plpar_hcall9(H_ALLOCATE_VAS_WINDOW, retbuf,
| ^ ~~~~~~
[1] Enabled for LLVM builds but not GCC for now. See commit
0da6e5fd6c37 ("gcc: disable '-Warray-bounds' for gcc-13 too") and
related changes. |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: Octeon: Add PCIe link status check
The standard PCIe configuration read-write interface is used to
access the configuration space of the peripheral PCIe devices
of the mips processor after the PCIe link surprise down, it can
generate kernel panic caused by "Data bus error". So it is
necessary to add PCIe link status check for system protection.
When the PCIe link is down or in training, assigning a value
of 0 to the configuration address can prevent read-write behavior
to the configuration space of peripheral PCIe devices, thereby
preventing kernel panic. |
| A vulnerability, which was classified as critical, has been found in Onyx up to 0.29.1. This issue affects the function generate_simple_sql of the file backend/onyx/agents/agent_search/kb_search/nodes/a3_generate_simple_sql.py of the component Chat Interface. The manipulation leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability, which was classified as problematic, was found in KoaJS Koa up to 3.0.0. Affected is the function back in the library lib/response.js of the component HTTP Header Handler. The manipulation of the argument Referrer leads to open redirect. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability classified as critical has been found in Jingmen Zeyou Large File Upload Control up to 6.3. Affected is an unknown function of the file /index.jsp. The manipulation of the argument ID leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability classified as critical has been found in Engeman Web up to 12.0.0.1. Affected is an unknown function of the file /Login/RecoveryPass of the component Password Recovery Page. The manipulation of the argument LanguageCombobox as part of Cookie leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Linkr is a lightweight file delivery system that downloads files from a webserver. Linkr versions through 2.0.0 do not verify the integrity or authenticity of .linkr manifest files before using their contents, allowing a tampered manifest to inject arbitrary file entries into a package distribution. An attacker can modify a generated .linkr manifest (for example by adding a new entry with a malicious URL) and when a user runs the extract command the client downloads the attacker-supplied file without verification. This enables arbitrary file injection and creates a potential path to remote code execution if a downloaded malicious binary or script is later executed. Version 2.0.1 adds a manifest integrity check that compares the checksum of the original author-created manifest to the one being extracted and aborts on mismatch, warning if no original manifest is hosted. Users should update to 2.0.1 or later. As a workaround prior to updating, use only trusted .linkr manifests, manually verify manifest integrity, and host manifests on trusted servers. |
| Element Web is a Matrix web client built using the Matrix React SDK. Element Web and Element Desktop before version 1.11.112 have insufficient validation of room predecessor links, allowing a remote attacker to attempt to impermanently replace a room's entry in the room list with an unrelated attacker-supplied room. While the effect of this is temporary, it may still confuse users into acting on incorrect assumptions. The issue has been patched and users should upgrade to 1.11.112. A reload/refresh will fix the incorrect room list state, removing the attacker's room and restoring the original room. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix lockdep assertion on sync reset unload event
Fix lockdep assertion triggered during sync reset unload event. When the
sync reset flow is initiated using the devlink reload fw_activate
option, the PF already holds the devlink lock while handling unload
event. In this case, delegate sync reset unload event handling back to
the devlink callback process to avoid double-locking and resolve the
lockdep warning.
Kernel log:
WARNING: CPU: 9 PID: 1578 at devl_assert_locked+0x31/0x40
[...]
Call Trace:
<TASK>
mlx5_unload_one_devl_locked+0x2c/0xc0 [mlx5_core]
mlx5_sync_reset_unload_event+0xaf/0x2f0 [mlx5_core]
process_one_work+0x222/0x640
worker_thread+0x199/0x350
kthread+0x10b/0x230
? __pfx_worker_thread+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0x8e/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net: rose: include node references in rose_neigh refcount
Current implementation maintains two separate reference counting
mechanisms: the 'count' field in struct rose_neigh tracks references from
rose_node structures, while the 'use' field (now refcount_t) tracks
references from rose_sock.
This patch merges these two reference counting systems using 'use' field
for proper reference management. Specifically, this patch adds incrementing
and decrementing of rose_neigh->use when rose_neigh->count is incremented
or decremented.
This patch also modifies rose_rt_free(), rose_rt_device_down() and
rose_clear_route() to properly release references to rose_neigh objects
before freeing a rose_node through rose_remove_node().
These changes ensure rose_neigh structures are properly freed only when
all references, including those from rose_node structures, are released.
As a result, this resolves a slab-use-after-free issue reported by Syzbot. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Avoid undefined behavior from stopping/starting inactive events
Calling pmu->start()/stop() on perf events in PERF_EVENT_STATE_OFF can
leave event->hw.idx at -1. When PMU drivers later attempt to use this
negative index as a shift exponent in bitwise operations, it leads to UBSAN
shift-out-of-bounds reports.
The issue is a logical flaw in how event groups handle throttling when some
members are intentionally disabled. Based on the analysis and the
reproducer provided by Mark Rutland (this issue on both arm64 and x86-64).
The scenario unfolds as follows:
1. A group leader event is configured with a very aggressive sampling
period (e.g., sample_period = 1). This causes frequent interrupts and
triggers the throttling mechanism.
2. A child event in the same group is created in a disabled state
(.disabled = 1). This event remains in PERF_EVENT_STATE_OFF.
Since it hasn't been scheduled onto the PMU, its event->hw.idx remains
initialized at -1.
3. When throttling occurs, perf_event_throttle_group() and later
perf_event_unthrottle_group() iterate through all siblings, including
the disabled child event.
4. perf_event_throttle()/unthrottle() are called on this inactive child
event, which then call event->pmu->start()/stop().
5. The PMU driver receives the event with hw.idx == -1 and attempts to
use it as a shift exponent. e.g., in macros like PMCNTENSET(idx),
leading to the UBSAN report.
The throttling mechanism attempts to start/stop events that are not
actively scheduled on the hardware.
Move the state check into perf_event_throttle()/perf_event_unthrottle() so
that inactive events are skipped entirely. This ensures only active events
with a valid hw.idx are processed, preventing undefined behavior and
silencing UBSAN warnings. The corrected check ensures true before
proceeding with PMU operations.
The problem can be reproduced with the syzkaller reproducer: |
| In the Linux kernel, the following vulnerability has been resolved:
pstore/ram: Check start of empty przs during init
After commit 30696378f68a ("pstore/ram: Do not treat empty buffers as
valid"), initialization would assume a prz was valid after seeing that
the buffer_size is zero (regardless of the buffer start position). This
unchecked start value means it could be outside the bounds of the buffer,
leading to future access panics when written to:
sysdump_panic_event+0x3b4/0x5b8
atomic_notifier_call_chain+0x54/0x90
panic+0x1c8/0x42c
die+0x29c/0x2a8
die_kernel_fault+0x68/0x78
__do_kernel_fault+0x1c4/0x1e0
do_bad_area+0x40/0x100
do_translation_fault+0x68/0x80
do_mem_abort+0x68/0xf8
el1_da+0x1c/0xc0
__raw_writeb+0x38/0x174
__memcpy_toio+0x40/0xac
persistent_ram_update+0x44/0x12c
persistent_ram_write+0x1a8/0x1b8
ramoops_pstore_write+0x198/0x1e8
pstore_console_write+0x94/0xe0
...
To avoid this, also check if the prz start is 0 during the initialization
phase. If not, the next prz sanity check case will discover it (start >
size) and zap the buffer back to a sane state.
[kees: update commit log with backtrace and clarifications] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info()
The function mpi3mr_get_all_tgt_info() has four issues:
1) It calculates valid entry length in alltgt_info assuming the header part
of the struct mpi3mr_device_map_info would equal to sizeof(u32). The
correct size is sizeof(u64).
2) When it calculates the valid entry length kern_entrylen, it excludes one
entry by subtracting 1 from num_devices.
3) It copies num_device by calling memcpy(). Substitution is enough.
4) It does not specify the calculated length to sg_copy_from_buffer().
Instead, it specifies the payload length which is larger than the
alltgt_info size. It causes "BUG: KASAN: slab-out-of-bounds".
Fix the issues by using the correct header size, removing the subtraction
from num_devices, replacing the memcpy() with substitution and specifying
the correct length to sg_copy_from_buffer(). |
