| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
seg6: Fix validation of nexthop addresses
The kernel currently validates that the length of the provided nexthop
address does not exceed the specified length. This can lead to the
kernel reading uninitialized memory if user space provided a shorter
length than the specified one.
Fix by validating that the provided length exactly matches the specified
one. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: remove ptp->n_vclocks check logic in ptp_vclock_in_use()
There is no disagreement that we should check both ptp->is_virtual_clock
and ptp->n_vclocks to check if the ptp virtual clock is in use.
However, when we acquire ptp->n_vclocks_mux to read ptp->n_vclocks in
ptp_vclock_in_use(), we observe a recursive lock in the call trace
starting from n_vclocks_store().
============================================
WARNING: possible recursive locking detected
6.15.0-rc6 #1 Not tainted
--------------------------------------------
syz.0.1540/13807 is trying to acquire lock:
ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
ptp_vclock_in_use drivers/ptp/ptp_private.h:103 [inline]
ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
ptp_clock_unregister+0x21/0x250 drivers/ptp/ptp_clock.c:415
but task is already holding lock:
ffff888030704868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
n_vclocks_store+0xf1/0x6d0 drivers/ptp/ptp_sysfs.c:215
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&ptp->n_vclocks_mux);
lock(&ptp->n_vclocks_mux);
*** DEADLOCK ***
....
============================================
The best way to solve this is to remove the logic that checks
ptp->n_vclocks in ptp_vclock_in_use().
The reason why this is appropriate is that any path that uses
ptp->n_vclocks must unconditionally check if ptp->n_vclocks is greater
than 0 before unregistering vclocks, and all functions are already
written this way. And in the function that uses ptp->n_vclocks, we
already get ptp->n_vclocks_mux before unregistering vclocks.
Therefore, we need to remove the redundant check for ptp->n_vclocks in
ptp_vclock_in_use() to prevent recursive locking. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Fix NULL pointer deference on eir_get_service_data
The len parameter is considered optional so it can be NULL so it cannot
be used for skipping to next entry of EIR_SERVICE_DATA. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: sun8i-ce-cipher - fix error handling in sun8i_ce_cipher_prepare()
Fix two DMA cleanup issues on the error path in sun8i_ce_cipher_prepare():
1] If dma_map_sg() fails for areq->dst, the device driver would try to free
DMA memory it has not allocated in the first place. To fix this, on the
"theend_sgs" error path, call dma unmap only if the corresponding dma
map was successful.
2] If the dma_map_single() call for the IV fails, the device driver would
try to free an invalid DMA memory address on the "theend_iv" path:
------------[ cut here ]------------
DMA-API: sun8i-ce 1904000.crypto: device driver tries to free an invalid DMA memory address
WARNING: CPU: 2 PID: 69 at kernel/dma/debug.c:968 check_unmap+0x123c/0x1b90
Modules linked in: skcipher_example(O+)
CPU: 2 UID: 0 PID: 69 Comm: 1904000.crypto- Tainted: G O 6.15.0-rc3+ #24 PREEMPT
Tainted: [O]=OOT_MODULE
Hardware name: OrangePi Zero2 (DT)
pc : check_unmap+0x123c/0x1b90
lr : check_unmap+0x123c/0x1b90
...
Call trace:
check_unmap+0x123c/0x1b90 (P)
debug_dma_unmap_page+0xac/0xc0
dma_unmap_page_attrs+0x1f4/0x5fc
sun8i_ce_cipher_do_one+0x1bd4/0x1f40
crypto_pump_work+0x334/0x6e0
kthread_worker_fn+0x21c/0x438
kthread+0x374/0x664
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
To fix this, check for !dma_mapping_error() before calling
dma_unmap_single() on the "theend_iv" path. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/skx_common: Fix general protection fault
After loading i10nm_edac (which automatically loads skx_edac_common), if
unload only i10nm_edac, then reload it and perform error injection testing,
a general protection fault may occur:
mce: [Hardware Error]: Machine check events logged
Oops: general protection fault ...
...
Workqueue: events mce_gen_pool_process
RIP: 0010:string+0x53/0xe0
...
Call Trace:
<TASK>
? die_addr+0x37/0x90
? exc_general_protection+0x1e7/0x3f0
? asm_exc_general_protection+0x26/0x30
? string+0x53/0xe0
vsnprintf+0x23e/0x4c0
snprintf+0x4d/0x70
skx_adxl_decode+0x16a/0x330 [skx_edac_common]
skx_mce_check_error.part.0+0xf8/0x220 [skx_edac_common]
skx_mce_check_error+0x17/0x20 [skx_edac_common]
...
The issue arose was because the variable 'adxl_component_count' (inside
skx_edac_common), which counts the ADXL components, was not reset. During
the reloading of i10nm_edac, the count was incremented by the actual number
of ADXL components again, resulting in a count that was double the real
number of ADXL components. This led to an out-of-bounds reference to the
ADXL component array, causing the general protection fault above.
Fix this issue by resetting the 'adxl_component_count' in adxl_put(),
which is called during the unloading of {skx,i10nm}_edac. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix node corruption in ar->arvifs list
In current WLAN recovery code flow, ath11k_core_halt() only
reinitializes the "arvifs" list head. This will cause the
list node immediately following the list head to become an
invalid list node. Because the prev of that node still points
to the list head "arvifs", but the next of the list head "arvifs"
no longer points to that list node.
When a WLAN recovery occurs during the execution of a vif
removal, and it happens before the spin_lock_bh(&ar->data_lock)
in ath11k_mac_op_remove_interface(), list_del() will detect the
previously mentioned situation, thereby triggering a kernel panic.
The fix is to remove and reinitialize all vif list nodes from the
list head "arvifs" during WLAN halt. The reinitialization is to make
the list nodes valid, ensuring that the list_del() in
ath11k_mac_op_remove_interface() can execute normally.
Call trace:
__list_del_entry_valid_or_report+0xb8/0xd0
ath11k_mac_op_remove_interface+0xb0/0x27c [ath11k]
drv_remove_interface+0x48/0x194 [mac80211]
ieee80211_do_stop+0x6e0/0x844 [mac80211]
ieee80211_stop+0x44/0x17c [mac80211]
__dev_close_many+0xac/0x150
__dev_change_flags+0x194/0x234
dev_change_flags+0x24/0x6c
devinet_ioctl+0x3a0/0x670
inet_ioctl+0x200/0x248
sock_do_ioctl+0x60/0x118
sock_ioctl+0x274/0x35c
__arm64_sys_ioctl+0xac/0xf0
invoke_syscall+0x48/0x114
...
Tested-on: QCA6698AQ hw2.1 PCI WLAN.HSP.1.1-04591-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: at91: Fix possible out-of-boundary access
at91_gpio_probe() doesn't check that given OF alias is not available or
something went wrong when trying to get it. This might have consequences
when accessing gpio_chips array with that value as an index. Note, that
BUG() can be compiled out and hence won't actually perform the required
checks. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix WARN() in get_bpf_raw_tp_regs
syzkaller reported an issue:
WARNING: CPU: 3 PID: 5971 at kernel/trace/bpf_trace.c:1861 get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861
Modules linked in:
CPU: 3 UID: 0 PID: 5971 Comm: syz-executor205 Not tainted 6.15.0-rc5-syzkaller-00038-g707df3375124 #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861
RSP: 0018:ffffc90003636fa8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffff81c6bc4c
RDX: ffff888032efc880 RSI: ffffffff81c6bc83 RDI: 0000000000000005
RBP: ffff88806a730860 R08: 0000000000000005 R09: 0000000000000003
R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000004
R13: 0000000000000001 R14: ffffc90003637008 R15: 0000000000000900
FS: 0000000000000000(0000) GS:ffff8880d6cdf000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7baee09130 CR3: 0000000029f5a000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1934 [inline]
bpf_get_stack_raw_tp+0x24/0x160 kernel/trace/bpf_trace.c:1931
bpf_prog_ec3b2eefa702d8d3+0x43/0x47
bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline]
__bpf_prog_run include/linux/filter.h:718 [inline]
bpf_prog_run include/linux/filter.h:725 [inline]
__bpf_trace_run kernel/trace/bpf_trace.c:2363 [inline]
bpf_trace_run3+0x23f/0x5a0 kernel/trace/bpf_trace.c:2405
__bpf_trace_mmap_lock_acquire_returned+0xfc/0x140 include/trace/events/mmap_lock.h:47
__traceiter_mmap_lock_acquire_returned+0x79/0xc0 include/trace/events/mmap_lock.h:47
__do_trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline]
trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline]
__mmap_lock_do_trace_acquire_returned+0x138/0x1f0 mm/mmap_lock.c:35
__mmap_lock_trace_acquire_returned include/linux/mmap_lock.h:36 [inline]
mmap_read_trylock include/linux/mmap_lock.h:204 [inline]
stack_map_get_build_id_offset+0x535/0x6f0 kernel/bpf/stackmap.c:157
__bpf_get_stack+0x307/0xa10 kernel/bpf/stackmap.c:483
____bpf_get_stack kernel/bpf/stackmap.c:499 [inline]
bpf_get_stack+0x32/0x40 kernel/bpf/stackmap.c:496
____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1941 [inline]
bpf_get_stack_raw_tp+0x124/0x160 kernel/trace/bpf_trace.c:1931
bpf_prog_ec3b2eefa702d8d3+0x43/0x47
Tracepoint like trace_mmap_lock_acquire_returned may cause nested call
as the corner case show above, which will be resolved with more general
method in the future. As a result, WARN_ON_ONCE will be triggered. As
Alexei suggested, remove the WARN_ON_ONCE first. |
| In the Linux kernel, the following vulnerability has been resolved:
kernfs: Relax constraint in draining guard
The active reference lifecycle provides the break/unbreak mechanism but
the active reference is not truly active after unbreak -- callers don't
use it afterwards but it's important for proper pairing of kn->active
counting. Assuming this mechanism is in place, the WARN check in
kernfs_should_drain_open_files() is too sensitive -- it may transiently
catch those (rightful) callers between
kernfs_unbreak_active_protection() and kernfs_put_active() as found out by Chen
Ridong:
kernfs_remove_by_name_ns kernfs_get_active // active=1
__kernfs_remove // active=0x80000002
kernfs_drain ...
wait_event
//waiting (active == 0x80000001)
kernfs_break_active_protection
// active = 0x80000001
// continue
kernfs_unbreak_active_protection
// active = 0x80000002
...
kernfs_should_drain_open_files
// warning occurs
kernfs_put_active
To avoid the false positives (mind panic_on_warn) remove the check altogether.
(This is meant as quick fix, I think active reference break/unbreak may be
simplified with larger rework.) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Avoid __bpf_prog_ret0_warn when jit fails
syzkaller reported an issue:
WARNING: CPU: 3 PID: 217 at kernel/bpf/core.c:2357 __bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357
Modules linked in:
CPU: 3 UID: 0 PID: 217 Comm: kworker/u32:6 Not tainted 6.15.0-rc4-syzkaller-00040-g8bac8898fe39
RIP: 0010:__bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357
Call Trace:
<TASK>
bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline]
__bpf_prog_run include/linux/filter.h:718 [inline]
bpf_prog_run include/linux/filter.h:725 [inline]
cls_bpf_classify+0x74a/0x1110 net/sched/cls_bpf.c:105
...
When creating bpf program, 'fp->jit_requested' depends on bpf_jit_enable.
This issue is triggered because of CONFIG_BPF_JIT_ALWAYS_ON is not set
and bpf_jit_enable is set to 1, causing the arch to attempt JIT the prog,
but jit failed due to FAULT_INJECTION. As a result, incorrectly
treats the program as valid, when the program runs it calls
`__bpf_prog_ret0_warn` and triggers the WARN_ON_ONCE(1). |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: nand: ecc-mxic: Fix use of uninitialized variable ret
If ctx->steps is zero, the loop processing ECC steps is skipped,
and the variable ret remains uninitialized. It is later checked
and returned, which leads to undefined behavior and may cause
unpredictable results in user space or kernel crashes.
This scenario can be triggered in edge cases such as misconfigured
geometry, ECC engine misuse, or if ctx->steps is not validated
after initialization.
Initialize ret to zero before the loop to ensure correct and safe
behavior regardless of the ctx->steps value.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom-qmp-usb: Fix an NULL vs IS_ERR() bug
The qmp_usb_iomap() helper function currently returns the raw result of
devm_ioremap() for non-exclusive mappings. Since devm_ioremap() may return
a NULL pointer and the caller only checks error pointers with IS_ERR(),
NULL could bypass the check and lead to an invalid dereference.
Fix the issue by checking if devm_ioremap() returns NULL. When it does,
qmp_usb_iomap() now returns an error pointer via IOMEM_ERR_PTR(-ENOMEM),
ensuring safe and consistent error handling. |
| In the Linux kernel, the following vulnerability has been resolved:
net: tipc: fix refcount warning in tipc_aead_encrypt
syzbot reported a refcount warning [1] caused by calling get_net() on
a network namespace that is being destroyed (refcount=0). This happens
when a TIPC discovery timer fires during network namespace cleanup.
The recently added get_net() call in commit e279024617134 ("net/tipc:
fix slab-use-after-free Read in tipc_aead_encrypt_done") attempts to
hold a reference to the network namespace. However, if the namespace
is already being destroyed, its refcount might be zero, leading to the
use-after-free warning.
Replace get_net() with maybe_get_net(), which safely checks if the
refcount is non-zero before incrementing it. If the namespace is being
destroyed, return -ENODEV early, after releasing the bearer reference.
[1]: https://lore.kernel.org/all/68342b55.a70a0220.253bc2.0091.GAE@google.com/T/#m12019cf9ae77e1954f666914640efa36d52704a2 |
| In the Linux kernel, the following vulnerability has been resolved:
bcache: fix NULL pointer in cache_set_flush()
1. LINE#1794 - LINE#1887 is some codes about function of
bch_cache_set_alloc().
2. LINE#2078 - LINE#2142 is some codes about function of
register_cache_set().
3. register_cache_set() will call bch_cache_set_alloc() in LINE#2098.
1794 struct cache_set *bch_cache_set_alloc(struct cache_sb *sb)
1795 {
...
1860 if (!(c->devices = kcalloc(c->nr_uuids, sizeof(void *), GFP_KERNEL)) ||
1861 mempool_init_slab_pool(&c->search, 32, bch_search_cache) ||
1862 mempool_init_kmalloc_pool(&c->bio_meta, 2,
1863 sizeof(struct bbio) + sizeof(struct bio_vec) *
1864 bucket_pages(c)) ||
1865 mempool_init_kmalloc_pool(&c->fill_iter, 1, iter_size) ||
1866 bioset_init(&c->bio_split, 4, offsetof(struct bbio, bio),
1867 BIOSET_NEED_BVECS|BIOSET_NEED_RESCUER) ||
1868 !(c->uuids = alloc_bucket_pages(GFP_KERNEL, c)) ||
1869 !(c->moving_gc_wq = alloc_workqueue("bcache_gc",
1870 WQ_MEM_RECLAIM, 0)) ||
1871 bch_journal_alloc(c) ||
1872 bch_btree_cache_alloc(c) ||
1873 bch_open_buckets_alloc(c) ||
1874 bch_bset_sort_state_init(&c->sort, ilog2(c->btree_pages)))
1875 goto err;
^^^^^^^^
1876
...
1883 return c;
1884 err:
1885 bch_cache_set_unregister(c);
^^^^^^^^^^^^^^^^^^^^^^^^^^^
1886 return NULL;
1887 }
...
2078 static const char *register_cache_set(struct cache *ca)
2079 {
...
2098 c = bch_cache_set_alloc(&ca->sb);
2099 if (!c)
2100 return err;
^^^^^^^^^^
...
2128 ca->set = c;
2129 ca->set->cache[ca->sb.nr_this_dev] = ca;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...
2138 return NULL;
2139 err:
2140 bch_cache_set_unregister(c);
2141 return err;
2142 }
(1) If LINE#1860 - LINE#1874 is true, then do 'goto err'(LINE#1875) and
call bch_cache_set_unregister()(LINE#1885).
(2) As (1) return NULL(LINE#1886), LINE#2098 - LINE#2100 would return.
(3) As (2) has returned, LINE#2128 - LINE#2129 would do *not* give the
value to c->cache[], it means that c->cache[] is NULL.
LINE#1624 - LINE#1665 is some codes about function of cache_set_flush().
As (1), in LINE#1885 call
bch_cache_set_unregister()
---> bch_cache_set_stop()
---> closure_queue()
-.-> cache_set_flush() (as below LINE#1624)
1624 static void cache_set_flush(struct closure *cl)
1625 {
...
1654 for_each_cache(ca, c, i)
1655 if (ca->alloc_thread)
^^
1656 kthread_stop(ca->alloc_thread);
...
1665 }
(4) In LINE#1655 ca is NULL(see (3)) in cache_set_flush() then the
kernel crash occurred as below:
[ 846.712887] bcache: register_cache() error drbd6: cannot allocate memory
[ 846.713242] bcache: register_bcache() error : failed to register device
[ 846.713336] bcache: cache_set_free() Cache set 2f84bdc1-498a-4f2f-98a7-01946bf54287 unregistered
[ 846.713768] BUG: unable to handle kernel NULL pointer dereference at 00000000000009f8
[ 846.714790] PGD 0 P4D 0
[ 846.715129] Oops: 0000 [#1] SMP PTI
[ 846.715472] CPU: 19 PID: 5057 Comm: kworker/19:16 Kdump: loaded Tainted: G OE --------- - - 4.18.0-147.5.1.el8_1.5es.3.x86_64 #1
[ 846.716082] Hardware name: ESPAN GI-25212/X11DPL-i, BIOS 2.1 06/15/2018
[ 846.716451] Workqueue: events cache_set_flush [bcache]
[ 846.716808] RIP: 0010:cache_set_flush+0xc9/0x1b0 [bcache]
[ 846.717155] Code: 00 4c 89 a5 b0 03 00 00 48 8b 85 68 f6 ff ff a8 08 0f 84 88 00 00 00 31 db 66 83 bd 3c f7 ff ff 00 48 8b 85 48 ff ff ff 74 28 <48> 8b b8 f8 09 00 0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: uartlite: register uart driver in init
When two instances of uart devices are probing, a concurrency race can
occur. If one thread calls uart_register_driver function, which first
allocates and assigns memory to 'uart_state' member of uart_driver
structure, the other instance can bypass uart driver registration and
call ulite_assign. This calls uart_add_one_port, which expects the uart
driver to be fully initialized. This leads to a kernel panic due to a
null pointer dereference:
[ 8.143581] BUG: kernel NULL pointer dereference, address: 00000000000002b8
[ 8.156982] #PF: supervisor write access in kernel mode
[ 8.156984] #PF: error_code(0x0002) - not-present page
[ 8.156986] PGD 0 P4D 0
...
[ 8.180668] RIP: 0010:mutex_lock+0x19/0x30
[ 8.188624] Call Trace:
[ 8.188629] ? __die_body.cold+0x1a/0x1f
[ 8.195260] ? page_fault_oops+0x15c/0x290
[ 8.209183] ? __irq_resolve_mapping+0x47/0x80
[ 8.209187] ? exc_page_fault+0x64/0x140
[ 8.209190] ? asm_exc_page_fault+0x22/0x30
[ 8.209196] ? mutex_lock+0x19/0x30
[ 8.223116] uart_add_one_port+0x60/0x440
[ 8.223122] ? proc_tty_register_driver+0x43/0x50
[ 8.223126] ? tty_register_driver+0x1ca/0x1e0
[ 8.246250] ulite_probe+0x357/0x4b0 [uartlite]
To prevent it, move uart driver registration in to init function. This
will ensure that uart_driver is always registered when probe function
is called. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: handle csum tree error with rescue=ibadroots correctly
[BUG]
There is syzbot based reproducer that can crash the kernel, with the
following call trace: (With some debug output added)
DEBUG: rescue=ibadroots parsed
BTRFS: device fsid 14d642db-7b15-43e4-81e6-4b8fac6a25f8 devid 1 transid 8 /dev/loop0 (7:0) scanned by repro (1010)
BTRFS info (device loop0): first mount of filesystem 14d642db-7b15-43e4-81e6-4b8fac6a25f8
BTRFS info (device loop0): using blake2b (blake2b-256-generic) checksum algorithm
BTRFS info (device loop0): using free-space-tree
BTRFS warning (device loop0): checksum verify failed on logical 5312512 mirror 1 wanted 0xb043382657aede36608fd3386d6b001692ff406164733d94e2d9a180412c6003 found 0x810ceb2bacb7f0f9eb2bf3b2b15c02af867cb35ad450898169f3b1f0bd818651 level 0
DEBUG: read tree root path failed for tree csum, ret=-5
BTRFS warning (device loop0): checksum verify failed on logical 5328896 mirror 1 wanted 0x51be4e8b303da58e6340226815b70e3a93592dac3f30dd510c7517454de8567a found 0x51be4e8b303da58e634022a315b70e3a93592dac3f30dd510c7517454de8567a level 0
BTRFS warning (device loop0): checksum verify failed on logical 5292032 mirror 1 wanted 0x1924ccd683be9efc2fa98582ef58760e3848e9043db8649ee382681e220cdee4 found 0x0cb6184f6e8799d9f8cb335dccd1d1832da1071d12290dab3b85b587ecacca6e level 0
process 'repro' launched './file2' with NULL argv: empty string added
DEBUG: no csum root, idatacsums=0 ibadroots=134217728
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000041: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000208-0x000000000000020f]
CPU: 5 UID: 0 PID: 1010 Comm: repro Tainted: G OE 6.15.0-custom+ #249 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:btrfs_lookup_csum+0x93/0x3d0 [btrfs]
Call Trace:
<TASK>
btrfs_lookup_bio_sums+0x47a/0xdf0 [btrfs]
btrfs_submit_bbio+0x43e/0x1a80 [btrfs]
submit_one_bio+0xde/0x160 [btrfs]
btrfs_readahead+0x498/0x6a0 [btrfs]
read_pages+0x1c3/0xb20
page_cache_ra_order+0x4b5/0xc20
filemap_get_pages+0x2d3/0x19e0
filemap_read+0x314/0xde0
__kernel_read+0x35b/0x900
bprm_execve+0x62e/0x1140
do_execveat_common.isra.0+0x3fc/0x520
__x64_sys_execveat+0xdc/0x130
do_syscall_64+0x54/0x1d0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
---[ end trace 0000000000000000 ]---
[CAUSE]
Firstly the fs has a corrupted csum tree root, thus to mount the fs we
have to go "ro,rescue=ibadroots" mount option.
Normally with that mount option, a bad csum tree root should set
BTRFS_FS_STATE_NO_DATA_CSUMS flag, so that any future data read will
ignore csum search.
But in this particular case, we have the following call trace that
caused NULL csum root, but not setting BTRFS_FS_STATE_NO_DATA_CSUMS:
load_global_roots_objectid():
ret = btrfs_search_slot();
/* Succeeded */
btrfs_item_key_to_cpu()
found = true;
/* We found the root item for csum tree. */
root = read_tree_root_path();
if (IS_ERR(root)) {
if (!btrfs_test_opt(fs_info, IGNOREBADROOTS))
/*
* Since we have rescue=ibadroots mount option,
* @ret is still 0.
*/
break;
if (!found || ret) {
/* @found is true, @ret is 0, error handling for csum
* tree is skipped.
*/
}
This means we completely skipped to set BTRFS_FS_STATE_NO_DATA_CSUMS if
the csum tree is corrupted, which results unexpected later csum lookup.
[FIX]
If read_tree_root_path() failed, always populate @ret to the error
number.
As at the end of the function, we need @ret to determine if we need to
do the extra error handling for csum tree. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: wcd9335: Fix missing free of regulator supplies
Driver gets and enables all regulator supplies in probe path
(wcd9335_parse_dt() and wcd9335_power_on_reset()), but does not cleanup
in final error paths and in unbind (missing remove() callback). This
leads to leaked memory and unbalanced regulator enable count during
probe errors or unbind.
Fix this by converting entire code into devm_regulator_bulk_get_enable()
which also greatly simplifies the code. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pkey: Prevent overflow in size calculation for memdup_user()
Number of apqn target list entries contained in 'nr_apqns' variable is
determined by userspace via an ioctl call so the result of the product in
calculation of size passed to memdup_user() may overflow.
In this case the actual size of the allocated area and the value
describing it won't be in sync leading to various types of unpredictable
behaviour later.
Use a proper memdup_array_user() helper which returns an error if an
overflow is detected. Note that it is different from when nr_apqns is
initially zero - that case is considered valid and should be handled in
subsequent pkey_handler implementations.
Found by Linux Verification Center (linuxtesting.org). |
| In the Linux kernel, the following vulnerability has been resolved:
atm: clip: prevent NULL deref in clip_push()
Blamed commit missed that vcc_destroy_socket() calls
clip_push() with a NULL skb.
If clip_devs is NULL, clip_push() then crashes when reading
skb->truesize. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix out-of-bounds read in snd_usb_get_audioformat_uac3()
In snd_usb_get_audioformat_uac3(), the length value returned from
snd_usb_ctl_msg() is used directly for memory allocation without
validation. This length is controlled by the USB device.
The allocated buffer is cast to a uac3_cluster_header_descriptor
and its fields are accessed without verifying that the buffer
is large enough. If the device returns a smaller than expected
length, this leads to an out-of-bounds read.
Add a length check to ensure the buffer is large enough for
uac3_cluster_header_descriptor. |
