| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Nozomi Networks Labs identified a CWE-288: Authentication Bypass Using an Alternate Path or Channel in the Console WebUI in Waterfall WF-500 TX and RX Hosts in version 7.9.1.0 R2502171040 that allows remote unauthenticated attackers to bypass authentication of the Console web application and perform actions as an authenticated user. |
| Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') in the Console WebUI in Waterfall WF-500 TX and RX Hosts in version 7.9.1.0 R2502171040 that allows remote unauthenticated attackers to execute arbitrary operating system commands on the device. |
| Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') in the Console WebUI in Waterfall WF-500 TX and RX Hosts in version 7.9.1.0 R2502171040 that allows remote unauthenticated attackers to execute arbitrary operating system commands on the device. |
| Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') in the Console WebUI in Waterfall WF-500 TX and RX Hosts in version 7.9.1.0 R2502171040 that allows remote unauthenticated attackers to execute arbitrary operating system commands on the device. |
| Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') in the Console WebUI in Waterfall WF-500 TX and RX Hosts in version 7.9.1.0 R2502171040 that allows remote unauthenticated attackers to execute arbitrary operating system commands on the device. |
| FreePBX is an open source IP PBX. From 15.0.42 to before 16.0.45 and 17.0.7, unauthenticated users may be able to access the User Control Panel (UCP) using hard-coded initial template credentials if these were not immediately changed by the Administrator who enabled UCP. Authenticated access to ACP is required for the initial setup of UCP generic templates, but after that, without further steps by the admin, unauthenticated users may be able to gain access. This vulnerability is fixed in 16.0.45 and 17.0.7. |
| Portainer Community Edition is a lightweight service delivery platform for containerized applications that can be used to manage Docker, Swarm, Kubernetes and ACI environments. From 2.33.0 to before 2.33.8, 2.39.2, and 2.41.0, Portainer enforces seven EndpointSecuritySettings restrictions that administrators configure to restrict the container configurations non-admin users can launch: privileged mode, host PID namespace, device mapping, capabilities, sysctls, security-opt (Seccomp / AppArmor), and bind mounts. These restrictions are enforced on the standard container creation path, but several of them are not applied on the Docker Swarm service API. This vulnerability is fixed in 2.33.8, 2.39.2, and 2.41.0. |
| In certain scenarios when the admin has enabled Interactive Connectivity Establishment (ICE), a buffer overflow could enable
remote code execution on Poly Voice products on the Linux platform. |
| Impact@fastify/express v4.0.4 and earlier fails to normalize URLs before passing them to Express middleware when Fastify router normalization options are enabled. This allows complete bypass of path-scoped authentication middleware via duplicate slashes when ignoreDuplicateSlashes is enabled, or via semicolon delimiters when useSemicolonDelimiter is enabled. In both cases, Fastify router normalizes the URL and matches the route, but @fastify/express passes the original un-normalized URL to Express middleware, which fails to match and is skipped. An unauthenticated attacker can access protected routes by manipulating the URL path.
PatchesUpgrade to @fastify/express v4.0.5 or later. |
| @fastify/reply-from v12.6.1 and earlier and @fastify/http-proxy v11.4.3 and earlier process the client's Connection header after the proxy has added its own headers via rewriteRequestHeaders. This allows attackers to retroactively strip proxy-added headers from upstream requests by listing them in the Connection header value. Any header added by the proxy for routing, access control, or security purposes can be selectively removed by a client. @fastify/http-proxy is also affected as it delegates to @fastify/reply-from.
Upgrade to @fastify/reply-from v12.6.2 or @fastify/http-proxy v11.4.4 or later. |
| The vulnerability in the Tassos Framework Plugin allows users to delete arbitrary files on the affected sites. |
| Slican telephone exchanges allow administrative protocol authentication bypass. An attacker can bypass the need to enter login credentials by executing the appropriate command.
This issue was fixed in versions below:
- NCP: version 1.24.0250
- IPx series: version 6.61.0040
- CCT-1668: version 6.56.0430
- MAC-6400: version 6.56.0430
- CXS-0424: version 6.30.0510
The issue STILL EXISTS in End-Of-Life telephone exchanges in versions 4.xx and below:
- CCT-1668 (CCT1CPU)
- MAC-6400
- CXS-0424
These products were discontinued in 2011 and 2012 and and will not receive updates. These products require a hardware update in order to receive a software update. The vendor recommends that users of these devices contact the their service department directly to determine the options for upgrading. |
| In Slican telephone exchanges it is possible to manage the control panel remotely. An unauthenticated attacker can connect to the modem via a telephone with a specific caller ID. This allows them to bypass admin authentication and gain full access to the service protocol and configuration panel. This vulnerability is independent of the telephone exchanges configuration. If remote access is disabled, calling with this caller ID will temporarily enable it.
This issue was fixed in versions below:
- IPL-256: version 6.61.0040
- IPM-032: version 6.61.0040
- CCT-1668: version 6.56.0430
- MAC-6400: version 6.56.0430
- CXS-0424: version 6.30.0510
The issue STILL EXISTS in End-Of-Life telephone exchanges in versions 4.xx and below:
- CCT-1668 (CCT1CPU)
- MAC-6400
- CXS-0424
These products were discontinued in 2011 and 2012 and and will not receive updates. These products require a hardware update in order to receive a software update. The vendor recommends that users of these devices contact the their service department directly to determine the options for upgrading. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') in the Publish Audit API endpoints (/api/auditPublishing/get and /api/auditPublishing/getAll) in dotCMS Core 25.11.04-1 through 26.04.28-02 allows remote unauthenticated attackers to read, modify, or destroy arbitrary database content. The endpoints did not enforce authentication and accepted unsanitized input used in dynamically constructed SQL. The fix in dotCMS Core 26.04.28-03 requires an authenticated backend user with the publishing-queue portlet permission. LTS releases are not affected as the vulnerable code path was never backported. |
| electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. In 3.8.8 and earlier, there is persistent local-pty code execution via imported bookmarks or compromised sync targets. Affects users who import bookmark JSON files or who have electerm sync configured (gist/WebDAV). The attacker can inject exec* fields or global config to cause remote code to run when a bookmark is opened or when sync is applied. |
| Trilium Notes is a cross-platform, hierarchical note taking application focused on building large personal knowledge bases. Prior to 0.102.2, a malicious ZIP archive imported with safe import enabled achieves RCE via #docName path traversal and XSS by combining a payload note (type: code, mime: text/plain) containing raw HTML/JS and a trigger note (type: doc or type: launcher) with a #docName label that uses ../ path traversal to point at the payload note's API endpoint. The desktop client Electron renderer runs with nodeIntegration enabled, so an RCE is triggered once the payload is executed. This vulnerability is fixed in 0.102.2. |
| There is an authentication bypass vulnerability in the NI SystemLink Enterprise Dashboard application that may allow an unauthenticated remote attacker to bypass authentication controls leading to privilege escalation or information disclosure. Successful exploitation requires an attacker to send a specially crafted HTTP request. This vulnerability affects NI SystemLink Enterprise 2026-04 and prior versions. |
| A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. This affects the function setDdnsCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Such manipulation of the argument provider leads to os command injection. The attack may be launched remotely. The exploit is publicly available and might be used. |
| Vulnerable to DNS rebinding attacks when using SSE (http://b/499408790). During the beta phase, we implemented `allowed-origins` and `allowed-hosts` flags to align with MCP security guidelines. However, the hardcoded `Access-Control-Allow-Origin: *` header in the SSE initialization handler was inadvertently retained. This vulnerability specifically impacts users connecting via Toolbox using SSE under specification v2024-11-05. |
| The Mennekes Amtron series (firmware versions ≤ 5.22.3) is vulnerable to an authentication bypass. An unauthenticated remote attacker can change the password of the user account via a crafted POST request to the /operator/operator endpoint. |
