| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Protection for Outbound Error Messages and Alert Signals vulnerability in Virames Vira-Investing allows Account Footprinting.
This issue affects Vira-Investing: before 1.0.84.86. |
| When generating an ICMP Destination Unreachable or Packet Too Big response, the handler copies a portion of the original packet into the ICMP error body using the IP header's self-declared total length (ip_tot_len for IPv4, ip6_plen for IPv6) without validating it against the actual packet buffer size. A VM can send a short packet with an inflated IP length field that triggers an ICMP error (e.g., by hitting a reject ACL), causing ovn-controller to read heap memory beyond the valid packet data and include it in the ICMP response sent back to the VM. |
| A flaw was found in OVN (Open Virtual Network). A remote attacker, by sending crafted DHCPv6 (Dynamic Host Configuration Protocol for IPv6) SOLICIT packets with an inflated Client ID length, could cause the ovn-controller to read beyond the bounds of a packet. This out-of-bounds read can lead to the disclosure of sensitive information stored in heap memory, which is then returned to the attacker's virtual machine port. |
| In Slican telephone exchanges secure key is generated in a predictable manner using properties of the telephone exchange which can be obtained without authentication. An unauthenticated attacker can deduce the secure key and obtain admin credentials.
This issue was fixed in versions below:
- IPx series: version 6.61.0040
- CCT-1668: version 6.56.0430
- MAC-6400: version 6.56.0430
- CXS-0424: version 6.30.0510
The issue STILL EXISTS in End-Of-Life telephone exchanges in versions 4.xx and below:
- CCT-1668 (CCT1CPU)
- MAC-6400
- CXS-0424
These products were discontinued in 2011 and 2012 and and will not receive updates. These products require a hardware update in order to receive a software update. The vendor recommends that users of these devices contact the their service department directly to determine the options for upgrading. |
| Dlink DWR-X1820 router uses weak default password generated from its IMEI number and does not require users to change it. An attacker who knows how passwords are generated can easily crack the default password if they have the device IMEI number.
This issue was fixed in version 1.00B16CP. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: fix race between ICReq handling and queue teardown
nvmet_tcp_handle_icreq() updates queue->state after sending an
Initialization Connection Response (ICResp), but it does so without
serializing against target-side queue teardown.
If an NVMe/TCP host sends an Initialization Connection Request
(ICReq) and immediately closes the connection, target-side teardown
may start in softirq context before io_work drains the already
buffered ICReq. In that case, nvmet_tcp_schedule_release_queue()
sets queue->state to NVMET_TCP_Q_DISCONNECTING and drops the queue
reference under state_lock.
If io_work later processes that ICReq, nvmet_tcp_handle_icreq() can
still overwrite the state back to NVMET_TCP_Q_LIVE. That defeats the
DISCONNECTING-state guard in nvmet_tcp_schedule_release_queue() and
allows a later socket state change to re-enter teardown and issue a
second kref_put() on an already released queue.
The ICResp send failure path has the same problem. If teardown has
already moved the queue to DISCONNECTING, a send error can still
overwrite the state with NVMET_TCP_Q_FAILED, again reopening the
window for a second teardown path to drop the queue reference.
Fix this by serializing both post-send state transitions with
state_lock and bailing out if teardown has already started.
Use -ESHUTDOWN as an internal sentinel for that bail-out path rather
than propagating it as a transport error like -ECONNRESET. Keep
nvmet_tcp_socket_error() setting rcv_state to NVMET_TCP_RECV_ERR before
honoring that sentinel so receive-side parsing stays quiesced until the
existing release path completes. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Reject non-8-byte ATOMIC_WRITE payloads
atomic_write_reply() at drivers/infiniband/sw/rxe/rxe_resp.c
unconditionally dereferences 8 bytes at payload_addr(pkt):
value = *(u64 *)payload_addr(pkt);
check_rkey() previously accepted an ATOMIC_WRITE request with pktlen ==
resid == 0 because the length validation only compared pktlen against
resid. A remote initiator that sets the RETH length to 0 therefore reaches
atomic_write_reply() with a zero-byte logical payload, and the responder
reads sizeof(u64) bytes from past the logical end of the packet into
skb->head tailroom, then writes those 8 bytes into the attacker's MR via
rxe_mr_do_atomic_write(). That is a remote disclosure of 4 bytes of kernel
tailroom per probe (the other 4 bytes are the packet's own trailing ICRC).
IBA oA19-28 defines ATOMIC_WRITE as exactly 8 bytes. Anything else is
protocol-invalid. Hoist a strict length check into check_rkey() so the
responder never reaches the unchecked dereference, and keep the existing
WRITE-family length logic for the normal RDMA WRITE path.
Reproduced on mainline with an unmodified rxe driver: a sustained
zero-length ATOMIC_WRITE probe repeatedly leaks adjacent skb head-buffer
bytes into the attacker's MR, including recognisable kernel strings and
partial kernel-direct-map pointer words. With this patch applied the
responder rejects the PDU and the MR stays all-zero. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpt3sas: Limit NVMe request size to 2 MiB
The HBA firmware reports NVMe MDTS values based on the underlying drive
capability. However, because the driver allocates a fixed 4K buffer for
the PRP list, accommodating at most 512 entries, the driver supports a
maximum I/O transfer size of 2 MiB.
Limit max_hw_sectors to the smaller of the reported MDTS and the 2 MiB
driver limit to prevent issuing oversized I/O that may lead to a kernel
oops. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/iwcm: Fix workqueue list corruption by removing work_list
The commit e1168f0 ("RDMA/iwcm: Simplify cm_event_handler()")
changed the work submission logic to unconditionally call
queue_work() with the expectation that queue_work() would
have no effect if work was already pending. The problem is
that a free list of struct iwcm_work is used (for which
struct work_struct is embedded), so each call to queue_work()
is basically unique and therefore does indeed queue the work.
This causes a problem in the work handler which walks the work_list
until it's empty to process entries. This means that a single
run of the work handler could process item N+1 and release it
back to the free list while the actual workqueue entry is still
queued. It could then get reused (INIT_WORK...) and lead to
list corruption in the workqueue logic.
Fix this by just removing the work_list. The workqueue already
does this for us.
This fixes the following error that was observed when stress
testing with ucmatose on an Intel E830 in iWARP mode:
[ 151.465780] list_del corruption. next->prev should be ffff9f0915c69c08, but was ffff9f0a1116be08. (next=ffff9f0a15b11c08)
[ 151.466639] ------------[ cut here ]------------
[ 151.466986] kernel BUG at lib/list_debug.c:67!
[ 151.467349] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[ 151.467753] CPU: 14 UID: 0 PID: 2306 Comm: kworker/u64:18 Not tainted 6.19.0-rc4+ #1 PREEMPT(voluntary)
[ 151.468466] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 151.469192] Workqueue: 0x0 (iw_cm_wq)
[ 151.469478] RIP: 0010:__list_del_entry_valid_or_report+0xf0/0x100
[ 151.469942] Code: c7 58 5f 4c b2 e8 10 50 aa ff 0f 0b 48 89 ef e8 36 57 cb ff 48 8b 55 08 48 89 e9 48 89 de 48 c7 c7 a8 5f 4c b2 e8 f0 4f aa ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 90 90 90 90 90 90
[ 151.471323] RSP: 0000:ffffb15644e7bd68 EFLAGS: 00010046
[ 151.471712] RAX: 000000000000006d RBX: ffff9f0915c69c08 RCX: 0000000000000027
[ 151.472243] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9f0a37d9c600
[ 151.472768] RBP: ffff9f0a15b11c08 R08: 0000000000000000 R09: c0000000ffff7fff
[ 151.473294] R10: 0000000000000001 R11: ffffb15644e7bba8 R12: ffff9f092339ee68
[ 151.473817] R13: ffff9f0900059c28 R14: ffff9f092339ee78 R15: 0000000000000000
[ 151.474344] FS: 0000000000000000(0000) GS:ffff9f0a847b5000(0000) knlGS:0000000000000000
[ 151.474934] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 151.475362] CR2: 0000559e233a9088 CR3: 000000020296b004 CR4: 0000000000770ef0
[ 151.475895] PKRU: 55555554
[ 151.476118] Call Trace:
[ 151.476331] <TASK>
[ 151.476497] move_linked_works+0x49/0xa0
[ 151.476792] __pwq_activate_work.isra.46+0x2f/0xa0
[ 151.477151] pwq_dec_nr_in_flight+0x1e0/0x2f0
[ 151.477479] process_scheduled_works+0x1c8/0x410
[ 151.477823] worker_thread+0x125/0x260
[ 151.478108] ? __pfx_worker_thread+0x10/0x10
[ 151.478430] kthread+0xfe/0x240
[ 151.478671] ? __pfx_kthread+0x10/0x10
[ 151.478955] ? __pfx_kthread+0x10/0x10
[ 151.479240] ret_from_fork+0x208/0x270
[ 151.479523] ? __pfx_kthread+0x10/0x10
[ 151.479806] ret_from_fork_asm+0x1a/0x30
[ 151.480103] </TASK> |
| RustFS is a distributed object storage system built in Rust. Prior to 1.0.0-beta.2, the internode RPC layer authenticates every request with an HMAC-SHA256 signature using a shared secret. The function that produces this secret, get_shared_secret() in crates/ecstore/src/rpc/http_auth.rs, falls back to the public, source-tree-embedded DEFAULT_SECRET_KEY = "rustfsadmin" when neither the RUSTFS_RPC_SECRET environment variable nor the global S3 secret key has been configured. This vulnerability is fixed in 1.0.0-beta.2. |
| Nautobot is a Network Source of Truth and Network Automation Platform. Prior to 2.4.33 and 3.1.2, Nautobot UI object-bulk-rename endpoints (for example, /dcim/interfaces/rename/) were vulnerable to application-wide denial of service via maliciously crafted regular expressions in the find field in combination with the use_regex flag. This vulnerability is fixed in 2.4.33 and 3.1.2. |
| A buffer overflow exists in the Brotli library versions prior to 1.0.8 where an attacker controlling the input length of a "one-shot" decompression request to a script can trigger a crash, which happens when copying over chunks of data larger than 2 GiB. It is recommended to update your Brotli library to 1.0.8 or later. If one cannot update, we recommend to use the "streaming" API as opposed to the "one-shot" API, and impose chunk size limits. |
| Formie is a Craft CMS plugin for creating forms. Prior to 2.2.20 and 3.1.24, unauthenticated users could submit crafted values into Hidden fields (with Default value → Custom) that were evaluated as Twig during submission handling, which could lead to serious compromise of the Craft site (depending on template/sandbox behavior). This vulnerability is fixed in 2.2.20 and 3.1.24. |
| mouse07410/asn1c is an ASN.1 compiler. In 1.4 and earlier, a memory safety vulnerability was identified in the OER decoding skeleton files generated by asn1c (specifically INTEGER_oer.c). When parsing a maliciously crafted, zero-length OER payload for a variable-length, non-negative INTEGER type, the decoder fails to validate the required bytes before extracting the Most Significant Bit (MSB). This forces a precise 1-byte Heap Out-of-Bounds (OOB) Read. Because asn1c generated code is primarily deployed to parse untrusted network inputs (such as V2X network protocols, 5G telecom headers, or X.509 certificates), when the decoder processes untrusted network-originated input, a remote attacker can exploit this to cause a Denial of Service (DoS) or trigger incorrect integer interpretation in downstream applications (e.g., protocol state poisoning or logic bypass). |
| Improper handling of physical conditions in the bike-shutdown control of the Indian Motorcycle Scout Bobber + Tech 2025 model year allows a physical attacker with access to the Wireless Control Module (WCM) wiring harness to bypass the anti-theft shutdown. The WCM signals shutdown to a peer ECU via a falling-edge voltage transition on a dedicated wire pair. The receiving ECU does not distinguish between an active shutdown pulse and an open-circuit / disconnected condition; interrupting the relevant wires leaves the motorcycle fully operable even though the WCM never validated the rider's PIN. Specific connector details have been withheld pending vendor remediation. |
| RVF (formerly Remix Validated Form) provides easy form validation and state management for React. From 6.0.0 to before 6.0.4 and 7.0.2, setPath in @rvf/set-get (used by @rvf/core to flatten incoming form data into a nested object) does not block the keys __proto__, constructor, or prototype when walking a path. Because field names in submitted form data are passed directly to setPath via preprocessFormData (and through parseFormData / validate), an attacker who can submit a form to a Remix / React Router app using the library can set arbitrary properties on Object.prototype of the running server process. This is a default-reachable prototype pollution primitive: no special configuration is required. Any endpoint that accepts a form via parseFormData or runs a validator created with createValidator is affected. This vulnerability is fixed in 6.0.4 and 7.0.2. |
| Weak authentication in the Wireless Control Module (WCM) of the Indian Motorcycle Scout Bobber + Tech 2025 model year allows an adjacent-network attacker with read access to the in-vehicle network to recover the user-set unlock PIN by passively observing a single PIN authentication exchange. The Infotainment Digital Round display computes its response using a non-cryptographic operation rather than a cryptographic challenge-response, so the PIN is mathematically derivable from one captured exchange, defeating the motorcycle's primary user-authentication control. Specific protocol details have been withheld pending vendor remediation. |
| Weak authentication between the Wireless Control Module (WCM) and the Engine Control Module (ECM) of the Indian Motorcycle Scout Bobber + Tech 2025 model year allows an adjacent-network attacker with read access to the in-vehicle network to recover the per-vehicle ECM immobilizer secret by passively observing a single seed/key exchange. The WCM derives its response using a reversible, non-cryptographic operation rather than a cryptographic challenge-response, so the persistent immobilizer secret can be reconstructed from one captured exchange. With this secret the attacker can authenticate to the ECM independently of the WCM and start the engine, defeating the immobilizer. Specific protocol details have been withheld pending vendor remediation. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix out-of-bounds memset in command slot handling
The remaining space in a command slot may be smaller than the size of
the command header. Clearing the command header with memset() before
verifying the available slot space can result in an out-of-bounds write
and memory corruption.
Fix this by moving the memset() call after the size validation. |
| A privilege escalation vulnerability exists during the installation of Norton Secure VPN via the Microsoft Store. A low-privilege user can replace files during the installation process, which may result in deletion of arbitrary files that can lead to elevation of privileges. |
