| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
igb: Do not free q_vector unless new one was allocated
Avoid potential use-after-free condition under memory pressure. If the
kzalloc() fails, q_vector will be freed but left in the original
adapter->q_vector[v_idx] array position. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vkms: Fix memory leak in vkms_init()
A memory leak was reported after the vkms module install failed.
unreferenced object 0xffff88810bc28520 (size 16):
comm "modprobe", pid 9662, jiffies 4298009455 (age 42.590s)
hex dump (first 16 bytes):
01 01 00 64 81 88 ff ff 00 00 dc 0a 81 88 ff ff ...d............
backtrace:
[<00000000e7561ff8>] kmalloc_trace+0x27/0x60
[<000000000b1954a0>] 0xffffffffc45200a9
[<00000000abbf1da0>] do_one_initcall+0xd0/0x4f0
[<000000001505ee87>] do_init_module+0x1a4/0x680
[<00000000958079ad>] load_module+0x6249/0x7110
[<00000000117e4696>] __do_sys_finit_module+0x140/0x200
[<00000000f74b12d2>] do_syscall_64+0x35/0x80
[<000000008fc6fcde>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
The reason is that the vkms_init() returns without checking the return
value of vkms_create(), and if the vkms_create() failed, the config
allocated at the beginning of vkms_init() is leaked.
vkms_init()
config = kmalloc(...) # config allocated
...
return vkms_create() # vkms_create failed and config is leaked
Fix this problem by checking return value of vkms_create() and free the
config if error happened. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250: Reinit port->pm on port specific driver unbind
When we unbind a serial port hardware specific 8250 driver, the generic
serial8250 driver takes over the port. After that we see an oops about 10
seconds later. This can produce the following at least on some TI SoCs:
Unhandled fault: imprecise external abort (0x1406)
Internal error: : 1406 [#1] SMP ARM
Turns out that we may still have the serial port hardware specific driver
port->pm in use, and serial8250_pm() tries to call it after the port
specific driver is gone:
serial8250_pm [8250_base] from uart_change_pm+0x54/0x8c [serial_base]
uart_change_pm [serial_base] from uart_hangup+0x154/0x198 [serial_base]
uart_hangup [serial_base] from __tty_hangup.part.0+0x328/0x37c
__tty_hangup.part.0 from disassociate_ctty+0x154/0x20c
disassociate_ctty from do_exit+0x744/0xaac
do_exit from do_group_exit+0x40/0x8c
do_group_exit from __wake_up_parent+0x0/0x1c
Let's fix the issue by calling serial8250_set_defaults() in
serial8250_unregister_port(). This will set the port back to using
the serial8250 default functions, and sets the port->pm to point to
serial8250_pm. |
| In the Linux kernel, the following vulnerability has been resolved:
media: ov8865: Fix an error handling path in ov8865_probe()
The commit in Fixes also introduced some new error handling which should
goto the existing error handling path.
Otherwise some resources leak. |
| In the Linux kernel, the following vulnerability has been resolved:
kprobes: Fix check for probe enabled in kill_kprobe()
In kill_kprobe(), the check whether disarm_kprobe_ftrace() needs to be
called always fails. This is because before that we set the
KPROBE_FLAG_GONE flag for kprobe so that "!kprobe_disabled(p)" is always
false.
The disarm_kprobe_ftrace() call introduced by commit:
0cb2f1372baa ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler")
to fix the NULL pointer reference problem. When the probe is enabled, if
we do not disarm it, this problem still exists.
Fix it by putting the probe enabled check before setting the
KPROBE_FLAG_GONE flag. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: prevent soft lockup while flush writes
Currently, there is no limit for raid1/raid10 plugged bio. While flushing
writes, raid1 has cond_resched() while raid10 doesn't, and too many
writes can cause soft lockup.
Follow up soft lockup can be triggered easily with writeback test for
raid10 with ramdisks:
watchdog: BUG: soft lockup - CPU#10 stuck for 27s! [md0_raid10:1293]
Call Trace:
<TASK>
call_rcu+0x16/0x20
put_object+0x41/0x80
__delete_object+0x50/0x90
delete_object_full+0x2b/0x40
kmemleak_free+0x46/0xa0
slab_free_freelist_hook.constprop.0+0xed/0x1a0
kmem_cache_free+0xfd/0x300
mempool_free_slab+0x1f/0x30
mempool_free+0x3a/0x100
bio_free+0x59/0x80
bio_put+0xcf/0x2c0
free_r10bio+0xbf/0xf0
raid_end_bio_io+0x78/0xb0
one_write_done+0x8a/0xa0
raid10_end_write_request+0x1b4/0x430
bio_endio+0x175/0x320
brd_submit_bio+0x3b9/0x9b7 [brd]
__submit_bio+0x69/0xe0
submit_bio_noacct_nocheck+0x1e6/0x5a0
submit_bio_noacct+0x38c/0x7e0
flush_pending_writes+0xf0/0x240
raid10d+0xac/0x1ed0
Fix the problem by adding cond_resched() to raid10 like what raid1 did.
Note that unlimited plugged bio still need to be optimized, for example,
in the case of lots of dirty pages writeback, this will take lots of
memory and io will spend a long time in plug, hence io latency is bad. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf/dma-resv: Stop leaking on krealloc() failure
Currently dma_resv_get_fences() will leak the previously
allocated array if the fence iteration got restarted and
the krealloc_array() fails.
Free the old array by hand, and make sure we still clear
the returned *fences so the caller won't end up accessing
freed memory. Some (but not all) of the callers of
dma_resv_get_fences() seem to still trawl through the
array even when dma_resv_get_fences() failed. And let's
zero out *num_fences as well for good measure. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: hv: Fix a crash in hv_pci_restore_msi_msg() during hibernation
When a Linux VM with an assigned PCI device runs on Hyper-V, if the PCI
device driver is not loaded yet (i.e. MSI-X/MSI is not enabled on the
device yet), doing a VM hibernation triggers a panic in
hv_pci_restore_msi_msg() -> msi_lock_descs(&pdev->dev), because
pdev->dev.msi.data is still NULL.
Avoid the panic by checking if MSI-X/MSI is enabled. |
| Stored cross-site scripting (XSS) vulnerability in Liferay Portal 7.4.0 through 7.4.3.111, and older unsupported versions, and Liferay DXP 2023.Q4.0, 2023.Q3.1 through 2023.Q3.4, 7.4 GA through update 92, 7.3 GA through update 35, and older unsupported versions allows remote authenticated attackers with the instance administrator role to inject arbitrary web script or HTML into all pages via a crafted payload injected into the Instance Configuration's (1) CDN Host HTTP text field or (2) CDN Host HTTPS text field. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/sme: Set new vector length before reallocating
As part of fixing the allocation of the buffer for SVE state when changing
SME vector length we introduced an immediate reallocation of the SVE state,
this is also done when changing the SVE vector length for consistency.
Unfortunately this reallocation is done prior to writing the new vector
length to the task struct, meaning the allocation is done with the old
vector length and can lead to memory corruption due to an undersized buffer
being used.
Move the update of the vector length before the allocation to ensure that
the new vector length is taken into account.
For some reason this isn't triggering any problems when running tests on
the arm64 fixes branch (even after repeated tries) but is triggering
issues very often after merge into mainline. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: rtsx_pci: fix return value check of mmc_add_host()
mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.
So fix this by checking the return value and calling mmc_free_host() in the
error path, beside, runtime PM also needs be disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: uhci: fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once. |
| A security flaw has been discovered in Campcodes Online Job Finder System 1.0. This issue affects some unknown processing of the file /advancesearch.php. Performing manipulation of the argument Username results in sql injection. The attack is possible to be carried out remotely. The exploit has been released to the public and may be exploited. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: fix use-after-free on source server when doing inter-server copy
Use-after-free occurred when the laundromat tried to free expired
cpntf_state entry on the s2s_cp_stateids list after inter-server
copy completed. The sc_cp_list that the expired copy state was
inserted on was already freed.
When COPY completes, the Linux client normally sends LOCKU(lock_state x),
FREE_STATEID(lock_state x) and CLOSE(open_state y) to the source server.
The nfs4_put_stid call from nfsd4_free_stateid cleans up the copy state
from the s2s_cp_stateids list before freeing the lock state's stid.
However, sometimes the CLOSE was sent before the FREE_STATEID request.
When this happens, the nfsd4_close_open_stateid call from nfsd4_close
frees all lock states on its st_locks list without cleaning up the copy
state on the sc_cp_list list. When the time the FREE_STATEID arrives the
server returns BAD_STATEID since the lock state was freed. This causes
the use-after-free error to occur when the laundromat tries to free
the expired cpntf_state.
This patch adds a call to nfs4_free_cpntf_statelist in
nfsd4_close_open_stateid to clean up the copy state before calling
free_ol_stateid_reaplist to free the lock state's stid on the reaplist. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: qcom: fix writes in read-only memory region
This commit fixes a kernel oops because of a write in some read-only memory:
[ 9.068287] Unable to handle kernel write to read-only memory at virtual address ffff800009240ad8
..snip..
[ 9.138790] Internal error: Oops: 9600004f [#1] PREEMPT SMP
..snip..
[ 9.269161] Call trace:
[ 9.276271] __memcpy+0x5c/0x230
[ 9.278531] snprintf+0x58/0x80
[ 9.282002] qcom_cpufreq_msm8939_name_version+0xb4/0x190
[ 9.284869] qcom_cpufreq_probe+0xc8/0x39c
..snip..
The following line defines a pointer that point to a char buffer stored
in read-only memory:
char *pvs_name = "speedXX-pvsXX-vXX";
This pointer is meant to hold a template "speedXX-pvsXX-vXX" where the
XX values get overridden by the qcom_cpufreq_krait_name_version function. Since
the template is actually stored in read-only memory, when the function
executes the following call we get an oops:
snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d",
speed, pvs, pvs_ver);
To fix this issue, we instead store the template name onto the stack by
using the following syntax:
char pvs_name_buffer[] = "speedXX-pvsXX-vXX";
Because the `pvs_name` needs to be able to be assigned to NULL, the
template buffer is stored in the pvs_name_buffer and not under the
pvs_name variable. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix double free on tx path.
We see kernel crashes and lockups and KASAN errors related to ax210
firmware crashes. One of the KASAN dumps pointed at the tx path,
and it appears there is indeed a way to double-free an skb.
If iwl_mvm_tx_skb_sta returns non-zero, then the 'skb' sent into the
method will be freed. But, in case where we build TSO skb buffer,
the skb may also be freed in error case. So, return 0 in that particular
error case and do cleanup manually.
BUG: KASAN: use-after-free in __list_del_entry_valid+0x12/0x90
iwlwifi 0000:06:00.0: 0x00000000 | tsf hi
Read of size 8 at addr ffff88813cfa4ba0 by task btserver/9650
CPU: 4 PID: 9650 Comm: btserver Tainted: G W 5.19.8+ #5
iwlwifi 0000:06:00.0: 0x00000000 | time gp1
Hardware name: Default string Default string/SKYBAY, BIOS 5.12 02/19/2019
Call Trace:
<TASK>
dump_stack_lvl+0x55/0x6d
print_report.cold.12+0xf2/0x684
iwlwifi 0000:06:00.0: 0x1D0915A8 | time gp2
? __list_del_entry_valid+0x12/0x90
kasan_report+0x8b/0x180
iwlwifi 0000:06:00.0: 0x00000001 | uCode revision type
? __list_del_entry_valid+0x12/0x90
__list_del_entry_valid+0x12/0x90
iwlwifi 0000:06:00.0: 0x00000048 | uCode version major
tcp_update_skb_after_send+0x5d/0x170
__tcp_transmit_skb+0xb61/0x15c0
iwlwifi 0000:06:00.0: 0xDAA05125 | uCode version minor
? __tcp_select_window+0x490/0x490
iwlwifi 0000:06:00.0: 0x00000420 | hw version
? trace_kmalloc_node+0x29/0xd0
? __kmalloc_node_track_caller+0x12a/0x260
? memset+0x1f/0x40
? __build_skb_around+0x125/0x150
? __alloc_skb+0x1d4/0x220
? skb_zerocopy_clone+0x55/0x230
iwlwifi 0000:06:00.0: 0x00489002 | board version
? kmalloc_reserve+0x80/0x80
? rcu_read_lock_bh_held+0x60/0xb0
tcp_write_xmit+0x3f1/0x24d0
iwlwifi 0000:06:00.0: 0x034E001C | hcmd
? __check_object_size+0x180/0x350
iwlwifi 0000:06:00.0: 0x24020000 | isr0
tcp_sendmsg_locked+0x8a9/0x1520
iwlwifi 0000:06:00.0: 0x01400000 | isr1
? tcp_sendpage+0x50/0x50
iwlwifi 0000:06:00.0: 0x48F0000A | isr2
? lock_release+0xb9/0x400
? tcp_sendmsg+0x14/0x40
iwlwifi 0000:06:00.0: 0x00C3080C | isr3
? lock_downgrade+0x390/0x390
? do_raw_spin_lock+0x114/0x1d0
iwlwifi 0000:06:00.0: 0x00200000 | isr4
? rwlock_bug.part.2+0x50/0x50
iwlwifi 0000:06:00.0: 0x034A001C | last cmd Id
? rwlock_bug.part.2+0x50/0x50
? lockdep_hardirqs_on_prepare+0xe/0x200
iwlwifi 0000:06:00.0: 0x0000C2F0 | wait_event
? __local_bh_enable_ip+0x87/0xe0
? inet_send_prepare+0x220/0x220
iwlwifi 0000:06:00.0: 0x000000C4 | l2p_control
tcp_sendmsg+0x22/0x40
sock_sendmsg+0x5f/0x70
iwlwifi 0000:06:00.0: 0x00010034 | l2p_duration
__sys_sendto+0x19d/0x250
iwlwifi 0000:06:00.0: 0x00000007 | l2p_mhvalid
? __ia32_sys_getpeername+0x40/0x40
iwlwifi 0000:06:00.0: 0x00000000 | l2p_addr_match
? rcu_read_lock_held_common+0x12/0x50
? rcu_read_lock_sched_held+0x5a/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? rcu_read_lock_sched_held+0x5a/0xd0
? rcu_read_lock_sched_held+0x5a/0xd0
? lock_release+0xb9/0x400
? lock_downgrade+0x390/0x390
? ktime_get+0x64/0x130
? ktime_get+0x8d/0x130
? rcu_read_lock_held_common+0x12/0x50
? rcu_read_lock_sched_held+0x5a/0xd0
? rcu_read_lock_held_common+0x12/0x50
? rcu_read_lock_sched_held+0x5a/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? rcu_read_lock_bh_held+0xb0/0xb0
__x64_sys_sendto+0x6f/0x80
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f1d126e4531
Code: 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 35 80 0c 00 41 89 ca 8b 00 85 c0 75 1c 45 31 c9 45 31 c0 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 67 c3 66 0f 1f 44 00 00 55 48 83 ec 20 48 89
RSP: 002b:00007ffe21a679d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000000000000ffdc RCX: 00007f1d126e4531
RDX: 0000000000010000 RSI: 000000000374acf0 RDI: 0000000000000014
RBP: 00007ffe21a67ac0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
udf: Fix uninitialized array access for some pathnames
For filenames that begin with . and are between 2 and 5 characters long,
UDF charset conversion code would read uninitialized memory in the
output buffer. The only practical impact is that the name may be prepended a
"unification hash" when it is not actually needed but still it is good
to fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix race on port output
assume the following setup on a single machine:
1. An openvswitch instance with one bridge and default flows
2. two network namespaces "server" and "client"
3. two ovs interfaces "server" and "client" on the bridge
4. for each ovs interface a veth pair with a matching name and 32 rx and
tx queues
5. move the ends of the veth pairs to the respective network namespaces
6. assign ip addresses to each of the veth ends in the namespaces (needs
to be the same subnet)
7. start some http server on the server network namespace
8. test if a client in the client namespace can reach the http server
when following the actions below the host has a chance of getting a cpu
stuck in a infinite loop:
1. send a large amount of parallel requests to the http server (around
3000 curls should work)
2. in parallel delete the network namespace (do not delete interfaces or
stop the server, just kill the namespace)
there is a low chance that this will cause the below kernel cpu stuck
message. If this does not happen just retry.
Below there is also the output of bpftrace for the functions mentioned
in the output.
The series of events happening here is:
1. the network namespace is deleted calling
`unregister_netdevice_many_notify` somewhere in the process
2. this sets first `NETREG_UNREGISTERING` on both ends of the veth and
then runs `synchronize_net`
3. it then calls `call_netdevice_notifiers` with `NETDEV_UNREGISTER`
4. this is then handled by `dp_device_event` which calls
`ovs_netdev_detach_dev` (if a vport is found, which is the case for
the veth interface attached to ovs)
5. this removes the rx_handlers of the device but does not prevent
packages to be sent to the device
6. `dp_device_event` then queues the vport deletion to work in
background as a ovs_lock is needed that we do not hold in the
unregistration path
7. `unregister_netdevice_many_notify` continues to call
`netdev_unregister_kobject` which sets `real_num_tx_queues` to 0
8. port deletion continues (but details are not relevant for this issue)
9. at some future point the background task deletes the vport
If after 7. but before 9. a packet is send to the ovs vport (which is
not deleted at this point in time) which forwards it to the
`dev_queue_xmit` flow even though the device is unregistering.
In `skb_tx_hash` (which is called in the `dev_queue_xmit`) path there is
a while loop (if the packet has a rx_queue recorded) that is infinite if
`dev->real_num_tx_queues` is zero.
To prevent this from happening we update `do_output` to handle devices
without carrier the same as if the device is not found (which would
be the code path after 9. is done).
Additionally we now produce a warning in `skb_tx_hash` if we will hit
the infinite loop.
bpftrace (first word is function name):
__dev_queue_xmit server: real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1
netdev_core_pick_tx server: addr: 0xffff9f0a46d4a000 real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 2, reg_state: 1
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 6, reg_state: 2
ovs_netdev_detach_dev server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, reg_state: 2
netdev_rx_handler_unregister server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
netdev_rx_handler_unregister ret server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2
dp_
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Pointer may be dereferenced
Klocwork tool reported pointer 'rport' returned from call to function
fc_bsg_to_rport() may be NULL and will be dereferenced.
Add a fix to validate rport before dereferencing. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq25890: Fix external_power_changed race
bq25890_charger_external_power_changed() dereferences bq->charger,
which gets sets in bq25890_power_supply_init() like this:
bq->charger = devm_power_supply_register(bq->dev, &bq->desc, &psy_cfg);
As soon as devm_power_supply_register() has called device_add()
the external_power_changed callback can get called. So there is a window
where bq25890_charger_external_power_changed() may get called while
bq->charger has not been set yet leading to a NULL pointer dereference.
This race hits during boot sometimes on a Lenovo Yoga Book 1 yb1-x90f
when the cht_wcove_pwrsrc (extcon) power_supply is done with detecting
the connected charger-type which happens to exactly hit the small window:
BUG: kernel NULL pointer dereference, address: 0000000000000018
<snip>
RIP: 0010:__power_supply_is_supplied_by+0xb/0xb0
<snip>
Call Trace:
<TASK>
__power_supply_get_supplier_property+0x19/0x50
class_for_each_device+0xb1/0xe0
power_supply_get_property_from_supplier+0x2e/0x50
bq25890_charger_external_power_changed+0x38/0x1b0 [bq25890_charger]
__power_supply_changed_work+0x30/0x40
class_for_each_device+0xb1/0xe0
power_supply_changed_work+0x5f/0xe0
<snip>
Fixing this is easy. The external_power_changed callback gets passed
the power_supply which will eventually get stored in bq->charger,
so bq25890_charger_external_power_changed() can simply directly use
the passed in psy argument which is always valid. |
