Search vulnerabilities

Results 2,309

CVE-2023-53092

interconnect: exynos: fix node leak in probe PM QoS error path

In the Linux kernel, the following vulnerability has been resolved: interconnect: exynos: fix node leak in probe PM QoS error path Make sure to add the newly allocated interconnect node to the provider before adding the PM QoS request so that the node is freed on errors.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2023-53068

net: usb: lan78xx: Limit packet length to skb->len

In the Linux kernel, the following vulnerability has been resolved: net: usb: lan78xx: Limit packet length to skb->len Packet length retrieved from descriptor may be larger than the actual socket buffer length. In such case the cloned skb passed up the network stack will leak kernel memory contents. Additionally prevent integer underflow when size is less than ETH_FCS_LEN.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2025-37874

net: ngbe: fix memory leak in ngbe_probe() error path

In the Linux kernel, the following vulnerability has been resolved: net: ngbe: fix memory leak in ngbe_probe() error path When ngbe_sw_init() is called, memory is allocated for wx->rss_key in wx_init_rss_key(). However, in ngbe_probe() function, the subsequent error paths after ngbe_sw_init() don't free the rss_key. Fix that by freeing it in error path along with wx->mac_table. Also change the label to which execution jumps when ngbe_sw_init() fails, because otherwise, it could lead to a double free for rss_key, when the mac_table allocation fails in wx_sw_init().

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-37872

net: txgbe: fix memory leak in txgbe_probe() error path

In the Linux kernel, the following vulnerability has been resolved: net: txgbe: fix memory leak in txgbe_probe() error path When txgbe_sw_init() is called, memory is allocated for wx->rss_key in wx_init_rss_key(). However, in txgbe_probe() function, the subsequent error paths after txgbe_sw_init() don't free the rss_key. Fix that by freeing it in error path along with wx->mac_table. Also change the label to which execution jumps when txgbe_sw_init() fails, because otherwise, it could lead to a double free for rss_key, when the mac_table allocation fails in wx_sw_init().

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2023-53054

usb: dwc2: fix a devres leak in hw_enable upon suspend resume

In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: fix a devres leak in hw_enable upon suspend resume Each time the platform goes to low power, PM suspend / resume routines call: __dwc2_lowlevel_hw_enable -> devm_add_action_or_reset(). This adds a new devres each time. This may also happen at runtime, as dwc2_lowlevel_hw_enable() can be called from udc_start(). This can be seen with tracing: - echo 1 > /sys/kernel/debug/tracing/events/dev/devres_log/enable - go to low power - cat /sys/kernel/debug/tracing/trace A new "ADD" entry is found upon each low power cycle: ... devres_log: 49000000.usb-otg ADD 82a13bba devm_action_release (8 bytes) ... devres_log: 49000000.usb-otg ADD 49889daf devm_action_release (8 bytes) ... A second issue is addressed here: - regulator_bulk_enable() is called upon each PM cycle (suspend/resume). - regulator_bulk_disable() never gets called. So the reference count for these regulators constantly increase, by one upon each low power cycle, due to missing regulator_bulk_disable() call in __dwc2_lowlevel_hw_disable(). The original fix that introduced the devm_add_action_or_reset() call, fixed an issue during probe, that happens due to other errors in dwc2_driver_probe() -> dwc2_core_reset(). Then the probe fails without disabling regulators, when dr_mode == USB_DR_MODE_PERIPHERAL. Rather fix the error path: disable all the low level hardware in the error path, by using the "hsotg->ll_hw_enabled" flag. Checking dr_mode has been introduced to avoid a dual call to dwc2_lowlevel_hw_disable(). "ll_hw_enabled" should achieve the same (and is used currently in the remove() routine).

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2022-49914

btrfs: fix inode list leak during backref walking at resolve_indirect_refs()

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix inode list leak during backref walking at resolve_indirect_refs() During backref walking, at resolve_indirect_refs(), if we get an error we jump to the 'out' label and call ulist_free() on the 'parents' ulist, which frees all the elements in the ulist - however that does not free any inode lists that may be attached to elements, through the 'aux' field of a ulist node, so we end up leaking lists if we have any attached to the unodes. Fix this by calling free_leaf_list() instead of ulist_free() when we exit from resolve_indirect_refs(). The static function free_leaf_list() is moved up for this to be possible and it's slightly simplified by removing unnecessary code.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2022-49912

btrfs: fix ulist leaks in error paths of qgroup self tests

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix ulist leaks in error paths of qgroup self tests In the test_no_shared_qgroup() and test_multiple_refs() qgroup self tests, if we fail to add the tree ref, remove the extent item or remove the extent ref, we are returning from the test function without freeing the "old_roots" ulist that was allocated by the previous calls to btrfs_find_all_roots(). Fix that by calling ulist_free() before returning.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2022-49913

btrfs: fix inode list leak during backref walking at find_parent_nodes()

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix inode list leak during backref walking at find_parent_nodes() During backref walking, at find_parent_nodes(), if we are dealing with a data extent and we get an error while resolving the indirect backrefs, at resolve_indirect_refs(), or in the while loop that iterates over the refs in the direct refs rbtree, we end up leaking the inode lists attached to the direct refs we have in the direct refs rbtree that were not yet added to the refs ulist passed as argument to find_parent_nodes(). Since they were not yet added to the refs ulist and prelim_release() does not free the lists, on error the caller can only free the lists attached to the refs that were added to the refs ulist, all the remaining refs get their inode lists never freed, therefore leaking their memory. Fix this by having prelim_release() always free any attached inode list to each ref found in the rbtree, and have find_parent_nodes() set the ref's inode list to NULL once it transfers ownership of the inode list to a ref added to the refs ulist passed to find_parent_nodes().

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2023-53140

scsi: core: Remove the /proc/scsi/${proc_name} directory earlier

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Remove the /proc/scsi/${proc_name} directory earlier Remove the /proc/scsi/${proc_name} directory earlier to fix a race condition between unloading and reloading kernel modules. This fixes a bug introduced in 2009 by commit 77c019768f06 ("[SCSI] fix /proc memory leak in the SCSI core"). Fix the following kernel warning: proc_dir_entry 'scsi/scsi_debug' already registered WARNING: CPU: 19 PID: 27986 at fs/proc/generic.c:376 proc_register+0x27d/0x2e0 Call Trace: proc_mkdir+0xb5/0xe0 scsi_proc_hostdir_add+0xb5/0x170 scsi_host_alloc+0x683/0x6c0 sdebug_driver_probe+0x6b/0x2d0 [scsi_debug] really_probe+0x159/0x540 __driver_probe_device+0xdc/0x230 driver_probe_device+0x4f/0x120 __device_attach_driver+0xef/0x180 bus_for_each_drv+0xe5/0x130 __device_attach+0x127/0x290 device_initial_probe+0x17/0x20 bus_probe_device+0x110/0x130 device_add+0x673/0xc80 device_register+0x1e/0x30 sdebug_add_host_helper+0x1a7/0x3b0 [scsi_debug] scsi_debug_init+0x64f/0x1000 [scsi_debug] do_one_initcall+0xd7/0x470 do_init_module+0xe7/0x330 load_module+0x122a/0x12c0 __do_sys_finit_module+0x124/0x1a0 __x64_sys_finit_module+0x46/0x50 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-46784

lasso: Memory exhaustion in Entr'ouvert Lasso

A denial of service vulnerability exists in the lasso_node_init_from_message_with_format functionality of Entr&#39;ouvert Lasso 2.5.1. A specially crafted SAML response can lead to a memory depletion, resulting in denial of service. An attacker can send a malformed SAML response to trigger this vulnerability.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2022-49809

net/x25: Fix skb leak in x25_lapb_receive_frame()

In the Linux kernel, the following vulnerability has been resolved: net/x25: Fix skb leak in x25_lapb_receive_frame() x25_lapb_receive_frame() using skb_copy() to get a private copy of skb, the new skb should be freed in the undersized/fragmented skb error handling path. Otherwise there is a memory leak.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2022-49787

mmc: sdhci-pci: Fix possible memory leak caused by missing pci_dev_put()

In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-pci: Fix possible memory leak caused by missing pci_dev_put() pci_get_device() will increase the reference count for the returned pci_dev. We need to use pci_dev_put() to decrease the reference count before amd_probe() returns. There is no problem for the 'smbus_dev == NULL' branch because pci_dev_put() can also handle the NULL input parameter case.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2022-49777

Input: i8042 - fix leaking of platform device on module removal

In the Linux kernel, the following vulnerability has been resolved: Input: i8042 - fix leaking of platform device on module removal Avoid resetting the module-wide i8042_platform_device pointer in i8042_probe() or i8042_remove(), so that the device can be properly destroyed by i8042_exit() on module unload.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2022-49794

iio: adc: at91_adc: fix possible memory leak in at91_adc_allocate_trigger()

In the Linux kernel, the following vulnerability has been resolved: iio: adc: at91_adc: fix possible memory leak in at91_adc_allocate_trigger() If iio_trigger_register() returns error, it should call iio_trigger_free() to give up the reference that hold in iio_trigger_alloc(), so that it can call iio_trig_release() to free memory when the refcount hit to 0.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2022-49793

iio: trigger: sysfs: fix possible memory leak in iio_sysfs_trig_init()

In the Linux kernel, the following vulnerability has been resolved: iio: trigger: sysfs: fix possible memory leak in iio_sysfs_trig_init() dev_set_name() allocates memory for name, it need be freed when device_add() fails, call put_device() to give up the reference that hold in device_initialize(), so that it can be freed in kobject_cleanup() when the refcount hit to 0. Fault injection test can trigger this: unreferenced object 0xffff8e8340a7b4c0 (size 32): comm "modprobe", pid 243, jiffies 4294678145 (age 48.845s) hex dump (first 32 bytes): 69 69 6f 5f 73 79 73 66 73 5f 74 72 69 67 67 65 iio_sysfs_trigge 72 00 a7 40 83 8e ff ff 00 86 13 c4 f6 ee ff ff r..@............ backtrace: [<0000000074999de8>] __kmem_cache_alloc_node+0x1e9/0x360 [<00000000497fd30b>] __kmalloc_node_track_caller+0x44/0x1a0 [<000000003636c520>] kstrdup+0x2d/0x60 [<0000000032f84da2>] kobject_set_name_vargs+0x1e/0x90 [<0000000092efe493>] dev_set_name+0x4e/0x70

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2020-36790

nvmet: fix a memory leak

In the Linux kernel, the following vulnerability has been resolved: nvmet: fix a memory leak We forgot to free new_model_number

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-37764

drm/imagination: fix firmware memory leaks

In the Linux kernel, the following vulnerability has been resolved: drm/imagination: fix firmware memory leaks Free the memory used to hold the results of firmware image processing when the module is unloaded. Fix the related issue of the same memory being leaked if processing of the firmware image fails during module load. Ensure all firmware GEM objects are destroyed if firmware image processing fails. Fixes memory leaks on powervr module unload detected by Kmemleak: unreferenced object 0xffff000042e20000 (size 94208): comm "modprobe", pid 470, jiffies 4295277154 hex dump (first 32 bytes): 02 ae 7f ed bf 45 84 00 3c 5b 1f ed 9f 45 45 05 .....E..<[...EE. d5 4f 5d 14 6c 00 3d 23 30 d0 3a 4a 66 0e 48 c8 .O].l.=#0.:Jf.H. backtrace (crc dd329dec): kmemleak_alloc+0x30/0x40 ___kmalloc_large_node+0x140/0x188 __kmalloc_large_node_noprof+0x2c/0x13c __kmalloc_noprof+0x48/0x4c0 pvr_fw_init+0xaa4/0x1f50 [powervr] unreferenced object 0xffff000042d20000 (size 20480): comm "modprobe", pid 470, jiffies 4295277154 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 09 00 00 00 0b 00 00 00 ................ 00 00 00 00 00 00 00 00 07 00 00 00 08 00 00 00 ................ backtrace (crc 395b02e3): kmemleak_alloc+0x30/0x40 ___kmalloc_large_node+0x140/0x188 __kmalloc_large_node_noprof+0x2c/0x13c __kmalloc_noprof+0x48/0x4c0 pvr_fw_init+0xb0c/0x1f50 [powervr]

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-53020

Apache HTTP Server: HTTP/2 DoS by Memory Increase

Late Release of Memory after Effective Lifetime vulnerability in Apache HTTP Server. This issue affects Apache HTTP Server: from 2.4.17 up to 2.4.63. Users are recommended to upgrade to version 2.4.64, which fixes the issue.

CVSS 3.1 · 7.5 High EPSS 5.0% KEV · Not listed
Vendors
CVE-2024-24259

freeglut: memory leak via glutAddMenuEntry() function

freeglut through 3.4.0 was discovered to contain a memory leak via the menuEntry variable in the glutAddMenuEntry function.

CVSS 3.1 · 7.5 High EPSS 1.1% KEV · Not listed
Vendors