| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sysctl: move the "cad_pid" entry from pid_table[] to kern_reboot_table[]
cad_pid is global, and kill_cad_pid() is only used in the root namespace.
However, due to pid_table_root_permissions(), a non-root user can unshare
pid/user namespaces and modify it from the child namespace. This makes no
sense and is simply wrong.
Move it to kern_reboot_table[] where it logically belongs; this ensures
that only GLOBAL_ROOT_UID can read/modify this sysctl.
Note that this patch doesn't preserve "#ifdef CONFIG_PROC_SYSCTL" around
the "cad_pid"; CONFIG_PROC_SYSCTL selects CONFIG_SYSCTL, so it is always
set when kern_reboot_table[] is compiled. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in oplock break notification
smb2_oplock_break_noti() reads opinfo->conn without any lock and
dereferences it after two allocations which may sleep. When the
durable handle owning the oplock is disconnected, session_fd_check()
clears opinfo->conn and drops its conn reference under ci->m_lock, and
the last ksmbd_conn_put() frees the connection. A break triggered by
another connection that races with the teardown can then resurrect the
freed connection: ksmbd_conn_get() is a plain atomic_inc, and the
queued break work later dereferences the stale conn via
ksmbd_conn_write(), a use-after-free reachable by any authenticated
client holding a durable batch oplock.
Thread the caller's inode into the notification path instead of taking
a new reference on it. Every caller of oplock_break() already holds a
live ksmbd_file (or an explicit ksmbd_inode_lookup_lock() reference,
in the parent lease break paths) on the inode that owns the break
target's oplock list, so ci cannot be freed during the call, and its
lock can be taken without dereferencing opinfo->o_fp, which a
concurrent close may free. Select and pin the connection under
ci->m_lock, the same lock session_fd_check() and
ksmbd_reopen_durable_fd() use to update opinfo->conn, so a concurrent
detach either loses the race to the clear or keeps the connection
alive until the notification work releases it. Transfer the reference
to the work item and release it on allocation failures. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix out-of-bounds access in writeback_store()
Patch series "zram: fix stale scan bounds after reinitialization".
Both writeback_store() and read_block_state() derive their table scan
bounds from zram->disksize before acquiring dev_lock. If the device is
reset and reinitialized with a smaller disksize between that read and lock
acquisition, the bound can describe the old table while the scan operates
on the new one. This can lead to out-of-bounds slot accesses.
Move both bound calculations under dev_lock so each bound remains
consistent with the table throughout its scan. Keep the fixes separate
because the affected interfaces originate from different commits and can
be backported independently.
This patch (of 2):
writeback_store() calculates the table scan bounds before taking dev_lock.
A reset followed by reconfiguration with a smaller disksize can therefore
replace zram->table while writeback_store() is waiting for the lock. Once
it acquires the lock, it sees an initialized device but scans the new
table using the old upper bound, resulting in an out-of-bounds access.
Calculate the number of pages while holding dev_lock so the scan bound
matches the table protected by the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reject connection when transport allocation fails
handle_connect_req() returns without action when
svc_rdma_create_xprt() fails to allocate the new transport.
The CM core returns 0 for CONNECT_REQUEST events, so it does
not destroy the new rdma_cm_id. Each allocation failure under
memory pressure leaks one rdma_cm_id, and a remote peer driving
connection attempts can amplify this.
Reject the connection by returning a non-zero status from the
CM event handler, which tells the CM core to destroy the
orphaned cm_id. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: corsair-void: Check size of status and firmware events before reading them
Malformed status and firmware events could cause an out-of-bounds read since
the size wasn't being checked. Check the size and warn on unexpected values to
avoid this. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: imx: serialize imx_uart_ports[] lifetime
imx_uart_probe() publishes its devm-allocated port in imx_uart_ports[]
before uart_add_one_port() because console setup uses the table. The entry
is not cleared when adding the port fails or after removal, leaving a
dangling pointer.
A sibling probe can register the shared console through that stale entry.
This was reproduced under KASAN on QEMU mcimx6ul-evk by unbinding a
sibling UART, unbinding the console UART and rebinding the sibling.
Keep the entry valid through uart_remove_one_port(), then clear it. Protect
port addition and removal together with their table updates so sibling
operations cannot interleave. Reject an occupied slot rather than
clobbering an active port during a duplicate-line probe. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: reject out-of-range nseconds in NFSv3 SETATTR and create ops
A client can send an NFSv3 SETATTR, CREATE, MKDIR, SYMLINK or MKNOD
carrying an atime or mtime whose nseconds field is out of range. The
value is well-formed on the wire and decodes cleanly into a valid
uint32, but it is not a valid timespec64: tv_nsec must be less than
NSEC_PER_SEC.
Nothing in the setattr path clamps it. notify_change() runs the time
through timestamp_truncate(), which does not reduce tv_nsec below
NSEC_PER_SEC when the filesystem supports nanosecond granularity
(s_time_gran == 1), and the inode atime/mtime setters store it verbatim
(only ctime is normalized, via inode_set_ctime_to_ts()). The
un-normalized value then corrupts on-disk metadata: ext4's
ext4_encode_extra_time() shifts tv_nsec left by EXT4_EPOCH_BITS, which
overflows the 32-bit extra field and clobbers the seconds-epoch bits, so
the stored seconds (and thus the year) are wrong on read-back. XFS with
bigtime mis-stores the timestamp for the same reason.
Validate the client-supplied atime/mtime in the proc handlers and return
NFS3ERR_INVAL before anything is changed. RFC 1813 lists NFS3ERR_INVAL
for SETATTR and describes it as the error for a value the server 'can
not store ... in its own representation'; the client maps it to EINVAL.
Checking in the proc handlers, rather than in nfsd_setattr(), keeps the
rejection in front of object creation. The create operations create the
object before nfsd_create_setattr() runs, so a late failure would leave
the new object behind and turn a non-idempotent request into a namespace
change that reports failure. The check is therefore done up front, for
the create operations before the object is created.
tv_nsec is a long, so the comparison casts it to unsigned long (the same
width) rather than to u32, matching timespec64_valid(). A u32 cast would
truncate on 64-bit; the unsigned long cast also rejects a value that
became negative when an out-of-range u32 wire nseconds was assigned to a
32-bit long.
Only client-supplied times are checked: SET_TO_SERVER_TIME requests
carry no client value. The sattrguard3 ctime is deliberately left alone:
an out-of-range guard simply never matches the object's ctime and yields
NFS3ERR_NOT_SYNC via the existing guardtime comparison, which is the
protocol-correct outcome rather than rejecting the request. |
| In the Linux kernel, the following vulnerability has been resolved:
acpi/apei/ghes: Use raw_spinlock_t for CXL CPER work locks
The CXL CPER work registration and unregistration helpers acquire
cxl_cper_work_lock and cxl_cper_prot_err_work_lock with a spinlock
guard(), which leaves local interrupts enabled. The corresponding post
paths (cxl_cper_post_event(), cxl_cper_post_prot_err()) execute in hard
IRQ context (they are called from the GHES error notification path) and
acquire the same locks with an irqsave guard().
If a CPU is holding one of these locks via a spinlock guard() when a GHES
interrupt arrives on the same CPU, the IRQ handler spins on the held lock
waiting for it to release, while the lock holder is preempted by the IRQ.
The result is a deadlock.
Convert both locks from spinlock_t to raw_spinlock_t and use guard() at
all call sites. On PREEMPT_RT kernels spinlock_t is backed by rt_mutex and
sleeping from hard IRQ context is not permitted; raw_spinlock_t is safe in
both contexts.
Add WARN_ONCE to both register functions to surface double-registration
bugs at runtime.
Restructure both unregister functions to clear the global work pointer
under the lock before calling cancel_work_sync(), closing the window
where a CPER interrupt could schedule work on a pointer about to be
freed. Add kfifo_reset() after cancel_work_sync() so stale entries
are not replayed on next module load.
Both kfifos are single-consumer: only one work_struct is registered at
a time, enforced by the WARN_ONCE guard in the register functions.
kfifo_reset() is safe outside the lock because cancel_work_sync() has
already quiesced the consumer, and no new consumer can register until
the current module exit completes and a fresh module init runs.
Remove the redundant cancel_work_sync() call from cxl_ras_exit() and
cxl_pci_driver_exit(). The CPER unregister functions now quiesce
the work internally. |
| In the Linux kernel, the following vulnerability has been resolved:
debugfs: Fix lockdown check for mmap_prepare
Commit 651fdda8406d ("relay: update relay to use mmap_prepare")
changed the `mmap` file operation to `mmap_prepare` for relayfs, but
the lockdown check in debugfs was not updated accordingly.
This prevents debugfs from being locked down when the kernel is in
integrity mode if a file uses `mmap_prepare` but not `mmap`.
Since the conversion to `mmap_prepare` across the kernel is not yet
complete, update the lockdown check to look for both `mmap` and
`mmap_prepare` to ensure comprehensive coverage. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/kmemleak: avoid soft lockup when scanning task stacks
Patch series "mm/kmemleak: avoid soft lockup when scanning task", v3.
kmemleak_scan() scans every task stack under one rcu_read_lock() with no
reschedule point, which can trip the soft lockup watchdog on hosts with
very many threads.
That prints the following message, depending on the workload+host
configuration:
watchdog: BUG: soft lockup - CPU#35 stuck for 22s! [kmemleak:537]
scan_block
kmemleak_scan
kmemleak_scan_thread
kthread
Patch 1 walks the tasks with find_ge_pid() so the scan reschedules between
tasks
Patches 2-3 let the scan loops stop early once a scan is interrupted.
This patch (of 3):
kmemleak_scan() walks every thread and scans its kernel stack under a
single rcu_read_lock() with no reschedule point. On a host with very many
threads -- amplified by KASAN/lockdep in debug builds -- this loop can hog
a CPU long enough to trip the soft lockup watchdog:
watchdog: BUG: soft lockup - CPU#35 stuck for 22s! [kmemleak:537]
scan_block
kmemleak_scan
kmemleak_scan_thread
kthread
A cond_resched() cannot be added directly: the loop runs inside an RCU
read-side critical section.
Walk the tasks one PID at a time with find_ge_pid(), taking the RCU read
lock only to look up and pin each task. The stack is then scanned with no
lock held, so cond_resched() runs between tasks and the scan stops early
on scan_should_stop(). This follows the next_tgid()/task_seq_get_next()
iteration pattern and keeps each RCU critical section short. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: fnic: Use GFP_ATOMIC for VLAN alloc under spinlock
fnic_fcoe_process_vlan_resp() allocates a VLAN descriptor with
kzalloc_obj() (default GFP_KERNEL) while holding vlans_lock via
spin_lock_irqsave(). GFP_KERNEL may sleep, which is not allowed in this
atomic context and can trigger a sleeping-from-invalid-context warning
or deadlock.
Pass GFP_ATOMIC so the allocation is safe under the IRQ-safe spinlock. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: validate sockaddr length per family in listener_set
nfsd_sock_nl_policy declares NFSD_A_SOCK_ADDR as a bare NLA_BINARY
attribute with no minimum length. A CAP_NET_ADMIN caller can send a
16-byte NFSD_A_SOCK_ADDR with sa_family=AF_INET6, causing a 12-byte
OOB read across three consumers (rpc_cmp_addr_port, svc_find_listener,
kernel_bind).
nfsd_nl_listener_set_doit() also parsed and validated each listener
entry inline in two separate loops, interleaved with mutating the
running listener configuration. The validation was duplicated, used an
open-coded "nla_len < sizeof(struct sockaddr)" check that was too short
for AF_INET6, and handled a malformed entry inconsistently depending on
which loop noticed it.
Add an nfsd_nl_validate_listeners() helper that walks the entire list
once and confirms each entry parses, carries both an address and a
transport name, and is long enough for its address family
(sizeof(struct sockaddr_in) for AF_INET, sizeof(struct sockaddr_in6)
for AF_INET6, -EAFNOSUPPORT otherwise). Call it before taking
nfsd_mutex or creating the serv, so a malformed request fails cleanly
with no side effects.
Since every entry is known valid by the time the two existing loops
run, drop the redundant presence and per-family length checks from
both, leaving only the nla_parse_nested() call needed to extract the
data. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: validate deflate params
We must validate user-supplied deflate winbits before we pass it to
zlib_deflate_workspacesize(), which triggers BUG_ON() if winbits value is
outside of valid ranges. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: GICv2: Don't WARN on out-of-range GICV_DIR INTID
vgic_v2_deactivate() passes the INTID a guest wrote to GICV_DIR straight
to vgic_get_vcpu_irq(), and treats a failed lookup as a "can't happen"
condition with WARN_ON_ONCE().
The guest can make it happen at will, though: for any INTID outside of
the implemented SGI, PPI and SPI ranges the lookup returns NULL, since
GICv2 has no LPIs. A guest running with EOImode==1 writing such an INTID
to GICV_DIR triggers the WARN, and panics hosts running with
panic_on_warn.
Drop the WARN and ignore failed lookups. |
| In the Linux kernel, the following vulnerability has been resolved:
module: validate string table section types
In elf_validity_cache_sechdrs, section sizes and offsets are validated,
unless the section type is SHT_NULL or SHT_NOBITS.
Later, elf_validity_cache_secstrings and elf_validity_cache_index_str
access the section name table (.shstrtab) and symbol string table
(.strtab) headers without first ensuring that their types are
SHT_STRTAB. If a section type is SHT_NULL or SHT_NOBITS, sh_offset has
not been validated and may reference out-of-bounds memory when
dereferenced in elf_validity_cache_secstrings or
elf_validity_cache_strtab.
Validate that both string section headers are of type SHT_STRTAB before
caching them. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS/localio: fix ref leak on nfs_uuid_add_file failure
When nfs_uuid_add_file() races with nfs_uuid_put() tearing down
uuid->net, it returns -ENXIO without publishing nfl->nfs_uuid via
rcu_assign_pointer(). nfs_open_local_fh() then enters its error
branch and only releases the slot's file ref and its paired net
ref plus its own entry-time net ref, while the close path is a
no-op:
nfs_close_local_fh()
nfs_uuid = rcu_dereference(nfl->nfs_uuid);
if (!nfs_uuid) { rcu_read_unlock(); return; } /* always */
nfsd_open_local_fh() returns localio holding a caller-owned +1
nfsd_file reference (from nfsd_file_get() after
nfsd_file_acquire_local()) and an entry-time nfsd_net reference
(from its first nfsd_net_try_get()) embedded as nf->nf_net. Both
are leaked on the failure path, pinning one nfsd_file (and the
underlying struct file, dentry, inode) and one nfsd_net_ref per
occurrence, which blocks nfsd_net and netns teardown.
Fix by releasing the caller-owned file ref and its net ref through
the existing helper, using a stack-local RCU pointer so the helper
can xchg it out, then returning -ENXIO so callers do not
dereference a localio whose slot has been cleared:
struct nfsd_file __rcu *tmp = RCU_INITIALIZER(localio);
nfs_to_nfsd_file_put_local(pnf);
nfs_to_nfsd_file_put_local(&tmp);
localio = ERR_PTR(-ENXIO);
The trailing nfs_to_nfsd_net_put(net) continues to release the
outer net ref, so all three nfsd_net_try_get() increments are
balanced on the error branch. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: don't free integrity payload that doesn't exist
fs_bio_integrity_alloc might not allocate a bio integrity payload if PI
verification is disabled on the block device. Check for that case before
calling fs_bio_integrity_free in iomap_bio_read_folio_range_sync to
avoid a NULL pointer dereferences.
Make the branch cover the PI verification as well - while
fs_bio_integrity_verify works without an integrity payload, it requires
one to actually do useful work. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: renesas: Fix out-of-bounds access for newdevs mask
When software initiates DAA (Dynamic Address Assignment), the controller
reports the result via the NRSPQP (Normal Response Queue Port Register).
The data length field of the response descriptor, which is accessible
through the NRSPQP register, indicates the number of devices remaining
after DAA. Consequently, when the bus is empty, this field contains the
maximum number of devices supported by the controller (8 for the Renesas
I3C controller).
Adjust the condition that computes the newly discovered devices bitmask
to prevent an out-of-bounds when the I3C bus is empty. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: uvc: Fix null pointer dereference in uvcg_video_init()
In uvcg_video_init(), if kthread_run_worker() fails,
the error logged uses uvcg_err(), however, the pointer it uses:
video->uvc is not assigned at this point, triggering a null
pointer dereference. Fix this by directly using uvc->func which
is assigned already. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: Do not WARN on remotely-controlled oversized SGL allocations
When fuzzing the nvme target code, I tripped a kernel warning in
nvmet_tcp_map_data() because the length passed into the allocator is
controlled by the remote initiator.
A remote initiator that sends a command with an SGL claiming a huge
number, can create a scatterlist and iovec allocation of over 1 million
entries, which causes the backing kmalloc call to exceed MAX_PAGE_ORDER
and then the page allocator will trip on a WARN_ON_ONCE_GFP() message:
WARNING: mm/page_alloc.c:5280 __alloc_frozen_pages_noprof
Workqueue: nvmet_tcp_wq nvmet_tcp_io_work
...
sgl_alloc_order
nvmet_tcp_map_data
nvmet_tcp_try_recv_pdu
As it's never good to trip a kernel warning remotely due to many systems
having panic-on-warn enabled, let's silence it by just add GFP_NOWARN to
the allocation flags. |
