| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Skip vport under deletion in report ID acquisition
qla24xx_report_id_acquisition() format-1 handling walks ha->vp_list under
vport_slock, takes a vref_count on the matching vport and calls
qla_update_host_map() to register its port id.
A vport teardown via qla24xx_vport_delete() sets VPORT_DELETE, then
qla24xx_disable_vp() removes the vport from the host_map btree and zeroes
vha->d_id (RESET_AL_PA). The vport is only unlinked from vp_list later,
in qla24xx_deallocate_vp_id(), which clears vp_map[idx] (RESET_VP_IDX)
but does not touch host_map. In the window in between, report ID
acquisition can still find the vport on vp_list and call
qla_update_host_map(); with d_id already zeroed it takes the
btree_insert32() path and re-inserts the dying vport into host_map.
Nothing cleans that entry afterwards, so once scsi_host_put() frees the
vha a later host_map lookup dereferences freed memory.
Skip a vport that has VPORT_DELETE set before taking the reference, so it
is neither re-registered nor scheduled for DPC re-registration. This
mirrors the existing guard in qla2x00_alert_all_vps(). |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: reject dynamic fdb entries that reference a nexthop id
The commit cited in the Fixes tag allowed VXLAN FDB entries to point to
FDB nexthops so that overlay traffic could be load balanced across
multiple VTEPs. Such entries can only be configured from user space,
cannot be learned and cannot roam. They only make sense with a user space
control plane such as E-VPN where data plane learning is disabled.
Despite that, the VXLAN driver does not currently prevent such entries
from being configured with the "dynamic" flag. The per-nexthop FDB list
is only protected by the per-device hash lock, which is not sufficient
when two VXLAN devices point to the same FDB nexthop and therefore share
the list. Aging runs in softirq context without RTNL, so an entry deleted
by one device can race with an addition or deletion from the other,
leading to list corruption:
list_del corruption. next->prev should be ffff8881069d9548, but was
dead000000000122. (next=ffff8881069d9448)
WARNING: CPU: 0 PID: 90 at lib/list_debug.c:65
__list_del_entry_valid_or_report+0x1aa/0x210
...
vxlan_fdb_destroy+0x5b8/0xad0
vxlan_cleanup+0x328/0x450
call_timer_fn+0x2a/0x1c0
run_timer_softirq+0x18c/0x210
BUG: KASAN: slab-use-after-free in vxlan_fdb_destroy
Fix this by rejecting the bogus configuration of dynamic FDB entries that
point to FDB nexthops, both when created and when an existing entry is
updated. As such, the per-nexthop FDB list is only ever mutated under the
RTNL lock. Add test cases to make sure that this does not regress in the
future. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ism: folio_put() after error
dmb->cpu_addr was allocated via folio_alloc(). Use folio_put() instead of
kfree() in the error exit of ism_alloc_dmb() to avoid slab allocator
corruption.
While at it, reset dmb->cpu_addr after folio_put to avoid unintentional UAF
by future callers. |
| In the Linux kernel, the following vulnerability has been resolved:
mac802154: fix use-after-free of sdata via queued RX frames
The RX softirq producer ieee802154_subif_frame() queues received beacon
and MAC-command frames onto local->rx_beacon_list / rx_mac_cmd_list and
schedules a process-context worker, storing a raw mac_pkt->sdata (and
skb->dev == sdata->dev) with neither a reference nor any locking:
- the lists have no lock: the softirq producer list_add_tail()s while the
mac_wq worker list_del()s, so sibling interfaces on the same phy corrupt
the list;
- the workers dereference the interface after it may have been freed.
mac802154_rx_mac_cmd_worker() touches mac_pkt->sdata directly, and
mac802154_rx_beacon_worker() -> mac802154_process_beacon() dereferences
skb->dev (== sdata->dev). Removing an interface frees its sdata
(netdev_priv) while a queued frame still points at it, so a later worker
run is a use-after-free.
Reproduced under KASAN by flooding a victim interface with MAC command
frames and removing it (the beacon path is the same class via skb->dev):
BUG: KASAN: slab-use-after-free in mac802154_rx_mac_cmd_worker+0x463/0x630 [mac802154]
Read of size 4 at addr ffff888002f9ea18 by task kworker/u8:1/31
Workqueue: phy0-mac-cmds mac802154_rx_mac_cmd_worker [mac802154]
Call Trace:
mac802154_rx_mac_cmd_worker+0x463/0x630 [mac802154]
process_one_work+0x611/0xe80
worker_thread+0x52e/0xdc0
kthread+0x30c/0x630
ret_from_fork+0x2fd/0x3e0
Fix both lists together:
- add local->rx_lock and take it around every list access: the softirq
producer (plain spin_lock, softirq context) and the workers and flush
(spin_lock_bh, process context);
- pin the interface for the lifetime of a queued frame with
netdev_hold()/netdev_put(), so the worker can safely dereference sdata /
skb->dev even while the interface is being removed;
- dequeue under the lock at the head and loop-drain the whole list in the
workers (they previously processed one frame per run and relied on a
later enqueue to drain the rest);
- drop not-yet-started frames of an interface before it is unregistered,
from ieee802154_if_remove() (after the RCU grace period) and from the
ieee802154_remove_interfaces() loop -- the latter is the whole-phy
teardown path, which does not go through ieee802154_if_remove().
An in-flight worker that already dequeued a frame keeps its own netdev
reference; unregister_netdevice() then waits it out in netdev_run_todo(),
which runs at rtnl_unlock() (rtnl released) and after the interface has
been closed, so it does not pin rtnl. A worker blocked in an association
TX only delays that one interface's unregister (the usual "waiting for %s
to become free"), it does not hold rtnl. netdev_hold() is used for this
reason instead of a cancel_work_sync() under rtnl, which would block on
the worker's unbounded MLME TX wait via ieee802154_sync_queue().
The mac-command worker additionally skips processing for a stopped
interface (ieee802154_sdata_running()), avoiding a needless association
response during teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/pat: Allocate split page tables as kernel page tables
A PTE is allocated directly without going through the standard page table
allocation routines (such as pte_alloc_one_kernel()) when the CPA code
splits a large page (__split_large_page()).
This means the page table constructor is never called nor is the page table
marked as a kernel page table.
The former results in the folio associated with the page table not being
marked as a page table (__pagetable_ctor() is never called thus neither is
__folio_set_pgtable()) nor are statistics updated to reflect
it (lruvec_stat_add_folio() is never called).
The latter issue of failing to mark the page table as a kernel page
table (ptdesc_set_kernel() is never called) is far more problematic.
Since commit:
5ba2f0a15564 ("mm: introduce deferred freeing for kernel page tables")
kernel page table freeing has been batched and since the
subsequent commit:
e37d5a2d60a3 ("iommu/sva: invalidate stale IOTLB entries for kernel address space")
IOTLB cache entries for kernel page tables have been invalidated upon
being freed.
Since split page tables are freed without this invalidation, the IOTLB
can contain stale entries for them.
Resolve the issue by using the ordinary PTE allocation API at split time.
This results in these kernel page tables invoking a page table constructor,
and thus requires a page table destructor.
Destructors are not always present, like for early allocated direct map
page tables). Conditionally call pagetable_dtor_free() if the PG_table
folio flag for the ptdesc is set, otherwise we free the page table via
pagetable_free().
Regardless of which path is taken page tables marked as kernel page tables,
which now includes split page tables, take the correct route through
pagetable_free_kernel().
There is a user-visible side effect in that split page tables will appear
in nr_page_table_pages in /proc/vmstat (as do other kernel page tables
allocated after early boot), however this is a positive change.
This issue started being markedly problematic after commit:
5ba2f0a15564 ("mm: introduce deferred freeing for kernel page tables")
so choose this as the Fixes target.
[ dhansen: rephrase in imperative mood ] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS reject error
qla_nvme_xmt_ls_rsp() obtains uctx, which was linked into
fcport->unsol_ctx_head by qla2xxx_process_purls_iocb() and is still linked
when the NVMe transport calls back to transmit the LS response. On the
error (out:) path the function frees uctx with kfree() but never removes
it from the list. This leaves a freed node in fcport->unsol_ctx_head: the
next list_add_tail() for that fcport writes through the freed node, and a
subsequent list_del() can corrupt the list or panic.
Unlink uctx with list_del() before kfree() on the error path, matching the
other free sites in qla_nvme_release_lsrsp_cmd_kref() and
qla2xxx_process_purls_pkt(). qla2x00_rel_sp() in the failure path only
returns the SRB to its pool and does not invoke sp->put_fn, so the out:
path is the sole free and uctx is always still linked there. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix use-after-free of qpair work on queue teardown
The response queue MSI-X handler qla2xxx_msix_rsp_q() schedules
qla_do_work() via queue_work(ha->wq, &qpair->q_work). qla_do_work()
dereferences the qpair (vha, rsp) and takes qpair->qp_lock.
During teardown, qla2xxx_delete_qpair() deletes the response queue, which
calls free_irq() in qla25xx_free_rsp_que(), and then frees the queue and
the qpair. free_irq() waits for running hardirq handlers but does not
cancel work already placed on ha->wq. A still-pending q_work then runs
qla_do_work() against the freed qpair and response queue, causing a
use-after-free. This is especially likely during full adapter teardown,
where destroy_workqueue(ha->wq) forces pending work to run after the queue
pairs have been freed.
Flush the work item with cancel_work_sync() in qla25xx_free_rsp_que()
after free_irq() has released the interrupt (so no new work can be
queued) and before the response queue and qpair memory are freed (so the
flushed handler still sees valid memory). Guard on rsp->qpair and ha->wq
to match the INIT_WORK() condition and avoid operating on an
uninitialized work_struct. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: safely drain sessions during logoff
SMB3 multichannel allows requests for one session to run on multiple
connections. Wait for all channels bound to a session before freeing
shared session objects.
A deferred byte-range lock remains counted as a running request and only
wakes when its file closes. Wake blocked locks during the drain without
unpublishing or modifying their file objects. Synchronous CANCEL requests
must invoke their cancellation callback to wake pending operations, while
CHANGE_NOTIFY completion remains specific to the asynchronous path.
Serialize session teardown with channel registration and previous-session
cleanup, and use atomic work-state transitions so LOGOFF, CANCEL, and
connection teardown invoke cancellation callbacks only once. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: mdb: Fix use-after-free in vxlan_mdb_remote_src_del()
vxlan_mdb_is_valid_source(), which validates MDBE_ATTR_SOURCE and every
MDBE_ATTR_SRC_LIST member, accepts the all-zeros address.
A source list is only accepted on a (*, G) entry, whose source is the
all-zeros address, and for each member of the list an (S, G) entry is
derived from it by substituting the source. Entries are keyed by a plain
memcmp() of struct vxlan_mdb_entry_key, so if MDBE_ATTR_SOURCE is present
and holds the all-zeros address and the source list holds it as well, the
derived (S, G) key is byte-identical to the (*, G) key and resolves to the
same entry. Omitting MDBE_ATTR_SOURCE is not equivalent, as the key is
then left with a zero address family.
vxlan_mdb_remote_src_del() removes the forwarding entry of a source before
freeing the source entry:
vxlan_mdb_remote_src_fwd_del(vxlan, group, remote, &ent->addr);
vxlan_mdb_remote_src_entry_del(ent);
With the keys aliased, the first call deletes the remote of the entry that
owns 'ent' instead of a separate (S, G) entry, and frees 'ent'. The second
call then runs on the freed entry, and its hlist_del() reads ->pprev and
->next out of it and writes through them.
Adding the (*, G) entry with NLM_F_REPLACE and no source list marks the
all-zeros source for deletion and reaches this from the sweep at the end
of vxlan_mdb_remote_srcs_replace().
BUG: KASAN: slab-use-after-free in __vxlan_mdb_add+0x1cd/0xd70
Read of size 8 at addr ffff888102852500 by task poc/84
__vxlan_mdb_add+0x1cd/0xd70
vxlan_mdb_add+0xc0/0x140
rtnl_mdb_add+0x157/0x2a0
rtnetlink_rcv_msg+0x207/0x5a0
Allocated by task 84:
__kmalloc_cache_noprof+0x153/0x360
vxlan_mdb_remote_srcs_add+0x2eb/0x440
__vxlan_mdb_add+0x803/0xd70
Freed by task 84:
kfree+0x14c/0x3b0
vxlan_mdb_remote_del+0x129/0x1a0
__vxlan_mdb_del+0x4f/0xe0
vxlan_mdb_remote_src_fwd_del.isra.0+0x162/0x1b0
__vxlan_mdb_add+0x1c5/0xd70
The MDB operations are netns-scoped, so an unprivileged user can perform
them in a new user and network namespace.
Reject the all-zeros address in vxlan_mdb_is_valid_source(), which covers
both call sites. A (*, G) entry is expressed by omitting the source, so
nothing legitimate is refused.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix incorrect free in candidate cleanup in afs_lookup_server()
Fix afs_lookup_server() to not free an existing server's endpoint state
when cleaning up a candidate server. The candidate record doesn't have an
endpoint state yet at this point, so the free for that can just be removed. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix fib6 walker UAF on seq stop
ipv6_route_iter_active() treats a walker in FWS_U at the table root as
already unlinked. fib6_del_route() can move a still-linked walker into
that same state when the current leaf is the last route at the root,
so ipv6_route_native_seq_stop() skips fib6_walker_unlink(). The seq
private object can then be freed while it remains on
net->ipv6.fib6_walkers. A later route deletion walks the dangling list
and uses the freed walker.
Use the list head as membership state and reinitialize it when
unlinking. Keep the existing w->node check so a never-started iterator
with a zeroed private object is not treated as linked.
The same stop helper is used by /proc/net/ipv6_route and by the BPF
ipv6_route iterator. The BPF show path only widens the race. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix a TOCTOU race in SCTP_CMD_TIMER_START
The SCTP_CMD_TIMER_START handler checks timer_pending() before calling
timer_reduce(). The timer can expire and detach between these operations,
causing timer_reduce() to rearm the timer without taking the association
reference required for the newly armed timer.
The timer callback later unconditionally drops its association reference,
which can leave the association reference count unbalanced and result in
use-after-free during association teardown.
Use the return value of timer_reduce() to determine whether the timer was
actually armed. Take the association reference only when timer_reduce()
successfully starts a new timer, closing the race between checking the
timer state and rearming it.
This issue was reported by Nico Yip (@_cyeaa_) working with TrendAI Zero
Day Initiative. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/srpt: Fix srpt_alloc_rw_ctxs() unwind counters
When srpt_alloc_rw_ctxs() fails partway through a multi-buffer indirect
descriptor, the unwind path destroys RDMA contexts but leaves stale
n_rw_ctx and n_rdma values (and a dangling rw_ctxs pointer). Later
sq_wr_avail accounting in srpt_queue_response() or srpt_write_pending()
can then subtract the wrong number of send queue credits.
Reset the counters and clear rw_ctxs after freeing the heap
allocation before returning an error. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Don't free the live ring's TPA state on queue restart failure
bnxt_queue_mem_alloc() shallow copies the live RX ring into the clone:
memcpy(clone, rxr, sizeof(*rxr));
the code currently clears pointers that the clone owns (such as
rx_agg_bmap), but rx_tpa and rx_tpa_idx_map are left pointing at memory
of the live ring that was cloned.
If an allocation failure happens later and the err_free_tpa_info label
is taken, the live ring's memory can be freed while still in use.
Fix this by initializing the clone's pointers to NULL to prevent live
ring state from being freed inadvertently. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (gpio-fan) Fix use-after-free in alarm work
fan_alarm_irq_handler() queues fan_data->alarm_work, but nothing
cancels it. fan_alarm_notify() dereferences fan_data and its hwmon
device. On unbind, devres frees the interrupt, which only waits for
the handler itself, and then releases the hwmon device and fan_data,
so a pending fan_alarm_notify() can run after those frees.
Replace INIT_WORK() with devm_work_autocancel(), registered before
devm_request_irq(). The devres cleanup then frees the interrupt
first, so no new work can be queued, and cancels the work while
fan_data and the hwmon device are still alive.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Clear stale peer app data after address list changes
afs_fs_probe_fileserver() fetches the current endpoint state under
server->fs_lock, but leaves old_alist as NULL. Consequently,
afs_set_peer_appdata() treats every address list replacement as initial
setup and only binds the new peers; it never unbinds peers removed from
the old list.
An address refresh can therefore proceed as follows. CPU 0 replaces
server S's list and drops Pold without clearing Pold->app_data. The
server destroyer then clears only S's current peers and lets S reach its
RCU callback. After the callback frees S, CPU 1 handles a callback
through an RxRPC connection that still pins Pold, reads Pold->app_data,
and calls afs_use_server() on the freed object.
KASAN reported:
BUG: KASAN: slab-use-after-free in afs_find_server+0x3c/0xa0
Read of size 4 at addr ffff8881013e1af0 by task krxrpcio/7001/74
Call Trace:
afs_find_server+0x3c/0xa0
afs_rx_new_call+0x15c/0x390
rxrpc_new_incoming_call+0x97c/0x1730
rxrpc_input_packet.constprop.0+0xd03/0xec0
rxrpc_io_thread+0x967/0x1640
Allocated by task 93:
afs_lookup_server+0x1a7/0x14c0
afs_alloc_server_list+0x43f/0xb60
afs_create_volume+0x923/0x1490
afs_get_tree+0x1c6/0x10a0
Freed by task 0:
kfree+0x131/0x3c0
rcu_core+0x50a/0x1850
Last potentially related work creation:
__call_rcu_common.constprop.0+0x71/0xa10
afs_put_server+0x213/0x2b0
Preserve old->addresses for the peer app-data update so that removed
peers are cleared before the endpoint state is replaced. Also advance
both cursors when the old and new lists share a peer; activating the
old/new comparison without this would otherwise loop forever on the
shared entry. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix double-unmap of directory block
Fix afs_edit_dir_remove() to use a cleanup function to unmap the block
pointed to by afs_dir_iter::block if it's left pointing to something rather
than manually kunmapping the blocks. Manually kunmapping without clearing
iter.blocks can result in a double-kunmap if afs_dir_find_block() is called
twice in a row (which would be the case if the block being modified is not
first in the hash chain). |
| In the Linux kernel, the following vulnerability has been resolved:
genetlink: pin family module during policy dump
The generic netlink controller's policy dump keeps pointers to the target
family's operation and policy tables in its callback state. A dump may be
split across multiple skbs and remain pending after the initial request.
Netlink pins the module which owns the dump callback, but in this case
that is the controller's owner rather than the target family's owner. The
target family can consequently be unregistered and its module unloaded
while a policy dump is pending. Advancing the dump then dereferences
policy memory from the unloaded module.
Take a reference to the target family's module when the dump starts.
Drop it from the error and done paths. This matches the lifetime for which
the dump context retains the family and policy pointers. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: ice: don't dereference pointers from TP_printk()
After forwarding net-next during the v7.3 merge window we started
seeing:
TRACE EVENT ERROR: Event ice_tx_dim_work has double dereference in TP_printk: REC->q_vector->tx.tx_ring->q_index
WARNING: kernel/trace/trace_events.c:420 at test_double_dereference.cold+0x39/0x4b
this is due to extra checks added in tracing subsystem in
commit b5cc230af5e5 ("tracing: Warn when an event dereferences a pointer in TP_printk()").
Printing happens long after the event was recorded, by which point
the pointers may be invalid (the ring or the dim instance).
Copy the eight scalars into the event instead. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: vfb: defer cleanup until the last reference
FBIOGETCMAP takes a shallow snapshot of info->cmap and performs the
usercopy after dropping info->lock. vfb_remove() frees the colormap
immediately after unregistering the framebuffer, even when an open file
still holds a reference to fb_info. A concurrent driver unbind can
therefore free the colormap while the ioctl copies it to userspace.
KASAN reports:
BUG: KASAN: slab-use-after-free in _copy_to_user
Read of size 512 by task poc/125
_copy_to_user (./include/linux/instrumented.h:129 ./include/linux/uaccess.h:201 lib/usercopy.c:24)
fb_cmap_to_user (./include/linux/uaccess.h:230 drivers/video/fbdev/core/fbcmap.c:211)
do_fb_ioctl (drivers/video/fbdev/core/fb_chrdev.c:114)
Allocated by task 1:
fb_alloc_cmap_gfp (./include/linux/slab.h:973 ./include/linux/slab.h:1290 drivers/video/fbdev/core/fbcmap.c:108)
vfb_probe (drivers/video/fbdev/vfb.c:459)
Freed by task 124:
fb_dealloc_cmap (drivers/video/fbdev/core/fbcmap.c:151)
vfb_remove (drivers/video/fbdev/vfb.c:489)
unregister_framebuffer() drops the registration reference, and fbdev calls
fb_destroy after the last put_fb_info(). Move the registered framebuffer's
cleanup into an fb_destroy callback so its colormap and screen buffer stay
alive until all file references have been released. |
