| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In http-proxy-middleware before 2.0.9 and 3.x before 3.0.5, fixRequestBody proceeds even if bodyParser has failed. |
| Meshtastic device firmware is a firmware for meshtastic devices to run an open source, off-grid, decentralized, mesh network built to run on affordable, low-power devices. Meshtastic device firmware is subject to a denial of serivce vulnerability in MQTT handling, fixed in version 2.4.1 of the Meshtastic firmware and on the Meshtastic public MQTT Broker. It's strongly suggested that all users of Meshtastic, particularly those that connect to a privately hosted MQTT server, update to this or a more recent stable version right away. There are no known workarounds for this vulnerability. |
| quic-go is an implementation of the QUIC protocol in Go. In versions prior to 0.49.0, 0.54.1, and 0.55.0, a misbehaving or malicious server can cause a denial-of-service (DoS) attack on the quic-go client by triggering an assertion failure, leading to a process crash. This requires no authentication and can be exploited during the handshake phase. This was observed in the wild with certain server implementations. quic-go needs to be able to handle misbehaving server implementations, including those that prematurely send a HANDSHAKE_DONE frame. Versions 0.49.0, 0.54.1, and 0.55.0 discard Initial keys when receiving a HANDSHAKE_DONE frame, thereby correctly handling premature HANDSHAKE_DONE frames. |
| A security issue exists within the Studio 5000 Logix Designer add-on profile (AOP) for the ArmorStart Classic distributed motor controller, resulting in denial-of-service. This vulnerability is possible due to the input of invalid values into Component Object Model (COM) methods. |
| Vulnerability of improper exception handling in the print module. Successful exploitation of this vulnerability may affect availability. |
| An improper check or handling of exceptional conditions vulnerability [CWE-703] in FortiOS version 7.4.0 through 7.4.3 and before 7.2.7, FortiProxy version 7.4.0 through 7.4.3 and before 7.2.9, FortiPAM before 1.2.0 and FortiSwitchManager version 7.2.0 through 7.2.3 and version 7.0.0 through 7.0.3 fgfm daemon may allow an unauthenticated attacker to repeatedly reset the fgfm connection via crafted SSL encrypted TCP requests. |
| In GnuPG before 2.5.5, if a user chooses to import a certificate with certain crafted subkey data that lacks a valid backsig or that has incorrect usage flags, the user loses the ability to verify signatures made from certain other signing keys, aka a "verification DoS." |
| An issue was discovered in libexpat before 2.6.4. There is a crash within the XML_ResumeParser function because XML_StopParser can stop/suspend an unstarted parser. |
| mintplex-labs/anything-llm is vulnerable to multiple security issues due to improper input validation in several endpoints. An attacker can exploit these vulnerabilities to escalate privileges from a default user role to an admin role, read and delete arbitrary files on the system, and perform Server-Side Request Forgery (SSRF) attacks. The vulnerabilities are present in the `/request-token`, `/workspace/:slug/thread/:threadSlug/update`, `/system/remove-logo`, `/system/logo`, and collector's `/process` endpoints. These issues are due to the application's failure to properly validate user input before passing it to `prisma` functions and other critical operations. Affected versions include the latest version prior to 1.0.0. |
| A vulnerability in the LangChainLLM class of the run-llama/llama_index repository, version v0.12.5, allows for a Denial of Service (DoS) attack. The stream_complete method executes the llm using a thread and retrieves the result via the get_response_gen method of the StreamingGeneratorCallbackHandler class. If the thread terminates abnormally before the _llm.predict is executed, there is no exception handling for this case, leading to an infinite loop in the get_response_gen function. This can be triggered by providing an input of an incorrect type, causing the thread to terminate and the process to continue running indefinitely. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial-Of-Service (DoS).
When an affected system receives a specific BGP EVPN update message over an established BGP session, this causes an rpd crash and restart.
A BGP EVPN configuration is not necessary to be vulnerable. If peers are not configured to send BGP EVPN updates to a vulnerable device, then this issue can't occur.
This issue affects iBGP and eBGP, over IPv4 and IPv6.
This issue affects:
Junos OS:
* 23.4 versions from
23.4R2-S3 before 23.4R2-S5,
* 24.2 versions from
24.2R2
before 24.2R2-S1,
* 24.4 versions before 24.4R1-S3, 24.4R2;
Junos OS Evolved:
* 23.4-EVO versions from 23.4R2-S2-EVO before 23.4R2-S5-EVO,
* 24.2-EVO versions from 24.2R2-EVO before 24.2R2-S1-EVO,
* 24.4-EVO versions before 24.4R1-S3-EVO, 24.4R2-EVO. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS Evolved on PTX Series allows an unauthenticated, network-based attacker to cause impact to confidentiality and availability.
When an output firewall filter is configured with one or more terms where the action is 'reject', packets matching these terms are erroneously sent to the Routing Engine (RE) and further processed there. Processing of these packets will consume limited RE resources. Also responses from the RE back to the source of this traffic could reveal confidential information about the affected device.
This issue only applies to firewall filters applied to WAN or revenue interfaces, so not the mgmt or lo0 interface of the routing-engine, nor any input filters.
This issue affects Junos OS Evolved on PTX Series:
* all versions before 22.4R3-EVO,
* 23.2 versions before 23.2R2-EVO. |
| A denial of service vulnerability exists in Arcserve Unified Data Protection 9.2 and 8.1 in ASNative.dll. |
| Firebird is a relational database. Prior to snapshot versions 4.0.6.3183, 5.0.2.1610, and 6.0.0.609, Firebird is vulnerable if ExtConnPoolSize is not set equal to 0. If connections stored in ExtConnPool are not verified for presence and suitability of the CryptCallback interface is used when created versus what is available could result in a segfault in the server process. Encrypted databases, accessed by execute statement on external, may be accessed later by an attachment missing a key to that database. In a case when execute statement are chained, segfault may happen. Additionally, the segfault may affect unencrypted databases. This issue has been patched in snapshot versions 4.0.6.3183, 5.0.2.1610, and 6.0.0.609 and point releases 4.0.6 and 5.0.2. A workaround for this issue involves setting ExtConnPoolSize equal to 0 in firebird.conf. |
| DO NOT USE THIS CVE RECORD. ConsultIDs: CVE-2023-47038. Reason: This record is a duplicate of CVE-2023-47038. Notes: All CVE users should reference CVE-2023-47038 instead of this record. All references and descriptions in this record have been removed to prevent accidental usage. |
| Wapro ERP Desktop is vulnerable to MS SQL protocol downgrade request from a server side, what could lead to an unencrypted communication vulnerable to data interception and modification. This issue affects Wapro ERP Desktop versions before 9.00.0. |
| Enterprise Protection contains an improper input validation vulnerability in attachment defense that allows an unauthenticated remote attacker to bypass attachment scanning security policy by sending a malicious S/MIME attachment with an opaque signature. When opened by a recipient in a downstream email client, the malicious attachment could cause partial loss of integrity and confidentiality to their system. |
| A missing exception check in Palo Alto Networks PAN-OS® software with the web proxy feature enabled allows an unauthenticated attacker to send a burst of maliciously crafted packets that causes the firewall to become unresponsive and eventually reboot. Repeated successful attempts to trigger this condition will cause the firewall to enter maintenance mode.
This issue does not affect Cloud NGFW or Prisma Access. |
| Volto is a ReactJS-based frontend for the Plone Content Management System. Versions 16.34.0 and below, 17.0.0 through 17.22.1, 18.0.0 through 18.27.1, and 19.0.0-alpha.1 through 19.0.0-alpha.5, an anonymous user could cause the NodeJS server part of Volto to quit with an error when visiting a specific URL. This issue is fixed in versions 16.34.1, 17.22.2, 18.27.2 and 19.0.0-alpha.6. |
| OpenPLC_V3 has a vulnerability in the enipThread function that occurs due to the lack of a return value. This leads to a crash when the server loop ends and execution hits an illegal ud2 instruction. This issue can be triggered remotely without authentication by starting the same server multiple times or if the server exits unexpectedly. The vulnerability allows an attacker to cause a Denial of Service (DoS) against the PLC runtime, stopping any PC started remotely without authentication. This results in the PLC process crashing and halting all automation or control logic managed by OpenPLC. |
