Filtered by vendor Vyperlang
Subscriptions
Total
32 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-40015 | 1 Vyperlang | 1 Vyper | 2024-11-19 | 3.7 Low |
| Vyper is a Pythonic Smart Contract Language. For the following (probably non-exhaustive) list of expressions, the compiler evaluates the arguments from right to left instead of left to right. `unsafe_add, unsafe_sub, unsafe_mul, unsafe_div, pow_mod256, |, &, ^ (bitwise operators), bitwise_or (deprecated), bitwise_and (deprecated), bitwise_xor (deprecated), raw_call, <, >, <=, >=, ==, !=, in, not in (when lhs and rhs are enums)`. This behaviour becomes a problem when the evaluation of one of the arguments produces side effects that other arguments depend on. The following expressions can produce side-effect: state modifying external call , state modifying internal call, `raw_call`, `pop()` when used on a Dynamic Array stored in the storage, `create_minimal_proxy_to`, `create_copy_of`, `create_from_blueprint`. This issue has not yet been patched. Users are advised to make sure that the arguments of the expression do not produce side effects or, if one does, that no other argument is dependent on those side effects. | ||||
| CVE-2024-24564 | 1 Vyperlang | 1 Vyper | 2024-10-25 | 3.7 Low |
| Vyper is a pythonic Smart Contract Language for the ethereum virtual machine. When using the built-in `extract32(b, start)`, if the `start` index provided has for side effect to update `b`, the byte array to extract `32` bytes from, it could be that some dirty memory is read and returned by `extract32`. This vulnerability is fixed in 0.4.0. | ||||
| CVE-2023-39363 | 1 Vyperlang | 1 Vyper | 2024-10-11 | 5.9 Medium |
| Vyper is a Pythonic Smart Contract Language for the Ethereum Virtual Machine (EVM). In versions 0.2.15, 0.2.16 and 0.3.0, named re-entrancy locks are allocated incorrectly. Each function using a named re-entrancy lock gets a unique lock regardless of the key, allowing cross-function re-entrancy in contracts compiled with the susceptible versions. A specific set of conditions is required to result in misbehavior of affected contracts, specifically: a `.vy` contract compiled with `vyper` versions `0.2.15`, `0.2.16`, or `0.3.0`; a primary function that utilizes the `@nonreentrant` decorator with a specific `key` and does not strictly follow the check-effects-interaction pattern (i.e. contains an external call to an untrusted party before storage updates); and a secondary function that utilizes the same `key` and would be affected by the improper state caused by the primary function. Version 0.3.1 contains a fix for this issue. | ||||
| CVE-2024-22419 | 1 Vyperlang | 1 Vyper | 2024-10-09 | 7.3 High |
| Vyper is a Pythonic Smart Contract Language for the Ethereum Virtual Machine. The `concat` built-in can write over the bounds of the memory buffer that was allocated for it and thus overwrite existing valid data. The root cause is that the `build_IR` for `concat` doesn't properly adhere to the API of copy functions (for `>=0.3.2` the `copy_bytes` function). A contract search was performed and no vulnerable contracts were found in production. The buffer overflow can result in the change of semantics of the contract. The overflow is length-dependent and thus it might go unnoticed during contract testing. However, certainly not all usages of concat will result in overwritten valid data as we require it to be in an internal function and close to the return statement where other memory allocations don't occur. This issue has been addressed in 0.4.0. | ||||
| CVE-2023-37902 | 1 Vyperlang | 1 Vyper | 2024-10-03 | 5.3 Medium |
| Vyper is a Pythonic programming language that targets the Ethereum Virtual Machine (EVM). Prior to version 0.3.10, the ecrecover precompile does not fill the output buffer if the signature does not verify. However, the ecrecover builtin will still return whatever is at memory location 0. This means that the if the compiler has been convinced to write to the 0 memory location with specially crafted data (generally, this can happen with a hashmap access or immutable read) just before the ecrecover, a signature check might pass on an invalid signature. Version 0.3.10 contains a patch for this issue. | ||||
| CVE-2023-41052 | 1 Vyperlang | 1 Vyper | 2024-09-26 | 3.7 Low |
| Vyper is a Pythonic Smart Contract Language. In affected versions the order of evaluation of the arguments of the builtin functions `uint256_addmod`, `uint256_mulmod`, `ecadd` and `ecmul` does not follow source order. This behaviour is problematic when the evaluation of one of the arguments produces side effects that other arguments depend on. A patch is currently being developed on pull request #3583. When using builtins from the list above, users should make sure that the arguments of the expression do not produce side effects or, if one does, that no other argument is dependent on those side effects. | ||||
| CVE-2023-42441 | 1 Vyperlang | 1 Vyper | 2024-09-24 | 5.3 Medium |
| Vyper is a Pythonic Smart Contract Language for the Ethereum Virtual Machine (EVM). Starting in version 0.2.9 and prior to version 0.3.10, locks of the type `@nonreentrant("")` or `@nonreentrant('')` do not produce reentrancy checks at runtime. This issue is fixed in version 0.3.10. As a workaround, ensure the lock name is a non-empty string. | ||||
| CVE-2023-42443 | 1 Vyperlang | 1 Vyper | 2024-09-24 | 8.1 High |
| Vyper is a Pythonic Smart Contract Language for the Ethereum Virtual Machine (EVM). In version 0.3.9 and prior, under certain conditions, the memory used by the builtins `raw_call`, `create_from_blueprint` and `create_copy_of` can be corrupted. For `raw_call`, the argument buffer of the call can be corrupted, leading to incorrect `calldata` in the sub-context. For `create_from_blueprint` and `create_copy_of`, the buffer for the to-be-deployed bytecode can be corrupted, leading to deploying incorrect bytecode. Each builtin has conditions that must be fulfilled for the corruption to happen. For `raw_call`, the `data` argument of the builtin must be `msg.data` and the `value` or `gas` passed to the builtin must be some complex expression that results in writing to the memory. For `create_copy_of`, the `value` or `salt` passed to the builtin must be some complex expression that results in writing to the memory. For `create_from_blueprint`, either no constructor parameters should be passed to the builtin or `raw_args` should be set to True, and the `value` or `salt` passed to the builtin must be some complex expression that results in writing to the memory. As of time of publication, no patched version exists. The issue is still being investigated, and there might be other cases where the corruption might happen. When the builtin is being called from an `internal` function `F`, the issue is not present provided that the function calling `F` wrote to memory before calling `F`. As a workaround, the complex expressions that are being passed as kwargs to the builtin should be cached in memory prior to the call to the builtin. | ||||
| CVE-2023-42460 | 1 Vyperlang | 1 Vyper | 2024-09-24 | 5.3 Medium |
| Vyper is a Pythonic Smart Contract Language for the EVM. The `_abi_decode()` function does not validate input when it is nested in an expression. Uses of `_abi_decode()` can be constructed which allow for bounds checking to be bypassed resulting in incorrect results. This issue has not yet been fixed, but a fix is expected in release `0.3.10`. Users are advised to reference pull request #3626. | ||||
| CVE-2024-24559 | 1 Vyperlang | 1 Vyper | 2024-08-26 | 3.7 Low |
| Vyper is a Pythonic Smart Contract Language for the EVM. There is an error in the stack management when compiling the `IR` for `sha3_64`. Concretely, the `height` variable is miscalculated. The vulnerability can't be triggered without writing the `IR` by hand (that is, it cannot be triggered from regular vyper code). `sha3_64` is used for retrieval in mappings. No flow that would cache the `key` was found so the issue shouldn't be possible to trigger when compiling the compiler-generated `IR`. This issue isn't triggered during normal compilation of vyper code so the impact is low. At the time of publication there is no patch available. | ||||
| CVE-2021-41122 | 1 Vyperlang | 1 Vyper | 2024-08-04 | 4.3 Medium |
| Vyper is a Pythonic Smart Contract Language for the EVM. In affected versions external functions did not properly validate the bounds of decimal arguments. The can lead to logic errors. This issue has been resolved in version 0.3.0. | ||||
| CVE-2021-41121 | 1 Vyperlang | 1 Vyper | 2024-08-04 | 7.5 High |
| Vyper is a Pythonic Smart Contract Language for the EVM. In affected versions when performing a function call inside a literal struct, there is a memory corruption issue that occurs because of an incorrect pointer to the the top of the stack. This issue has been resolved in version 0.3.0. | ||||
| CVE-2022-29255 | 1 Vyperlang | 1 Vyper | 2024-08-03 | 8.2 High |
| Vyper is a Pythonic Smart Contract Language for the ethereum virtual machine. In versions prior to 0.3.4 when a calling an external contract with no return value, the contract address (including side effects) could be evaluated twice. This may result in incorrect outcomes for contracts. This issue has been addressed in v0.3.4. | ||||
| CVE-2022-24787 | 1 Vyperlang | 1 Vyper | 2024-08-03 | 7.5 High |
| Vyper is a Pythonic Smart Contract Language for the Ethereum Virtual Machine. In version 0.3.1 and prior, bytestrings can have dirty bytes in them, resulting in the word-for-word comparisons giving incorrect results. Even without dirty nonzero bytes, two bytestrings can compare to equal if one ends with `"\x00"` because there is no comparison of the length. A patch is available and expected to be part of the 0.3.2 release. There are currently no known workarounds. | ||||
| CVE-2022-24788 | 1 Vyperlang | 1 Vyper | 2024-08-03 | 7.1 High |
| Vyper is a pythonic Smart Contract Language for the ethereum virtual machine. Versions of vyper prior to 0.3.2 suffer from a potential buffer overrun. Importing a function from a JSON interface which returns `bytes` generates bytecode which does not clamp bytes length, potentially resulting in a buffer overrun. Users are advised to upgrade. There are no known workarounds for this issue. | ||||
| CVE-2022-24845 | 1 Vyperlang | 1 Vyper | 2024-08-03 | 8.8 High |
| Vyper is a pythonic Smart Contract Language for the ethereum virtual machine. In affected versions, the return of `<iface>.returns_int128()` is not validated to fall within the bounds of `int128`. This issue can result in a misinterpretation of the integer value and lead to incorrect behavior. As of v0.3.0, `<iface>.returns_int128()` is validated in simple expressions, but not complex expressions. Users are advised to upgrade. There is no known workaround for this issue. | ||||
| CVE-2023-46247 | 1 Vyperlang | 1 Vyper | 2024-08-02 | 7.5 High |
| Vyper is a Pythonic Smart Contract Language for the Ethereum Virtual Machine (EVM). Contracts containing large arrays might underallocate the number of slots they need by 1. Prior to v0.3.8, the calculation to determine how many slots a storage variable needed used `math.ceil(type_.size_in_bytes / 32)`. The intermediate floating point step can produce a rounding error if there are enough bits set in the IEEE-754 mantissa. Roughly speaking, if `type_.size_in_bytes` is large (> 2**46), and slightly less than a power of 2, the calculation can overestimate how many slots are needed by 1. If `type_.size_in_bytes` is slightly more than a power of 2, the calculation can underestimate how many slots are needed by 1. This issue is patched in version 0.3.8. | ||||
| CVE-2023-32675 | 1 Vyperlang | 1 Vyper | 2024-08-02 | 3.7 Low |
| Vyper is a pythonic Smart Contract Language for the ethereum virtual machine. In contracts with more than one regular nonpayable function, it is possible to send funds to the default function, even if the default function is marked `nonpayable`. This applies to contracts compiled with vyper versions prior to 0.3.8. This issue was fixed by the removal of the global `calldatasize` check in commit `02339dfda`. Users are advised to upgrade to version 0.3.8. Users unable to upgrade should avoid use of nonpayable default functions. | ||||
| CVE-2023-32059 | 1 Vyperlang | 1 Vyper | 2024-08-02 | 7.5 High |
| Vyper is a Pythonic smart contract language for the Ethereum virtual machine. Prior to version 0.3.8, internal calls with default arguments are compiled incorrectly. Depending on the number of arguments provided in the call, the defaults are added not right-to-left, but left-to-right. If the types are incompatible, typechecking is bypassed. The ability to pass kwargs to internal functions is an undocumented feature that is not well known about. The issue is patched in version 0.3.8. | ||||
| CVE-2023-32058 | 1 Vyperlang | 1 Vyper | 2024-08-02 | 7.5 High |
| Vyper is a Pythonic smart contract language for the Ethereum virtual machine. Prior to version 0.3.8, due to missing overflow check for loop variables, by assigning the iterator of a loop to a variable, it is possible to overflow the type of the latter. The issue seems to happen only in loops of type `for i in range(a, a + N)` as in loops of type `for i in range(start, stop)` and `for i in range(stop)`, the compiler is able to raise a `TypeMismatch` when trying to overflow the variable. The problem has been patched in version 0.3.8. | ||||