| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Xpdf 4.05 (and earlier), invalid header info in a DCT (JPEG) stream can lead to an uninitialized variable in the DCT decoder. The proof-of-concept PDF file causes a segfault attempting to read from an invalid address. |
| A vulnerability was found in libzvbi up to 0.2.43. It has been classified as problematic. Affected is the function vbi_strndup_iconv_ucs2 of the file src/conv.c. The manipulation of the argument src_length leads to uninitialized pointer. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 0.2.44 is able to address this issue. The patch is identified as 8def647eea27f7fd7ad33ff79c2d6d3e39948dce. It is recommended to upgrade the affected component. The code maintainer was informed beforehand about the issues. She reacted very fast and highly professional. |
| PAD CMS improperly initializes parameter used for password recovery, which allows to change password for any user that did not use reset password functionality. This issue affects all 3 templates: www, bip and www+bip.
This product is End-Of-Life and producent will not publish patches for this vulnerability. |
| Use of uninitialized resource in Windows Imaging Component allows an unauthorized attacker to disclose information locally. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: qcom-pmic: init value of hdr_len/txbuf_len earlier
If the read of USB_PDPHY_RX_ACKNOWLEDGE_REG failed, then hdr_len and
txbuf_len are uninitialized. This commit stops to print uninitialized
value and misleading/false data. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: rtq2208: Fix uninitialized use of regulator_config
Fix rtq2208 driver uninitialized use to cause kernel error. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix access to uninitialized variable in tick_ctx_cleanup()
The group variable can't be used to retrieve ptdev in our second loop,
because it points to the previously iterated list_head, not a valid
group. Get the ptdev object from the scheduler instead. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: avoid garbage value in panthor_ioctl_dev_query()
'priorities_info' is uninitialized, and the uninitialized value is copied
to user object when calling PANTHOR_UOBJ_SET(). Using memset to initialize
'priorities_info' to avoid this garbage value problem. |
| In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Fix a use of uninitialized mutex
commit c8347f915e67 ("gpu: host1x: Fix boot regression for Tegra")
caused a use of uninitialized mutex leading to below warning when
CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_LOCK_ALLOC are enabled.
[ 41.662843] ------------[ cut here ]------------
[ 41.663012] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 41.663035] WARNING: CPU: 4 PID: 794 at kernel/locking/mutex.c:587 __mutex_lock+0x670/0x878
[ 41.663458] Modules linked in: rtw88_8822c(+) bluetooth(+) rtw88_pci rtw88_core mac80211 aquantia libarc4 crc_itu_t cfg80211 tegra194_cpufreq dwmac_tegra(+) arm_dsu_pmu stmmac_platform stmmac pcs_xpcs rfkill at24 host1x(+) tegra_bpmp_thermal ramoops reed_solomon fuse loop nfnetlink xfs mmc_block rpmb_core ucsi_ccg ina3221 crct10dif_ce xhci_tegra ghash_ce lm90 sha2_ce sha256_arm64 sha1_ce sdhci_tegra pwm_fan sdhci_pltfm sdhci gpio_keys rtc_tegra cqhci mmc_core phy_tegra_xusb i2c_tegra tegra186_gpc_dma i2c_tegra_bpmp spi_tegra114 dm_mirror dm_region_hash dm_log dm_mod
[ 41.665078] CPU: 4 UID: 0 PID: 794 Comm: (udev-worker) Not tainted 6.11.0-29.31_1538613708.el10.aarch64+debug #1
[ 41.665838] Hardware name: NVIDIA NVIDIA Jetson AGX Orin Developer Kit/Jetson, BIOS 36.3.0-gcid-35594366 02/26/2024
[ 41.672555] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 41.679636] pc : __mutex_lock+0x670/0x878
[ 41.683834] lr : __mutex_lock+0x670/0x878
[ 41.688035] sp : ffff800084b77090
[ 41.691446] x29: ffff800084b77160 x28: ffffdd4bebf7b000 x27: ffffdd4be96b1000
[ 41.698799] x26: 1fffe0002308361c x25: 1ffff0001096ee18 x24: 0000000000000000
[ 41.706149] x23: 0000000000000000 x22: 0000000000000002 x21: ffffdd4be6e3c7a0
[ 41.713500] x20: ffff800084b770f0 x19: ffff00011841b1e8 x18: 0000000000000000
[ 41.720675] x17: 0000000000000000 x16: 0000000000000000 x15: 0720072007200720
[ 41.728023] x14: 0000000000000000 x13: 0000000000000001 x12: ffff6001a96eaab3
[ 41.735375] x11: 1fffe001a96eaab2 x10: ffff6001a96eaab2 x9 : ffffdd4be4838bbc
[ 41.742723] x8 : 00009ffe5691554e x7 : ffff000d4b755593 x6 : 0000000000000001
[ 41.749985] x5 : ffff000d4b755590 x4 : 1fffe0001d88f001 x3 : dfff800000000000
[ 41.756988] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000ec478000
[ 41.764251] Call trace:
[ 41.766695] __mutex_lock+0x670/0x878
[ 41.770373] mutex_lock_nested+0x2c/0x40
[ 41.774134] host1x_intr_start+0x54/0xf8 [host1x]
[ 41.778863] host1x_runtime_resume+0x150/0x228 [host1x]
[ 41.783935] pm_generic_runtime_resume+0x84/0xc8
[ 41.788485] __rpm_callback+0xa0/0x478
[ 41.792422] rpm_callback+0x15c/0x1a8
[ 41.795922] rpm_resume+0x698/0xc08
[ 41.799597] __pm_runtime_resume+0xa8/0x140
[ 41.803621] host1x_probe+0x810/0xbc0 [host1x]
[ 41.807909] platform_probe+0xcc/0x1a8
[ 41.811845] really_probe+0x188/0x800
[ 41.815347] __driver_probe_device+0x164/0x360
[ 41.819810] driver_probe_device+0x64/0x1a8
[ 41.823834] __driver_attach+0x180/0x490
[ 41.827773] bus_for_each_dev+0x104/0x1a0
[ 41.831797] driver_attach+0x44/0x68
[ 41.835296] bus_add_driver+0x23c/0x4e8
[ 41.839235] driver_register+0x15c/0x3a8
[ 41.843170] __platform_register_drivers+0xa4/0x208
[ 41.848159] tegra_host1x_init+0x4c/0xff8 [host1x]
[ 41.853147] do_one_initcall+0xd4/0x380
[ 41.856997] do_init_module+0x1dc/0x698
[ 41.860758] load_module+0xc70/0x1300
[ 41.864435] __do_sys_init_module+0x1a8/0x1d0
[ 41.868721] __arm64_sys_init_module+0x74/0xb0
[ 41.873183] invoke_syscall.constprop.0+0xdc/0x1e8
[ 41.877997] do_el0_svc+0x154/0x1d0
[ 41.881671] el0_svc+0x54/0x140
[ 41.884820] el0t_64_sync_handler+0x120/0x130
[ 41.889285] el0t_64_sync+0x1a4/0x1a8
[ 41.892960] irq event stamp: 69737
[ 41.896370] hardirqs last enabled at (69737): [<ffffdd4be6d7768c>] _raw_spin_unlock_irqrestore+0x44/0xe8
[ 41.905739] hardirqs last disabled at (69736):
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: bh1745: fix information leak in triggered buffer
The 'scan' local struct is used to push data to user space from a
triggered buffer, but it does not set values for inactive channels, as
it only uses iio_for_each_active_channel() to assign new values.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ti-ads1119: fix information leak in triggered buffer
The 'scan' local struct is used to push data to user space from a
triggered buffer, but it has a hole between the sample (unsigned int)
and the timestamp. This hole is never initialized.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: ptrace: fix partial SETREGSET for NT_ARM_FPMR
Currently fpmr_set() doesn't initialize the temporary 'fpmr' variable,
and a SETREGSET call with a length of zero will leave this
uninitialized. Consequently an arbitrary value will be written back to
target->thread.uw.fpmr, potentially leaking up to 64 bits of memory from
the kernel stack. The read is limited to a specific slot on the stack,
and the issue does not provide a write mechanism.
Fix this by initializing the temporary value before copying the regset
from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG,
NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing
contents of FPMR will be retained.
Before this patch:
| # ./fpmr-test
| Attempting to write NT_ARM_FPMR::fpmr = 0x900d900d900d900d
| SETREGSET(nt=0x40e, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_FPMR::fpmr
| GETREGSET(nt=0x40e, len=8) read 8 bytes
| Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d
|
| Attempting to write NT_ARM_FPMR (zero length)
| SETREGSET(nt=0x40e, len=0) wrote 0 bytes
|
| Attempting to read NT_ARM_FPMR::fpmr
| GETREGSET(nt=0x40e, len=8) read 8 bytes
| Read NT_ARM_FPMR::fpmr = 0xffff800083963d50
After this patch:
| # ./fpmr-test
| Attempting to write NT_ARM_FPMR::fpmr = 0x900d900d900d900d
| SETREGSET(nt=0x40e, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_FPMR::fpmr
| GETREGSET(nt=0x40e, len=8) read 8 bytes
| Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d
|
| Attempting to write NT_ARM_FPMR (zero length)
| SETREGSET(nt=0x40e, len=0) wrote 0 bytes
|
| Attempting to read NT_ARM_FPMR::fpmr
| GETREGSET(nt=0x40e, len=8) read 8 bytes
| Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: ptrace: fix partial SETREGSET for NT_ARM_POE
Currently poe_set() doesn't initialize the temporary 'ctrl' variable,
and a SETREGSET call with a length of zero will leave this
uninitialized. Consequently an arbitrary value will be written back to
target->thread.por_el0, potentially leaking up to 64 bits of memory from
the kernel stack. The read is limited to a specific slot on the stack,
and the issue does not provide a write mechanism.
Fix this by initializing the temporary value before copying the regset
from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG,
NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing
contents of POR_EL1 will be retained.
Before this patch:
| # ./poe-test
| Attempting to write NT_ARM_POE::por_el0 = 0x900d900d900d900d
| SETREGSET(nt=0x40f, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_POE::por_el0
| GETREGSET(nt=0x40f, len=8) read 8 bytes
| Read NT_ARM_POE::por_el0 = 0x900d900d900d900d
|
| Attempting to write NT_ARM_POE (zero length)
| SETREGSET(nt=0x40f, len=0) wrote 0 bytes
|
| Attempting to read NT_ARM_POE::por_el0
| GETREGSET(nt=0x40f, len=8) read 8 bytes
| Read NT_ARM_POE::por_el0 = 0xffff8000839c3d50
After this patch:
| # ./poe-test
| Attempting to write NT_ARM_POE::por_el0 = 0x900d900d900d900d
| SETREGSET(nt=0x40f, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_POE::por_el0
| GETREGSET(nt=0x40f, len=8) read 8 bytes
| Read NT_ARM_POE::por_el0 = 0x900d900d900d900d
|
| Attempting to write NT_ARM_POE (zero length)
| SETREGSET(nt=0x40f, len=0) wrote 0 bytes
|
| Attempting to read NT_ARM_POE::por_el0
| GETREGSET(nt=0x40f, len=8) read 8 bytes
| Read NT_ARM_POE::por_el0 = 0x900d900d900d900d |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mempolicy: fix uninit-value in mpol_rebind_policy()
mpol_set_nodemask()(mm/mempolicy.c) does not set up nodemask when
pol->mode is MPOL_LOCAL. Check pol->mode before access
pol->w.cpuset_mems_allowed in mpol_rebind_policy()(mm/mempolicy.c).
BUG: KMSAN: uninit-value in mpol_rebind_policy mm/mempolicy.c:352 [inline]
BUG: KMSAN: uninit-value in mpol_rebind_task+0x2ac/0x2c0 mm/mempolicy.c:368
mpol_rebind_policy mm/mempolicy.c:352 [inline]
mpol_rebind_task+0x2ac/0x2c0 mm/mempolicy.c:368
cpuset_change_task_nodemask kernel/cgroup/cpuset.c:1711 [inline]
cpuset_attach+0x787/0x15e0 kernel/cgroup/cpuset.c:2278
cgroup_migrate_execute+0x1023/0x1d20 kernel/cgroup/cgroup.c:2515
cgroup_migrate kernel/cgroup/cgroup.c:2771 [inline]
cgroup_attach_task+0x540/0x8b0 kernel/cgroup/cgroup.c:2804
__cgroup1_procs_write+0x5cc/0x7a0 kernel/cgroup/cgroup-v1.c:520
cgroup1_tasks_write+0x94/0xb0 kernel/cgroup/cgroup-v1.c:539
cgroup_file_write+0x4c2/0x9e0 kernel/cgroup/cgroup.c:3852
kernfs_fop_write_iter+0x66a/0x9f0 fs/kernfs/file.c:296
call_write_iter include/linux/fs.h:2162 [inline]
new_sync_write fs/read_write.c:503 [inline]
vfs_write+0x1318/0x2030 fs/read_write.c:590
ksys_write+0x28b/0x510 fs/read_write.c:643
__do_sys_write fs/read_write.c:655 [inline]
__se_sys_write fs/read_write.c:652 [inline]
__x64_sys_write+0xdb/0x120 fs/read_write.c:652
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
slab_alloc mm/slub.c:3259 [inline]
kmem_cache_alloc+0x902/0x11c0 mm/slub.c:3264
mpol_new mm/mempolicy.c:293 [inline]
do_set_mempolicy+0x421/0xb70 mm/mempolicy.c:853
kernel_set_mempolicy mm/mempolicy.c:1504 [inline]
__do_sys_set_mempolicy mm/mempolicy.c:1510 [inline]
__se_sys_set_mempolicy+0x44c/0xb60 mm/mempolicy.c:1507
__x64_sys_set_mempolicy+0xd8/0x110 mm/mempolicy.c:1507
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
KMSAN: uninit-value in mpol_rebind_task (2)
https://syzkaller.appspot.com/bug?id=d6eb90f952c2a5de9ea718a1b873c55cb13b59dc
This patch seems to fix below bug too.
KMSAN: uninit-value in mpol_rebind_mm (2)
https://syzkaller.appspot.com/bug?id=f2fecd0d7013f54ec4162f60743a2b28df40926b
The uninit-value is pol->w.cpuset_mems_allowed in mpol_rebind_policy().
When syzkaller reproducer runs to the beginning of mpol_new(),
mpol_new() mm/mempolicy.c
do_mbind() mm/mempolicy.c
kernel_mbind() mm/mempolicy.c
`mode` is 1(MPOL_PREFERRED), nodes_empty(*nodes) is `true` and `flags`
is 0. Then
mode = MPOL_LOCAL;
...
policy->mode = mode;
policy->flags = flags;
will be executed. So in mpol_set_nodemask(),
mpol_set_nodemask() mm/mempolicy.c
do_mbind()
kernel_mbind()
pol->mode is 4 (MPOL_LOCAL), that `nodemask` in `pol` is not initialized,
which will be accessed in mpol_rebind_policy(). |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: da9121: Fix uninit-value in da9121_assign_chip_model()
KASAN report slab-out-of-bounds in __regmap_init as follows:
BUG: KASAN: slab-out-of-bounds in __regmap_init drivers/base/regmap/regmap.c:841
Read of size 1 at addr ffff88803678cdf1 by task xrun/9137
CPU: 0 PID: 9137 Comm: xrun Tainted: G W 5.18.0-rc2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x15a lib/dump_stack.c:88
print_report.cold+0xcd/0x69b mm/kasan/report.c:313
kasan_report+0x8e/0xc0 mm/kasan/report.c:491
__regmap_init+0x4540/0x4ba0 drivers/base/regmap/regmap.c:841
__devm_regmap_init+0x7a/0x100 drivers/base/regmap/regmap.c:1266
__devm_regmap_init_i2c+0x65/0x80 drivers/base/regmap/regmap-i2c.c:394
da9121_i2c_probe+0x386/0x6d1 drivers/regulator/da9121-regulator.c:1039
i2c_device_probe+0x959/0xac0 drivers/i2c/i2c-core-base.c:563
This happend when da9121 device is probe by da9121_i2c_id, but with
invalid dts. Thus, chip->subvariant_id is set to -EINVAL, and later
da9121_assign_chip_model() will access 'regmap' without init it.
Fix it by return -EINVAL from da9121_assign_chip_model() if
'chip->subvariant_id' is invalid. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: check attribute length for bearer name
syzbot reported uninit-value:
=====================================================
BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:644 [inline]
BUG: KMSAN: uninit-value in string+0x4f9/0x6f0 lib/vsprintf.c:725
string_nocheck lib/vsprintf.c:644 [inline]
string+0x4f9/0x6f0 lib/vsprintf.c:725
vsnprintf+0x2222/0x3650 lib/vsprintf.c:2806
vprintk_store+0x537/0x2150 kernel/printk/printk.c:2158
vprintk_emit+0x28b/0xab0 kernel/printk/printk.c:2256
vprintk_default+0x86/0xa0 kernel/printk/printk.c:2283
vprintk+0x15f/0x180 kernel/printk/printk_safe.c:50
_printk+0x18d/0x1cf kernel/printk/printk.c:2293
tipc_enable_bearer net/tipc/bearer.c:371 [inline]
__tipc_nl_bearer_enable+0x2022/0x22a0 net/tipc/bearer.c:1033
tipc_nl_bearer_enable+0x6c/0xb0 net/tipc/bearer.c:1042
genl_family_rcv_msg_doit net/netlink/genetlink.c:731 [inline]
- Do sanity check the attribute length for TIPC_NLA_BEARER_NAME.
- Do not use 'illegal name' in printing message. |
| In the Linux kernel, the following vulnerability has been resolved:
rtl818x: Prevent using not initialized queues
Using not existing queues can panic the kernel with rtl8180/rtl8185 cards.
Ignore the skb priority for those cards, they only have one tx queue. Pierre
Asselin (pa@panix.com) reported the kernel crash in the Gentoo forum:
https://forums.gentoo.org/viewtopic-t-1147832-postdays-0-postorder-asc-start-25.html
He also confirmed that this patch fixes the issue. In summary this happened:
After updating wpa_supplicant from 2.9 to 2.10 the kernel crashed with a
"divide error: 0000" when connecting to an AP. Control port tx now tries to
use IEEE80211_AC_VO for the priority, which wpa_supplicants starts to use in
2.10.
Since only the rtl8187se part of the driver supports QoS, the priority
of the skb is set to IEEE80211_AC_BE (2) by mac80211 for rtl8180/rtl8185
cards.
rtl8180 is then unconditionally reading out the priority and finally crashes on
drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c line 544 without this
patch:
idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries
"ring->entries" is zero for rtl8180/rtl8185 cards, tx_ring[2] never got
initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8712: fix uninit-value in usb_read8() and friends
When r8712_usbctrl_vendorreq() returns negative, 'data' in
usb_read{8,16,32} will not be initialized.
BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:643 [inline]
BUG: KMSAN: uninit-value in string+0x4ec/0x6f0 lib/vsprintf.c:725
string_nocheck lib/vsprintf.c:643 [inline]
string+0x4ec/0x6f0 lib/vsprintf.c:725
vsnprintf+0x2222/0x3650 lib/vsprintf.c:2806
va_format lib/vsprintf.c:1704 [inline]
pointer+0x18e6/0x1f70 lib/vsprintf.c:2443
vsnprintf+0x1a9b/0x3650 lib/vsprintf.c:2810
vprintk_store+0x537/0x2150 kernel/printk/printk.c:2158
vprintk_emit+0x28b/0xab0 kernel/printk/printk.c:2256
dev_vprintk_emit+0x5ef/0x6d0 drivers/base/core.c:4604
dev_printk_emit+0x1dd/0x21f drivers/base/core.c:4615
__dev_printk+0x3be/0x440 drivers/base/core.c:4627
_dev_info+0x1ea/0x22f drivers/base/core.c:4673
r871xu_drv_init+0x1929/0x3070 drivers/staging/rtl8712/usb_intf.c:401
usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396
really_probe+0x6c7/0x1350 drivers/base/dd.c:621
__driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752
driver_probe_device drivers/base/dd.c:782 [inline]
__device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899
bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427
__device_attach+0x593/0x8e0 drivers/base/dd.c:970
device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017
bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487
device_add+0x1fff/0x26e0 drivers/base/core.c:3405
usb_set_configuration+0x37e9/0x3ed0 drivers/usb/core/message.c:2170
usb_generic_driver_probe+0x13c/0x300 drivers/usb/core/generic.c:238
usb_probe_device+0x309/0x570 drivers/usb/core/driver.c:293
really_probe+0x6c7/0x1350 drivers/base/dd.c:621
__driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752
driver_probe_device drivers/base/dd.c:782 [inline]
__device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899
bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427
__device_attach+0x593/0x8e0 drivers/base/dd.c:970
device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017
bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487
device_add+0x1fff/0x26e0 drivers/base/core.c:3405
usb_new_device+0x1b91/0x2950 drivers/usb/core/hub.c:2566
hub_port_connect drivers/usb/core/hub.c:5363 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5507 [inline]
port_event drivers/usb/core/hub.c:5665 [inline]
hub_event+0x58e3/0x89e0 drivers/usb/core/hub.c:5747
process_one_work+0xdb6/0x1820 kernel/workqueue.c:2289
worker_thread+0x10d0/0x2240 kernel/workqueue.c:2436
kthread+0x3c7/0x500 kernel/kthread.c:376
ret_from_fork+0x1f/0x30
Local variable data created at:
usb_read8+0x5d/0x130 drivers/staging/rtl8712/usb_ops.c:33
r8712_read8+0xa5/0xd0 drivers/staging/rtl8712/rtl8712_io.c:29
KMSAN: uninit-value in r871xu_drv_init
https://syzkaller.appspot.com/bug?id=3cd92b1d85428b128503bfa7a250294c9ae00bd8 |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8712: fix uninit-value in r871xu_drv_init()
When 'tmpU1b' returns from r8712_read8(padapter, EE_9346CR) is 0,
'mac[6]' will not be initialized.
BUG: KMSAN: uninit-value in r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541
r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541
usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396
really_probe+0x653/0x14b0 drivers/base/dd.c:596
__driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752
driver_probe_device drivers/base/dd.c:782 [inline]
__device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899
bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427
__device_attach+0x593/0x8e0 drivers/base/dd.c:970
device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017
bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487
device_add+0x1fff/0x26e0 drivers/base/core.c:3405
usb_set_configuration+0x37e9/0x3ed0 drivers/usb/core/message.c:2170
usb_generic_driver_probe+0x13c/0x300 drivers/usb/core/generic.c:238
usb_probe_device+0x309/0x570 drivers/usb/core/driver.c:293
really_probe+0x653/0x14b0 drivers/base/dd.c:596
__driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752
driver_probe_device drivers/base/dd.c:782 [inline]
__device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899
bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427
__device_attach+0x593/0x8e0 drivers/base/dd.c:970
device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017
bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487
device_add+0x1fff/0x26e0 drivers/base/core.c:3405
usb_new_device+0x1b8e/0x2950 drivers/usb/core/hub.c:2566
hub_port_connect drivers/usb/core/hub.c:5358 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5502 [inline]
port_event drivers/usb/core/hub.c:5660 [inline]
hub_event+0x58e3/0x89e0 drivers/usb/core/hub.c:5742
process_one_work+0xdb6/0x1820 kernel/workqueue.c:2307
worker_thread+0x10b3/0x21e0 kernel/workqueue.c:2454
kthread+0x3c7/0x500 kernel/kthread.c:377
ret_from_fork+0x1f/0x30
Local variable mac created at:
r871xu_drv_init+0x1771/0x3070 drivers/staging/rtl8712/usb_intf.c:394
usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396
KMSAN: uninit-value in r871xu_drv_init
https://syzkaller.appspot.com/bug?id=3cd92b1d85428b128503bfa7a250294c9ae00bd8 |
| In the Linux kernel, the following vulnerability has been resolved:
ath9k_htc: fix uninit value bugs
Syzbot reported 2 KMSAN bugs in ath9k. All of them are caused by missing
field initialization.
In htc_connect_service() svc_meta_len and pad are not initialized. Based
on code it looks like in current skb there is no service data, so simply
initialize svc_meta_len to 0.
htc_issue_send() does not initialize htc_frame_hdr::control array. Based
on firmware code, it will initialize it by itself, so simply zero whole
array to make KMSAN happy
Fail logs:
BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline]
hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479
htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline]
htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275
...
Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1126 [inline]
htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258
...
Bytes 4-7 of 18 are uninitialized
Memory access of size 18 starts at ffff888027377e00
BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline]
hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479
htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline]
htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275
...
Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1126 [inline]
htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258
...
Bytes 16-17 of 18 are uninitialized
Memory access of size 18 starts at ffff888027377e00 |
