| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| JavaScript can be ran inside the address bar via the dashboard "Open in new Tab" Button, making the application vulnerable to session hijacking. |
| In the Linux kernel, the following vulnerability has been resolved:
dm integrity: call kmem_cache_destroy() in dm_integrity_init() error path
Otherwise the journal_io_cache will leak if dm_register_target() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash
When CPU 0 is offline and intel_powerclamp is used to inject
idle, it generates kernel BUG:
BUG: using smp_processor_id() in preemptible [00000000] code: bash/15687
caller is debug_smp_processor_id+0x17/0x20
CPU: 4 PID: 15687 Comm: bash Not tainted 5.19.0-rc7+ #57
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x63
dump_stack+0x10/0x16
check_preemption_disabled+0xdd/0xe0
debug_smp_processor_id+0x17/0x20
powerclamp_set_cur_state+0x7f/0xf9 [intel_powerclamp]
...
...
Here CPU 0 is the control CPU by default and changed to the current CPU,
if CPU 0 offlined. This check has to be performed under cpus_read_lock(),
hence the above warning.
Use get_cpu() instead of smp_processor_id() to avoid this BUG.
[ rjw: Subject edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix crash when I/O abort times out
While performing CPU hotplug, a crash with the following stack was seen:
Call Trace:
qla24xx_process_response_queue+0x42a/0x970 [qla2xxx]
qla2x00_start_nvme_mq+0x3a2/0x4b0 [qla2xxx]
qla_nvme_post_cmd+0x166/0x240 [qla2xxx]
nvme_fc_start_fcp_op.part.0+0x119/0x2e0 [nvme_fc]
blk_mq_dispatch_rq_list+0x17b/0x610
__blk_mq_sched_dispatch_requests+0xb0/0x140
blk_mq_sched_dispatch_requests+0x30/0x60
__blk_mq_run_hw_queue+0x35/0x90
__blk_mq_delay_run_hw_queue+0x161/0x180
blk_execute_rq+0xbe/0x160
__nvme_submit_sync_cmd+0x16f/0x220 [nvme_core]
nvmf_connect_admin_queue+0x11a/0x170 [nvme_fabrics]
nvme_fc_create_association.cold+0x50/0x3dc [nvme_fc]
nvme_fc_connect_ctrl_work+0x19/0x30 [nvme_fc]
process_one_work+0x1e8/0x3c0
On abort timeout, completion was called without checking if the I/O was
already completed.
Verify that I/O and abort request are indeed outstanding before attempting
completion. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: alx: take rtnl_lock on resume
Zbynek reports that alx trips an rtnl assertion on resume:
RTNL: assertion failed at net/core/dev.c (2891)
RIP: 0010:netif_set_real_num_tx_queues+0x1ac/0x1c0
Call Trace:
<TASK>
__alx_open+0x230/0x570 [alx]
alx_resume+0x54/0x80 [alx]
? pci_legacy_resume+0x80/0x80
dpm_run_callback+0x4a/0x150
device_resume+0x8b/0x190
async_resume+0x19/0x30
async_run_entry_fn+0x30/0x130
process_one_work+0x1e5/0x3b0
indeed the driver does not hold rtnl_lock during its internal close
and re-open functions during suspend/resume. Note that this is not
a huge bug as the driver implements its own locking, and does not
implement changing the number of queues, but we need to silence
the splat. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-core: Fix double free in dvb_register_device()
In function dvb_register_device() -> dvb_register_media_device() ->
dvb_create_media_entity(), dvb->entity is allocated and initialized. If
the initialization fails, it frees the dvb->entity, and return an error
code. The caller takes the error code and handles the error by calling
dvb_media_device_free(), which unregisters the entity and frees the
field again if it is not NULL. As dvb->entity may not NULLed in
dvb_create_media_entity() when the allocation of dvbdev->pad fails, a
double free may occur. This may also cause an Use After free in
media_device_unregister_entity().
Fix this by storing NULL to dvb->entity when it is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Fix pci device refcount leak in ppr_notifier()
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put(). So call it before returning from ppr_notifier()
to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt76x0: fix oob access in mt76x0_phy_get_target_power
After 'commit ba45841ca5eb ("wifi: mt76: mt76x02: simplify struct
mt76x02_rate_power")', mt76x02 relies on ht[0-7] rate_power data for
vht mcs{0,7}, while it uses vth[0-1] rate_power for vht mcs {8,9}.
Fix a possible out-of-bound access in mt76x0_phy_get_target_power routine. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid use-after-free for cached IPU bio
xfstest generic/019 reports a bug:
kernel BUG at mm/filemap.c:1619!
RIP: 0010:folio_end_writeback+0x8a/0x90
Call Trace:
end_page_writeback+0x1c/0x60
f2fs_write_end_io+0x199/0x420
bio_endio+0x104/0x180
submit_bio_noacct+0xa5/0x510
submit_bio+0x48/0x80
f2fs_submit_write_bio+0x35/0x300
f2fs_submit_merged_ipu_write+0x2a0/0x2b0
f2fs_write_single_data_page+0x838/0x8b0
f2fs_write_cache_pages+0x379/0xa30
f2fs_write_data_pages+0x30c/0x340
do_writepages+0xd8/0x1b0
__writeback_single_inode+0x44/0x370
writeback_sb_inodes+0x233/0x4d0
__writeback_inodes_wb+0x56/0xf0
wb_writeback+0x1dd/0x2d0
wb_workfn+0x367/0x4a0
process_one_work+0x21d/0x430
worker_thread+0x4e/0x3c0
kthread+0x103/0x130
ret_from_fork+0x2c/0x50
The root cause is: after cp_error is set, f2fs_submit_merged_ipu_write()
in f2fs_write_single_data_page() tries to flush IPU bio in cache, however
f2fs_submit_merged_ipu_write() missed to check validity of @bio parameter,
result in submitting random cached bio which belong to other IO context,
then it will cause use-after-free issue, fix it by adding additional
validity check. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa: Add max vqp attr to vdpa_nl_policy for nlattr length check
The vdpa_nl_policy structure is used to validate the nlattr when parsing
the incoming nlmsg. It will ensure the attribute being described produces
a valid nlattr pointer in info->attrs before entering into each handler
in vdpa_nl_ops.
That is to say, the missing part in vdpa_nl_policy may lead to illegal
nlattr after parsing, which could lead to OOB read just like CVE-2023-3773.
This patch adds the missing nla_policy for vdpa max vqp attr to avoid
such bugs. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: davinci: Fix clk use after free
The remove function first frees the clks and only then calls
cpufreq_unregister_driver(). If one of the cpufreq callbacks is called
just before cpufreq_unregister_driver() is run, the freed clks might be
used. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: unmap and remove csa_va properly
Root PD BO should be reserved before unmap and remove
a bo_va from VM otherwise lockdep will complain.
v2: check fpriv->csa_va is not NULL instead of amdgpu_mcbp (christian)
[14616.936827] WARNING: CPU: 6 PID: 1711 at drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1762 amdgpu_vm_bo_del+0x399/0x3f0 [amdgpu]
[14616.937096] Call Trace:
[14616.937097] <TASK>
[14616.937102] amdgpu_driver_postclose_kms+0x249/0x2f0 [amdgpu]
[14616.937187] drm_file_free+0x1d6/0x300 [drm]
[14616.937207] drm_close_helper.isra.0+0x62/0x70 [drm]
[14616.937220] drm_release+0x5e/0x100 [drm]
[14616.937234] __fput+0x9f/0x280
[14616.937239] ____fput+0xe/0x20
[14616.937241] task_work_run+0x61/0x90
[14616.937246] exit_to_user_mode_prepare+0x215/0x220
[14616.937251] syscall_exit_to_user_mode+0x2a/0x60
[14616.937254] do_syscall_64+0x48/0x90
[14616.937257] entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix sdma v4 sw fini error
Fix sdma v4 sw fini error for sdma 4.2.2 to
solve the following general protection fault
[ +0.108196] general protection fault, probably for non-canonical
address 0xd5e5a4ae79d24a32: 0000 [#1] PREEMPT SMP PTI
[ +0.000018] RIP: 0010:free_fw_priv+0xd/0x70
[ +0.000022] Call Trace:
[ +0.000012] <TASK>
[ +0.000011] release_firmware+0x55/0x80
[ +0.000021] amdgpu_ucode_release+0x11/0x20 [amdgpu]
[ +0.000415] amdgpu_sdma_destroy_inst_ctx+0x4f/0x90 [amdgpu]
[ +0.000360] sdma_v4_0_sw_fini+0xce/0x110 [amdgpu] |
| In the Linux kernel, the following vulnerability has been resolved:
net: usbnet: Fix WARNING in usbnet_start_xmit/usb_submit_urb
The syzbot fuzzer identified a problem in the usbnet driver:
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 754 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Modules linked in:
CPU: 0 PID: 754 Comm: kworker/0:2 Not tainted 6.4.0-rc7-syzkaller-00014-g692b7dc87ca6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Workqueue: mld mld_ifc_work
RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Code: 7c 24 18 e8 2c b4 5b fb 48 8b 7c 24 18 e8 42 07 f0 fe 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 a0 c9 fc 8a e8 5a 6f 23 fb <0f> 0b e9 58 f8 ff ff e8 fe b3 5b fb 48 81 c5 c0 05 00 00 e9 84 f7
RSP: 0018:ffffc9000463f568 EFLAGS: 00010086
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
RDX: ffff88801eb28000 RSI: ffffffff814c03b7 RDI: 0000000000000001
RBP: ffff8881443b7190 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000003
R13: ffff88802a77cb18 R14: 0000000000000003 R15: ffff888018262500
FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556a99c15a18 CR3: 0000000028c71000 CR4: 0000000000350ef0
Call Trace:
<TASK>
usbnet_start_xmit+0xfe5/0x2190 drivers/net/usb/usbnet.c:1453
__netdev_start_xmit include/linux/netdevice.h:4918 [inline]
netdev_start_xmit include/linux/netdevice.h:4932 [inline]
xmit_one net/core/dev.c:3578 [inline]
dev_hard_start_xmit+0x187/0x700 net/core/dev.c:3594
...
This bug is caused by the fact that usbnet trusts the bulk endpoint
addresses its probe routine receives in the driver_info structure, and
it does not check to see that these endpoints actually exist and have
the expected type and directions.
The fix is simply to add such a check. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: Rework long task execution when adding/deleting entries
When adding/deleting large number of elements in one step in ipset, it can
take a reasonable amount of time and can result in soft lockup errors. The
patch 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of
consecutive elements to add/delete") tried to fix it by limiting the max
elements to process at all. However it was not enough, it is still possible
that we get hung tasks. Lowering the limit is not reasonable, so the
approach in this patch is as follows: rely on the method used at resizing
sets and save the state when we reach a smaller internal batch limit,
unlock/lock and proceed from the saved state. Thus we can avoid long
continuous tasks and at the same time removed the limit to add/delete large
number of elements in one step.
The nfnl mutex is held during the whole operation which prevents one to
issue other ipset commands in parallel. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: mark requests for GuC virtual engines to avoid use-after-free
References to i915_requests may be trapped by userspace inside a
sync_file or dmabuf (dma-resv) and held indefinitely across different
proceses. To counter-act the memory leaks, we try to not to keep
references from the request past their completion.
On the other side on fence release we need to know if rq->engine
is valid and points to hw engine (true for non-virtual requests).
To make it possible extra bit has been added to rq->execution_mask,
for marking virtual engines.
(cherry picked from commit 280410677af763f3871b93e794a199cfcf6fb580) |
| In the Linux kernel, the following vulnerability has been resolved:
ip_vti: fix potential slab-use-after-free in decode_session6
When ip_vti device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when ip_vti device sends IPv6 packets.
As commit f855691975bb ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Check for probe() id argument being NULL
The probe() id argument may be NULL in 2 scenarios:
1. brcmf_pcie_pm_leave_D3() calling brcmf_pcie_probe() to reprobe
the device.
2. If a user tries to manually bind the driver from sysfs then the sdio /
pcie / usb probe() function gets called with NULL as id argument.
1. Is being hit by users causing the following oops on resume and causing
wifi to stop working:
BUG: kernel NULL pointer dereference, address: 0000000000000018
<snip>
Hardware name: Dell Inc. XPS 13 9350/0PWNCR, BIDS 1.13.0 02/10/2020
Workgueue: events_unbound async_run_entry_fn
RIP: 0010:brcmf_pcie_probe+Ox16b/0x7a0 [brcmfmac]
<snip>
Call Trace:
<TASK>
brcmf_pcie_pm_leave_D3+0xc5/8x1a0 [brcmfmac be3b4cefca451e190fa35be8f00db1bbec293887]
? pci_pm_resume+0x5b/0xf0
? pci_legacy_resume+0x80/0x80
dpm_run_callback+0x47/0x150
device_resume+0xa2/0x1f0
async_resume+0x1d/0x30
<snip>
Fix this by checking for id being NULL.
In the PCI and USB cases try a manual lookup of the id so that manually
binding the driver through sysfs and more importantly brcmf_pcie_probe()
on resume will work.
For the SDIO case there is no helper to do a manual sdio_device_id lookup,
so just directly error out on a NULL id there. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: fix integer overflow in nl80211_parse_mbssid_elems()
nl80211_parse_mbssid_elems() uses a u8 variable num_elems to count the
number of MBSSID elements in the nested netlink attribute attrs, which can
lead to an integer overflow if a user of the nl80211 interface specifies
256 or more elements in the corresponding attribute in userspace. The
integer overflow can lead to a heap buffer overflow as num_elems determines
the size of the trailing array in elems, and this array is thereafter
written to for each element in attrs.
Note that this vulnerability only affects devices with the
wiphy->mbssid_max_interfaces member set for the wireless physical device
struct in the device driver, and can only be triggered by a process with
CAP_NET_ADMIN capabilities.
Fix this by checking for a maximum of 255 elements in attrs. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Make intel_get_crtc_new_encoder() less oopsy
The point of the WARN was to print something, not oops
straight up. Currently that is precisely what happens
if we can't find the connector for the crtc in the atomic
state. Get the dev pointer from the atomic state instead
of the potentially NULL encoder to avoid that.
(cherry picked from commit 3b6692357f70498f617ea1b31a0378070a0acf1c) |
