| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa/mlx5: Fix release of uninitialized resources on error path
The commit in the fixes tag made sure that mlx5_vdpa_free()
is the single entrypoint for removing the vdpa device resources
added in mlx5_vdpa_dev_add(), even in the cleanup path of
mlx5_vdpa_dev_add().
This means that all functions from mlx5_vdpa_free() should be able to
handle uninitialized resources. This was not the case though:
mlx5_vdpa_destroy_mr_resources() and mlx5_cmd_cleanup_async_ctx()
were not able to do so. This caused the splat below when adding
a vdpa device without a MAC address.
This patch fixes these remaining issues:
- Makes mlx5_vdpa_destroy_mr_resources() return early if called on
uninitialized resources.
- Moves mlx5_cmd_init_async_ctx() early on during device addition
because it can't fail. This means that mlx5_cmd_cleanup_async_ctx()
also can't fail. To mirror this, move the call site of
mlx5_cmd_cleanup_async_ctx() in mlx5_vdpa_free().
An additional comment was added in mlx5_vdpa_free() to document
the expectations of functions called from this context.
Splat:
mlx5_core 0000:b5:03.2: mlx5_vdpa_dev_add:3950:(pid 2306) warning: No mac address provisioned?
------------[ cut here ]------------
WARNING: CPU: 13 PID: 2306 at kernel/workqueue.c:4207 __flush_work+0x9a/0xb0
[...]
Call Trace:
<TASK>
? __try_to_del_timer_sync+0x61/0x90
? __timer_delete_sync+0x2b/0x40
mlx5_vdpa_destroy_mr_resources+0x1c/0x40 [mlx5_vdpa]
mlx5_vdpa_free+0x45/0x160 [mlx5_vdpa]
vdpa_release_dev+0x1e/0x50 [vdpa]
device_release+0x31/0x90
kobject_cleanup+0x37/0x130
mlx5_vdpa_dev_add+0x327/0x890 [mlx5_vdpa]
vdpa_nl_cmd_dev_add_set_doit+0x2c1/0x4d0 [vdpa]
genl_family_rcv_msg_doit+0xd8/0x130
genl_family_rcv_msg+0x14b/0x220
? __pfx_vdpa_nl_cmd_dev_add_set_doit+0x10/0x10 [vdpa]
genl_rcv_msg+0x47/0xa0
? __pfx_genl_rcv_msg+0x10/0x10
netlink_rcv_skb+0x53/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x27b/0x3b0
netlink_sendmsg+0x1f7/0x430
__sys_sendto+0x1fa/0x210
? ___pte_offset_map+0x17/0x160
? next_uptodate_folio+0x85/0x2b0
? percpu_counter_add_batch+0x51/0x90
? filemap_map_pages+0x515/0x660
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x7b/0x2c0
? do_read_fault+0x108/0x220
? do_pte_missing+0x14a/0x3e0
? __handle_mm_fault+0x321/0x730
? count_memcg_events+0x13f/0x180
? handle_mm_fault+0x1fb/0x2d0
? do_user_addr_fault+0x20c/0x700
? syscall_exit_work+0x104/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f0c25b0feca
[...]
---[ end trace 0000000000000000 ]--- |
| The installer in SIGB PMB before and fixed in v.8.0.1.2 allows remote code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pds: Fix missing detach_ioas op
When CONFIG_IOMMUFD is enabled and a device is bound to the pds_vfio_pci
driver, the following WARN_ON() trace is seen and probe fails:
WARNING: CPU: 0 PID: 5040 at drivers/vfio/vfio_main.c:317 __vfio_register_dev+0x130/0x140 [vfio]
<...>
pds_vfio_pci 0000:08:00.1: probe with driver pds_vfio_pci failed with error -22
This is because the driver's vfio_device_ops.detach_ioas isn't set.
Fix this by using the generic vfio_iommufd_physical_detach_ioas
function. |
| Claude Code is an agentic coding tool. Prior to Claude Code version 1.0.39, when using Claude Code with Yarn versions 2.0+, Yarn plugins are auto-executed when running yarn --version. This could lead to a bypass of the directory trust dialog in Claude Code, as plugins would be executed prior to the user accepting the risks of working in an untrusted directory. Users running Yarn Classic were unaffected by this issue. This issue has been fixed in version 1.0.39. Users on standard Claude Code auto-update will have received this fix automatically. Users performing manual updates are advised to update to the latest version. |
| Improper neutralisation of input in Revive Adserver 6.0.0+ causes a reflected XSS attack in the banner-zone.php script. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: avoid NULL dereference when RX problematic packet on unsupported 6 GHz band
With a quite rare chance, RX report might be problematic to make SW think
a packet is received on 6 GHz band even if the chip does not support 6 GHz
band actually. Since SW won't initialize stuffs for unsupported bands, NULL
dereference will happen then in the sequence, rtw89_vif_rx_stats_iter() ->
rtw89_core_cancel_6ghz_probe_tx(). So, add a check to avoid it.
The following is a crash log for this case.
BUG: kernel NULL pointer dereference, address: 0000000000000032
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 1907 Comm: irq/131-rtw89_p Tainted: G U 6.6.56-05896-g89f5fb0eb30b #1 (HASH:1400 4)
Hardware name: Google Telith/Telith, BIOS Google_Telith.15217.747.0 11/12/2024
RIP: 0010:rtw89_vif_rx_stats_iter+0xd2/0x310 [rtw89_core]
Code: 4c 89 7d c8 48 89 55 c0 49 8d 44 24 02 48 89 45 b8 45 31 ff eb 11
41 c6 45 3a 01 41 b7 01 4d 8b 6d 00 4d 39 f5 74 42 8b 43 10 <41> 33 45
32 0f b7 4b 14 66 41 33 4d 36 0f b7 c9 09 c1 74 d8 4d 85
RSP: 0018:ffff9f3080138ca0 EFLAGS: 00010246
RAX: 00000000b8bf5770 RBX: ffff91b5e8c639c0 RCX: 0000000000000011
RDX: ffff91b582de1be8 RSI: 0000000000000000 RDI: ffff91b5e8c639e6
RBP: ffff9f3080138d00 R08: 0000000000000000 R09: 0000000000000000
R10: ffff91b59de70000 R11: ffffffffc069be50 R12: ffff91b5e8c639e4
R13: 0000000000000000 R14: ffff91b5828020b8 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff91b8efa40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000032 CR3: 00000002bf838000 CR4: 0000000000750ee0
PKRU: 55555554
Call Trace:
<IRQ>
? __die_body+0x68/0xb0
? page_fault_oops+0x379/0x3e0
? exc_page_fault+0x4f/0xa0
? asm_exc_page_fault+0x22/0x30
? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)]
? rtw89_vif_rx_stats_iter+0xd2/0x310 [rtw89_core (HASH:1400 5)]
__iterate_interfaces+0x59/0x110 [mac80211 (HASH:1400 6)]
? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)]
? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)]
ieee80211_iterate_active_interfaces_atomic+0x36/0x50 [mac80211 (HASH:1400 6)]
rtw89_core_rx_to_mac80211+0xfd/0x1b0 [rtw89_core (HASH:1400 5)]
rtw89_core_rx+0x43a/0x980 [rtw89_core (HASH:1400 5)] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix WARN_ON for monitor mode on some devices
On devices without WANT_MONITOR_VIF (and probably without
channel context support) we get a WARN_ON for changing the
per-link setting of a monitor interface.
Since we already skip AP_VLAN interfaces and MONITOR with
WANT_MONITOR_VIF and/or NO_VIRTUAL_MONITOR should update
the settings, catch this in the link change code instead
of the warning. |
| A vulnerability has been found in macrozheng mall up to 1.0.3. This impacts an unknown function of the component Registration. Such manipulation leads to weak password requirements. The attack can be executed remotely. Attacks of this nature are highly complex. The exploitability is said to be difficult. The vendor deleted the GitHub issue for this vulnerability without and explanation. |
| Misskey is an open source, federated social media platform.In affected versions missing validation in `NoteCreateService.insertNote`, `ApPersonService.createPerson`, and `ApPersonService.updatePerson` allows an attacker to control the target of any "origin" links (such as the "view on remote instance" banner). Any HTTPS URL can be set, even if it belongs to a different domain than the note / user. Vulnerable Misskey instances will use the unverified URL for several clickable links, allowing an attacker to conduct phishing or other attacks against remote users. This issue has been addressed in version 2024.11.0-alpha.3. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Misskey is an open source, federated social media platform. In affected versions missing validation in `ApInboxService.update` allows an attacker to modify the result of polls belonging to another user. No authentication is required, except for a valid signature from any actor on any remote instance. Vulnerable Misskey instances will accept spoofed updates for remote polls. Local polls are unaffected. This issue has been addressed in version 2024.11.0-alpha.3. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Misskey is an open source, federated social media platform. Some APIs using `HttpRequestService` do not properly check the target host. This vulnerability allows an attacker to send POST or GET requests to the internal server, which may result in a SSRF attack.It allows an attacker to send POST or GET requests (with some controllable URL parameters) to private IPs, enabling further attacks on internal servers. This issue has been addressed in version 2024.11.0-alpha.3. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Misskey is an open source, federated social media platform. Starting in version 12.109.0 and prior to version 2025.2.0-alpha.0, due to a lack of CSRF protection and the lack of proper security attributes in the authentication cookies of Bull's dashboard, some of the APIs of bull-board may be subject to CSRF attacks. There is a risk of this vulnerability being used for attacks with relatively large impact on availability and integrity, such as the ability to add arbitrary jobs. This vulnerability was fixed in 2025.2.0-alpha.0. As a workaround, block all access to the `/queue` directory with a web application firewall (WAF). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: Fix error code in iwl_op_mode_dvm_start()
Preserve the error code if iwl_setup_deferred_work() fails. The current
code returns ERR_PTR(0) (which is NULL) on this path. I believe the
missing error code potentially leads to a use after free involving
debugfs. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: canaan: k230: add NULL check in DT parse
Add a NULL check for the return value of of_get_property() when
retrieving the "pinmux" property in the group parser. This avoids
a potential NULL pointer dereference if the property is missing
from the device tree node.
Also fix a typo ("sintenel") in the device ID match table comment,
correcting it to "sentinel". |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: canaan: k230: Fix order of DT parse and pinctrl register
Move DT parse before pinctrl register. This ensures that device tree
parsing is done before calling devm_pinctrl_register() to prevent using
uninitialized pin resources. |
| IBM Watson Studio on Cloud Pak for Data 4.0 and 5.0 is vulnerable to cross-site scripting. This vulnerability allows an authenticated user to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. |
| In the Linux kernel, the following vulnerability has been resolved:
landlock: Fix warning from KUnit tests
get_id_range() expects a positive value as first argument but
get_random_u8() can return 0. Fix this by clamping it.
Validated by running the test in a for loop for 1000 times.
Note that MAX() is wrong as it is only supposed to be used for
constants, but max() is good here.
[..] ok 9 test_range2_rand1
[..] ok 10 test_range2_rand2
[..] ok 11 test_range2_rand15
[..] ------------[ cut here ]------------
[..] WARNING: CPU: 6 PID: 104 at security/landlock/id.c:99 test_range2_rand16 (security/landlock/id.c:99 (discriminator 1) security/landlock/id.c:234 (discriminator 1))
[..] Modules linked in:
[..] CPU: 6 UID: 0 PID: 104 Comm: kunit_try_catch Tainted: G N 6.16.0-rc1-dev-00001-g314a2f98b65f #1 PREEMPT(undef)
[..] Tainted: [N]=TEST
[..] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[..] RIP: 0010:test_range2_rand16 (security/landlock/id.c:99 (discriminator 1) security/landlock/id.c:234 (discriminator 1))
[..] Code: 49 c7 c0 10 70 30 82 4c 89 ff 48 c7 c6 a0 63 1e 83 49 c7 45 a0 e0 63 1e 83 e8 3f 95 17 00 e9 1f ff ff ff 0f 0b e9 df fd ff ff <0f> 0b ba 01 00 00 00 e9 68 fe ff ff 49 89 45 a8 49 8d 4d a0 45 31
[..] RSP: 0000:ffff888104eb7c78 EFLAGS: 00010246
[..] RAX: 0000000000000000 RBX: 000000000870822c RCX: 0000000000000000
^^^^^^^^^^^^^^^^
[..]
[..] Call Trace:
[..]
[..] ---[ end trace 0000000000000000 ]---
[..] ok 12 test_range2_rand16
[..] # landlock_id: pass:12 fail:0 skip:0 total:12
[..] # Totals: pass:12 fail:0 skip:0 total:12
[..] ok 1 landlock_id
[mic: Minor cosmetic improvements] |
| A vulnerability was found in macrozheng mall up to 1.0.3. This vulnerability affects the function paySuccess of the file /order/paySuccess. The manipulation of the argument orderId results in authorization bypass. The attack can be launched remotely. The exploit has been made public and could be used. |
| Insertion of Sensitive Information into Log File vulnerability in upKeeper Solutions upKeeper Manager allows Use of Known Domain Credentials.This issue affects upKeeper Manager: from 5.0.0 before 5.2.12. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: dts: qcom: qcs615: fix a crash issue caused by infinite loop for Coresight
An infinite loop has been created by the Coresight devices. When only a
source device is enabled, the coresight_find_activated_sysfs_sink function
is recursively invoked in an attempt to locate an active sink device,
ultimately leading to a stack overflow and system crash. Therefore, disable
the replicator1 to break the infinite loop and prevent a potential stack
overflow.
replicator1_out -> funnel_swao_in6 -> tmc_etf_swao_in -> tmc_etf_swao_out
| |
replicator1_in replicator_swao_in
| |
replicator0_out1 replicator_swao_out0
| |
replicator0_in funnel_in1_in3
| |
tmc_etf_out <- tmc_etf_in <- funnel_merg_out <- funnel_merg_in1 <- funnel_in1_out
[call trace]
dump_backtrace+0x9c/0x128
show_stack+0x20/0x38
dump_stack_lvl+0x48/0x60
dump_stack+0x18/0x28
panic+0x340/0x3b0
nmi_panic+0x94/0xa0
panic_bad_stack+0x114/0x138
handle_bad_stack+0x34/0xb8
__bad_stack+0x78/0x80
coresight_find_activated_sysfs_sink+0x28/0xa0 [coresight]
coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight]
coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight]
coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight]
coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight]
...
coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight]
coresight_enable_sysfs+0x80/0x2a0 [coresight]
side effect after the change:
Only trace data originating from AOSS can reach the ETF_SWAO and EUD sinks. |
