| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the NX-OS CLI privilege levels of Cisco UCS Manager Software could allow an authenticated, local attacker with read-only privileges to modify files and perform unauthorized actions on an affected system.
This vulnerability exists because unnecessary privileges are given to the user. An attacker could exploit this vulnerability by authenticating to a device as a read-only user and connecting to the NX-OS CLI. A successful exploit could allow the attacker to create or overwrite files in the file system or perform limited privileged actions on an affected device. |
| A vulnerability with the Ethernet VPN (EVPN) Layer 2 ingress packet processing of Cisco Nexus 3600 Platform Switches and Cisco Nexus 9500-R Series Switching Platforms could allow an unauthenticated, adjacent attacker to trigger a Layer 2 traffic loop.
This vulnerability is due to a logic error when processing a crafted Layer 2 ingress frame. An attacker could exploit this vulnerability by sending a stream of crafted Ethernet frames through the targeted device. A successful exploit could allow the attacker to cause a Layer 2 Virtual eXtensible LAN (VxLAN) traffic loop, which, in turn, could result in a denial of service (DoS) condition. This Layer 2 loop could oversubscribe the bandwidth on network interfaces, which would result in all data plane traffic being dropped. To exploit this vulnerability, the attacker must be Layer 2-adjacent to the affected device.
Note: To stop active exploitation of this vulnerability, manual intervention is required to both stop the crafted traffic and flap all involved network interfaces. For additional assistance if a Layer 2 loop that is related to this vulnerability is suspected, contact the Cisco Technical Assistance Center (TAC) or the proper support provider. |
| A vulnerability in the web-based management interface of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface.
This vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit this vulnerability by injecting malicious data into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have valid credentials for a user account with the role of Administrator or AAA Administrator. |
| A vulnerability in the web-based management interface of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, local attacker with administrative privileges to perform command injection attacks on an affected system and elevate privileges to root.
This vulnerability is due to insufficient input validation of command arguments supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system of the affected device with root-level privileges. |
| A vulnerability in the Object Model CLI component of Cisco Application Policy Infrastructure Controller (APIC) could allow an authenticated, local attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. To exploit this vulnerability, the attacker must have valid user credentials and any role that includes CLI access.
This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by issuing crafted commands at the CLI prompt. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the Data Collection Agent (DCA) feature of Cisco Catalyst SD-WAN Manager could allow an authenticated, local attacker to gain DCA user privileges on an affected system. To exploit this vulnerability, the attacker must have valid vmanage credentials on the affected system.
This vulnerability is due to the presence of a credential file for the DCA user on an affected system. An attacker could exploit this vulnerability by accessing the filesystem as a low-privileged user and reading the file that contains the DCA password from that affected system. A successful exploit could allow the attacker to access another affected system and gain DCA user privileges.
Note: Cisco Catalyst SD-WAN Manager releases 20.18 and later are not affected by this vulnerability. |
| A vulnerability in the API user authentication of Cisco Catalyst SD-WAN Manager could allow an unauthenticated, remote attacker to gain access to an affected system as a user who has the netadmin role.
The vulnerability is due to improper authentication for requests that are sent to the API. An attacker could exploit this vulnerability by sending a crafted request to the API of an affected system. A successful exploit could allow the attacker to execute commands with the privileges of the netadmin role.
Note: Cisco Catalyst SD-WAN Manager releases 20.18 and later are not affected by this vulnerability. |
| This vulnerability is caused by a CWE‑159: "Improper Handling of Invalid Use of Special Elements" weakness, which leads to an unrecoverable inconsistency in the CLFS.sys driver. This condition forces a call to the KeBugCheckEx function, allowing an unprivileged user to trigger a system crash. Microsoft silently fixed this vulnerability in the September 2025 cumulative update for Windows 11 2024 LTSC and Windows Server 2025. Windows 25H2 (released in September) was released with the patch. Windows 1123h2 and earlier versions remain vulnerable. |
| LORIS (Longitudinal Online Research and Imaging System) is a self-hosted web application that provides data- and project-management for neuroimaging research. Prior to versions 26.0.5, 27.0.2, and 28.0.0, an authenticated user with sufficient privileges can exploit a path traversal vulnerability to upload a malicious file to an arbitrary location on the server. Once uploaded, the file can be used to achieve remote code execution (RCE). An attacker must be authenticated and have the appropriate permissions to exploit this issue. If the server is configured as read-only, remote code execution (RCE) is not possible; however, the malicious file upload may still be achievable. This problem is fixed in LORIS v26.0.5 and above, v27.0.2 and above, and v28.0.0 and above. As a workaround, LORIS administrators can disable the media module if it is not being used. |
| VMware Aria Operations contains a stored cross-site scripting vulnerability. A malicious actor with privileges to create custom benchmarks may be able to inject script to perform administrative actions in VMware Aria Operations.
To remediate CVE-2026-22720, apply the patches listed in the 'Fixed Version' column of the 'Response Matrix' of VMSA-2026-0001 https://support.broadcom.com/web/ecx/support-content-notification/-/external/content/SecurityAdvisories/0/36947https:// . |
| VMware Aria Operations contains a privilege escalation vulnerability. A malicious actor with privileges in vCenter to access Aria Operations may leverage this vulnerability to obtain administrative access in VMware Aria Operations. To remediate CVE-2026-22721, apply the patches listed in the 'Fixed Version' column of the 'Response Matrix' found in VMSA-2026-0001 https://support.broadcom.com/web/ecx/support-content-notification/-/external/content/SecurityAdvisories/0/36947 . |
| Ethereum Name Service (ENS) is a distributed, open, and extensible naming system based on the Ethereum blockchain. In versions 1.6.2 and prior, the `RSASHA256Algorithm` and `RSASHA1Algorithm` contracts fail to validate PKCS#1 v1.5 padding structure when verifying RSA signatures. The contracts only check if the last 32 (or 20) bytes of the decrypted signature match the expected hash. This enables Bleichenbacher's 2006 signature forgery attack against DNS zones using RSA keys with low public exponents (e=3). Two ENS-supported TLDs (.cc and .name) use e=3 for their Key Signing Keys, allowing any domain under these TLDs to be fraudulently claimed on ENS without DNS ownership. Apatch was merged at commit c76c5ad0dc9de1c966443bd946fafc6351f87587. Possible workarounds include deploying the patched contracts and pointing DNSSECImpl.setAlgorithm to the deployed contract. |
| LORIS (Longitudinal Online Research and Imaging System) is a self-hosted web application that provides data- and project-management for neuroimaging research. Starting in version 24.0.0 and prior to versions 26.0.5, 27.0.2, and 28.0.0, an authenticated user with the appropriate authorization can read configuration files on the server by exploiting a path traversal vulnerability. Some of these files contain hard-coded credentials. The vulnerability allows an attacker to read configuration files containing hard-coded credentials. The attacker could then authenticate to the database or other services if those credentials are reused. The attacker must be authenticated and have the required permissions. However, the vulnerability is easy to exploit and the application source code is public. This problem is fixed in LORIS v26.0.5 and v27.0.2 and above, and v28.0.0 and above. As a workaround, the electrophysiogy_browser in LORIS can be disabled by an administrator using the module manager. |
| Kruise provides automated management of large-scale applications on Kubernetes. Prior to versions 1.8.3 and 1.7.5, PodProbeMarker allows defining custom probes with TCPSocket or HTTPGet handlers. The webhook validation does not restrict the Host field in these probe configurations. Since kruise-daemon runs with hostNetwork=true, it executes probes from the node network namespace. An attacker with PodProbeMarker creation permission can specify arbitrary Host values to trigger SSRF from the node, perform port scanning, and receive response feedback through NodePodProbe status messages. Versions 1.8.3 and 1.7.5 patch the issue. |
| The administrative credentials can be extracted through application API responses, mobile application reverse engineering, and device firmware reverse engineering. The exposure may result in an attacker gaining full administrative access to the Gardyn IoT Hub exposing connected devices to malicious control. |
| Vikunja is an open-source self-hosted task management platform. Prior to version 2.0.0, the application allows users to upload SVG files as task attachments. SVG is an XML-based format that supports JavaScript execution through elements such as <script> tags or event handlers like onload. The application does not sanitize SVG content before storing it. When the uploaded SVG file is accessed via its direct URL, it is rendered inline in the browser under the application's origin. As a result, embedded JavaScript executes in the context of the authenticated user. Because the authentication token is stored in localStorage, it is accessible via JavaScript and can be retrieved by a malicious payload. Version 2.0.0 patches this issue. |
| ZITADEL is an open source identity management platform. Starting in version 2.31.0 and prior to versions 3.4.7 and 4.11.0, opaque OIDC access tokens in the v2 format truncated to 80 characters are still considered valid. Zitadel uses a symmetric AES encryption for opaque tokens. The cleartext payload is a concatenation of a couple of identifiers, such as a token ID and user ID. Internally Zitadel has 2 different versions of token payloads. v1 tokens are no longer created, but are still verified as to not invalidate existing session after upgrade. The cleartext payload has a format of `<token_id>:<user_id>`. v2 tokens distinguished further where the `token_id` is of the format `v2_<oidc_session_id>-at_<access_token_id>`. V1 token authZ/N session data is retrieved from the database using the (simple) `token_id` value and `user_id` value. The `user_id` (called `subject` in some parts of our code) was used as being the trusted user ID. V2 token authZ/N session data is retrieved from the database using the `oidc_session_id` and `access_token_id` and in this case the `user_id` from the token is ignored and taken from the session data in the database. By truncating the token to 80 chars, the user_id is now missing from the cleartext of the v2 token. The back-end still accepts this for above reasons. This issue is not considered exploitable, but may look awkward when reproduced. The patch in versions 4.11.0 and 3.4.7 resolves the issue by verifying the `user_id` from the token against the session data from the database. No known workarounds are available. |
| ZITADEL is an open source identity management platform. Prior to versions 4.11.1 and 3.4.7, a vulnerability in Zitadel's self-management capability allowed users to mark their email and phone as verified without going through an actual verification process. The patch in versions 4.11.1 and 3.4.7 resolves the issue by requiring the correct permission in case the verification flag is provided and only allows self-management of the email address and/or phone number itself. If an upgrade is not possible, an action (v2) could be used to prevent setting the verification flag on the own user. |
| Vikunja is an open-source self-hosted task management platform. Prior to version 2.0.0, the application allows users to set weak passwords (e.g., 1234, password) without enforcing minimum strength requirements. Additionally, active sessions remain valid after a user changes their password. An attacker who compromises an account (via brute-force or credential stuffing) can maintain persistent access even after the victim resets their password. Version 2.0.0 contains a fix. |
| Model Context Protocol Servers is a collection of reference implementations for the model context protocol (MCP). In mcp-server-git versions prior to 2026.1.14, the git_add tool did not validate that file paths provided in the files argument were within the repository boundaries. Because the tool used GitPython's repo.index.add() rather than the Git CLI, relative paths containing `../` sequences that resolve outside the repository were accepted and staged into the Git index. Users are advised to upgrade to 2026.1.14 or newer to remediate this issue. |
